Date: Fri, 10 Nov 2000 14:01:05 +0000 (GMT) From: ben@pavilion.net To: FreeBSD-gnats-submit@freebsd.org Subject: ports/22739: sawfish refuses to build from ports. Message-ID: <20001110140105.4101258@lament.support.pavilion.net>
next in thread | raw e-mail | index | archive | help
>Number: 22739
>Category: ports
>Synopsis: sawfish refuses to build from ports.
>Confidential: no
>Severity: non-critical
>Priority: medium
>Responsible: freebsd-ports
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Fri Nov 10 06:10:01 PST 2000
>Closed-Date:
>Last-Modified:
>Originator: ben@pavilion.net
>Release: FreeBSD 4.1.1-STABLE i386
>Organization:
Pavilion Internet PLC.
>Environment:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1.1-STABLE #0: Mon Oct 30 13:24:01 GMT 2000
root@lament.support.pavilion.net:/usr/obj/usr/src/sys/LAMENT
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (534.55-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134217728 (131072K bytes)
config> pnp 1 0 os enable irq0 10 port0 0x220 drq0 1 drq1 3
Invalid command or syntax. Type `?' for help.
avail memory = 127447040 (124460K bytes)
Preloaded elf kernel "kernel" at 0xc0327000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc032709c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GW graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 10
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
rl0: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xe8100000-0xe81000ff irq 11 at device 9.0 on pci0
rl0: Ethernet address: 00:e0:7d:84:6f:70
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xe800-0xe81f mem 0xe8000000-0xe80fffff,0xe8101000-0xe8101fff irq 5 at device 10.0 on pci0
fxp0: Ethernet address 00:90:27:1c:94:bb
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sbc0: <Creative ViBRA16X> at port 0x220-0x22f,0x300-0x301,0x388-0x38b irq 7 drq 0,1 on isa0
pcm0: <SB DSP 4.16 (ViBRA16X)> on sbc0
IP Filter: v3.4.8 initialized. Default = pass all, Logging = enabled
ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
ad0: 9773MB <FUJITSU MPF3102AT> [19857/16/63] at ata0-master UDMA33
acd0: CDROM <ATAPI 52X CDROM> at ata0-slave using PIO4
Mounting root from ufs:/dev/ad0s2a
cvsup'd last night.
>Description:
lament:/usr/ports/x11-wm/sawfish# make
===> Configuring for sawfish-gnome-0.33
loading cache ./config.cache
checking host system type... i386--freebsd4.1.1
checking for gcc... cc
checking whether the C compiler (cc -O -pipe ) works... yes
checking whether the C compiler (cc -O -pipe ) is a cross-compiler... no
checking whether we are using GNU C... yes
checking whether cc accepts -g... yes
checking how to run the C preprocessor... cc -E
checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
checking whether ln -s works... yes
checking whether gmake sets ${MAKE}... yes
checking whether cc needs -traditional... no
checking for xdr_void in -lnsl... no
checking for bind in -lsocket... no
checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include
checking for dnet_ntoa in -ldnet... no
checking for dnet_ntoa in -ldnet_stub... no
checking for gethostbyname... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking for ANSI C header files... yes
checking whether time.h and sys/time.h may both be included... yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking for fcntl.h... yes
checking for sys/time.h... yes
checking for sys/utsname.h... yes
checking for unistd.h... yes
checking for memory.h... yes
checking for X11/SM/SMlib.h... yes
checking for X11/extensions/Xdbe.h... yes
checking for XineramaQueryScreens in -lXinerama... yes
checking for X11/extensions/Xinerama.h... yes
checking for rep - version >= 0.13... version 0.13.1
checking for GNU msgfmt... /usr/local/bin/msgfmt
checking for correct rep-gtk version... no
configure: error: You need rep-gtk version 0.14+
===> Script "configure" failed: here are the contents of "config.log"
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
configure:632: checking host system type
configure:667: checking for gcc
configure:780: checking whether the C compiler (cc -O -pipe ) works
configure:796: cc -o conftest -O -pipe -I/usr/local/include -I/usr/X11R6/include conftest.c -L/usr/local/lib 1>&5
configure:822: checking whether the C compiler (cc -O -pipe ) is a cross-compiler
configure:827: checking whether we are using GNU C
configure:836: cc -E conftest.c
configure:855: checking whether cc accepts -g
configure:887: checking how to run the C preprocessor
configure:908: cc -E -I/usr/local/include -I/usr/X11R6/include conftest.c >/dev/null 2>conftest.out
configure:978: checking for a BSD compatible install
configure:1031: checking whether ln -s works
configure:1052: checking whether gmake sets ${MAKE}
configure:1080: checking whether cc needs -traditional
configure:1105: termio.h: No such file or directory
configure:1131: checking for xdr_void in -lnsl
configure:1150: cc -o conftest -O -pipe -I/usr/local/include -I/usr/X11R6/include conftest.c -lnsl -L/usr/local/lib 1>&5
/usr/libexec/elf/ld: cannot find -lnsl
configure: failed program was:
#line 1139 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char xdr_void();
int main() {
xdr_void()
; return 0; }
configure:1178: checking for bind in -lsocket
configure:1197: cc -o conftest -O -pipe -I/usr/local/include -I/usr/X11R6/include conftest.c -lsocket -L/usr/local/lib 1>&5
/usr/libexec/elf/ld: cannot find -lsocket
configure: failed program was:
#line 1186 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char bind();
int main() {
bind()
; return 0; }
configure:1230: checking for X
configure:1544: checking for dnet_ntoa in -ldnet
configure:1563: cc -o conftest -O -pipe -I/usr/local/include -I/usr/X11R6/include conftest.c -ldnet -L/usr/local/lib 1>&5
/usr/libexec/elf/ld: cannot find -ldnet
configure: failed program was:
#line 1552 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char dnet_ntoa();
int main() {
dnet_ntoa()
; return 0; }
configure:1585: checking for dnet_ntoa in -ldnet_stub
configure:1604: cc -o conftest -O -pipe -I/usr/local/include -I/usr/X11R6/include conftest.c -ldnet_stub -L/usr/local/lib 1>&5
/usr/libexec/elf/ld: cannot find -ldnet_stub
configure: failed program was:
#line 1593 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char dnet_ntoa();
int main() {
dnet_ntoa()
; return 0; }
configure:1633: checking for gethostbyname
configure:1661: cc -o conftest -O -pipe -I/usr/local/include -I/usr/X11R6/include conftest.c -L/usr/local/lib 1>&5
configure:1731: checking for connect
configure:1759: cc -o conftest -O -pipe -I/usr/local/include -I/usr/X11R6/include conftest.c -L/usr/local/lib 1>&5
configure:1823: checking for remove
configure:1851: cc -o conftest -O -pipe -I/usr/local/include -I/usr/X11R6/include conftest.c -L/usr/local/lib 1>&5
configure:1915: checking for shmat
configure:1943: cc -o conftest -O -pipe -I/usr/local/include -I/usr/X11R6/include conftest.c -L/usr/local/lib 1>&5
configure:2016: checking for IceConnectionNumber in -lICE
configure:2035: cc -o conftest -O -pipe -I/usr/local/include -I/usr/X11R6/include -L/usr/X11R6/lib conftest.c -lICE -L/usr/local/lib 1>&5
configure:2060: checking for ANSI C header files
configure:2073: cc -E -I/usr/local/include -I/usr/X11R6/include conftest.c >/dev/null 2>conftest.out
configure:2140: cc -o conftest -O -pipe -I/usr/local/include -I/usr/X11R6/include conftest.c -L/usr/local/lib 1>&5
configure:2164: checking whether time.h and sys/time.h may both be included
configure:2178: cc -c -O -pipe -I/usr/local/include -I/usr/X11R6/include conftest.c 1>&5
configure:2199: checking for sys/wait.h that is POSIX.1 compatible
configure:2220: cc -c -O -pipe -I/usr/local/include -I/usr/X11R6/include conftest.c 1>&5
configure:2244: checking for fcntl.h
configure:2254: cc -E -I/usr/local/include -I/usr/X11R6/include conftest.c >/dev/null 2>conftest.out
configure:2244: checking for sys/time.h
configure:2254: cc -E -I/usr/local/include -I/usr/X11R6/include conftest.c >/dev/null 2>conftest.out
configure:2244: checking for sys/utsname.h
configure:2254: cc -E -I/usr/local/include -I/usr/X11R6/include conftest.c >/dev/null 2>conftest.out
configure:2244: checking for unistd.h
configure:2254: cc -E -I/usr/local/include -I/usr/X11R6/include conftest.c >/dev/null 2>conftest.out
configure:2244: checking for memory.h
configure:2254: cc -E -I/usr/local/include -I/usr/X11R6/include conftest.c >/dev/null 2>conftest.out
configure:2244: checking for X11/SM/SMlib.h
configure:2254: cc -E -I/usr/local/include -I/usr/X11R6/include conftest.c >/dev/null 2>conftest.out
configure:2244: checking for X11/extensions/Xdbe.h
configure:2254: cc -E -I/usr/local/include -I/usr/X11R6/include conftest.c >/dev/null 2>conftest.out
configure:2284: checking for XineramaQueryScreens in -lXinerama
configure:2303: cc -o conftest -O -pipe -I/usr/local/include -I/usr/X11R6/include conftest.c -lXinerama -L/usr/X11R6/lib -lX11 -lXext -L/usr/local/lib 1>&5
configure:2323: checking for X11/extensions/Xinerama.h
configure:2333: cc -E -I/usr/local/include -I/usr/X11R6/include conftest.c >/dev/null 2>conftest.out
configure:2379: checking for rep - version >= 0.13
configure:2411: checking for GNU msgfmt
configure:2433: checking for correct rep-gtk version
(end of "config.log")
*** Error code 1
Stop in /usr/ports/x11-wm/sawfish.
*** Error code 1
Stop in /usr/ports/x11-wm/sawfish.
*** Error code 1
Stop in /usr/ports/x11-wm/sawfish.
*** Error code 1
Stop in /usr/ports/x11-wm/sawfish.
lament:/usr/ports/x11-wm/sawfish# exit
lament:~$ pkg_info | grep rep | grep Lisp
librep-0.13.2 An Emacs Lisp like runtime library
rep-gtk-0.14_1 GTK+ binding for rep Lisp interpreter
rep-gtk-gnome-0.14_1 GTK+ binding for rep Lisp interpreter
>How-To-Repeat:
lament:~# cd /usr/ports/x11-wm/sawfish && make
>Fix:
lament:~# pkg_add -r sawfish
Notes: a number of other people i have spoke to have the same (or similar)
problem.
Also Josef Karthauser made me send the PR (:
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-ports" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001110140105.4101258>