Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 8 Sep 2014 04:43:55 -0700
From:      Mark Millard <markmi@dsl-only.net>
To:        freebsd-ppc@freebsd.org
Subject:   Xorg/xfce4 vs. NVIDIA GeForce4 Ti 4600 on PowerMac G4: an odd display problem
Message-ID:  <2150A9D2-7876-4731-B0D1-441E20711441@dsl-only.net>

next in thread | raw e-mail | index | archive | help
[This message gives what was a side note in another message its own =
message.]

NVIDIA GeForce4 Ti 4600 when used at 1680x1050 (at least on an ADC =
display from a G4 PowerMac):

What should be the last 8 pixels or so on the right are instead near the =
left hand side of the display, about 8 pixels from the left side in =
fact. (This had been observed before the fix after a ports update but =
with the hang/quit status I did not want to assume much about the =
incomplete display updates at the time.)

In total all the pixels are probably there. There is just a band of =
pixels that is way out of place. (So all the pixels after them are then =
shifted from where they should be by the width of that band.)

Also the oddly placed, about 8 pixel wide band appears to be shifted =
down one pixel from what would be expected. (Easily visible at the edge =
of the menu bar across the top.)

At 1400x1050 there are no such problem bands. Nor probably at 1280x1024. =
(But 1280x1024 is not a nice display in many other ways. I did not look =
carefully at 1280x1024.)

The Xorg.0.log's do show an alternate Modeline for 1680x1050:

[    73.585] (**) NV(0): *Driver mode "1680x1050": 117.1 MHz, 63.7 kHz, =
59.9 Hz
[    73.585] (II) NV(0): Modeline "1680x1050"x59.9  117.13  1680 1744 =
1776 1840  1050 1053 1056 1062 +hsync +vsync (63.7 kHz ezP)
[    73.585] (**) NV(0): *Driver mode "1680x1050": 119.0 MHz, 64.7 kHz, =
59.9 Hz
[    73.585] (II) NV(0): Modeline "1680x1050"x59.9  119.00  1680 1728 =
1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz ez)
[    73.585] (**) NV(0): *Default mode "1400x1050": 122.0 MHz, 64.9 kHz, =
60.0 Hz
[    73.585] (II) NV(0): Modeline "1400x1050"x60.0  122.00  1400 1488 =
1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz zd)
[    73.585] (**) NV(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, =
60.0 Hz
[    73.585] (II) NV(0): Modeline "1280x1024"x60.0  108.00  1280 1328 =
1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz zd)


The other NVIDIA cards and the Radeon's that I tried in various G4 and =
G5 PowerMac's do not show this display problem at the pixel counts that =
they allow. The display works normally under Mac OS X 10.4 and 10.5.


Context:

FreeBSD FBSDG4S0 10.1-PRERELEASE FreeBSD 10.1-PRERELEASE #0 r271215: Sat =
Sep  6 23:56:15 PDT 2014     root at =
FBSDG4S0:/usr/obj/usr/src/sys/GENERIC  powerpc

portsnap was used and all ports were rebuilt from scratch, including =
Xorg and xfce4.




=3D=3D=3D
Mark Millard
markmi@dsl-only.net




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2150A9D2-7876-4731-B0D1-441E20711441>