Date: Sun, 25 Nov 2007 19:53:21 -0600 From: "Kelly Hays" <j.kelly.hays@gmail.com> To: "Doug Barton" <dougb@freebsd.org> Cc: freebsd-x11@freebsd.org, freebsd-ports@freebsd.org, Anton Berezin <tobez@tobez.org> Subject: Re: X Can't "see" my docked monitor - xorg or nvidia? Message-ID: <4f615770711251753j75f5ee16h3b490f619d15654b@mail.gmail.com> In-Reply-To: <alpine.BSF.0.99999.0711111354030.40775@ync.qbhto.arg> References: <alpine.BSF.0.9999.0711061307470.1136@ync.qbhto.arg> <20071107085538.GA70315@heechee.tobez.org> <alpine.BSF.0.99999.0711111354030.40775@ync.qbhto.arg>
next in thread | previous in thread | raw e-mail | index | archive | help
Doug, Did you ever get this working? I have a simular problem and the workaround I found is to use the "nvidia-driver-96xx" port instead of the regular "nvidia-driver" port. I can not remember the exact model of the Dell FP display that I have ( it is at work) but it is the same resolution (1600x1200). On Nov 11, 2007 4:01 PM, Doug Barton <dougb@freebsd.org> wrote: > Thanks for responding, sorry it took so long to get back to you, > $REAL_LIFE is in my face lately. > > >> All my ports are up to date, including kde 3.5.8, and nvidia-driver > >> 100.14.19. I also tried with and without the -ignoreABI option, no change. > >> I should also point out that I'm using kdm, but I was using it before the > >> upgrade too. Turning kdm off and using startx has no effect (still comes up > >> only on the laptop screen). > > > >> Any suggestions? > > > > The content of /var/log/Xorg.0.log might be useful, > > http://people.freebsd.org/~dougb/Xorg.0.log > > There are a couple of interesting sections: > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 > (WW) OS did not count PCI devices, guessing wildly > > and > (--) NVIDIA(0): Connected display device(s) on Quadro NVS 110M at > PCI:1:0:0: > (--) NVIDIA(0): DELL 2001FP (CRT-0) > (--) NVIDIA(0): LPL (DFP-0) > (--) NVIDIA(0): DELL 2001FP (CRT-0): 400.0 MHz maximum pixel clock > (--) NVIDIA(0): LPL (DFP-0): 330.0 MHz maximum pixel clock > (--) NVIDIA(0): LPL (DFP-0): Internal Dual Link LVDS > > That all looks right, but > > (II) NVIDIA(0): Assigned Display Device: DFP-0 > > That should not be, since the only screen mentioned in xorg.conf > (http://people.freebsd.org/~dougb/xorg.conf) is the 2001FP. > > (WW) NVIDIA(0): No valid modes for "1600x1200"; removing. > > This makes sense because the laptop screen doesn't do that resolution, > it's for the 2001FP. > > > but also try and play with xrandr. Xrandr --verbose should tell you > > what outputs i actually sees, and then you can disable/enable individual > > outputs and see what happens. > > Screen 0: minimum 320 x 240, current 1440 x 900, maximum 1440 x 900 > default connected 1440x900+0+0 (0x19a) normal (normal) 0mm x 0mm > Identifier: 0x199 > Timestamp: 811385259 > Subpixel: unknown > Clones: > CRTC: 0 > CRTCs: 0 > 1440x900 (0x19a) 64.8MHz > h: width 1440 start 0 end 0 total 1440 skew 0 clock > 45.0KHz > v: height 900 start 0 end 0 total 900 clock > 50.0Hz > ... > > No mention of the 2001FP at all. > > > Thanks again, > > Doug > If my info will help I'll be glad to gather any needed details tomorrow at work. Let me know if you find a solution and I will try it here too. Thanks, Kelly
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4f615770711251753j75f5ee16h3b490f619d15654b>