Date: Tue, 16 Sep 1997 22:58:42 +0200 From: Mark Murray <mark@grondar.za> To: multimedia@freebsd.org Subject: GUS PnP and the new PnP code in 3.0 Message-ID: <199709162058.WAA01568@greenpeace.grondar.za>
next in thread | raw e-mail | index | archive | help
Hi
I have not being paying much attention to the PnP code in 3.0
(Sorry Luigi!), and now I have been bitten.
My GUS PnP no longer gets probed properly at boot time. Which is the
working code right now?
I am using GUSPNP18 at the moment.
Here is output from my dmesg:
Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #0: Tue Sep 16 22:40:50 SAT 1997
root@greenpeace.grondar.za:/usr/src/sys/compile/GA586DX
CPU: Pentium (200.45-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping=12
Features=0x3bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC>
real memory = 67108864 (65536K bytes)
avail memory = 63442944 (61956K bytes)
DEVFS: ready for devices
Probing for devices on PCI bus 0:
chip0: <Intel 82439> rev 0x03 on pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
vga0: <VGA-compatible display device> rev 0x06 int a irq 14 on pci0.8.0
bktr0: <BrookTree 848> rev 0x11 int a irq 14 on pci0.9.0
Hauppauge WinCast/TV, Temic PAL tuner.
vx0: <3COM 3C900 Etherlink XL PCI> rev 0x00 int a irq 14 on pci0.10.0
utp/aui/bnc[*bnc*] address 00:60:97:38:5c:12
ahc0: <Adaptec aic7880 Ultra SCSI host adapter> rev 0x00 int a irq 14 on pci0.12.0
ahc0: Using left over BIOS settings
ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
ahc0: waiting for scsi devices to settle
scbus0 at ahc0 bus 0
sd0 at scbus0 target 0 lun 0
sd0: <SEAGATE ST52160N 0285> type 0 fixed SCSI 2
sd0: Direct-Access 2069MB (4238282 512 byte sectors)
st0 at scbus0 target 3 lun 0
st0: <HP HP35480A T603> type 1 removable SCSI 2
st0: Sequential-Access density code 0x13, drive empty
cd0 at scbus0 target 6 lun 0
cd0: <NEC CD-ROM DRIVE:463 1.05> type 5 removable SCSI 2
cd0: CD-ROM cd present [125633 x 2048 byte records]
Initializing PnP override table
Probing for PnP devices:
CSN 1 Vendor ID: GRV0001 [0x0100561e] Serial 0x00000001
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: device ID 0
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
gus0 at ? on isa
WARNING! GUS found at 220, config was ffffffff ERROR! Invalid IRQ#-1. GUS Disabled
DEVFS: ready to run
...and here is my kernel config file:
#
# GA586DX -- Mark's Monster
#
# $Id$
machine "i386"
cpu "I586_CPU"
ident "GA586DX"
maxusers 16
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options NFS #Network Filesystem
options MFS #Network Filesystem
options "CD9660" #ISO 9660 Filesystem
options PROCFS #Process filesystem
options KERNFS #Kernel filesystem
options DEVFS #Device filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device
options UCONSOLE #Allow users to grab the console
options KTRACE #kernel tracing
options PERFMON #Performance monitor
options SYSVSHM #SYSV shared memory support
options SYSVSEM #SYSV semaphore support
options SYSVMSG #SYSV message queue support
## Create a SMP capable kernel (mandatory options):
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
#
## Lets always enable the kernel debugger for SMP.
#options DDB
config kernel root on sd0
controller isa0
controller pci0
controller pnp0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
controller ahc0
controller scbus0
device sd0
device st0
device cd0
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
device lpt0 at isa? port? tty irq 7 vector lptintr
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
device vx0
device bktr0
controller snd0
device gus0 at isa? vector gusintr
pseudo-device loop
pseudo-device ether
pseudo-device log
pseudo-device tun 2
pseudo-device vn 2
pseudo-device pty 16
pseudo-device gzip
pseudo-device speaker
Thanks!
M
--
Mark Murray
Join the anti-SPAM movement: http://www.cauce.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199709162058.WAA01568>