Date: Wed, 15 Jan 2003 21:54:57 -0700 From: Scott Long <scott_long@btc.adaptec.com> To: Andy Farkas <andyf@speednet.com.au> Cc: freebsd-scsi@freebsd.org Subject: Re: Adaptec 274X b0rked Message-ID: <3E263B21.70401@btc.adaptec.com> In-Reply-To: <20030116123643.F36296-100000@hewey.af.speednet.com.au> References: <20030116123643.F36296-100000@hewey.af.speednet.com.au>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a known issue, and we unfortunately didn't have time to
import the fix in time for the 5.0 release. The fix should will get
imported in the next few days.
Scott
Andy Farkas wrote:
> ahc0: at 0x4c00-0x4cff, irq 15 (level)
> ahc0: on eisa0 slot 4
> aic7770: Twin Channel, A SCSI Id=7, B SCSI Id=7, primary A, 4/253 SCBs
>
> Works with DP2, no work with RC3:
>
> ahc0: brkadrint, Illegal Sequencer Address referrenced at seqaddr = 0x1
> ahc0: Dumping Card State while idle, at SEQADDR 0x1
>
> [lots of dump stuff not shown; transcribing by hand, but boot continues:]
>
> Waiting 15 seconds for SCSI devices to settle
> Waiting List inconsistency. SCB index == 255, yet numscbs == 10.
> ahc0: Dumping Card State in Data-out phase, at SEQADDR 0x0
>
> [more dump stuff...]
>
> panic: for safety
>
> syncing disks, buffers remaining...
> done
> Uptime 1s
>
>
>
> If its necessary, i can stick a sio in it and get verbose log...
>
>
> --
>
> :{ andyf@speednet.com.au
>
> Andy Farkas
> System Administrator
> Speednet Communications
> http://www.speednet.com.au/
>
>
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-scsi" in the body of the message
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E263B21.70401>