Date: Wed, 5 Sep 2001 16:00:01 -0400 (EDT) From: Bernardo Lam <blam@atgnet.com> To: Warner Losh <imp@harmony.village.org> Cc: freebsd-stable@FreeBSD.ORG Subject: Re: 4.3-20010903-STABLE can't install on SONY Laptop Message-ID: <Pine.BSF.4.21.0109051555360.28526-100000@atg2.atgnet.com> In-Reply-To: <200109051947.f85JlZh47282@harmony.village.org>
next in thread | previous in thread | raw e-mail | index | archive | help
It is able to go past the Kernel Configuration menu, and I *believe* it
reboots right after probing the ata0 (it goes very fast and can't tell for
sure).
If it helps, this is the dmesg.boot from the 4.3-20010813 that is
installed on that machine's hard drive:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-20010813-STABLE #0: Mon Sep 3 19:04:02 EDT 2001
root@xx.xxx.xxx:/usr/src/sys/compile/xxp
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (quarter-micron) (197.98-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x581 Stepping = 1
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 100663296 (98304K bytes)
avail memory = 94433280 (92220K bytes)
Preloaded elf kernel "kernel" at 0xc0365000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcd0-0xfcdf at device 1.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfce0-0xfcff at device 1.2 on pci0
uhci0: Invalid irq 255
uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS
device_probe_and_attach: uhci0 attach returned 6
chip1: <Intel 82371AB Power management controller> port 0x2180-0x218f at device 1.3 on pci0
pci0: <NeoMagic MagicGraph 128XD SVGA controller> at 2.0 irq 11
pcic-pci0: <TI PCI-1131 PCI-CardBus Bridge> at device 10.0 on pci0
pcic-pci0: TI113X PCI Config Reg: [clkrun irq 10][ring enable][speaker enable][CSC serial isa irq]
pcic-pci1: <TI PCI-1131 PCI-CardBus Bridge> at device 10.1 on pci0
pcic-pci1: TI113X PCI Config Reg: [clkrun irq 10][ring enable][speaker enable][CSC serial isa irq]
pcib1: <Intel 82380FB mobile PCI to PCI bridge> at device 16.0 on pci0
pci1: <PCI bus> on pcib1
atapci1: <CMD 646 ATA controller> port 0xecf0-0xecff,0x344-0x347,0x160-0x167,0x354-0x357,0x1e8-0x1ef irq 11 at device 4.0 on pci1
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <Intel i82365SL-DF> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus (classic)> on pcic0
pccard1: <PC Card bus (classic)> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging
ad0: 6194MB <TOSHIBA MK6409MAV> [13424/15/63] at ata0-master UDMA33
acd0: CDROM <CD-ROM CDR_U112> at ata1-master using PIO3
Mounting root from ufs:/dev/ad0s1a
pccard: card inserted, slot 0
pccard: card inserted, slot 1
Thanks,
Bernardo
On Wed, 5 Sep 2001, Warner Losh wrote:
> In message <Pine.BSF.4.21.0109051544460.28526-100000@atg2.atgnet.com> Bernardo Lam writes:
> : Sorry, didn't work, same problem. I used today's floppy images from
> : 4.4-RC3.
>
> Where does it spontaneously reboot then?
>
> Warner
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0109051555360.28526-100000>