Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 10 Feb 2002 09:15:28 +0100
From:      Simon Siemonsma <s.siemonsma@hccnet.nl>
To:        freebsd-questions@freebsd.org
Subject:   Fwd: Re: Print configuration
Message-ID:  <20020210081529.761CD51B@fia168-94.dsl.hccnet.nl>

next in thread | raw e-mail | index | archive | help
Your printer is neither a postscript nor a plaintext printer. You have a so
called Windows printers. This means that they don't have a processor on
board, and that all calculations neccesary for printing are done on your
computer.
What you need is a filter which translates postscript or plaintext into
something you printer understands. www.linuxprinting.org maintains a database
of available filters for different printers.
In your case you will need pnm2ppa, which is in the ports.

In case you use want to use LPD: install the port, adjust the printcap file
as in the pkg-comments and everything should work fine.

In case you want to use CUPS, don't forget to tell me what you did to get it
working.

Simon

On Saturday 09 February 2002 23:28, you wrote:
> I am setting up a standared paralell port printer on my FreeBSD system.
> (HP DeskJet 722c)  I'm not sure if its post-script of plain text, but i
> have tried both ways.  I cannot access it w/ lpttest > lpt0 or cat
> /printtest > lpt0.  /preinntest is a postscript file.  I believe i have set
> the print stuff up correctly in the kernel config.
>
> Thanks,
> Jeff Jeter
>
> Kernel config:
> #
> # GENERIC -- Generic kernel configuration file for FreeBSD/i386
> #
> # For more information on this file, please read the handbook section on
> # Kernel Configuration Files:
> #
> #    http://www.FreeBSD.org/handbook/kernelconfig-config.html
> #
> # The handbook is also available locally in /usr/share/doc/handbook
> # if you've installed the doc distribution, otherwise always see the
> # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
> # latest information.
> #
> # An exhaustive list of options and more detailed explanations of the
> # device lines is also present in the ./LINT configuration file. If you are
> # in doubt as to the purpose or necessity of a line, check first in LINT.
> #
> # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.34 2001/08/12 13:13:46
> joerg Exp $
>
> machine  i386
> cpu  I386_CPU
> cpu  I486_CPU
> cpu  I586_CPU
> cpu  I686_CPU
> ident  GENERIC
> maxusers 32
>
> #makeoptions DEBUG=-g  #Build kernel with gdb(1) debug symbols
>
> options  MATH_EMULATE  #Support for x87 emulation
> options  INET   #InterNETworking
> options  INET6   #IPv6 communications protocols
> options  FFS   #Berkeley Fast Filesystem
> options  FFS_ROOT  #FFS usable as root device [keep this!]
> options  SOFTUPDATES  #Enable FFS soft updates support
> options  MFS   #Memory Filesystem
> options  MD_ROOT   #MD is a potential root device
> options  NFS   #Network Filesystem
> options  NFS_ROOT  #NFS usable as root device, NFS required
> options  MSDOSFS   #MSDOS Filesystem
> options  CD9660   #ISO 9660 Filesystem
> options  CD9660_ROOT  #CD-ROM usable as root, CD9660 required
> options  PROCFS   #Process filesystem
> options  COMPAT_43  #Compatible with BSD 4.3 [KEEP THIS!]
> options  SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
> options  UCONSOLE  #Allow users to grab the console
> options  USERCONFIG  #boot -c editor
> options  VISUAL_USERCONFIG #visual boot -c editor
> options  KTRACE   #ktrace(1) support
> options  SYSVSHM   #SYSV-style shared memory
> options  SYSVMSG   #SYSV-style message queues
> options  SYSVSEM   #SYSV-style semaphores
> options  P1003_1B  #Posix P1003_1B real-time extensions
> options  _KPOSIX_PRIORITY_SCHEDULING
> options  ICMP_BANDLIM  #Rate limit bad replies
> options  KBD_INSTALL_CDEV # install a CDEV entry in /dev
>
> # To make an SMP kernel, the next two are needed
> #options  SMP   # Symmetric MultiProcessor Kernel
> #options  APIC_IO   # Symmetric (APIC) I/O
>
> #Wine stuff
> options  USER_LDT
> options  SYSVSHM
> options  SYSVSEM
> options  SYSVMSG
>
> device  isa
> device  eisa
> device  pci
>
> # Floppy drives
> device  fdc0 at isa? port IO_FD1 irq 6 drq 2
> device  fd0 at fdc0 drive 0
> device  fd1 at fdc0 drive 1
> #
> # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
> # don't use the above line for fdc0 but the following one:
> #device  fdc0
>
> # ATA and ATAPI devices
> device  ata0 at isa? port IO_WD1 irq 14
> device  ata1 at isa? port IO_WD2 irq 15
> device  ata
> device  atadisk   # ATA disk drives
> device  atapicd   # ATAPI CDROM drives
> device  atapifd   # ATAPI floppy drives
> device  atapist   # ATAPI tape drives
> options  ATA_STATIC_ID  #Static device numbering
>
> # SCSI Controllers
> device  ahb  # EISA AHA1742 family
> device  ahc  # AHA2940 and onboard AIC7xxx devices
> device  amd  # AMD 53C974 (Tekram DC-390(T))
> device  isp  # Qlogic family
> device  ncr  # NCR/Symbios Logic
> device  sym  # NCR/Symbios Logic (newer chipsets)
> options  SYM_SETUP_LP_PROBE_MAP=0x40
>     # Allow ncr to attach legacy NCR devices when
>     # both sym and ncr are configured
>
> device  adv0 at isa?
> device  adw
> device  bt0 at isa?
> device  aha0 at isa?
> device  aic0 at isa?
>
> device  ncv  # NCR 53C500
> device  nsp  # Workbit Ninja SCSI-3
> device  stg  # TMC 18C30/18C50
>
> # SCSI peripherals
> device  scbus  # SCSI bus (required)
> device  da  # Direct Access (disks)
> device  sa  # Sequential Access (tape etc)
> device  cd  # CD
> device  pass  # Passthrough device (direct SCSI access)
>
> # RAID controllers interfaced to the SCSI subsystem
> device  asr  # DPT SmartRAID V, VI and Adaptec SCSI RAID
> device  dpt  # DPT Smartcache - See LINT for options!
> device  mly  # Mylex AcceleRAID/eXtremeRAID
>
> # RAID controllers
> device  aac  # Adaptec FSA RAID, Dell PERC2/PERC3
> device  ida  # Compaq Smart RAID
> device  amr  # AMI MegaRAID
> device  mlx  # Mylex DAC960 family
> device  twe  # 3ware Escalade
>
> # atkbdc0 controls both the keyboard and the PS/2 mouse
> device  atkbdc0 at isa? port IO_KBD
> device  atkbd0 at atkbdc? irq 1 flags 0x1
> device  psm0 at atkbdc? irq 12
>
> device  vga0 at isa?
>
> # splash screen/screen saver
> pseudo-device splash
>
> # syscons is the default console driver, resembling an SCO console
> device  sc0 at isa? flags 0x100
>
> # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
> #device  vt0 at isa?
> #options  XSERVER   # support for X server on a vt console
> #options  FAT_CURSOR  # start with block cursor
> # If you have a ThinkPAD, uncomment this along with the rest of the PCVT
> lines #options  PCVT_SCANSET=2  # IBM keyboards are non-std
>
> # Floating point support - do not disable.
> device  npx0 at nexus? port IO_NPX irq 13
>
> # Power management support (see LINT for more options)
> device  apm0    at nexus? disable flags 0x20 # Advanced Power Management
>
> # PCCARD (PCMCIA) support
> device  card
> device  pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
> device  pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
>
> # Serial (COM) ports
> device  sio0 at isa? port IO_COM1 flags 0x10 irq 4
> device  sio1 at isa? port IO_COM2 irq 3
> device  sio2 at isa? disable port IO_COM3 irq 5
> device  sio3 at isa? disable port IO_COM4 irq 9
>
> # Parallel port
> device  ppc0 at isa? irq 7
> device  ppbus  # Parallel port bus (required)
> device  lpt0  # Printer
> device  plip  # TCP/IP over parallel
> device  ppi  # Parallel port interface device
> device  vpo  # Requires scbus and da
>
>
> # PCI Ethernet NICs.
> device  de  # DEC/Intel DC21x4x (``Tulip'')
> device  txp  # 3Com 3cR990 (``Typhoon'')
> device  vx  # 3Com 3c590, 3c595 (``Vortex'')
>
> # PCI Ethernet NICs that use the common MII bus controller code.
> # NOTE: Be sure to keep the 'device miibus' line in order to use these
> NICs! device  miibus  # MII bus support
> device  dc  # DEC/Intel 21143 and various workalikes
> device  fxp  # Intel EtherExpress PRO/100B (82557, 82558)
> device  pcn  # AMD Am79C97x PCI 10/100 NICs
> device  rl  # RealTek 8129/8139
> device  sf  # Adaptec AIC-6915 (``Starfire'')
> device  sis  # Silicon Integrated Systems SiS 900/SiS 7016
> device  ste  # Sundance ST201 (D-Link DFE-550TX)
> device  tl  # Texas Instruments ThunderLAN
> device  tx  # SMC EtherPower II (83c170 ``EPIC'')
> device  vr  # VIA Rhine, Rhine II
> device  wb  # Winbond W89C840F
> device  wx  # Intel Gigabit Ethernet Card (``Wiseman'')
> device  xl  # 3Com 3c90x (``Boomerang'', ``Cyclone'')
>
> # ISA Ethernet NICs.
> # 'device ed' requires 'device miibus'
> device  ed0 at isa? port 0x280 irq 10 iomem 0xd8000
> device  ex
> device  ep
> device  fe0 at isa? port 0x300
> # Xircom Ethernet
> device  xe
> # PRISM I IEEE 802.11b wireless NIC.
> device  awi
> # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
> # exists only as a PCMCIA device, so there is no ISA attachment needed
> # and resources will always be dynamically assigned by the pccard code.
> device  wi
> # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
> # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
> # mode (the factory default). If you set the switches on your ISA
> # card for a manually chosen I/O address and IRQ, you must specify
> # those parameters here.
> device  an
> # The probe order of these is presently determined by
> i386/isa/isa_compat.c. device  ie0 at isa? port 0x300 irq 10 iomem 0xd0000
> #device  le0 at isa? port 0x300 irq 5 iomem 0xd0000
> device  lnc0 at isa? port 0x280 irq 10 drq 0
> device  cs0 at isa? port 0x300
> device  sn0 at isa? port 0x300 irq 10
>
> # Pseudo devices - the number indicates how many units to allocate.
> pseudo-device loop  # Network loopback
> pseudo-device ether  # Ethernet support
> pseudo-device sl 1 # Kernel SLIP
> pseudo-device ppp 1 # Kernel PPP
> pseudo-device tun  # Packet tunnel.
> pseudo-device pty  # Pseudo-ttys (telnet etc)
> pseudo-device md  # Memory "disks"
> pseudo-device gif  # IPv6 and IPv4 tunneling
> pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
>
> # The `bpf' pseudo-device enables the Berkeley Packet Filter.
> # Be aware of the administrative consequences of enabling this!
> pseudo-device bpf  #Berkeley packet filter
>
> # USB support
> device  uhci  # UHCI PCI->USB interface
> device  ohci  # OHCI PCI->USB interface
> device  usb  # USB Bus (required)
> device  ugen  # Generic
> device  uhid  # "Human Interface Devices"
> device  ukbd  # Keyboard
> device  ulpt  # Printer
> device  umass  # Disks/Mass storage - Requires scbus and da
> device  ums  # Mouse
> device  uscanner # Scanners
> # USB Ethernet, requires mii
> device  aue  # ADMtek USB ethernet
> device  cue  # CATC USB ethernet
> device  kue  # Kawasaki LSI USB ethernet
>
> #Sound Card
> device pcm

-------------------------------------------------------

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020210081529.761CD51B>