Date: Tue, 6 Jun 1995 08:26:20 -0400 (EDT) From: Paul Weber <weber@zombie.ee.cornell.edu> To: FreeBSD-Questions@freebsd.org Subject: HELP!! Slip server setup with a 8 port BOCA BOARD. Message-ID: <Pine.SUN.3.91.950606075559.4188A-100000@zombie.ee.cornell.edu>
next in thread | raw e-mail | index | archive | help
We would like to setup our 486 FreeBSD computer as a SLIP server running
BSD 2.0 and a 8 port BOCA board! I have worked on this project for three
days now without success. I'm sending you as much of our configuration
as I can so I hope you can help!
When th computer boots it sees the BOCA card and gives this message on
the console:
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
VGA color <4 virtual consoles>
sio4 at 0x100-0x107 flags 0xb05 on isa
sio4: type 8250
sio5 at 0x108-0x10f flags 0xb05 on isa
sio5: type 8250
sio6 at 0x110-0x117 flags 0xb05 on isa
sio6: type 8250
sio7 at 0x118-0x11f flags 0xb05 on isa
sio7: type 8250
sio8 at 0x120-0x127 flags 0xb05 on isa
sio8: type 8250
sio9 at 0x128-0x12f flags 0xb05 on isa
sio9: type 8250
sio10 at 0x130-0x137 flags 0xb05 on isa
sio10: type 8250
sio11 at 0x138-0x13f irq 12 flags 0xb05
sio11: type 8250
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <ST31220A>
wd0: 1033MB (2115792 total sec), 2099, 16 he
ad, 63 sec, bytes/sec 512
<3C507 R1> ethernet address 00:60:8c:11:23:aa
npx0 on motherboard
rumpole lpd[71]: restarted
rumpole getty: /dev/ttyd11: No such file or directory
rumpole getty: /dev/ttyd10: No such file or directory
Please note that 2.0 will not let me MAKEDEV for ttyd10 or ttyd11!
My gettytab file looks like this:
# it is by no means certain, or even likely, that any of them are optimal
# for any purpose whatever. Nor is it likely that more than a couple are
# even correct.
#
# The default gettytab entry, used to set defaults for all other
# entries, and in cases where getty is called with no table name
#
# cb, ce and ck are desirable on most crt's. The non-crt entries need to
# be changed to turn them off (cb@:ce@:ck@:).
#
# Parity defaults to even. There ought to be more alternative entries with
# no parity. The Pc entry already has no parity.. The different parities
# are:
# (none): same as even except -inpck instead of inpck for login.
# ep: getty will use raw mode (cs8 -parenb) (unless rw is set) and
# fake parity. login will use even parity (cs7 parenb
-parodd).
# op: same as ep except odd parity (cs7 parenb parodd) for login.
# op overrides ep.
# ap: same as ep except -inpck instead of inpck for login.
# ap overrides op and ep.
# np: 1. don't fake parity in getty. The fake parity garbles
# characters on non-terminals (like pccons) that don't
# support parity. It would probably better for getty not to
# try to fake parity. It could just use cbreak mode so as
# as not to force cs8 and let the hardware handle the
parity.
# login has to be rely on the hardware anyway.
# 2. set PASS8, giving cs8 -parenb -istrip -inpck.
# np:ep: same as np except inpck.
# np:op: same as np:ep except for parodd (but parodd is overridden).
# np:ap: same as np except istrip.
#
default:\
:cb:ce:ck:fd#1000:im=\r\n FreeBSD (%h) (%t)\r\n\r\n:sp#1200:
#
# Fixed speed entries
#
# The "std.NNN" names are known to the special case
# portselector code in getty, however they can
# be assigned to any table desired.
# The "NNN-baud" names are known to the special case
# autobaud code in getty, and likewise can
# be assigned to any table desired (hopefully the same speed).
#
a|std.110|110-baud:\
:np:nd#1:cd#1:uc:sp#110:
b|std.134|134.5-baud:\
:np:nd#1:cd#2:ff#1:td#1:sp#134:ht:nl:
1|std.150|150-baud:\
:np:nd#1:cd#2:td#1:fd#1:sp#150:ht:nl:lm=\E\72\6\6\17login\72 :
c|std.300|300-baud:\
:np:nd#1:cd#1:sp#300:
d|std.600|600-baud:\
:np:nd#1:cd#1:sp#600:
f|std.1200|1200-baud:\
:np:fd#1:sp#1200:
6|std.2400|2400-baud:\
:np:sp#2400:
7|std.4800|4800-baud:\
:np:sp#4800:
2|std.9600|9600-baud:\
std.38400|38400-baud:\
:np:sp#38400:
std.57600|57600-baud:\
:np:sp#57600:
std.115200|115200-baud:\
:np:sp#115200:
#
#MI9200 Modem lines,fixed speed (no rotary)
#
M19200|Modem-19200:\
:tc=19200-baud:
M9600|Modem-9600:\
:tc=9600-baud:
m|M2400|Modem-2400:\
:tc=2400-baud:
n|M1200|Modem-1200:\
tc=1200-baud:
o|M300|Modem-300:\
:tc=300-baud:
#
# Dial in rotary tables, speed selection via 'break'
#
0|d300|Dial-300:\
:nx=d1200:cd#2:sp#300:
d1200|Dial-1200:\
:nx=d150:fd#1:sp#1200:
d150|Dial-150:\
:nx=d110:lm@:tc=150-baud:
d110|Dial-110:\
:nx=d300:tc=300-baud:
#
# Fast dialup terminals, 2400/1200/300 rotary (can start either way)
#
D2400|d2400|Fast-Dial-2400:\
:nx=D1200:tc=2400-baud:
3|D1200|Fast-Dial-1200:\
:nx=D300:tc=1200-baud:
5|D300|Fast-Dial-300:\
:nx=D2400:tc=300-baud:
#
#telebit (19200)
#
t19200:\
:nx=t2400:tc=19200-baud:
t2400:\
:nx=t1200:tc=2400-baud:
t1200:\
:nx=t19200:tc=1200-baud:
#
#telebit (9600)
#
t9600:\
:nx=t2400a:tc=9600-baud:
t2400a:\
:nx=t1200a:tc=2400-baud:
t1200a:\
:nx=t9600:tc=1200-baud:
#
# Odd special case terminals
#
-|tty33|asr33|Pity the poor user of this beast:\
:tc=110-baud:
4|Console|Console Decwriter II:\
:nd@:cd@:rw:tc=300-baud:
e|Console-1200|Console Decwriter III:\
:fd@:nd@:cd@:rw:tc=1200-baud:
i|Interdata console:\
:uc:sp#0:
l|lsi chess terminal:\
:sp#300:
X|Xwindow|X window system:\
:fd@:nd@:cd@:rw:sp#9600:
P|Pc|Pc console:\
:ht:np:sp#115200:
#
# Wierdo special case for fast crt's with hardcopy devices
#
8|T9600|CRT with hardcopy:\
:nx=T300:tc=9600-baud:
9|T300|CRT with hardcopy (300):\
:nx=T9600:tc=300-baud:
#
# Plugboard, and misc other terminals
#
plug-9600|Plugboard-9600:\
:pf#1:tc=9600-baud:
p|P9600|Plugboard-9600-rotary:\
:pf#1:nx=P300:tc=9600-baud:
q|P300|Plugboard-300:\
:pf#1:nx=P1200:tc=300-baud:
r|P1200|Plugboard-1200:\
:pf#1:nx=P9600:tc=1200-baud:
#
# XXXX Port selector
#
s|DSW|Port Selector:\
:ps:sp#2400:
#
# Auto-baud speed detect entry for Micom 600.
# Special code in getty will switch this out
# to one of the NNN-baud entries.
#
A|Auto-baud:\
:ab:sp#2400:f0#040:
The ttys file looks like this:
#
# @(#)ttys 5.1 (Berkeley) 4/17/89
#
# name getty type status comments
#
# This entry needed for asking password when init goes to single-user mode
# If you want to be asked for password, change "secure" to "insecure" here
console none unknown off secure
#
ttyv0 "/usr/libexec/getty Pc" cons25 on secure
# Virtual terminals
ttyv1 "/usr/libexec/getty Pc" cons25 on secure
ttyv2 "/usr/libexec/getty Pc" cons25 on secure
ttyv3 "/usr/libexec/getty Pc" cons25 off secure
# Hardwired terminals
tty00 "/usr/libexec/getty std.9600" unknown off secure
tty01 "/usr/libexec/getty std.9600" unknown off secure
# Dialin terminals
ttyd4 "/usr/libexec/getty M19200" dialup on secure
ttyd5 "/usr/libexec/getty M19200" dialup on secure
ttyd6 "/usr/libexec/getty M19200" dialup on secure
ttyd7 "/usr/libexec/getty M19200" dialup on secure
ttyd8 "/usr/libexec/getty M19200" dialup on secure
ttyd9 "/usr/libexec/getty M19200" dialup on secure
ttyd10 "/usr/libexec/getty M19200" dialup on secure
ttyd11 "/usr/libexec/getty M19200" dialup on secure
# Pseudo terminals
ttyp0 none network
ttyp1 none network
ttyp2 none network
ttyp3 none network
ttyp4 none network
ttyp5 none network
ttyp6 none network
ttyp7 none network
ttyp8 none network
ttyp9 none network
ttypa none network
ttypb none network
ttypc none network
ttypd none network
ttype none network
ttypf none network
ttyq0 none network
ttyq1 none network
ttyq2 none network
ttyq3 none network
ttyq4 none network
ttyq5 none network
ttyq6 none network
ttyq7 none network
ttyq8 none network
ttyq9 none network
ttyqa none network
ttyqb none network
ttyqc none network
ttyqd none network
ttyqe none network
ttyqf none network
When we try to dial in the phone rings but the computer will not answer,
also the DRT ligth does not come on! Sorry for the over kill on the
information. but if anyone can help I sure would appreciate it!! Also
why won't the computer let me MAKEDEV for ttyd10 and ttyd11. One last bit
of information the modems we use are ZOOM V32bits 14400's. They work
well on a DEC VAX running BSD 4.3
Thanks!
Paul R. Weber
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~ Paul R. Weber ~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~ Computer Operations Manager II ~
~ 301 Phillips Hall ~
~ Electrical Engineering ~
~ Cornell University ~
~ Ithaca, NY 14853-6401 ~
~ ~
~ E-mail: prw1@cornell.edu ~
~ Phone: (607) 255-1460 ~
~ Fax: (607) 254-4565 ~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.SUN.3.91.950606075559.4188A-100000>