Date: Thu, 29 Mar 2001 12:25:32 +0100 From: "ict technician" <ict@cardinalnewman.coventry.sch.uk> To: <freebsd-stable@freebsd.org> Subject: Re: ahc - Invalidating pack Message-ID: <00f301c0b842$f898f520$fe00a8c0@cardinalnewman>
next in thread | raw e-mail | index | archive | help
Is this related?
Mar 26 13:00:36 mail /kernel: (da1:ahc0:0:2:0): SCB 0x67 - timed out in
Message-in phase, SEQADDR == 0x117
Mar 26 13:00:36 mail /kernel: STACK == 0xe1, 0x61, 0x161, 0x0
Mar 26 13:00:36 mail /kernel: SXFRCTL0 == 0x80
Mar 26 13:00:36 mail /kernel: ahc0: Dumping Card State at SEQADDR 0x117
Mar 26 13:00:36 mail /kernel: SCSISEQ = 0x12, SBLKCTL = 0xa, SSTAT0 0x0
Mar 26 13:00:36 mail /kernel: SCB count = 180
Mar 26 13:00:36 mail /kernel: Kernel NEXTQSCB = 12
Mar 26 13:00:36 mail /kernel: Card NEXTQSCB = 161
Mar 26 13:00:36 mail /kernel: QINFIFO entries: 161 80 57 138 81 58 32 108 53
35 100 54 168 162 96 8 48 82 75 70 30 78 45 28 74 90 117 13 18 144 115 73 33
119 31 176 123 147 17 88 77 43 149 122 63 27 146 14 111 20 159 44 118 87 40
179 2 175 22 135 91 116 92 1 79 110 36 51 153 24 102 15 65
Mar 26 13:00:36 mail /kernel: Waiting Queue entries:
Mar 26 13:00:36 mail /kernel: Disconnected Queue entries: 18:62
Mar 26 13:00:36 mail /kernel: QOUTFIFO entries:
Mar 26 13:00:36 mail /kernel: Sequencer Free SCB List: 8 12 9 0 10 14 3 27
16 22 25 24 31 7 29 19 17 15 26 5 11 1 4 13 30 28 23 2 6 20
Mar 26 13:00:36 mail /kernel: Pending list: 65 15 102 24 153 51 36 110 79 1
92 116 91 135 22 175 2 179 40 87 118 44 159 20 111 14 146 27 63 122 149 43
77 88 17 147 123 176 31 119 33 73 115 144 18 13 117 90 74 28 45 78 30 70 75
82 48 8 96 162 168 54 100 35 53 108 32 58 81 138 57 80 161 62 103
Mar 26 13:00:36 mail /kernel: Kernel Free SCB list: 141 152 128 109 69 23
143 95 39 104 7 71 68 66 11 107 3 94 99 131 127 155 114 9 145 164 130 154
148 37 134 160 85 97 157 38 112 34 137 29 21 139 67 166 167 140 26 16 124
106 0 46 64 84 142 120 165 10 129 98 25 60 49 61 55 50 19 56 72 76 156 42
169 126 93 163 6 132 47 105 158 125 41 150 178 89 151 83 177 113 136 4 133
86 121 59 101 5 52 174 173 172 171 170
Mar 26 13:00:36 mail /kernel: sg[0] - Addr 0x6121000 : Length 4096
Mar 26 13:00:36 mail /kernel: sg[1] - Addr 0xce62000 : Length 4096
Mar 26 13:00:36 mail /kernel: (da1:ahc0:0:2:0): BDR message in message
buffer
Mar 26 13:00:36 mail /kernel: (da1:ahc0:0:2:0): SCB 0x67 - timed out in
Message-in phase, SEQADDR == 0x116
Mar 26 13:00:36 mail /kernel: STACK == 0xe1, 0x61, 0x161, 0x0
Mar 26 13:00:36 mail /kernel: SXFRCTL0 == 0x80
Mar 26 13:00:36 mail /kernel: ahc0: Dumping Card State at SEQADDR 0x116
Mar 26 13:00:36 mail /kernel: SCSISEQ = 0x12, SBLKCTL = 0xa, SSTAT0 0x0
Mar 26 13:00:36 mail /kernel: SCB count = 180
Mar 26 13:00:36 mail /kernel: Kernel NEXTQSCB = 12
Mar 26 13:00:36 mail /kernel: Card NEXTQSCB = 161
Mar 26 13:00:36 mail /kernel: QINFIFO entries: 161 80 57 138 81 58 32 108 53
35 100 54 168 162 96 8 48 82 75 70 30 78 45 28 74 90 117 13 18 144 115 73 33
119 31 176 123 147 17 88 77 43 149 122 63 27 146 14 111 20 159 44 118 87 40
179 2 175 22 135 91 116 92 1 79 110 36 51 153 24 102 15 65
Mar 26 13:00:36 mail /kernel: Waiting Queue entries:
Mar 26 13:00:36 mail /kernel: Disconnected Queue entries: 18:62
Mar 26 13:00:36 mail /kernel: QOUTFIFO entries:
Mar 26 13:00:36 mail /kernel: Sequencer Free SCB List: 8 12 9 0 10 14 3 27
16 22 25 24 31 7 29 19 17 15 26 5 11 1 4 13 30 28 23 2 6 20
Mar 26 13:00:36 mail /kernel: Pending list: 65 15 102 24 153 51 36 110 79 1
92 116 91 135 22 175 2 179 40 87 118 44 159 20 111 14 146 27 63 122 149 43
77 88 17 147 123 176 31 119 33 73 115 144 18 13 117 90 74 28 45 78 30 70 75
82 48 8 96 162 168 54 100 35 53 108 32 58 81 138 57 80 161 62 103
Mar 26 13:00:36 mail /kernel: Kernel Free SCB list: 141 152 128 109 69 23
143 95 39 104 7 71 68 66 11 107 3 94 99 131 127 155 114 9 145 164 130 154
148 37 134 160 85 97 157 38 112 34 137 29 21 139 67 166 167 140 26 16 124
106 0 46 64 84 142 120 165 10 129 98 25 60 49 61 55 50 19 56 72 76 156 42
169 126 93 163 6 132 47 105 158 125 41 150 178 89 151 83 177 113 136 4 133
86 121 59 101 5 52 174 173 172 171 170
Mar 26 13:00:36 mail /kernel: sg[0] - Addr 0x6121000 : Length 4096
Mar 26 13:00:36 mail /kernel: sg[1] - Addr 0xce62000 : Length 4096
Mar 26 13:00:36 mail /kernel: (da1:ahc0:0:2:0): no longer in timeout, status
= 34b
Mar 26 13:00:36 mail /kernel: ahc0: Issued Channel A Bus Reset. 75 SCBs
aborted
This is a build from Mar 12th, after the update of sendmail but (I thought)
before the ahc changes. The drives seem to have the suspect firmware. This
is a production server so I've been waiting for the dust to settle on the
ahc problem before updating. I guess this forces my hand. The drives are
vinum striped with softupdates if that matters. This is the first such
error.
Have the ahc problems been resolved/proved bogus?
Where exactly do I get the firmware update? The IBM site is rather tortuous.
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-BETA #0: Fri Mar 16 15:41:31 GMT 2001
ict@dumpster.cardinalnewman:/usr/obj/usr/src/sys/MAIL
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (501.14-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 268435456 (262144K bytes)
avail memory = 257679360 (251640K bytes)
Preloaded elf kernel "kernel" at 0xc0342000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc034209c.
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib2
pci1: <S3 Trio3D/2X graphics accelerator> at 0.0
isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586 ATA33 controller> port 0xd000-0xd00f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 7.2
on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ahc0: <Adaptec 29160N Ultra160 SCSI adapter> port 0xd800-0xd8ff mem
0xd9400000-0xd9400fff irq 10 at device 8.0 on pci0
aic7892: Wide Channel A, SCSI Id=7, 32/255 SCBs
rl0: <RealTek 8139 10/100BaseTX> port 0xdc00-0xdcff mem
0xd9401000-0xd94010ff irq 5 at device 10.0 on pci0
rl0: Ethernet address: 00:4f:4e:07:21:82
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: <RealTek 8139 10/100BaseTX> port 0xe000-0xe0ff mem
0xd9402000-0xd94020ff irq 3 at device 11.0 on pci0
rl1: Ethernet address: 00:4f:4e:07:21:71
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IP packet filtering initialized, divert enabled, rule-based forwarding
enabled, default to deny, logging limited to 100 packets/entry by default
acd0: CDROM <ATAPI 48X CDROM> at ata0-master using PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DDYS-T18350N S80D> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da0: 17501MB (35843670 512 byte sectors: 64H 32S/T 17501C)
da1 at ahc0 bus 0 target 2 lun 0
da1: <IBM DDYS-T18350N S80D> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da1: 17501MB (35843670 512 byte sectors: 64H 32S/T 17501C)
cd0 at ahc0 bus 0 target 6 lun 0
cd0: <SONY CD-RW CRX140S 1.0e> Removable CD-ROM SCSI-4 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
--
i j hart
ICT Technician
Cardinal Newman Catholic School & Community College
ict@cardinalnewman.coventry.sch.uk
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?00f301c0b842$f898f520$fe00a8c0>