Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 20 May 2011 14:29:00 +0100
From:      Anton Shterenlikht <mexas@bristol.ac.uk>
To:        Marius Strobl <marius@alchemy.franken.de>
Cc:        freebsd-sparc64@freebsd.org
Subject:   Re: panic on r219425
Message-ID:  <20110520132900.GA14069@mech-cluster241.men.bris.ac.uk>
In-Reply-To: <20110520104224.GA40529@alchemy.franken.de>
References:  <20110519162553.GA88158@mech-cluster241.men.bris.ac.uk> <2147A9F8-B80F-4A33-9D7F-ACE8DFFF3747@xcllnt.net> <20110520104224.GA40529@alchemy.franken.de>

next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, May 20, 2011 at 12:42:24PM +0200, Marius Strobl wrote:
> On Thu, May 19, 2011 at 10:10:22AM -0700, Marcel Moolenaar wrote:
> > 
> > On May 19, 2011, at 9:25 AM, Anton Shterenlikht wrote:
> > 
> > > I found my blade 1500 silver r219425 in debugger
> > > today after Uptime: 69d2h22m8s
> > > 
> > > db> bt
> > > Tracing pid 10 tid 100002 td 0xfffff80002059980
> > > uart_intr() at uart_intr+0x1b4
> > > intr_event_handle() at intr_event_handle+0x64
> > > intr_execute_handlers() at intr_execute_handlers+0x8
> > > intr_fast() at intr_fast+0x68
> > > -- interrupt level=0xc pil=0 %o7=0xc0268610 --
> > > sched_idletd() at sched_idletd+0x8c
> > > fork_exit() at fork_exit+0x9c
> > > fork_trampoline() at fork_trampoline+0x8
> > > db> show thread
> > > Thread 100002 at 0xfffff80002059980:
> > > proc (pid 10): 0xfffff80002053a70
> > > name: idle
> > > stack: 0xe2e12000-0xe2e19fff
> > > flags: 0x50024  pflags: 0x200000
> > > state: RUNNING (CPU 0)
> > > priority: 255
> > > container lock: sched lock (0xc05e5bc0)
> > > db>
> > 
> > Normally when you go from the uart interrupt handler to the
> > debugger, you have a break condition on the serial line or
> 
> Which also can result from replugging the cable ...
> 
> Marius

ok, thanks

Anton

-- 
Anton Shterenlikht
Room 2.6, Queen's Building
Mech Eng Dept
Bristol University
University Walk, Bristol BS8 1TR, UK
Tel: +44 (0)117 331 5944
Fax: +44 (0)117 929 4423



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20110520132900.GA14069>