Date: Wed, 30 Dec 1998 14:10:52 +0100 (EET) From: Marcin Zurakowski <marcin@zse.edu.pl> To: aic7xxx@FreeBSD.ORG Subject: Linux SCSI AIC7xxx driver from 2.0.36 Message-ID: <Pine.LNX.4.04.9812301408120.8410-100000@serwer.zse.edu.pl>
next in thread | raw e-mail | index | archive | help
Hi,
I've got a little problem.
I have a Adaptec AIC-7770 adapter and hard disk. I made a partitons on it
under 2.0.35, and leter a I've upgraded to 2.0.36. Both of them (2.0.35
and 2.0.36 has the same SCSI configuration).
Under 2.0.36 fdisk display errors:
------------------------------------------------------
Using /dev/sda as default device!
Command (m for help):
Disk /dev/sda: 255 heads, 63 sectors, 274 cylinders
Units = cylinders of 16065 * 512 bytes
Device Boot Begin Start End Blocks Id System
/dev/sda1 1 1 64 513008 83 Linux native
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(0, 1, 1) logical=(0, 0, 33)
Partition 1 has different physical/logical endings:
phys=(500, 63, 32) logical=(63, 221, 30)
Partition 1 does not end on cylinder boundary:
phys=(500, 63, 32) should be (500, 254, 63)
/dev/sda2 502 64 80 123904 82 Linux swap
................
--------------------------------------------------------
,but everything is clear under 2.0.35.
It's strange but under 2.0.36 system is working ok, If I hadn't run fdisk
I would have never discover this error.
I attached dmesg files from 2.0.35 and 2.0.36
What should I do?
Marcin Zurakowski
-------------------
ZSE Administrator
-------------------
--------- dmesg from 2.0.35 --------------------
Console: 16 point font, 400 scans
Console: mono EGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000f6bc0
pcibios_init : BIOS32 Service Directory entry at 0xfd206
pcibios_init : PCI BIOS revision 2.10 entry at 0xfd551
Probing PCI hardware.
PCI bridge optimization.
Cache L2: Not supported.
CPU-PCI posted write: on.
CPU-Memory posted write: off.Changed! Now on.
PCI-Memory posted write: on.
PCI burst: on.
Calibrating delay loop.. ok - 53.25 BogoMIPS
Memory: 30972k/32768k available (680k kernel code, 384k reserved, 732k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: ICMP, UDP, TCP
VFS: Diskquotas version dquot_5.6.0 initialized
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Intel Pentium with F0 0F bug - workaround enabled.
alias mapping IDT readonly ... ... done
Linux version 2.0.35 (root@serwer.zse.edu.pl) (gcc version 2.7.2.3) #2 Tue Oct 13 07:54:54 CEST 1998
Starting kswapd v 1.4.2.2
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
tty01 at 0x02f8 (irq = 3) is a 16550A
lp1 at 0x0378, (polling)
PS/2 auxiliary pointing device detected -- driver installed.
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
(scsi0) <Adaptec AIC-7770 SCSI host adapter> found at EISA slot 11
(scsi0) Twin Channel, A SCSI ID 7, B SCSI ID 7, 4/255 SCBs
(scsi0) BIOS enabled, IO Port 0xbc00, IRQ 14
(scsi0) IO Memory at 0x0, MMAP Memory at 0x0
(scsi0) Resetting channel B
(scsi0) Resetting channel A
(scsi0) Downloading sequencer code... 414 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.0.19/3.2.4
<Adaptec AIC-7770 SCSI host adapter>
scsi : 1 host.
(scsi0:0:-1:-1) Scanning channel for devices.
Vendor: Quantum Model: XP32150W Rev: L912
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: SONY Model: CD-ROM CDU-76S Rev: 1.1c
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 5, lun 0
(scsi0:1:-1:-1) Scanning channel for devices.
scsi : detected 1 SCSI cdrom 1 SCSI disk total.
(scsi0:0:0:0) Synchronous at 10.0MHz, offset 15.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 4406960 [2151 MB] [2.2 GB]
ne2k-pci.c:v0.99L 2/7/98 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0xfce0, IRQ 9.
eth0: PCI NE2000 found at 0xfce0, IRQ 9, 00:40:05:66:08:AF.
Partition check:
sda: sda1 sda2 sda3
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 123900k swap-space (priority -1)
---------------------------------------------------
-----------------dmesg from 2.0.36 ----------------
Memory: sized by int13 088h
Console: 16 point font, 400 scans
Console: mono EGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000f6bc0
pcibios_init : BIOS32 Service Directory entry at 0xfd206
pcibios_init : PCI BIOS revision 2.10 entry at 0xfd551
Probing PCI hardware.
PCI bridge optimization.
Cache L2: Not supported.
CPU-PCI posted write: on.
CPU-Memory posted write: off.Changed! Now on.
PCI-Memory posted write: on.
PCI burst: on.
Calibrating delay loop.. ok - 53.25 BogoMIPS
Memory: 30956k/32768k available (692k kernel code, 384k reserved, 736k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: ICMP, UDP, TCP
VFS: Diskquotas version dquot_5.6.0 initialized
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Intel Pentium with F0 0F bug - workaround enabled.
alias mapping IDT readonly ... ... done
Linux version 2.0.36 (root@serwer.zse.edu.pl) (gcc version 2.7.2.3) #1 Fri Nov 20 14:24:25 CET 1998
Starting kswapd v 1.4.2.2
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
tty01 at 0x02f8 (irq = 3) is a 16550A
lp1 at 0x0378, (polling)
PS/2 auxiliary pointing device detected -- driver installed.
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
(scsi0) <Adaptec AIC-7770 SCSI host adapter> found at EISA slot 11
(scsi0) Twin Channel, A SCSI ID 7, B SCSI ID 7, 4/255 SCBs
(scsi0) Downloading sequencer code... 423 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.4/3.2.4
<Adaptec AIC-7770 SCSI host adapter>
scsi : 1 host.
Vendor: Quantum Model: XP32150W Rev: L912
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: SONY Model: CD-ROM CDU-76S Rev: 1.1c
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 5, lun 0
scsi : detected 1 SCSI cdrom 1 SCSI disk total.
(scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 4406960 [2151 MB] [2.2 GB]
ne2k-pci.c:v0.99L 2/7/98 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0xfce0, IRQ 9.
eth0: PCI NE2000 found at 0xfce0, IRQ 9, 00:40:05:66:08:AF.
Partition check:
sda: sda1 sda2 sda3
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 123900k swap-space (priority -1)
----------------------------------------------------------------
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.04.9812301408120.8410-100000>