From owner-freebsd-current  Wed May 12 13:19:25 1999
Delivered-To: freebsd-current@freebsd.org
Received: from uni4nn.gn.iaf.nl (osmium.gn.iaf.nl [193.67.144.12])
	by hub.freebsd.org (Postfix) with ESMTP id 9810014FCB
	for <current@FreeBSD.ORG>; Wed, 12 May 1999 13:19:17 -0700 (PDT)
	(envelope-from wilko@yedi.iaf.nl)
Received: from yedi.iaf.nl (uucp@localhost)
	  by uni4nn.gn.iaf.nl (8.9.2/8.9.2) with UUCP id UAA01979;
	  Wed, 12 May 1999 20:56:16 +0200 (MET DST)
Received: (from wilko@localhost)
	by yedi.iaf.nl (8.9.3/8.9.3) id UAA01226;
	Wed, 12 May 1999 20:43:45 +0200 (CEST)
	(envelope-from wilko)
From: Wilko Bulte <wilko@yedi.iaf.nl>
Message-Id: <199905121843.UAA01226@yedi.iaf.nl>
Subject: Re: Sometimes again SCSI don't finish to boot
In-Reply-To: <4.1.19990512164444.01268a20@194.184.65.4> from Gianmarco Giovannelli at "May 12, 1999  4:51:41 pm"
To: gmarco@giovannelli.it (Gianmarco Giovannelli)
Date: Wed, 12 May 1999 20:43:45 +0200 (CEST)
Cc: current@FreeBSD.ORG
X-Organisation: Private FreeBSD site - Arnhem, The Netherlands
X-pgp-info: PGP public key at 'finger wilko@freefall.freebsd.org'
X-Mailer: ELM [version 2.4ME+ PL43 (25)]
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-current@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.ORG

As Gianmarco Giovannelli wrote ...
> 
> In 4.0-current sometimes the box will froze again after the :
> "Waiting 3 seconds for SCSI devices to settle"
> then nothing happens.
> It was a thing happened also in early 1999, before the branch in
> 4.0-current and 3.1 stable, if I remember well.
> 
> Any others experience such behaviour ?
> Here is again (part of) my infos: 
> 
> FreeBSD 4.0-CURRENT #0: Wed May 12 13:03:16 CEST 1999
>     root@gmarco.eclipse.org:/usr/src/sys/compile/GMARCO
> Timecounter "i8254"  frequency 1193182 Hz
> Timecounter "TSC"  frequency 400911064 Hz
> CPU: Pentium II/Xeon/Celeron (400.91-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x651  Stepping=1
> Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
> PAT,PSE36,MMX,FXSR>
> real memory  = 134217728 (131072K bytes)
> avail memory = 127868928 (124872K bytes)
> Preloaded elf kernel "kernel" at 0xc02ae000.
> Pentium Pro MTRR support enabled, default memory type is uncacheable
> Probing for PnP devices:
> pcib0: <PCI host bus adapter> on motherboard
> pci0: <PCI bus> on pcib0
> chip0: <Intel 82443BX host to PCI bridge> at device 0.0 on pci0
> pcib1: <PCI to PCI bridge (vendor=8086 device=7191)> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> vga-pci0: <VGA-compatible display device> irq 11 at device 0.0 on pci1
> isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
> chip1: <Intel PIIX4 IDE controller> at device 4.1 on pci0
> chip2: <Intel 82371AB Power management controller> at device 4.3 on pci0
> ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> irq 14 at device 6.0 on pci0
> ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
> [...]
> Waiting 3 seconds for SCSI devices to settle
> sa0 at ahc0 bus 0 target 6 lun 0
> sa0: <TANDBERG TDC 3500 =01:> Removable Sequential Access SCSI-2 device 
> sa0: 3.300MB/s transfers
> changing root device to da0s1a
> da2 at ahc0 bus 0 target 2 lun 0
> da2: <IOMEGA ZIP 100 E.08> Removable Direct Access SCSI-2 device 

Have you tried this without the ZIP drive? I've heared from people they
sometimes cause grief.

Groeten / Cheers,

|   / o / /  _  	 Arnhem, The Netherlands	- Powered by FreeBSD -
|/|/ / / /( (_) Bulte 	 WWW  : http://www.tcja.nl 	http://www.freebsd.org


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message