Date: Thu, 20 Sep 2001 02:47:23 +0900 From: yoichi@eken.phys.nagoya-u.ac.jp To: Warner Losh <imp@harmony.village.org> Cc: stable@FreeBSD.ORG, mobile@FreeBSD.ORG Subject: Re: 4.4-STABLE: reboot stops after "Uptime ..." Message-ID: <wyelp3gjis.wl@eken3.eken.phys.nagoya-u.ac.jp> In-Reply-To: <200109191549.f8JFn5703628@harmony.village.org> References: <wy3d5js72k.wl@eken7.eken.phys.nagoya-u.ac.jp> <Pine.BSF.4.10.10109191000220.7676-400000@raven.itep.ru> <200109191549.f8JFn5703628@harmony.village.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--Multipart_Thu_Sep_20_02:47:23_2001-1
Content-Type: text/plain; charset=US-ASCII
>>> Warner Losh wrote:
> : For my case (Sony PCG-505V/CBX), if I remove pccard before rebooting,
> : then my machine reboot by shutdown -r.
> It sounds like the chip is interrupting with nothing to service the
> interrupt. I thought that I'd turned off all interrupt sources.
> Does your dmesg also show an attempt to use irq 0?
I have following in /boot/loader.conf with warner's advice.
hw.pcic.intr_path=1
hw.pcic.irq=0
# Today I get another information in bsd-nomads mailing list
# that I should put following on rc.shutdown
#
# /usr/sbin/pccardc power 0 0
#
# it also works (correctly reboot as well as I removed card before
# rebooting).
Following is dmesg:
--Multipart_Thu_Sep_20_02:47:23_2001-1
Content-Type: application/octet-stream
Content-Disposition: attachment; filename="dmesg"
Content-Transfer-Encoding: 7bit
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RC #2: Mon Sep 10 15:44:22 JST 2001
yoichi@e-ppp4.eken.phys.nagoya-u.ac.jp:/usr/src/obj/usr/src/sys/ALBATROS
Calibrating clock(s) ... TSC clock: 298385430 Hz, i8254 clock: 1193040 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium/P55C (quarter-micron) (298.42-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x582 Stepping = 2
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67043328 (65472K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00509000 - 0x03fe7fff, 61730816 bytes (15071 pages)
avail memory = 60276736 (58864K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f6d60
bios32: Entry = 0xfd7f0 (c00fd7f0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x214
pnpbios: Found PnP BIOS data at 0xc00f6d90
pnpbios: Entry = f0000:ba79 Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
ACPI: 000f6d20
Preloaded elf kernel "kernel.new" at 0xc04e3000.
Intel Pentium detected, installing workaround for F00F bug
netsmb_dev: loaded
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71008086)
Using $PIR table, 4 entries at 0xc00fdf80
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 174216027 bytes/sec
bzero() bandwidth = 719942404 bytes/sec
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7100, revid=0x01
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7110, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000fcd0, size 4
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=9
map[20]: type 1, range 32, base 0000fce0, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 1, range 32, base 00002180, size 4
found-> vendor=0x10c8, dev=0x0004, revid=0x01
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base fd000000, size 24
map[14]: type 1, range 32, base fea00000, size 21
map[18]: type 1, range 32, base fed00000, size 20
found-> vendor=0x104d, dev=0x8009, revid=0x01
class=0c-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base fecffc00, size 9
found-> vendor=0x1180, dev=0x0475, revid=0x00
class=06-07-00, hdrtype=0x02, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=255
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcd0-0xfcdf at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcd0
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=00 b=00
ata0-slave: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcd8
ata1: mask=03 status0=00 status1=00
ata1: mask=03 ostat0=00 ostat2=00
ata1-master: ATAPI probe a=00 b=00
ata1-slave: ATAPI probe a=00 b=00
ata1: mask=03 status0=00 status1=00
ata1: devices=00
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfce0-0xfcff irq 9 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> port 0x2180-0x218f irq 9 at device 7.3 on pci0
intpm0: I/O mapped 2180
intpm0: intr IRQ 9 enabled revision 0
using shared irq9.
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped 8000
pci0: <NeoMagic MagicGraph 128XD SVGA controller> (vendor=0x10c8, dev=0x0004) at 8.0 irq 9
chip1: <Sony CXD1847A FireWire Host Controller> mem 0xfecffc00-0xfecffdff irq 9 at device 9.0 on pci0
pcic0: <Ricoh RL5C475 PCI-CardBus Bridge> at device 10.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pcic0: Polling mode
pccard0: <PC Card bus (classic)> on pcic0
ex_isa_identify()
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
pcic-: pcic0 exists, using next available unit number
pcic-: pcic1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 19 devices, largest 317 bytes
PNP0c02: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding io range 0x72-0x73, size=0x2, align=0x1
PNP0c02: adding io range 0x370-0x371, size=0x2, align=0x1
PNP0c02: adding io range 0xb2-0xb3, size=0x2, align=0x1
PNP0c02: adding io range 0x8000-0x804f, size=0x50, align=0x1
PNP0c02: adding io range 0x2180-0x218f, size=0x10, align=0x1
PNP0c02: adding io range 0x230-0x233, size=0x4, align=0x1
PNP0c02: end config
pnpbios: handle 0 device ID PNP0c02 (020cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xe8000-0xfffff, size=0x18000
PNP0c01: adding fixed memory32 range 0x100000-0x3ffffff, size=0x3f00000
PNP0c01: end config
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
PNP0200: end config
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 00x4
PNP0000: end config
pnpbios: handle 3 device ID PNP0000 (0000d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 00x1
PNP0100: end config
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
PNP0b00: end config
pnpbios: handle 5 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 00x2
PNP0303: end config
pnpbios: handle 6 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
PNP0c04: end config
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
PNP0800: end config
pnpbios: handle 8 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0a03: end config
pnpbios: handle 9 device ID PNP0a03 (030ad041)
ESS1879: adding dma mask 0x2
ESS1879: adding dma mask 0x20
ESS1879: adding irq mask 0x20
ESS1879: adding io range 0x220-0x22f, size=0x10, align=0x20
ESS1879: adding io range 0x388-0x38b, size=0x4, align=0x4
ESS1879: adding io range 0x320-0x321, size=0x2, align=0x10
ESS1879: end config
pnpbios: handle 10 device ID ESS1879 (79187316)
PNP0e03: adding io range 0-0xffffffff, size=0, align=0
PNP0e03: end config
pnpbios: handle 11 device ID PNP0e03 (030ed041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: end config
pnpbios: handle 12 device ID PNP0700 (0007d041)
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x1
PNP0401: adding io range 0x778-0x77f, size=0x8, align=0x1
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
PNP0401: end config
pnpbios: handle 15 device ID PNP0401 (0104d041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
PNP0501: adding irq mask 0x10
PNP0501: end config
pnpbios: handle 16 device ID PNP0501 (0105d041)
SMCf010: adding io range 0x3e8-0x3ef, size=0x8, align=0x1
SMCf010: adding irq mask 0x400
SMCf010: adding io range 0x140-0x147, size=0x8, align=0x8
SMCf010: adding dma mask 0x1
SMCf010: end config
pnpbios: handle 19 device ID SMCf010 (10f0a34d)
ROK0010: adding io range 0x2f8-0x2ff, size=0x8, align=0x1
ROK0010: adding irq mask 00x8
ROK0010: end config
pnpbios: handle 20 device ID ROK0010 (1000eb49)
PNP0f13: adding irq mask 0x1000
PNP0f13: end config
pnpbios: handle 21 device ID PNP0f13 (130fd041)
ESS0009: adding io range 0x800-0x807, size=0x8, align=0x8
ESS0009: end config
pnpbios: handle 23 device ID ESS0009 (09007316)
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
adv0 failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model VersaPad, device ID 0-00, 2 buttons
psm0: config:00006000, flags:00000000, packet size:6
psm0: syncmask:e8, syncbits:c8
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic1 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic2: not probed (disabled)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
pca0 at port 0x40 on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0c02> can't assign resources
unknown: <PNP0c02> at port 0x4d0-0x4d1,0x80,0x72-0x73,0x370-0x371,0xb2-0xb3,0x8000-0x804f,0x2180-0x218f iomem 0xfffe0000-0xffffffff on isa0
unknown: <PNP0c01> failed to probe at iomem 0-0x9ffff,0xe8000-0xfffff,0x100000-0x3ffffff on isa0
adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0200> failed to probe at port 0-0xf,0x81-0x8f,0xc0-0xdf drq 4 on isa0
unknown: <PNP0000> can't assign resources
unknown: <PNP0000> at port 0x20-0x21,0xa0-0xa1 irq 2 on isa0
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0100> failed to probe at port 0x40-0x4f irq 0 on isa0
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0b00> failed to probe at port 0x70-0x7f irq 8 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0c04> failed to probe at port 0xf0-0xff irq 13 on isa0
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe.
pca1: <AT-style speaker sound> at port 0x61 on isa0
adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330. Failing probe.
unknown: <PNP0a03> failed to probe at port 0xcf8-0xd07 on isa0
sbc0: <ESS ES1879> at port 0x220-0x22f,0x388-0x38b,0x320-0x321 irq 5 drq 1,5 on isa0
pcm0: <ESS 18xx DSP> on sbc0
pcm0: ESS1879 detected, newspeed
pcm: setmap 4000, 1000; 0xc5927000 -> 4000
pcm: setmap 5000, 1000; 0xc5928000 -> 5000
adv1: Invalid baseport of 0x10 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0e03> failed to probe at port 0x10-0x1f on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0401> can't assign resources
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
adv1: Invalid baseport of 0x3e8 specified. Nearest valid baseport is 0x330. Failing probe.
unknown: <SMCf010> failed to probe at port 0x3e8-0x3ef,0x140-0x147 irq 10 drq 0 on isa0
unknown: <ROK0010> can't assign resources
unknown: <ROK0010> at port 0x2f8-0x2ff on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0f13> at irq 12 on isa0
adv1: Invalid baseport of 0x800 specified. Nearest valid baseport is 0x330. Failing probe.
unknown: <ESS0009> failed to probe at port 0x800-0x80f on isa0
BIOS Geometries:
0:022def3f 0..557=558 cylinders, 0..239=240 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68c240, tty 6310ba, net 6710ba
bpf: sl0 attached
bpf: faith0 attached
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to accept, logging limited to 100 packets/entry by default
ata0-master: success setting UDMA2 on Intel chip
Creating DISK ad0
ad0: <TOSHIBA MK4309MAT/G5.01 H> ATA-4 disk at ata0-master
ad0: 4126MB (8452080 sectors), 8944 cyls, 15 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
ad0: 4126MB <TOSHIBA MK4309MAT> [8944/15/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 1013039, size 1012977 : OK
ad0s2: type 0xa5, start 4309200, end = 8300879, size 3991680 : OK
ad0s3: type 0xa5, start 1013040, end = 4309199, size 3296160 : OK
ad0s4: type 0xa0, start 8300880, end = 8436959, size 136080 : OK
start_init: trying /sbin/init
pccard: card inserted, slot 0
pcic0: reset 1 int is 0 stat is 4f
pcic0: reset 1 int is 0 stat is 4f
pccard: card inserted, slot 0
pcic0: reset 2 int is 60 stat is 4f
pcic0: reset 3 int is 60 stat is 4f
pcic0: reset 0
pccard0: Assigning ed0: io 0x340-0x35f irq 11 mem 0x0-0xffffffff
pcic: I/O win 0 flags 15 340-35f
pcic: I/O win 0 flags 5 340-35f
pcic: I/O win 0 flags 15 340-35f
pcic: I/O win 0 flags 5 340-35f
ed0 at port 0x340-0x35f irq 11 slot 0 on pccard0
pcic: I/O win 0 flags 15 340-35f
bpf: ed0 attached
ed0: address 00:40:26:5b:2d:ce, type NE2000 (16 bit)
Linux-ELF exec handler installed
--Multipart_Thu_Sep_20_02:47:23_2001-1--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?wyelp3gjis.wl>