From owner-freebsd-stable  Thu Apr 25 11: 9:57 2002
Delivered-To: freebsd-stable@freebsd.org
Received: from postoffice.igalaxy.net (hal.igalaxy.net [64.160.104.142])
	by hub.freebsd.org (Postfix) with ESMTP id 1A70037B405
	for <freebsd-stable@freebsd.org>; Thu, 25 Apr 2002 11:09:53 -0700 (PDT)
Received: from mikeyg [64.160.106.122] by postoffice.igalaxy.net
  (SMTPD32-7.06) id AAF355BB0048; Thu, 25 Apr 2002 11:29:07 -0700
Message-ID: <01f701c1ec84$6194bb60$0301a8c0@mikeyg>
Reply-To: "Mike Grissom" <mikeyg@speedfusion.net>
From: "Mike Grissom" <mikeyg@speedfusion.net>
To: <freebsd-stable@freebsd.org>
References: <Pine.LNX.4.21.0204250921370.23049-100000@danzig.sd.quantified.net>
Subject: Re: SCSI Controller
Date: Thu, 25 Apr 2002 11:09:45 -0700
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 6.00.2600.0000
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000
Sender: owner-freebsd-stable@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-stable.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-stable>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-stable>
X-Loop: FreeBSD.ORG

Hmmmmm  This one is very old like made in 96-97.  What RAID type are you
using?

----- Original Message -----
From: "Doug Silver" <dsilver@urchin.com>
To: "Mike Grissom" <mikeyg@speedfusion.net>
Sent: Thursday, April 25, 2002 9:25 AM
Subject: Re: SCSI Controller


> On Thu, 25 Apr 2002, Mike Grissom wrote:
>
> > I have an old hp netserver 5/60LM server which has 7 2GB harddrives in
> > it configured for a disk array.  For some reason its only seeing one
> > or two of the drives.  The controller is a SmartCACHE III by DPT.  So
> > we tested out installing windows NT onto it and windows NT
> > automatically saw 1 14GB harddrive instead of 7 2GBs.  What could be
> > causing this.  The disk array configuration is correct otherwise it
> > wouldnt be letting NT see it.  Does FreeBSD not support it?  Thanks in
> > advance!
> >
> >
>
> Hi Mike -
>
> I also have a couple of old HP netservers (i.e. toasters), multi-CPU, scsi
> RAID, etc.  FreeBSD didn't have any problems recognizing the single
> (striped) drive I set up.
>
>  --
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Doug Silver
> Network Manager
> Urchin Corporation http://www.urchin.com
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> Here's what it sees during bootup:
>
> amr0: <AMI MegaRAID> port 0xec80-0xecff irq 11 at device 10.0 on pci1
> amr0: <Series 428> Firmware , BIOS , 4MB RAM
> ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0xe800-0xe8ff mem
> 0xfe1fb000-0xfe1fbfff irq 14 at device 11.0 on pci1
> ahc0: Using left over BIOS settings
> aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs
> ahc1: <Adaptec aic7880 Ultra SCSI adapter> port 0xe400-0xe4ff mem
> 0xfe1fa000-0xfe1fafff irq 5 at device 12.0 on pci1
> ahc1: Using left over BIOS settings
> aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs
> ahc2: <Adaptec 2902/04/10/15/20/30C SCSI adapter> port 0xe000-0xe0ff mem
> 0xfe1f9000-0xfe1f9fff irq 9 at device 14.0 on pci1
> aic7850: Single Channel A, SCSI Id=7, 3/255 SCBs
>
>
>


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message