Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 22 Dec 2009 20:26:55 +0000
From:      Anton Shterenlikht <mexas@bristol.ac.uk>
To:        Warren Block <wblock@wonkity.com>
Cc:        freebsd-questions@freebsd.org, freebsd-sparc64@freebsd.org
Subject:   SOLVED: Re: Signal over range, WAS: X -configure fails: Number of created screens does not match number of detected devices. Configuration failed.
Message-ID:  <20091222202655.GA62431@mech-cluster241.men.bris.ac.uk>
In-Reply-To: <alpine.BSF.2.00.0912221204290.41771@wonkity.com>
References:  <20091219182004.GA80336@mech-cluster241.men.bris.ac.uk> <20091219200730.GW74529@alchemy.franken.de> <20091219214803.GA10306@mech-cluster241.men.bris.ac.uk> <20091220150005.GA74529@alchemy.franken.de> <20091220221010.GA18788@mech-cluster241.men.bris.ac.uk> <20091220222012.GB74529@alchemy.franken.de> <20091222121533.GA60398@mech-cluster241.men.bris.ac.uk> <alpine.BSF.2.00.0912221049100.41771@wonkity.com> <20091222184207.GA61999@mech-cluster241.men.bris.ac.uk> <alpine.BSF.2.00.0912221204290.41771@wonkity.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Dec 22, 2009 at 12:26:03PM -0700, Warren Block wrote:
> On Tue, 22 Dec 2009, Anton Shterenlikht wrote:
> > Warren, thank you, but this doesn't help. I've added:
> >
> > Section "Monitor"
> > 	Identifier   "Monitor0"
> > 	HorizSync	30-50
> > 	VertRefresh	60
> > EndSection
> >
> > Section "Device"
> > 	Identifier  "Card0"
> > 	Driver      "mach64"
> > 	BusID       "PCI:0:2:0"
> > EndSection
> 
> Hmm.  Some web searching says non-Intel platforms might need a different 
> reference clock:
> 
> http://www.gentoo.org/doc/en/gentoo-sparc-faq.xml#doc_chap4_sect1

out of desperation was re-reading the manual and saw this:

	Starting with Xorg 7.4 and above, this test produces
	a black screen which may make it difficult to diagnose
	whether X11 is working properly. The older behavior
	is still available by using the retro option:

	# Xorg -config xorg.conf.new -retro

so, yes, I got the grey screen and a cross, and the mouse
seems to be working.

Warren, many thanks for your help!

-- 
Anton Shterenlikht
Room 2.6, Queen's Building
Mech Eng Dept
Bristol University
University Walk, Bristol BS8 1TR, UK
Tel: +44 (0)117 331 5944
Fax: +44 (0)117 929 4423



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20091222202655.GA62431>