Date: Tue, 4 Mar 2008 08:01:38 -0500 From: "B. Cook" <bcook@poughkeepsieschools.org> To: freebsd-questions@freebsd.org Subject: DQ965GF Finally Works.. Message-ID: <70A0E11A-D5C2-4D5E-A60D-0ED84C66AA7B@poughkeepsieschools.org>
next in thread | raw e-mail | index | archive | help
Hello all,
I have a few of these that have been problematic with several
seemingly simple things.. like 1000baseTX and booting in under 5
minutes (polls the floppy for almost 4 minutes)..
but with FreeBSD 6.3 the motherboard seems 'normal' finally.
wanted to say thank you and post a dmesg
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.3-RELEASE-p1 #0: Mon Mar 3 14:33:07 EST 2008
root@core.phs.pcsd:/usr/obj/usr/src/sys/SMP
acpi_alloc_wakeup_handler: can't alloc wake memory
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) D CPU 2.66GHz (2674.67-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf47 Stepping = 7
Features
=
0xbfebfbff
<
FPU
,VME
,DE
,PSE
,TSC
,MSR
,PAE
,MCE
,CX8
,APIC
,SEP
,MTRR
,PGE
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x651d<SSE3,RSVD2,MON,DS_CPL,TM2,CNXT-ID,CX16,xTPR>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 1046810624 (998 MB)
avail memory = 1010847744 (964 MB)
ACPI APIC Table: <INTEL DQ965GF >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Mar 3 2008 14:31:42)
acpi0: <INTEL DQ965GF> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <display, VGA> at device 2.0 (no driver attached)
pci0: <simple comms> at device 3.0 (no driver attached)
atapci0: <Intel ATA controller> port 0x2130-0x2137,0x214c-0x214f,
0x2128-0x212f,0x2148-0x214b,0x2100-0x210f irq 18 at device 3.2 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
pci0: <simple comms, UART> at device 3.3 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.2> port
0x20e0-0x20ff mem 0x50300000-0x5031ffff,0x50324000-0x50324fff irq 20
at device 25.0 on pci0
em0: Ethernet address: 00:19:d1:89:fb:84
uhci0: <UHCI (generic) USB controller> port 0x20c0-0x20df irq 16 at
device 26.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x20a0-0x20bf irq 21 at
device 26.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0x50326c00-0x50326fff
irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci1: <Marvell 88SX6101 UDMA133 controller> port 0x1018-0x101f,
0x1024-0x1027,0x1010-0x1017,0x1020-0x1023,0x1000-0x100f mem
0x50100000-0x501001ff irq 17 at device 0.0 on pci2
ata4: <ATA channel 0> on atapci1
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib5
uhci2: <UHCI (generic) USB controller> port 0x2080-0x209f irq 23 at
device 29.0 on pci0
uhci2: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x2060-0x207f irq 19 at
device 29.1 on pci0
uhci3: [GIANT-LOCKED]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0x2040-0x205f irq 18 at
device 29.2 on pci0
uhci4: [GIANT-LOCKED]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0x50326800-0x50326bff
irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci1
usb6: USB revision 2.0
uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
fwohci0: <Texas Instruments TSB43AB22/A> mem 0x50004000-0x500047ff,
0x50000000-0x50003fff irq 19 at device 3.0 on pci6
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:90:27:00:01:ca:b2:f0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:90:27:ca:b2:f0
fwe0: Ethernet address: 02:90:27:ca:b2:f0
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci2: <Intel AHCI controller> port 0x2118-0x211f,
0x2144-0x2147,0x2110-0x2117,0x2140-0x2143,0x2020-0x203f mem
0x50326000-0x503267ff irq 19 at device 31.2 on pci0
atapci2: AHCI Version 01.10 controller with 6 ports detected
ata5: <ATA channel 0> on atapci2
ata6: <ATA channel 1> on atapci2
ata7: <ATA channel 2> on atapci2
ata8: <ATA channel 3> on atapci2
ata9: <ATA channel 4> on atapci2
ata10: <ATA channel 5> on atapci2
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f0 irq 6 drq 2 on
acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7
on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcd000-0xcdfff,
0xce000-0xcefff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
ukbd0: Dell Dell USB Keyboard, rev 1.10/3.06, addr 2, iclass 3/1
kbd2 at ukbd0
Timecounters tick every 1.000 msec
hptrr: no controller detected.
acd0: CDRW <LITE-ON CD R LH52R1P/XL13> at ata4-master UDMA33
ad10: 76319MB <Seagate ST380815AS 3.AAC> at ata5-master SATA300
ad12: 76319MB <Seagate ST380815AS 3.AAC> at ata6-master SATA300
SMP: AP CPU #1 Launched!
GEOM_MIRROR: Device gm0 created (id=244899767).
GEOM_MIRROR: Device gm0: provider ad10 detected.
GEOM_MIRROR: Device gm0: provider ad12 detected.
GEOM_MIRROR: Device gm0: provider ad12 activated.
GEOM_MIRROR: Device gm0: provider ad10 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
Trying to mount root from ufs:/dev/mirror/gm0s1a
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
inet 10.20.0.16 netmask 0xffffff00 broadcast 10.20.0.255
inet 10.20.0.29 netmask 0xffffffff broadcast 10.20.0.29
inet 10.20.0.64 netmask 0xffffffff broadcast 10.20.0.64
ether 00:19:d1:89:fb:84
media: Ethernet autoselect (1000baseTX <full-duplex>)
status: active
Thanks again for making another great release.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?70A0E11A-D5C2-4D5E-A60D-0ED84C66AA7B>