Date: Sat, 24 Jun 2000 12:51:59 +0100 (BST) From: Paul Branston <apbran@rannoch.demon.co.uk> To: freebsd-isdn@freebsd.org Subject: Not connecting Message-ID: <Pine.LNX.4.21.0006241243450.4595-100000@rannoch.demon.co.uk>
next in thread | raw e-mail | index | archive | help
This is my first posting to this list and I'm a newbie
with FreeBSD although I've run solaris boxes for a
living for many years and used Linux at home for since
1994.
I have FreeBSD 4.0 with a Fritz PCI card, I compiled
a new kernel with ISDN support and the card is
recognised at boot time and the devices configured.
When I try to connect to my ISP (demon) I see the following
in dmesg and get no connection. Can anyone suggest what I have
missed please ?
i4b-L1-timer3_expired: state = F5 Identifying Input
i4b-L1-isic_recover: HSCX B: ISTA = 0x0
i4b-L1-isic_recover: ISAC: ISTA = 0x0
i4b-L1-isic_recover: HSCX B: IMASK = 0x0
i4b-L1-isic_recover: HSCX A: IMASK = 0x0
i4b-L1-isic_recover: ISAC: IMASK = 0x2a
i4b-L2-i4b_T202_timeout: unit 0, N202 = 3
i4b-L1-ph_data_req: still in state F3!
i4b-L3-T303_timeout: SETUP not answered, cr = 43
i4b-L3-next_l3state: FSM illegal state, state = ST_OW - Out Wait EST,
event = EV_T303EXP - T303 timeout!
i4b-L1-timer3_expired: state = F5 Identifying Input
i4b-L1-isic_recover: HSCX B: ISTA = 0x0
i4b-L1-isic_recover: ISAC: ISTA = 0x0
i4b-L1-isic_recover: HSCX B: IMASK = 0x0
i4b-L1-isic_recover: HSCX A: IMASK = 0x0
i4b-L1-isic_recover: ISAC: IMASK = 0x2a
i4b: unit 0, assigned TEI = 74 = 0x4a
i4b: unit 0, assigned TEI = 74 = 0x4a
i4b: unit 0, assigned TEI = 74 = 0x4a
The output from isdntrace implies that it has dialed as does running isdnd
in debugging mode.
---------------------------- isdntrace ------------------------------
Q931: pd=Q.931/I.451, cr=0x40 (from origination), message=SETUP:
[sending complete]
[bearer capability:
cap=unrestricted digital information
std=CCITT
rate=64 kbit/s
mode=circuit]
[channel id: channel=any channel (preferred)]
[calling party number: 01226396208 (type=unknown, plan=ISDN)]
[called party number: 08450798667 (type=unknown, plan=ISDN)]
-- NT->TE - unit:0 - frame:000087 - time:24.06 12:33:06.528902 - length:4
------
Dump:000 00 95 01 02 ....
Q921: SAP=0 (Call Control), R, TEI=74, S-Frame: RR N(R) 1 PF 0
-- NT->TE - unit:0 - frame:000088 - time:24.06 12:33:06.928907 - length:11
-----
Dump:000 02 95 00 02 ....
Q921: SAP=0 (Call Control), C, TEI=74, I-Frame: N(S) 0 N(R) 1 P 0
Dump:004 08 01 c0 02 18 01 89 .......
--------------------------------------------------------------------------
------------------------------ isdnd -d0xf9 -F --------------------------
isdnd[32099]: DBG msg_dialout: dial req from isp, unit 0
isdnd[32099]: DBG setup_dialout: entry I4BIP ok!
isdnd[32099]: DBG find_by_device_for_dialout: found entry 0!
isdnd[32099]: DBG FSM event [msg-dialout]: [idle => dialing]
isdnd[32099]: DBG F_DIAL: local dial out request
isdnd[32099]: DBG select_first_dialno: only one no, no = 08450798667
isdnd[32099]: CHD 00004 I4BIP rate 296 sec/unit (rate)
isdnd[32099]: CHD 00004 I4BIP dialing out from 01226396208 to 08450798667
isdnd[32099]: CHD 00004 I4BIP outgoing call proceeding (ctl 0, ch 0)
isdnd[32099]: DBG msg_charging: 1 unit(s) (estimated)
isdnd[32099]: CHD 00004 I4BIP outgoing call active (ctl 0, ch 0, isp0)
isdnd[32099]: DBG FSM event [msg-con-act-ind]: [dialing => connected]
isdnd[32099]: DBG F_DOK: dial out ok
isdnd[32099]: DBG select_this_dialno: index = 0, no = 08450798667
isdnd[32099]: DBG msg_charging: 2 unit(s) (estimated)
isdnd[32099]: DBG msg_charging: 3 unit(s) (estimated)
isdnd[32099]: CHD 00004 I4BIP outgoing call disconnected (remote)
isdnd[32099]: CHD 00004 I4BIP cause 16: Normal call clearing (Q.850)
isdnd[32099]: CHD 00004 I4BIP charging: 3 units, 601 seconds
isdnd[32099]: CHD 00004 I4BIP accounting: in 621625, out 414423 (in
620977, out
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.21.0006241243450.4595-100000>