Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 19 Mar 1999 16:35:48 -0800
From:      Julian Elischer <julian@whistle.com>
To:        hawkkuan@tw.ibm.com
Cc:        hackers@freebsd.org
Subject:   Re: !! Emergency !! FreeBSD 3.1 on IBM Netfinity 5000 Server
Message-ID:  <36F2ED64.6201DD56@whistle.com>
References:  <48256739.00658833.00@tw.ibm.com>

next in thread | previous in thread | raw e-mail | index | archive | help
hawkkuan@tw.ibm.com wrote:
> 
> Dear Freebsd core team and developers,

The first thing you should do is send the contents of the 'dmesg'
command, after booting with -v.
It should be sent to -hackers.. there was some problem in your mail
message so that I could not see what group you sent it to, so I have
CC'd it to hackers.

(often -questions would be correct but I agree that it is more
appropriate in THIS case for -hackers)

julian


> 
>      Recenlty IBM Taiwan had a large project to prompt FreeBSD in Taiwan
> elementary
> school. We use 600 sets IBM Netfinity 5000 server in this project.
> 
>      We had some problems with IBM Netfinity 5000 with FreeBSD, The most
> important
> is that there is 2 set of PCI bridge of Netfinity 5000. When I installed
> the netfinity 5000 and
> use "dmesg" command. System can regonized all chip set on mainboard,
> include 2 PCI bridge
> chip set and 1 PCI-ISA bridge.
> 
> ==== IBM Netfinity 5000 Bus Architecture ====
> 
>      PCI bus 0 connected with on board AIC-7895, S3  Video chip & AMD
> 79cXXX NIC and
> only "1" free PCI slot.
> 
>      PCI bus 1 connected with 4 PCI slots , 2 of them are PCI/ISA share
> slot.
> 
> ====== The most problems we meet  ======
> 
>      All adaptor (we try Intel Ether express pro) only can be regonized on
> PCI bus 0 , but
> no matter what we have tried, we can't install any adaptor on PCI bus 1
> slots!!
> 
>      Could you help us!! We really wonna prompt FreeBSD on Taiwan market.
> It need all
> your help for this!!
> 
>      Is there anyone tried install FreeBSD on multi PCI bus system(most
> mid-high end PC
> server desgined not just for 1 PCI bridge but more than 2 or 3 PCI bridge)?
> 
> Please help us!!
> 
> Best Regards,
> 
> Hawk Kuan ©x®¶µØ
> Sales Specialist , PSG,  IBM Taiwan, 206, Sec.1 Keelung Rd, Taipei, Taiwan,
> R.O.C.
> Tel:886-2-2725-9522, Pager:0959-316961, Mobile: 0936-945920
> Notes ID: Hawk JH Kuan/Taiwan/IBM ,   E-Mail: hawkkuan@tw.ibm.com


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?36F2ED64.6201DD56>