From owner-freebsd-questions Fri May 28 14:50:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from emma.eng.uct.ac.za (emma.eng.uct.ac.za [137.158.128.160]) by hub.freebsd.org (Postfix) with ESMTP id DD24E15323 for ; Fri, 28 May 1999 14:50:02 -0700 (PDT) (envelope-from shaun@emma.eng.uct.ac.za) Received: (from shaun@localhost) by emma.eng.uct.ac.za (8.9.3/8.9.2) id XAA53053; Fri, 28 May 1999 23:49:59 +0200 (SAST) (envelope-from shaun) Date: Fri, 28 May 1999 23:49:59 +0200 From: Shaun Courtney To: questions@freebsd.org Cc: laurief@eng.uct.ac.za Subject: user ppp, leased line, getty on server Message-ID: <19990528234959.A53008@emma.eng.uct.ac.za> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.1i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi We are trying to connect two leased line analog modems using user ppp. (2-wire modems.) Running on -stable as of last week. We know the modems work, because they have been previously set up between another ISP and us (us being the client) and it worked. All we need do was run "ppp -dedicated -alias" and it ran... The modems connect (deskport p 28.8) and using "cu -l /dev/cuaa1 -s 38400" and "cu -l /dev/cuaA02 -s 38400" on the server, characters on the server appear in the clients window. The question is what do we have to do on the server to get it to work, i.e. run ppp on the line? I have tried to set up getty on the port: from /etc/ttys cuaA02 "/usr/libexec/getty std.38400" dialup on insecure Killed init kill -1 1 and getty runs but never runs /usr/local/sbin/ppplogin. This has been set up using Method 2 in the ppp man page. I've left out the chap and pap auth. since the line is leased point-to-point. I've tried mgetty, but this hogs the line and the modem never reconnect :( I've tried setting "set openmode passive" and then running ppp -dedicated SHAUN and no luck. The client ppp.log lists...: May 28 22:48:16 emma ppp[1380]: tun0: Command: CS: set dial May 28 22:48:16 emma ppp[1380]: tun0: Command: CS: set line /dev/cuaa1 May 28 22:48:16 emma ppp[1380]: tun0: Command: CS: set sp 19200 May 28 22:48:16 emma ppp[1380]: tun0: Command: CS: set timeout 900 May 28 22:48:16 emma ppp[1380]: tun0: Command: CS: set log Phase Chat LQM May 28 22:48:16 emma ppp[1381]: Phase: PPP Started (dedicated mode). May 28 22:48:16 emma ppp[1381]: Phase: bundle: Establish May 28 22:48:16 emma ppp[1381]: Phase: deflink: closed -> opening May 28 22:48:16 emma ppp[1381]: Phase: deflink: Connected! May 28 22:48:16 emma ppp[1381]: Phase: deflink: opening -> lcp May 28 22:48:32 emma ppp[1381]: Phase: deflink: Disconnected! May 28 22:48:36 emma ppp[1381]: Phase: deflink: Carrier lost May 28 22:48:36 emma ppp[1381]: Phase: deflink: Disconnected! May 28 22:48:36 emma ppp[1381]: Phase: deflink: Disconnected! May 28 22:48:37 emma ppp[1381]: Phase: deflink: /dev/cuaa1 doesn't support CD May 28 22:48:52 emma ppp[1381]: Phase: deflink: Disconnected! May 28 22:48:53 emma ppp[1381]: Phase: deflink: /dev/cuaa1 doesn't support CD Here is a clip from the client side (ppp -dedicated CS) CS: set dial "" set line /dev/cuaa1 set sp 38400 set timeout 900 set log Phase Chat LQM #set login "TIMEOUT 5 ogin:--ogin: ppp word: ppp HELLO" set ifaddr 192.168.16.2 192.168.16.1 enable lqr accept lqr -- This is the snippet from ppp.conf on the server. SHAUN: set device /dev/cuaA02 set openmode active enable proxyall accept dns set dns x.x.x.x #(real ip #) set ifaddr 192.168.16.1 192.168.16.2 set timeout 0 set lqrperiod 10 set log Phase LQM enable lqr accept lqr and /usr/local/bin/ppplogin is: #!/bin/sh exec /usr/sbin/ppp -direct SHAUN The server is already set up to handle dialin ppp connections on 192.168.1.x and this works fine. What do we need to do to get this right? Any pointers would be helpful. Regards Shaun & Laurie -- Faculty of Engineering and the Built Environment To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message