Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 27 Jan 2004 21:13:39 -0500
From:      slave-mike <slave-mike@slavepix.com>
To:        Andrew Thomson <andrewjt@applecomm.net>
Cc:        freebsd-current@freebsd.org
Subject:   Re: atapi cdrecord under 5.2
Message-ID:  <40171AD3.9000707@slavepix.com>
In-Reply-To: <1075254712.2786.42.camel@itouch-1011.prv.au.itouchnet.net>
References:  <1075254712.2786.42.camel@itouch-1011.prv.au.itouchnet.net>

next in thread | previous in thread | raw e-mail | index | archive | help
atapicam is currently "not quite right"
add the -force flag for cdrecord (--force for cdrdao)
Andrew Thomson wrote:

>having the following problem trying to burn an iso to cd using cdrecord.
>
>Using libscg version 'schily-0.7'
>Device type    : Removable CD-ROM
>Version        : 0
>Response Format: 1
>Vendor_info    : 'CREATIVE'
>Identifikation : 'CD-RW RW1210E   '
>Revision       : 'LCS6'
>Device seems to be: Generic mmc CD-RW.
>Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
>Driver flags   : MMC SWABAUDIO BURNFREE 
>Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96P RAW/R96R
>Starting to write CD/DVD at speed 12 in real TAO mode for single
>session.
>Last chance to quit, starting real write    0 seconds. Operation starts.
>cdrecord: Input/output error. send opc: scsi sendcmd: retryable error
>CDB:  54 01 00 00 00 00 00 00 00 00
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>00 00 00 00 00 00 00 00 00 00 00 00
>Sense Key: 0xFFFFFFFF [], Segment 0
>Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
>Sense flags: Blk 0 (not valid) 
>cmd finished after 0.000s timeout 60s
>cdrecord: OPC failed.
>
>scsibus1:
>        1,0,0   100) 'LG      ' 'CD-ROM CRD-8400B' '1.04' Removable
>CD-ROM
>        1,1,0   101) 'CREATIVE' 'CD-RW RW1210E   ' 'LCS6' Removable
>CD-ROM
>        1,2,0   102) *
>        1,3,0   103) *
>        1,4,0   104) *
>
>Am running as root to avoid any issues there and cdrecord command is:
>
>cdrecord dev=1,1,0 5.2-RELEASE-i386-miniinst.iso
>
>>From dmesg:
>
>pass1 at ata1 bus 0 target 1 lun 0
>pass1: <CREATIVE CD-RW RW1210E LCS6> Removable CD-ROM SCSI-0 device 
>pass1: 16.000MB/s transfers
>
>Having just read the handbook page, I found I could use the burncd for
>my ide burner however in the past, I have successfully used the atapicam
>stuff with cdrecord.
>
>So the burner does work a treat:
>
>burncd -f /dev/acd1 data 5.2-RELEASE-i386-miniinst.iso fixate
>next writeable LBA 0
>writing from file 5.2-RELEASE-i386-miniinst.iso size 242336 KB
>written this track 242336 KB (100%) total 242336 KB
>fixating CD, please wait..
>
>but not with cdrecord/atapicam it would appear.
>
>Any thoughts?
>
>ajt.
>
>
>_______________________________________________
>freebsd-current@freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-current
>To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
>  
>




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?40171AD3.9000707>