Date: Mon, 22 Sep 2003 12:29:34 +0200 (CEST) From: Melvyn Sopacua <melvyn@webteckies.org> To: FreeBSD-gnats-submit@FreeBSD.org Cc: Nate Lawson <nate@root.org> Subject: kern/57085: umass0 problems, with Sony Vio/USB memory stick Message-ID: <20030922102934.52D2C21B73@ghost.lan.webteckies.org> Resent-Message-ID: <200309221040.h8MAeC2f055811@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 57085 >Category: kern >Synopsis: umass0 problems, with Sony Vio/USB memory stick >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Mon Sep 22 03:40:11 PDT 2003 >Closed-Date: >Last-Modified: >Originator: Melvyn Sopacua >Release: FreeBSD 4.8-STABLE i386 >Organization: >Environment: System: FreeBSD dreetje.thuisnetwerk.lan 4.8-STABLE FreeBSD 4.8-STABLE #5: Wed Aug 27 13:53:18 CEST 2003 root@dreetje.thuisnetwerk.lan:/usr/obj/usr/src/sys/DREETJE i386 Controller /dev/usb0: addr 1: self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 powered >Description: Timeouts on startup and no da0 device. dmesg.boot: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-STABLE #5: Wed Aug 27 13:53:18 CEST 2003 root@dreetje.thuisnetwerk.lan:/usr/obj/usr/src/sys/DREETJE Timecounter "i8254" frequency 1193182 Hz CPU: Intel(R) Pentium(R) III Mobile CPU 866MHz (861.69-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 267911168 (261632K bytes) avail memory = 256331776 (250324K bytes) Preloaded elf kernel "kernel" at 0xc0434000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 9 entries at 0xc00fdf30 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82830 host to AGP bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0 pcib1: <PCI to PCI bridge (vendor=8086 device=3576)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <ATI model 4c59 graphics accelerator> at 0.0 irq 9 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 9 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 9 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f at device 29.2 on pci0 pci_cfgintr_search: linked (0) to configured irq 9 at 0:29:1 pci_cfgintr: 0:29 INTC routed to irq 9 usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered umass0: Sony USB Memory Stick Slot, rev 1.10/1.80, addr 2 pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 fwohci0: <Texas Instruments TSB43AA22> mem 0xd0200000-0xd0203fff,0xd0205000-0xd02057ff at device 2.0 on pci2 fwohci0: Invalid irq 255 fwohci0: Please switch PNP-OS to 'No' in BIOS pci_cfgintr_search: linked (0) to configured irq 3 at 2:5:0 pci_cfgintr: 2:2 INTA routed to irq 3 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 08:00:46:03:00:d6:36:f2 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 if_fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 0a:00:46:d6:36:f2 sbp0: <SBP2/SCSI over firewire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pcic0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 3 at device 5.0 on pci2 pcic0: PCI Memory allocated: 0x88000000 pccard0: <PC Card 16-bit bus (classic)> on pcic0 pci_cfgintr_search: linked (0) to configured irq 3 at 2:2:0 pci_cfgintr: 2:5 INTB routed to irq 3 pcic1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 3 at device 5.1 on pci2 pcic1: PCI Memory allocated: 0x88001000 pccard1: <PC Card 16-bit bus (classic)> on pcic1 fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x4000-0x403f mem 0xd0204000-0xd0204fff irq 9 at device 8.0 on pci2 fxp0: Ethernet address 08:00:46:26:54:b4 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xd0000000-0xd00003ff at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 pcm0: <Intel 82801CA (ICH3)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 9 at device 31.5 on pci0 pcm0: <Analog Devices AD1881A ac97 codec> pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 eisa0: <EISA bus> on motherboard eisa0: unknown card @H@0000 (0x01000000) at slot 1 orm0: <Option ROMs> at iomem 0xc0000-0xcefff,0xd8000-0xdbfff,0xdc000-0xdffff on isa0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ata1-slave: ATAPI identify retries exceeded ad0: 14403MB <HITACHI_DK23CA-15> [29264/16/63] at ata0-master UDMA100 acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2502> at ata1-master PIO4 umass0: CBI reset failed, TIMEOUT umass0: CBI bulk-in stall clear failed, TIMEOUT umass0: CBI bulk-out stall clear failed, TIMEOUT umass0: CBI reset failed, TIMEOUT umass0: CBI bulk-in stall clear failed, TIMEOUT umass0: CBI bulk-out stall clear failed, TIMEOUT umass0: CBI reset failed, TIMEOUT umass0: CBI bulk-in stall clear failed, TIMEOUT umass0: CBI bulk-out stall clear failed, TIMEOUT umass0: CBI reset failed, TIMEOUT umass0: CBI bulk-in stall clear failed, TIMEOUT umass0: CBI bulk-out stall clear failed, TIMEOUT umass0: CBI reset failed, TIMEOUT umass0: CBI bulk-in stall clear failed, TIMEOUT umass0: CBI bulk-out stall clear failed, TIMEOUT Mounting root from ufs:/dev/ad0s2a cd0 at ata1 bus 0 target 0 lun 0 cd0: <TOSHIBA DVD-ROM SD-C2502 1513> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: cd present [56239 x 2048 byte records] usbdevs -v is above. camcontrol reports a non-existent da0 device. >How-To-Repeat: boot the machine. >Fix: unknown. option DA_OLD_QUIRCKS has no influence >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030922102934.52D2C21B73>