From owner-freebsd-questions Wed Feb 4 01:37:39 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id BAA20273 for questions-outgoing; Wed, 4 Feb 1998 01:37:39 -0800 (PST) (envelope-from owner-freebsd-questions@FreeBSD.ORG) Received: from milan.obs-besancon.fr (milan.obs-besancon.fr [193.52.184.42]) by hub.freebsd.org (8.8.8/8.8.8) with SMTP id BAA20264 for ; Wed, 4 Feb 1998 01:37:30 -0800 (PST) (envelope-from annie@milan.obs-besancon.fr) Received: by milan.obs-besancon.fr; id AA15790; Wed, 4 Feb 1998 10:40:24 +0100 Date: Wed, 4 Feb 1998 10:40:24 +0100 Message-Id: <9802040940.AA15790@milan.obs-besancon.fr> To: freebsd-questions@FreeBSD.ORG X-Url: http://www.freebsd.org/mailto.html X-Mailer: Lynx, Version 2.7 X-Personal_Name: Annie Robin From: robin@obs-besancon.fr Subject: pccardd for pcmcia scsi card Adaptec APA-1460 SCSI Cc: robin@obs-besancon.fr Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG X-To-Unsubscribe: mail to majordomo@FreeBSD.org "unsubscribe questions" Hi, I encounter problems in configuring my machine with a pcmcia scsi adpater. The card is referenced in the supported card but it does not seem to work. My machine is an Olivetti ECHOS P90S. The card is "APA-1460 SCSI Host Adapter" and is recognized by pccardd at the boot but then I get the following message : Feb 4 10:25:08 annie pccardd[34]: driver allocation failed for Adaptec, Inc. (Device not configured) I have tried different config index port adress and irq's but with no result. Contrarily to what is mentionned in the supported cards and pccard.conf by default my card (as shown by pccardc dumpcis) should have an IRQ 4 or 5 (pccard.conf says IRQ 10). If it helps this is the pccard dumpcis messages : Configuration data for card in slot 1 Tuple #1, code = 0x1 (Common memory descriptor), length = 3 000: 00 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = 512b, 1 units Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3 000: 12 00 ff Attribute memory device information: Device number 1, type Mask ROM, WPS = OFF Speed = 200nS, Memory block size = 512b, 1 units Tuple #3, code = 0x15 (Version 1 info), length = 57 000: 04 01 41 64 61 70 74 65 63 2c 20 49 6e 63 2e 00 010: 41 50 41 2d 31 34 36 30 20 53 43 53 49 20 48 6f 020: 73 74 20 41 64 61 70 74 65 72 00 56 65 72 73 69 030: 6f 6e 20 30 2e 30 31 00 ff Version = 4.1, Manuf = [Adaptec, Inc.],card vers = [APA-1460 SCSI Host Adapter] Addit. info = [Version 0.01],[] Tuple #4, code = 0x20 (Manufacturer ID), length = 4 000: 2f 01 02 00 PCMCIA ID = 0x12f, OEM ID = 0x2 Tuple #5, code = 0x1a (Configuration map), length = 5 000: 01 08 00 20 01 Reg len = 2, config register addr = 0x2000, last config = 0x8 Registers: X------- Tuple #6, code = 0x1b (Configuration entry), length = 15 000: c9 01 19 49 55 65 06 ca 60 40 03 1f 30 00 1e Config index = 0x9(default) Interface byte = 0x1 (I/O) Vcc pwr: Nominal operating supply voltage: 5 x 1V Continuous supply current: 6 x 10mA Power down supply current: 1 x 100mA Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x340 block length = 0x20 IRQ modes: Level IRQs: 4 5 Tuple #7, code = 0x1b (Configuration entry), length = 7 000: 08 08 ca 60 40 01 1f Config index = 0x8 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x140 block length = 0x20 Tuple #8, code = 0x14 (No link), length = 0 Tuple #9, code = 0xff (Terminator), length = 0 Thanks for your help Annie Robin