Date: Sun, 19 Aug 2018 21:00:47 +0200 From: Emmanuel Vadot <manu@bidouilliste.com> To: John-Mark Gurney <jmg@funkthat.com> Cc: freebsd-arm@FreeBSD.org Subject: Re: attempted to get A64-LTS thermal working Message-ID: <20180819210047.2421f482b29457025b27643d@bidouilliste.com> In-Reply-To: <20180813173220.GL97145@funkthat.com> References: <20180813173220.GL97145@funkthat.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi John-Mark, On Mon, 13 Aug 2018 10:32:20 -0700 John-Mark Gurney <jmg@funkthat.com> wrote: > So, w/ a pointer from manu: https://twitter.com/manuvadot/status/1029002683892609026 > > I'm working from the July 9th snapshot, FreeBSD-12.0-CURRENT-arm64-aarch64-PINE64-20180709-r336134.img > > I tried to put the dtb on the FAT partition, but u-boot doesn't seem to > load it: > [freebsd@generic ~]$ ls /boot/msdos/dtb/allwinner/sun50i-a64-sopine-baseboard.dtb > /boot/msdos/dtb/allwinner/sun50i-a64-sopine-baseboard.dtb > > So, I decided to manually load the dtb w/ loader: > OK set currdev=disk0p1: > OK load -t dtb dtb/allwinner/sun50i-a64-sopine-baseboard.dtb > dtb/allwinner/sun50i-a64-sopine-baseboard.dtb size=0x5c63 > > and w/ it loaded, I can see the thermal device: > aw_thermal0: <Allwinner Thermal Sensor Controller> mem 0x1c25000-0x1c250ff irq 8 on simplebus0 > > and: > root@generic:~ # sysctl -a | grep therm > dev.aw_thermal.0.gpu2: 24C > dev.aw_thermal.0.gpu1: 23C > dev.aw_thermal.0.cpu: 24C > dev.aw_thermal.0.%parent: simplebus0 > dev.aw_thermal.0.%pnpinfo: name=thermal_sensor@1c25000 compat=allwinner,sun50i-a64-ths > dev.aw_thermal.0.%location: > dev.aw_thermal.0.%driver: aw_thermal > dev.aw_thermal.0.%desc: Allwinner Thermal Sensor Controller > dev.aw_thermal.%parent: > > but then the ethernet does not work: > awg0: <Allwinner Gigabit Ethernet> mem 0x1c30000-0x1c3ffff irq 30 on simplebus0 > awg0: Failed to find syscon node > awg0: cannot get syscon driver handle > miibus0: <MII bus> on awg0 > rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0 > rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow > rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 > rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow > awg0: Ethernet address: 02:ba:1a:xx:xx:xx > > and it never gets link: > Waiting 30s for the default route interface: .....(no carrier) > > I've put the broken boot at: > https://www.funkthat.com/~jmg/FreeBSD/arm/a64-lts.broken.20180813.txt > > I've put the working boot at: > https://www.funkthat.com/~jmg/FreeBSD/arm/a64-lts.working.20180813.txt > > took me a few seconds to realize that the reason they are about the > same length is that the broken has additional other drivers like the > mx2510 flash driver and spi. > > -- > John-Mark Gurney Voice: +1 415 225 5579 > > "All that I will do, has been done, All that I have, has not." > _______________________________________________ > freebsd-arm@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" This is now fixed with r338070 Thanks for reporting. -- Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20180819210047.2421f482b29457025b27643d>