Date: Mon, 8 May 2000 20:22:19 +0100 From: Mark Ovens <mark@ukug.uk.freebsd.org> To: stable@freebsd.org Subject: New error appearing at boot-time Message-ID: <20000508202219.E233@parish>
next in thread | raw e-mail | index | archive | help
Since making the world and a new kernel with 4-STABLE sources cvsup'd
6/5/00 13:55 BST I am getting a warning/error during the device probes
at boot:
isa0: too many dependant configs (8)
I've checked back through /var/log/messages and it definitely didn't
appear until the first time I booted with the new kernel. It appears
to be harmless as everything is working fine, but what does it mean?
The previous make world was on 18/3 with sources cvsup'd the same day.
# uname -a
FreeBSD parish 4.0-STABLE FreeBSD 4.0-STABLE #0: Sat May 6 20:06:03 BST 2000 root@parish:/usr/src/sys/compile/PARISH i386
My kernel config file and dmesg output are below
# dmesg
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-STABLE #0: Sat May 6 20:06:03 BST 2000
root@parish:/usr/src/sys/compile/PARISH
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 233864438 Hz
CPU: AMD-K6tm w/ multimedia extensions (233.86-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x562 Stepping = 2
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
AMD Features=0x400<<b10>>
real memory = 67108864 (65536K bytes)
avail memory = 61976576 (60524K bytes)
Preloaded elf kernel "kernel" at 0xc0320000.
Preloaded elf module "vesa.ko" at 0xc032009c.
VESA: v2.0, 4096k memory, flags:0x0, mode table:0xc031d102 (1000022)
VESA: ATI MACH64
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Intel PIIX4 ATA controller> at 7.1
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0x5f00-0x5f0f at device 7.3 on pci0
pci0: <ATI Mach64-GP graphics accelerator> at 8.0
sym0: <875> port 0x6600-0x66ff mem 0xe1002000-0xe1002fff,0xe1001000-0xe10010ff irq 10 at device 9.0 on pci0
sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: SCAN AT BOOT disabled for targets 1 2 3 4 5 9 10 11 12 13 14 15.
xl0: <3Com 3c900-COMBO Etherlink XL> port 0x6700-0x673f irq 9 at device 10.0 on pci0
xl0: Ethernet address: 00:60:08:73:4e:e0
xl0: selecting 10baseT transceiver, half duplex
pcm0: <AudioPCI ES1371> port 0x6800-0x683f irq 11 at device 11.0 on pci0
isa0: too many dependant configs (8)
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 610C> MLC,PCL,PML
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio2: <Pace 56 Voice Internal Plug & Play Modem> at port 0x3e8-0x3ef irq 5 on isa0
sio2: type 16550A
Waiting 10 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
Mounting root from ufs:/dev/da0s3a
cd0 at sym0 bus 0 target 6 lun 0
cd0: <TOSHIBA CD-ROM XM-6201TA 1030> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 16)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at sym0 bus 0 target 0 lun 0
da0: <IBM DCAS-34330W S65A> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
da0: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
da1 at sym0 bus 0 target 8 lun 0
da1: <IBM DDRS-34560W S97B> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da1: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.freebsd.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.245 2000/02/27 07:35:42 green Exp $
machine i386
cpu I586_CPU
ident PARISH
maxusers 32
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, NFS required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=10000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extentions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options INCLUDE_CONFIG_FILE # Include this file in kernel
# Size of the kernel message buffer. Should be N * pagesize.
options MSGBUF_SIZE=40960
# Soft updates is technique for improving file system speed and
# making abrupt shutdown less risky. It is not enabled by default due
# to copyright restraints on the code that implement it.
#
# Read ../../ufs/ffs/README.softupdates to learn what you need to
# do to enable this. ../../contrib/softupdates/README gives
# more details on how they actually work.
#
options SOFTUPDATES
options USER_LDT #allow user-level control of i386 ldt
device isa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
# SCSI Controllers
device sym # NCR/Symbios Logic (newer chipsets)
# SCSI peripherals
device scbus # SCSI bus (required)
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa?
options SC_HISTORY_SIZE=1000 # number of history buffer lines
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
# MII bus support is required for some PCI 10/100 ethernet NICs,
# namely those which use MII-compliant transceivers or implement
# tranceiver control interfaces that operate like an MII. Adding
# "device miibus0" to the kernel config pulls in support for
# the generic miibus API and all of the PHY drivers, including a
# generic one for PHYs that aren't specifically handled by an
# individual driver.
device miibus
# PCI Ethernet NICs that use the common MII bus controller code.
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# Pseudo devices - the number indicates how many units to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif 4 # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# For PnP/PCI sound cards
device pcm
--
...and on the eighth day God created UNIX
________________________________________________________________
FreeBSD - The Power To Serve http://www.freebsd.org
My Webpage http://ukug.uk.freebsd.org/~mark/
mailto:mark@ukug.uk.freebsd.org http://www.radan.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000508202219.E233>