Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 26 Dec 2004 20:00:10 +0100
From:      Marcin Wisnicki <mwisnicki@gmail.com>
To:        freebsd-current@freebsd.org
Subject:   FreeBSD 5.3 and 6 hangs on panic (in ata_shutdown)
Message-ID:  <1104087611.62361.13.camel@ghost.pnet.one.pl>

next in thread | raw e-mail | index | archive | help

--=-ELE70YifvxOtgdFPgykr
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

After upgrade from 5.2.1 to 5.3 (and 5-STABLE after that), my both
machines would always hang on panic (with and without acpi, dumps, sync
on panic), just after printing uptime.

This problem looks identical to the one described here:
 http://lists.freebsd.org/pipermail/freebsd-current/2004-May/026881.html

I've also reproduced it on most recent 6-CURRENT kernel from
 ftp://snapshots.jp.freebsd.org/pub/FreeBSD/snapshots/i386/livetree/


With ata debugging enabled I got this output:

> Uptime: 1m41s
> eventhandler_invoke("shutdown_post_sync")
> eventhandler_invoke: executing 0xc066dbd0
#                                kproc_shutdown()
> eventhandler_invoke: executing 0xc04d0dc0
#                                ata_shutdown()
> ad0: req=0xc23e8258 FLUSHCACHE queued
> ad0: req=0xc23e8258 FLUSHCACHE starting
> ad0: req=0xc23e8258 FLUSHCACHE begin transaction
> ad0: req=0xc23e8258 FLUSHCACHE wait for completition


And then it locks up. I've tried single stepping from the line after the
last ATA_DEBUG_RQ printf and found this loop:

> Breakpoint at   cv_wait:        pushl   %ebp
> db> tr
> cv_wait(c23e8750,c08a6272,67,c08a694f,c23e8708) at cv_wait
# missing _sema_wait() (at the end of ata_queue_reqeust()) ?
> ata_queue_request(c23e8708,0,101,0,3af0) at ata_queue_request+0x254
> ata_controlcmd(c21608ac,e7,0,0,0) at ata_controlcmd+0x8b
> ata_shutdown(0,104,194,c089d209,c04d0d40) at ata_shutdown+0x7b
> boot(104,0,c08d251c,233,100) at boot+0x727
> panic(c24ae5ad,d57e3bac,0,d57e3bf8,1) at panic+0x138
...

kern/kern_sema.c:_sema_wait():
  95         while (sema->sema_value == 0) {
  96                 sema->sema_waiters++;
->97                 cv_wait(&sema->sema_cv, &sema->sema_mtx);
  98                 sema->sema_waiters--;
  99         }


But because panicstr is set, cv_wait() immediately returns, so
_sema_wait() goes into a tight loop.

kern/kern_condvar.c:cv_wait():
 111         if (cold || panicstr) {
 112                 /*
 113                  * During autoconfiguration, just give interrupts
 114                  * a chance, then just return.  Don't run any other
 115                  * thread or panic below, in case this is the idle
 116                  * process and already asleep.
 117                  */
 118                 return;
 119         }


As a workaround I tried the following change:

-------------------------------------------------------------------
--- src/sys/kern/kern_condvar.c.orig       Tue Nov  9 23:51:16 2004
+++ src/sys/kern/kern_condvar.c    Thu Dec 23 18:04:46 2004
@@ -108,7 +108,7 @@
            "Waiting on \"%s\"", cvp->cv_description);
        WITNESS_SAVE(&mp->mtx_object, mp);

-       if (cold || panicstr) {
+       if (cold) {
                /*
                 * During autoconfiguration, just give interrupts
                 * a chance, then just return.  Don't run any other
-------------------------------------------------------------------

This is what I get now instead of hang:

> ad0: req=0xc23e8708 FLUSHCACHE interrupt
> ad0: req=0xc23e8708 FLUSHCACHE end transaction
> ad0: req=0xc23e8708 FLUSHCACHE finish taskqueue_thread
> ad0: req=0xc23e8708 FLUSHCACHE completed entered
> ad0: req=0xc23e8708 FLUSHCACHE completed callback/wakeup

And it almost works now, normal panics (like "uhci_abort_xfer: not in
process context" that I sometimes get under heavy load or a panic
triggered by sysctl using a simple module) succeed, including crashdumps
(even if panic happened while I was in X).

There is a following problem when I call panic from ddb with this, so I
guess a proper fix is more complicated but I don't know much about
kernel programming.

# sysctl debug.kdb.enter=1
debug.kdb.enter:K D0B: enter: sysctl debug.kdb.enter
[thread 100036]
Stopped at      kdb_enter+0x30: leave
db> panic
panic: from debugger
Uptime: 22s
panic: mi_switch: switch in a critical section
KDB: enter: panic
[thread 100036]
Stopped at      kdb_enter+0x30: leave
db> tr
kdb_enter(c08d24f8,d57dd7b4,d57dd804,c068d3fe,104) at kdb_enter+0x30
panic(c08d2e6c,2,c08d2e04,11d,c08ef77c) at panic+0xcc
mi_switch(1,0,c08d5556,196,127) at mi_switch+0xbc
sleepq_switch(c23e81fc,1,c21a1960,c23e81fc,d57dd8a0) at sleepq_switch
+0x134
sleepq_wait(c23e81fc,c23e81fc,c23e81d8,c08a6261,1) at sleepq_wait+0x41
cv_wait(c23e81fc,c23e81d8,c08d23f9,5e,d57dd8d8) at cv_wait+0x1e7
_sema_wait(c23e81d8,c08a6272,67,5b,c23e8190) at _sema_wait+0x43
ata_queue_request(c23e8190,0,101,0,d920) at ata_queue_request+0x254
ata_controlcmd(c21608ac,e7,0,0,0) at ata_controlcmd+0x8b
ata_shutdown(0,104,194,c089d209,c04d0d40) at ata_shutdown+0x7b
boot(104,0,c08d251c,233,100) at boot+0x727
panic(c089d08e,d57dda88,c046c2d2,c068a090,0) at panic+0x138
db_panic(c068a090,0,ffffffff,d57dd9fc,d57dd9f8) at db_panic+0x12
db_command(c0979124,c0902060,c08f90ec,c08f9108,d57ddaf4) at db_command
+0x2b2
db_command_loop(c068a090,0,0,0,0) at db_command_loop+0x6a
db_trap(3,0,3,d57ddb40,c086457a) at db_trap+0xe5
kdb_trap(3,0,d57ddb48,1,0) at kdb_trap+0x77
trap(18,10,10,0,0) at trap+0x4ea
calltrap() at calltrap+0x5
--- trap 0x3, eip = 0xc068a090, esp = 0xd57ddb88, ebp = 0xd57ddb90 ---
kdb_enter(c08d4b7a,d57ddba8,0,d57ddbf8,1) at kdb_enter+0x30
kdb_sysctl_enter(c0933dc0,0,0,d57ddbf8,d57ddbf8) at kdb_sysctl_enter
+0x67
sysctl_root(0,d57ddc64,3,d57ddbf8,c21a1960) at sysctl_root+0x14e
userland_sysctl(c21a1960,d57ddc64,3,0,0) at userland_sysctl+0x11f
__sysctl(c21a1960,d57ddd14,3d8,c08f38de,c21a1960) at __sysctl+0xaf
syscall(2f,2f,2f,0,0) at syscall+0x2c2
Xint0x80_syscall() at Xint0x80_syscall+0x1f
--- syscall (202, FreeBSD ELF32, __sysctl), eip = 0x280c82ef, esp =
0xbfbfe53c, ebp = 0xbfbfe568 ---db>


Attachments:

DEBUG:
	kernel configuration /usr/src/sys/i386/conf/DEBUG

dmesg-verbose-ghost.txt:
	verbose dmesg from the first machine

dmesg-verbose-wisnia.txt:
	verbose dmesg from the second machine

ktr-hang-wisnia.txt:
        ktr output [ktr.mask=KTR_ALL] from the second machine, with
        DEBUG kernel, without workaround. This is from after
        print_uptime() up to hang


--=-ELE70YifvxOtgdFPgykr
Content-Disposition: attachment; filename=DEBUG
Content-Type: text/plain; name=DEBUG; charset=UTF-8
Content-Transfer-Encoding: 7bit

include		GENERIC
ident		GENERIC_DEBUG

makeoptions	DEBUG=-g

options 	KDB
options 	DDB
options 	GDB

options 	INVARIANTS
options 	INVARIANT_SUPPORT
options 	WITNESS
options 	WITNESS_SKIPSPIN

options		KTR
options 	KTR_COMPILE=(KTR_ALL)
options 	KTR_ENTRIES=131072
options 	KTR_VERBOSE

--=-ELE70YifvxOtgdFPgykr
Content-Disposition: attachment; filename=dmesg-verbose-ghost.txt
Content-Type: text/plain; name=dmesg-verbose-ghost.txt; charset=UTF-8
Content-Transfer-Encoding: 7bit

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #6: Thu Dec 23 18:59:09 CET 2004
    root@ghost.pnet.one.pl:/usr/obj/usr/src/sys/DEBUG
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/gendebug/kernel" at 0xc111c000.
Preloaded elf module "/boot/gendebug/acpi.ko" at 0xc111c27c.
Calibrating clock(s) ... i8254 clock: 1193255 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1000046717 Hz
CPU: AMD Duron(tm) (1000.05-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x670  Stepping = 0
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory  = 528416768 (503 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001426000 - 0x000000001eee3fff, 497803264 bytes (121534 pages)
avail memory = 499052544 (475 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fdac0
bios32: Entry = 0xfdad0 (c00fdad0)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdaf1
pnpbios: Found PnP BIOS data at 0xc00f7790
pnpbios: Entry = f0000:65ab  Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT VIA_K7> on motherboard
acpi0: [MPSAFE]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80008840
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=31161106)
pcibios: BIOS version 2.10
Found $PIR table, 6 entries at 0xc00f7e00
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0    1    A   0x01  3 4 5 6 7 10 11 12 14 15
embedded    0    1    B   0x02  3 4 5 6 7 10 11 12 14 15
embedded    0   17    A   0xfe  14
embedded    0   17    B   0xff  15
embedded    0   17    C   0x03  3 4 5 6 7 10 11 12 14 15
slot 1      0    8    A   0x01  3 4 5 6 7 10 11 12 14 15
slot 1      0    8    B   0x02  3 4 5 6 7 10 11 12 14 15
slot 1      0    8    C   0x03  3 4 5 6 7 10 11 12 14 15
slot 1      0    8    D   0x05  3 4 5 6 7 10 11 12 14 15
slot 2      0    9    A   0x02  3 4 5 6 7 10 11 12 14 15
slot 2      0    9    B   0x03  3 4 5 6 7 10 11 12 14 15
slot 2      0    9    C   0x05  3 4 5 6 7 10 11 12 14 15
slot 2      0    9    D   0x01  3 4 5 6 7 10 11 12 14 15
embedded    0   16    A   0x01  3 4 5 6 7 10 11 12 14 15
embedded    0   16    B   0x02  3 4 5 6 7 10 11 12 14 15
embedded    0   16    C   0x03  3 4 5 6 7 10 11 12 14 15
embedded    0   16    D   0x05  3 4 5 6 7 10 11 12 14 15
embedded    0   18    A   0x01  3 4 5 6 7 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 17 func 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi0: Power Button (fixed)
atpic: Programming IRQ9 as level/low
AcpiOsDerivePciId: bus 0 dev 0 func 0
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\\_SB_.LNKA irq  0: [ 3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.1.0
\\_SB_.LNKB irq  0: [ 3  4  5  6  7 10 11 12 14 15]  6+ low,level,sharable 0.1.1
\\_SB_.LNKC irq  0: [ 3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.17.2
\\_SB_.LNKA irq  0: [ 3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.8.0
\\_SB_.LNKB irq  0: [ 3  4  5  6  7 10 11 12 14 15]  6+ low,level,sharable 0.8.1
\\_SB_.LNKC irq  0: [ 3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.8.2
\\_SB_.LNKD irq  0: [ 3  4  5  6  7 10 11 12 14 15] 10+ low,level,sharable 0.8.3
\\_SB_.LNKB irq  0: [ 3  4  5  6  7 10 11 12 14 15]  6+ low,level,sharable 0.9.0
\\_SB_.LNKC irq  0: [ 3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.9.1
\\_SB_.LNKD irq  0: [ 3  4  5  6  7 10 11 12 14 15] 10+ low,level,sharable 0.9.2
\\_SB_.LNKA irq  0: [ 3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.9.3
\\_SB_.LNKA irq  0: [ 3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.16.0
\\_SB_.LNKB irq  0: [ 3  4  5  6  7 10 11 12 14 15]  6+ low,level,sharable 0.16.1
\\_SB_.LNKC irq  0: [ 3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.16.2
\\_SB_.LNKD irq  0: [ 3  4  5  6  7 10 11 12 14 15] 10+ low,level,sharable 0.16.3
\\_SB_.LNKA irq  0: [ 3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.18.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base e0000000, size 26, enabled
found->	vendor=0x1106, dev=0x3116, revid=0x00
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
	lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x1106, dev=0xb091, revid=0x00
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0xa230, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 0000e400, size  5, enabled
pcib0: matched entry for 0.16.INTA (src \\_SB_.LNKA)
pcib0: possible interrupts:  3  4  5  6  7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.LNKA (references 5, priority 63325):
	interrupts:	    11    10     5    12     7     6     4     3    15    14
	penalty:	   160   160   210  5160  5160  5160  5160  5160 50160 50160
\\_SB_.LNKB (references 4, priority 50660):
	interrupts:	    11    10     5    12     7     6     4     3    15    14
	penalty:	   160   160   210  5160  5160  5160  5160  5160 50160 50160
\\_SB_.LNKC (references 4, priority 50660):
	interrupts:	    11    10     5    12     7     6     4     3    15    14
	penalty:	   160   160   210  5160  5160  5160  5160  5160 50160 50160
\\_SB_.LNKD (references 3, priority 37995):
	interrupts:	    11    10     5    12     7     6     4     3    15    14
	penalty:	   160   160   210  5160  5160  5160  5160  5160 50160 50160
pcib0: slot 16 INTA routed to irq 11 via \\_SB_.LNKA
found->	vendor=0x1106, dev=0x3038, revid=0x80
	bus=0, slot=16, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type 4, range 32, base 0000e800, size  5, enabled
pcib0: matched entry for 0.16.INTB (src \\_SB_.LNKB)
pcib0: possible interrupts:  3  4  5  6  7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.LNKB (references 4, priority 51320):
	interrupts:	    10    11     5    12     7     6     4     3    15    14
	penalty:	   320   370   370  5320  5320  5320  5320  5320 50320 50320
\\_SB_.LNKC (references 4, priority 51320):
	interrupts:	    10    11     5    12     7     6     4     3    15    14
	penalty:	   320   370   370  5320  5320  5320  5320  5320 50320 50320
\\_SB_.LNKD (references 3, priority 38490):
	interrupts:	    10    11     5    12     7     6     4     3    15    14
	penalty:	   320   370   370  5320  5320  5320  5320  5320 50320 50320
pcib0: slot 16 INTB routed to irq 6 via \\_SB_.LNKB
found->	vendor=0x1106, dev=0x3038, revid=0x80
	bus=0, slot=16, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=6
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type 4, range 32, base 0000ec00, size  5, enabled
pcib0: matched entry for 0.16.INTC (src \\_SB_.LNKC)
pcib0: possible interrupts:  3  4  5  6  7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.LNKC (references 4, priority 51976):
	interrupts:	    10    11     5    12     7     4     3     6    15    14
	penalty:	   480   530   530  5480  5480  5480  5480  5520 50480 50480
\\_SB_.LNKD (references 3, priority 38982):
	interrupts:	    10    11     5    12     7     4     3     6    15    14
	penalty:	   480   530   530  5480  5480  5480  5480  5520 50480 50480
pcib0: slot 16 INTC routed to irq 5 via \\_SB_.LNKC
found->	vendor=0x1106, dev=0x3038, revid=0x80
	bus=0, slot=16, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base dfffff00, size  8, enabled
pcib0: matched entry for 0.16.INTD (src \\_SB_.LNKD)
pcib0: possible interrupts:  3  4  5  6  7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.LNKD (references 3, priority 39474):
	interrupts:	    10    11     5    12     7     4     3     6    15    14
	penalty:	   640   690   730  5640  5640  5640  5640  5680 50640 50640
pcib0: slot 16 INTD routed to irq 10 via \\_SB_.LNKD
found->	vendor=0x1106, dev=0x3104, revid=0x82
	bus=0, slot=16, func=3
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=0x1106, dev=0x3177, revid=0x00
	bus=0, slot=17, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000fc00, size  4, enabled
found->	vendor=0x1106, dev=0x0571, revid=0x06
	bus=0, slot=17, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000e000, size  8, enabled
pcib0: matched entry for 0.17.INTC (src \\_SB_.LNKC)
pcib0: slot 17 INTC is already routed to irq 5
found->	vendor=0x1106, dev=0x3059, revid=0x50
	bus=0, slot=17, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000dc00, size  8, enabled
	map[14]: type 1, range 32, base dffffe00, size  8, enabled
pcib0: matched entry for 0.18.INTA (src \\_SB_.LNKA)
pcib0: slot 18 INTA is already routed to irq 11
found->	vendor=0x1106, dev=0x3065, revid=0x74
	bus=0, slot=18, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xdfd00000-0xdfefffff
pcib1:   prefetched decode 0xcfc00000-0xdfbfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 1, range 32, base dfe80000, size 19, enabled
pcib1: device (null) requested decoded memory range 0xdfe80000-0xdfefffff
	map[14]: type 3, range 32, base d0000000, size 27, enabled
pcib1: device (null) requested decoded memory range 0xd0000000-0xd7ffffff
pcib0: matched entry for 0.1.INTA (src \\_SB_.LNKA)
pcib0: slot 1 INTA is already routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
found->	vendor=0x5333, dev=0x8d04, revid=0x00
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0230, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 11 at device 16.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe400
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ulpt0: Hewlett-Packard DeskJet 920C, rev 1.10/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
ugen0: Prolific Technology PL2303 Serial adapter (ATEN/IOGEAR UC232A), rev 1.10/2.02, addr 3
uhci1: <VIA 83C572 USB controller> port 0xe800-0xe81f irq 6 at device 16.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe800
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xec00-0xec1f irq 5 at device 16.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xec00
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=20 ostat1=30
ata1-master: stat=0x20 err=0x20 lsb=0x20 msb=0x20
ata1-slave:  stat=0x30 err=0x30 lsb=0x30 msb=0x30
ata1: reset tp2 stat0=20 stat1=30 devices=0x0
ata1: [MPSAFE]
pci0: <multimedia, audio> at device 17.5 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xdc00-0xdcff mem 0xdffffe00-0xdffffeff irq 11 at device 18.0 on pci0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xdc00
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x004063, model 0x0032, rev. 5
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 42:00:e6:65:9b:11
vr0: [MPSAFE]
acpi_button1: <Sleep Button> on acpi0
unknown: not probed (disabled)
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
fdc0: <floppy drive controller> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3 irq 6 drq 2 on acpi0
atpic: Programming IRQ6 as edge/high
fdc0: does not respond
device_attach: fdc0 attach returned 6
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
fdc0: <floppy drive controller> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xcc000-0xdbfff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1000046717 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0%
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on VIA 8235 chip
ata0-master: setting UDMA100 on VIA 8235 chip
ad0: <WDC WD1200BB-00DAA3/75.13B75> ATA-6 disk at ata0-master
ad0: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
[0] f:00 typ:131 s(CHS):0/1/1 e(CHS):3/254/63 s:63 l:64197
[1] f:00 typ:4 s(CHS):4/0/1 e(CHS):7/254/63 s:64260 l:64260
[2] f:80 typ:165 s(CHS):8/0/1 e(CHS):1023/254/63 s:128520 l:24579450
[3] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:24707970 l:209728575
GEOM: Configure ad0s1, start 32256 length 32868864 end 32901119
GEOM: Configure ad0s2, start 32901120 length 32901120 end 65802239
GEOM: Configure ad0s3, start 65802240 length 12584678400 end 12650480639
GEOM: Configure ad0s4, start 12650480640 length 107381030400 end 120031511039
GEOM: Configure ad0s3a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s3b, start 536870912 length 805306368 end 1342177279
GEOM: Configure ad0s3c, start 0 length 12584678400 end 12584678399
GEOM: Configure ad0s3d, start 268435456 length 268435456 end 536870911
GEOM: Configure ad0s3e, start 1342177280 length 268435456 end 1610612735
GEOM: Configure ad0s3f, start 1610612736 length 536870912 end 2147483647
GEOM: Configure ad0s3g, start 2147483648 length 2147483648 end 4294967295
GEOM: Configure ad0s3h, start 4294967296 length 8289711104 end 12584678399
GEOM: Configure ad0s4c, start 0 length 107381030400 end 107381030399
GEOM: Configure ad0s4d, start 0 length 80530636800 end 80530636799
GEOM: Configure ad0s4e, start 80530636800 length 26850393600 end 107381030399
Mounting root from ufs:/dev/ad0s3a
start_init: trying /sbin/init

--=-ELE70YifvxOtgdFPgykr
Content-Disposition: attachment; filename=dmesg-verbose-wisnia.txt
Content-Type: text/plain; name=dmesg-verbose-wisnia.txt; charset=UTF-8
Content-Transfer-Encoding: 7bit

OK boot -shv
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=00000000000a0000
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000ffff0000 len=0000000000010000
SMAP type=01 base=0000000000100000 len=000000001fef0000
SMAP type=03 base=000000001fff3000 len=000000000000d000
SMAP type=04 base=000000001fff0000 len=0000000000003000
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #6: Thu Dec 23 18:59:09 CET 2004
    root@ghost.pnet.one.pl:/usr/obj/usr/src/sys/DEBUG
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/gendebug/kernel" at 0xc111e000.
Preloaded elf module "/boot/gendebug/acpi.ko" at 0xc111e1e0.
Calibrating clock(s) ... i8254 clock: 1193091 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1750008683 Hz
CPU: AMD Athlon(tm) XP 2100+ (1750.01-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x681  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory  = 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001426000 - 0x000000001f6bffff, 506044416 bytes (123546 pages)
avail memory = 507363328 (483 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fafd0
bios32: Entry = 0xfb440 (c00fb440)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb470
pnpbios: Found PnP BIOS data at 0xc00fbf30
pnpbios: Entry = f0000:bf60  Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VIA694 AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1):    mode 1 addr port (0x0cf8) is 0x80008840
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=30991106)
pcibios: BIOS version 2.10
Found $PIR table, 6 entries at 0xc00fdf10
PCI-Only Interrupts: 5 11 12
Location  Bus Device Pin  Link  IRQs
slot 1      0   10    A   0x02  3 4 5 7 9 10 11 12 14 15
slot 1      0   10    B   0x03  3 4 5 7 9 10 11 12 14 15
slot 1      0   10    C   0x04  3 4 5 7 9 10 11 12 14 15
slot 1      0   10    D   0x01  3 4 5 7 9 10 11 12 14 15
slot 2      0   11    A   0x03  3 4 5 7 9 10 11 12 14 15
slot 2      0   11    B   0x04  3 4 5 7 9 10 11 12 14 15
slot 2      0   11    C   0x01  3 4 5 7 9 10 11 12 14 15
slot 2      0   11    D   0x02  3 4 5 7 9 10 11 12 14 15
slot 3      0   12    A   0x04  3 4 5 7 9 10 11 12 14 15
slot 3      0   12    B   0x01  3 4 5 7 9 10 11 12 14 15
slot 3      0   12    C   0x02  3 4 5 7 9 10 11 12 14 15
slot 3      0   12    D   0x03  3 4 5 7 9 10 11 12 14 15
slot 4      0    9    A   0x01  3 4 5 7 9 10 11 12 14 15
slot 4      0    9    B   0x02  3 4 5 7 9 10 11 12 14 15
slot 4      0    9    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 4      0    9    D   0x04  3 4 5 7 9 10 11 12 14 15
slot 5      0   14    A   0x02  3 4 5 7 9 10 11 12 14 15
slot 5      0   14    B   0x03  3 4 5 7 9 10 11 12 14 15
slot 5      0   14    C   0x04  3 4 5 7 9 10 11 12 14 15
slot 5      0   14    D   0x01  3 4 5 7 9 10 11 12 14 15
embedded    0    1    A   0x01  3 4 5 7 9 10 11 12 14 15
embedded    0    1    B   0x02  3 4 5 7 9 10 11 12 14 15
embedded    0    1    C   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0    1    D   0x04  3 4 5 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi0: Power Button (fixed)
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/2 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 0.10.0
\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+ low,level,sharable 0.10.1
\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.10.2
\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.10.3
\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+ low,level,sharable 0.11.0
\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.11.1
\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.11.2
\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 0.11.3
\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.12.0
\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.12.1
\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 0.12.2
\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+ low,level,sharable 0.12.3
\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.9.0
\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 0.9.1
\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+ low,level,sharable 0.9.2
\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.9.3
\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 0.14.0
\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+ low,level,sharable 0.14.1
\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.14.2
\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.14.3
\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.17.0
\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 0.17.1
\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+ low,level,sharable 0.17.2
\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.17.3
\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.1.0
\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 0.1.1
\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+ low,level,sharable 0.1.2
\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.1.3
\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.18.0
\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 0.18.1
\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+ low,level,sharable 0.18.2
\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.18.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
        map[10]: type 3, range 32, base d0000000, size 27, enabled
found-> vendor=0x1106, dev=0x3099, revid=0x00
        bus=0, slot=0, func=0
        class=06-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
        lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        powerspec 2  supports D0 D3  current D0
found-> vendor=0x1106, dev=0xb099, revid=0x00
        bus=0, slot=1, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
        map[10]: type 4, range 32, base 0000d000, size  8, enabled
        map[14]: type 1, range 32, base ea000000, size  8, enabled
pcib0: matched entry for 0.11.INTA (src \_SB_.PCI0.LNKC)
pcib0: possible interrupts:  1  3  4  5  6  7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\_SB_.PCI0.LNKB (references 8, priority 166232):
        interrupts:         11    10     5    12     7     6     4     3    15    14     1
        penalty:           320   320   370  5320  5320  5320  5320  5320 50320 50320100320
\_SB_.PCI0.LNKC (references 8, priority 166232):
        interrupts:         11    10     5    12     7     6     4     3    15    14     1
        penalty:           320   320   370  5320  5320  5320  5320  5320 50320 50320100320
\_SB_.PCI0.LNKD (references 8, priority 166232):
        interrupts:         11    10     5    12     7     6     4     3    15    14     1
        penalty:           320   320   370  5320  5320  5320  5320  5320 50320 50320100320
\_SB_.PCI0.LNKA (references 8, priority 166232):
        interrupts:         11    10     5    12     7     6     4     3    15    14     1
        penalty:           320   320   370  5320  5320  5320  5320  5320 50320 50320100320
pcib0: slot 11 INTA routed to irq 12 via \_SB_.PCI0.LNKC
found-> vendor=0x10ec, dev=0x8139, revid=0x10
        bus=0, slot=11, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
        intpin=a, irq=12
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type 3, range 32, base ea001000, size 12, enabled
pcib0: matched entry for 0.12.INTA (src \_SB_.PCI0.LNKD)
pcib0: possible interrupts:  1  3  4  5  6  7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\_SB_.PCI0.LNKB (references 8, priority 168850):
        interrupts:         11    10     5     7     6     4     3    12    15    14     1
        penalty:           640   640   690  5640  5640  5640  5640  5720 50640 50640100640
\_SB_.PCI0.LNKD (references 8, priority 168850):
        interrupts:         11    10     5     7     6     4     3    12    15    14     1
        penalty:           640   640   690  5640  5640  5640  5640  5720 50640 50640100640
\_SB_.PCI0.LNKA (references 8, priority 168850):
        interrupts:         11    10     5     7     6     4     3    12    15    14     1
        penalty:           640   640   690  5640  5640  5640  5640  5720 50640 50640100640
pcib0: slot 12 INTA routed to irq 5 via \_SB_.PCI0.LNKD
found-> vendor=0x109e, dev=0x036e, revid=0x11
        bus=0, slot=12, func=0
        class=04-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x28 (10000 ns)
        intpin=a, irq=5
        powerspec 2  supports D0 D3  current D0
        map[10]: type 3, range 32, base ea002000, size 12, enabled
pcib0: matched entry for 0.12.INTA (src \_SB_.PCI0.LNKD)
pcib0: slot 12 INTA is already routed to irq 5
found-> vendor=0x109e, dev=0x0878, revid=0x11
        bus=0, slot=12, func=1
        class=04-80-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns)
        intpin=a, irq=5
        powerspec 2  supports D0 D3  current D0
found-> vendor=0x1106, dev=0x3074, revid=0x00
        bus=0, slot=17, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        powerspec 2  supports D0 D3  current D0
        map[20]: type 4, range 32, base 0000d400, size  4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
        bus=0, slot=17, func=1
        class=01-01-8a, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=255
        powerspec 2  supports D0 D3  current D0
        map[20]: type 4, range 32, base 0000d800, size  5, enabled
pcib0: matched entry for 0.17.INTD (src \_SB_.PCI0.LNKD)
pcib0: slot 17 INTD is already routed to irq 5
found-> vendor=0x1106, dev=0x3038, revid=0x1b
        bus=0, slot=17, func=2
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=d, irq=5
        powerspec 2  supports D0 D3  current D0
        map[20]: type 4, range 32, base 0000dc00, size  5, enabled
pcib0: matched entry for 0.17.INTD (src \_SB_.PCI0.LNKD)
pcib0: slot 17 INTD is already routed to irq 5
found-> vendor=0x1106, dev=0x3038, revid=0x1b
        bus=0, slot=17, func=3
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=d, irq=5
        powerspec 2  supports D0 D3  current D0
        map[20]: type 4, range 32, base 0000e000, size  5, enabled
pcib0: matched entry for 0.17.INTD (src \_SB_.PCI0.LNKD)
pcib0: slot 17 INTD is already routed to irq 5
found-> vendor=0x1106, dev=0x3038, revid=0x1b
        bus=0, slot=17, func=4
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=d, irq=5
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 0000e400, size  8, enabled
pcib0: matched entry for 0.17.INTC (src \_SB_.PCI0.LNKC)
pcib0: slot 17 INTC is already routed to irq 12
found-> vendor=0x1106, dev=0x3059, revid=0x30
        bus=0, slot=17, func=5
        class=04-01-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=12
        powerspec 2  supports D0 D3  current D0
agp0: <VIA Generic host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0
agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xd0000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xe8000000-0xe9ffffff
pcib1:   prefetched decode 0xd8000000-0xe7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
        map[10]: type 1, range 32, base e8000000, size 24, enabled
pcib1: device (null) requested decoded memory range 0xe8000000-0xe8ffffff
        map[14]: type 3, range 32, base d8000000, size 27, enabled
pcib1: device (null) requested decoded memory range 0xd8000000-0xdfffffff
        map[18]: type 3, range 32, base e0000000, size 19, enabled
pcib1: device (null) requested decoded memory range 0xe0000000-0xe007ffff
pcib0: matched entry for 0.1.INTA (src \_SB_.PCI0.LNKA)
pcib0: possible interrupts:  1  3  4  5  6  7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\_SB_.PCI0.LNKB (references 8, priority 171469):
        interrupts:         11    10     5     7     6     4     3    12    15    14     1
        penalty:           960   960  1090  5960  5960  5960  5960  6040 50960 50960100960
\_SB_.PCI0.LNKA (references 8, priority 171469):
        interrupts:         11    10     5     7     6     4     3    12    15    14     1
        penalty:           960   960  1090  5960  5960  5960  5960  6040 50960 50960100960
pcib0: slot 1 INTA routed to irq 11 via \_SB_.PCI0.LNKA
pcib1: slot 0 INTA is routed to irq 11
found-> vendor=0x10de, dev=0x0253, revid=0xa3
        bus=1, slot=0, func=0
        class=03-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd000
rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem 0xea000000-0xea0000ff irq 12 at device 11.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:e0:7d:b4:31:c2
rl0: [MPSAFE]
pci0: <multimedia, video> at device 12.0 (no driver attached)
pci0: <multimedia> at device 12.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233 UDMA100 controller> port 0xd400-0xd40f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd400
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x90 err=0x01 lsb=0x14 msb=0xeb
ata1-master: stat=0x90 err=0x01 lsb=0x14 msb=0xeb
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 5 at device 17.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB Mouse, rev 1.10/6.20, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ukbd0: BTC USB Keyboard and Mouse, rev 1.00/21.10, addr 3, iclass 3/1
kbd0 at ukbd0
kbd0: ukbd0, generic (0), config:0x0, flags:0x1d0000
ums1: BTC USB Keyboard and Mouse, rev 1.00/21.10, addr 3, iclass 3/1
ums1: 3 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 5 at device 17.3 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdc00
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 5 at device 17.4 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe000
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <multimedia, audio> at device 17.5 (no driver attached)
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x21 0x31 0x21 0x21
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
sio1: irq maps: 0x21 0x29 0x21 0x21
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed fe
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 13: ioport 0xdc00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: not probed (disabled)
psm0: current command byte:0067
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5e 4f 50 81 53 80
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
18 18 18 18 1f 00 00 00 18 18 18 18 ff 00 00 00
00 00 00 00 ff 18 18 18 18 18 18 18 1f 18 18 18
00 00 00 00 ff 00 00 00 18 18 18 18 ff 18 18 18
18 18 1f 18 1f 18 18 18 36 36 36 36 37 36 36 36
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5e 4f 50 81 53 80
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1750008683 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ata0-master: pio=0x0c wdma=0x22 udma=0x46 cable=80pin
ata0-master: setting PIO4 on VIA 8233 chip
ata0-master: setting UDMA100 on VIA 8233 chip
ad0: <Maxtor 2F040L0/VAM51JJ0> ATA-7 disk at ata0-master
ad0: 39205MB (80293248 sectors), 79656 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
[0] f:00 typ:11 s(CHS):47/13/1 e(CHS):1023/7/63 s:48195 l:4192965
[1] f:00 typ:7 s(CHS):1023/255/63 e(CHS):1023/13/63 s:4241160 l:20980890
[2] f:00 typ:15 s(CHS):1023/255/63 e(CHS):1023/10/63 s:25222050 l:41945715
[3] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/9/63 s:67167765 l:13125105
GEOM: Configure ad0s1, start 24675840 length 2146798080 end 2171473919
GEOM: Configure ad0s2, start 2171473920 length 10742215680 end 12913689599
GEOM: Configure ad0s3, start 12913689600 length 21476206080 end 343898956stray irq7
79
GEOM: Configure ad0s4, start 34389895680 length 6720053760 end 41109949439
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
MBREXT Slice 5 on ad0s3:
[0] f:00 typ:11 s(CHS):1023/1/1 e(CHS):1023/254/63 s:63 l:41945652
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s5, start 32256 length 214stray irq7
76173824 end 21476206079
ata1-master: setting PIO4 on VIA 8233 chip
GEOM: Configure ad0s4a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s4b, start 268435456 length 805306368 end 1073741823
GEOM: Configure ad0s4c, start 0 length 6720053760 end 6720053759
GEOM: Configure ad0s4d, start 1073741824 length 268435456 end 1342177279
GEOM: Configure ad0s4e, start 1342177280 length 268435456 end 1610612735
GEOM: Configure ad0s4f, start 1610612736 length 5109441024 end 6720053759
ata1-master: setting UDMA33 on VIA 8233 chip
ata1-slave: setting PIO4 on VIA 8233 chip
ata1-slave: setting UDMA33 on VIA 8233 chip
acd0: <LITE-ON DVDRW SOHW-832S/VS03> DVDR drive at ata1 as master
acd0: read 6890KB/s (6890KB/s) write 6890KB/s (6890KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
acd1: <LITE-ON LTR-40125S/ZS0J> CDRW drive at ata1 as slave
acd1: read 33171KB/s (8250KB/s) write 172KB/s (6875KB/s), 1984KB buffer, UDMA33
acd1: Reads: CDR, CDRW, CDDA stream, packet
acd1: Writes: CDR, CDRW, test write, burnproof
acd1: Audio: play, 255 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s4a
start_init: trying /sbin/init

--=-ELE70YifvxOtgdFPgykr
Content-Disposition: attachment; filename=ktr-hang-wisnia.txt
Content-Type: text/plain; name=ktr-hang-wisnia.txt; charset=UTF-8
Content-Transfer-Encoding: 7bit

Uptime: 33s
LOCK (sleep mutex) eventhandler r = 0 at /usr/src/sys/kern/subr_eventhandler.c:213
LOCK (sleep mutex) shutdown_post_sync r = 0 at /usr/src/sys/kern/subr_eventhandler.c:216
UNLOCK (sleep mutex) eventhandler r = 0 at /usr/src/sys/kern/subr_eventhandler.c:217
eventhandler_invoke("shutdown_post_sync")
UNLOCK (sleep mutex) shutdown_post_sync r = 0 at /usr/src/sys/kern/kern_shutdown.c:416
eventhandler_invoke: executing 0xc066d8e0
# % addr2line -e /usr/obj/usr/src/sys/DEBUG/kernel.debug -f 0xc066d8e0
# kproc_shutdown
# /usr/src/sys/kern/kern_shutdown.c:625
LOCK (sleep mutex) shutdown_post_sync r = 0 at /usr/src/sys/kern/kern_shutdown.c:416
UNLOCK (sleep mutex) shutdown_post_sync r = 0 at /usr/src/sys/kern/kern_shutdown.c:416
eventhandler_invoke: executing 0xc04d0da0
# % addr2line -e /usr/obj/usr/src/sys/DEBUG/kernel.debug -f 0xc04d0da0
# ata_shutdown
# /usr/src/sys/dev/ata/ata-all.c:374
uma_zalloc_arg thread c2181c80 zone ata_request flags 257
LOCK (sleep mutex) UMA pcpu r = 0 at /usr/src/sys/vm/uma_core.c:1803
LOCK (sleep mutex) ata_request r = 0 at /usr/src/sys/vm/uma_core.c:1820
UNLOCK (sleep mutex) ata_request r = 0 at /usr/src/sys/vm/uma_core.c:1822
UNLOCK (sleep mutex) UMA pcpu r = 0 at /usr/src/sys/vm/uma_core.c:1824
LOCK (sleep mutex) All locks list r = 0 at /usr/src/sys/kern/subr_witness.c:528
UNLOCK (sleep mutex) All locks list r = 0 at /usr/src/sys/kern/subr_witness.c:534
sema_init(0xc23ec048, 0, "ATA request done")
LOCK (sleep mutex) ATA queue lock r = 0 at /usr/src/sys/dev/ata/ata-queue.c:86
UNLOCK (sleep mutex) ATA queue lock r = 0 at /usr/src/sys/dev/ata/ata-queue.c:91
LOCK (sleep mutex) ATA queue lock r = 0 at /usr/src/sys/dev/ata/ata-queue.c:166
LOCK (sleep mutex) ATA state lock r = 0 at /usr/src/sys/dev/ata/ata-queue.c:183
LOCK (spin mutex) callout r = 0 at /usr/src/sys/kern/kern_timeout.c:398
UNLOCK (spin mutex) callout r = 0 at /usr/src/sys/kern/kern_timeout.c:439
LOCK (spin mutex) clk r = 0 at /usr/src/sys/i386/isa/clock.c:404
UNLOCK (spin mutex) clk r = 0 at /usr/src/sys/i386/isa/clock.c:412
LOCK (spin mutex) clk r = 0 at /usr/src/sys/i386/isa/clock.c:404
UNLOCK (spin mutex) clk r = 0 at /usr/src/sys/i386/isa.clock.c:412
UNLOCK (sleep mutex) ATA queue lock r = 0 at /usr/src/sys/dev/ata/ata-queue.c:202
UNLOCK (sleep mutex) ATA queue lock r = 0 at /usr/src/sys/dev/ata/ata-queue.c:205

--=-ELE70YifvxOtgdFPgykr--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1104087611.62361.13.camel>