Date: Tue, 26 Jun 2012 06:02:28 GMT From: svn-freebsd-gecko@chruetertee.ch To: freebsd-gecko@freebsd.org Subject: [SVN-Commit] r805 - in branches/experimental: . Mk www/firefox-nightly Message-ID: <201206260602.q5Q62Sa8008162@trillian.chruetertee.ch>
next in thread | raw e-mail | index | archive | help
Author: jbeich
Date: Tue Jun 26 06:02:28 2012
New Revision: 805
Log:
prune more unused files
Deleted:
branches/experimental/Mk/bsd.port.mk
branches/experimental/TODO
branches/experimental/www/firefox-nightly/Makefile.webplugins
Deleted: branches/experimental/Mk/bsd.port.mk
==============================================================================
--- branches/experimental/Mk/bsd.port.mk Tue Jun 26 06:02:28 2012 (r804)
+++ /dev/null 00:00:00 1970 (deleted)
@@ -1,6343 +0,0 @@
-#-*- mode: makefile; tab-width: 4; -*-
-# ex:ts=4
-#
-# $FreeBSD: ports/Mk/bsd.port.mk,v 1.708 2012/03/13 08:14:45 zi Exp $
-# $NetBSD: $
-#
-# bsd.port.mk - 940820 Jordan K. Hubbard.
-# This file is in the public domain.
-#
-# Please view me with 4 column tabs!
-
-# This is the master file for the most common elements to all port
-# Makefile in the ports system. For a more general overview of its
-# use and importance, see the Porter's Handbook.
-
-# There are two different types of "maintainers" in the ports framework.
-# The maintainer alias of the bsd.port.mk file is listed below in the
-# FreeBSD_MAINTAINER entry. You should consult them if you have any
-# questions/suggestions regarding this file.
-#
-# DO NOT COMMIT CHANGES TO THIS FILE BY YOURSELF, EVEN IF YOU DID NOT GET
-# A RESPONSE FROM THE MAINTAINER(S) WITHIN A REASONABLE TIMEFRAME! ALL
-# UNAUTHORISED CHANGES WILL BE UNCONDITIONALLY REVERTED!
-
-FreeBSD_MAINTAINER= portmgr@FreeBSD.org
-
-# For each port, the MAINTAINER variable is what you should consult for
-# contact information on the person(s) to contact if you have questions/
-# suggestions about that specific port. By default (if no MAINTAINER
-# is listed), a port is maintained by the subscribers of the ports@FreeBSD.org
-# mailing list, and any correspondence should be directed there.
-#
-# MAINTAINER - The e-mail address of the contact person for this port.
-# Default: ports@FreeBSD.org
-#
-# These are meta-variables that are automatically set to the system
-# you are running on. These are provided in case you need to take
-# different actions for different values.
-#
-# ARCH - The architecture of the target machine, such as would be
-# returned by "uname -p". (Note: Ports should test against
-# ARCH, and not the host machine's architecture which is
-# MACHINE_ARCH, to enable ports to be cross-built.)
-# OPSYS - Portability clause. This is the operating system the
-# makefile is being used on. Automatically set to
-# "FreeBSD," "NetBSD," or "OpenBSD" as appropriate.
-# OSREL - The release version (numeric) of the operating system.
-# OSVERSION - The value of __FreeBSD_version.
-#
-# This is the beginning of the list of all variables that need to be
-# defined in a port, listed in order that they should be included
-# to fit in with existing conventions. (Exception: MAINTAINER actually
-# should appear after EXTRACT_ONLY and before MASTER_SITE_BACKUP).
-#
-# These variables are used to identify your port.
-#
-# PORTNAME - Name of software. Mandatory.
-# PORTVERSION - Version of software. Mandatory when no DISTVERSION is given.
-# PORTREVISION - Version of port. Optional. Commonly used to indicate
-# that an update has happened that affects the port
-# framework itself, but not the distributed software
-# (e.g., local patches or Makefile changes).
-# PORTEPOCH - Optional. In certain odd cases, the PORTREVISION logic
-# can be fooled by ports that appear to go backwards
-# numerically (e.g. if port-0.3 is newer than port-1998).
-# In this case, incrementing PORTEPOCH forces the revision.
-# Default: 0 (no effect).
-# PKGNAME - Always defined as
-# ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PORTVERSION}.
-# Do not define this in your Makefile.
-# PKGNAMEPREFIX - Prefix to specify that port is language-specific, etc.
-# Optional.
-# PKGNAMESUFFIX - Suffix to specify compilation options. Optional.
-# PKGVERSION - Always defined as
-# ${PORTVERSION}.
-# Do not define this in your Makefile.
-# UNIQUENAME - A name for your port that is globally unique. By default,
-# this is set to ${LATEST_LINK} when LATEST_LINK is set,
-# and to ${PKGNAMEPREFIX}${PORTNAME} otherwise.
-# DISTVERSION - Vendor version of the distribution.
-# Default: ${PORTVERSION}
-# DISTNAME - Name of port or distribution used in generating
-# WRKSRC and DISTFILES below.
-# Default:
-# ${PORTNAME}-${DISTVERSIONPREFIX}${DISTVERSION}${DISTVERSIONSUFFIX}
-# CATEGORIES - A list of descriptive categories into which this port falls.
-# Mandatory.
-#
-# These variable describe how to fetch files required for building the port.
-#
-# DISTFILES - Name(s) of archive file(s) containing distribution.
-# Set this to an empty string if the port doesn't require it.
-# Default: ${DISTNAME}${EXTRACT_SUFX}
-# EXTRACT_SUFX - Suffix for archive names
-# You never have to set both DISTFILES and EXTRACT_SUFX.
-# Default: .tar.bz2 if USE_BZIP2 is set, .zip if USE_ZIP is
-# set, .tar.xz if USE_XZ is set, .run if USE_MAKESELF is set,
-# .tar.gz otherwise).
-# MASTER_SITES - Primary location(s) for distribution files if not found
-# locally. See bsd.sites.mk for common choices for
-# MASTER_SITES.
-# MASTER_SITE_SUBDIR
-# - Subdirectory of MASTER_SITES. Will sometimes need to be
-# set to ${PORTNAME} for (e.g.) MASTER_SITE_SOURCEFORGE.
-# Only guaranteed to work for choices of ${MASTER_SITES}
-# defined in bsd.sites.mk.
-# Default: not set.
-# PATCHFILES - Name(s) of additional files that contain distribution
-# patches. Make will look for them at PATCH_SITES (see below).
-# They will automatically be uncompressed before patching if
-# the names end with ".gz", ".bz2" or ".Z".
-# Default: not set.
-# PATCH_SITES - Primary location(s) for distribution patch files
-# if not found locally.
-# DIST_SUBDIR - Suffix to ${DISTDIR}. If set, all ${DISTFILES} and
-# ${PATCHFILES} will be put in this subdirectory of
-# ${DISTDIR} (see below). Also they will be fetched in this
-# subdirectory from FreeBSD mirror sites.
-# ALLFILES - All of ${DISTFILES} and ${PATCHFILES}.
-# IGNOREFILES - If set, don't perform checksum checks on these files.
-# NOFETCHFILES - If set, don't download these files from the ${MASTER_SITES}
-# or ${MASTER_SITE_BACKUP} (but do from
-# ${MASTER_SITE_OVERRIDE})
-# EXTRACT_ONLY - If set, a subset of ${DISTFILES} you want to
-# actually extract.
-# ALWAYS_KEEP_DISTFILES
-# - If set, the package building cluster will save the distfiles
-# along with the packages. This may be required to comply with
-# some licenses, e.g. GPL in some cases.
-# Default: not set.
-#
-# (NOTE: by convention, the MAINTAINER entry (see above) should go here.)
-#
-# These variables are typically set in /etc/make.conf to indicate
-# the user's preferred location to fetch files from. You should
-# rarely need to set these.
-#
-# MASTER_SITE_BACKUP
-# - Backup location(s) for distribution files and patch
-# files if not found locally and ${MASTER_SITES}/${PATCH_SITES}
-# Default:
-# ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/
-# MASTER_SITE_OVERRIDE
-# - If set, override the MASTER_SITES setting with this
-# value.
-# MASTER_SITE_FREEBSD
-# - If set, only use ${MASTER_SITE_BACKUP} for
-# MASTER_SITES.
-# CD_MOUNTPTS - List of CDROM mountpoints to look for distfiles under.
-# This variable supercedes CD_MOUNTPT, which is
-# obsolete.
-#
-# Set these if your port should not be built under certain circumstances.
-# These are string variables; you should set them to the reason why
-# they are necessary.
-#
-# RESTRICTED - Prevent the distribution of distfiles and packages to
-# the FTP sites or on CDROM (e.g. forbidden by license
-# considerations).
-# NO_CDROM - Packages and distfiles may not go on CDROM (e.g. must
-# not be re-sold) but can go on FTP sites.
-# NO_PACKAGE - Port should not be packaged for ftp sites or CDROMs,
-# but distfiles can be put on ftp sites and CDROMs.
-# FORBIDDEN - Package build should not be attempted because of
-# security vulnerabilities.
-# IGNORE - Package build should be skipped entirely (e.g.
-# because of serious unfixable problems in the build,
-# because it cannot be manually fetched, etc). Error
-# logs will not appear on pointyhat, so this should be
-# used sparingly.
-# BROKEN - Port is believed to be broken. Package builds will
-# still be attempted on the pointyhat package cluster to
-# test this assumption.
-# DEPRECATED - Port is deprecated to install. Advisory only.
-# EXPIRATION_DATE
-# - If DEPRECATED is set, determines a date when
-# the port is planed to remove. The date format is
-# ISO 8601 (YYYY-MM-DD).
-#
-# DISABLE_VULNERABILITIES
-# - If set, do not check if the port is listed in the
-# vulnerabilities database.
-#
-# In addition to RESTRICTED or NO_CDROM, if only a subset of distfiles
-# or patchfiles have redistribution restrictions, set the following
-# to the list of such files.
-#
-# RESTRICTED_FILES
-# - List of files that cannot be redistributed.
-# Default: "${DISTFILES} ${PATCHFILES}" if RESTRICTED
-# or NO_CDROM is set, empty otherwise.
-#
-# These variables are booleans, so you don't need to set them to the reason.
-#
-# IS_INTERACTIVE
-# - Set this if your port needs to interact with the user
-# during any step in a package build. User can then decide
-# to skip this port by setting ${BATCH}, or compiling only
-# the interactive ports by setting ${INTERACTIVE}.
-# Default: not set.
-# USE_SUBMAKE - Set this if you want that each of the port's main 6 targets
-# (extract, patch, configure, build, install and package) to be
-# executed in a separate make(1) process. Useful when one of
-# the stages needs to influence make(1) variables of the later
-# stages using ${WRKDIR}/Makefile.inc generated on the fly.
-# Default: not set.
-#
-# Set these if your port only makes sense to certain architectures.
-# They are lists containing names for them (e.g., "alpha i386").
-# (Defaults: not set.)
-#
-# ONLY_FOR_ARCHS
-# - Only build ports if ${ARCH} matches one of these.
-# NOT_FOR_ARCHS - Only build ports if ${ARCH} doesn't match one of these.
-# ONLY_FOR_ARCHS_REASON
-# ONLY_FOR_ARCHS_REASON_${ARCH}
-# - Reason why it's only for ${ONLY_FOR_ARCHS}s
-# NOT_FOR_ARCHS_REASON
-# NOT_FOR_ARCHS_REASON_${ARCH}
-# - Reason why it's not for ${NOT_FOR_ARCHS}s
-# IA32_BINARY_PORT
-# - Set this instead of ONLY_FOR_ARCHS if the given port
-# fetches and installs compiled i386 binaries.
-#
-# Dependency checking. Use these if your port requires another port
-# not in the list below. (Default: empty.)
-#
-# EXTRACT_DEPENDS
-# - A list of "path:dir[:target]" tuples of other ports this
-# package depends on in the "extract" stage. "path" is
-# the name of a file if it starts with a slash (/), an
-# executable otherwise. make will test for the existence
-# (if it is a full pathname) or search for it in your
-# $PATH (if it is an executable) and go into "dir" to do
-# a "make all install" if it's not found. If the third
-# field ("target") exists, it will be used instead of
-# ${DEPENDS_TARGET}.
-# PATCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
-# package depends on in the "patch" stage. "path" is the
-# name of a file if it starts with a slash (/), an
-# executable otherwise. make will test for the existence
-# (if it is a full pathname) or search for it in your
-# $PATH (if it is an executable) and go into "dir" to do
-# a "make all install" if it's not found. If the third
-# field ("target") exists, it will be used instead of
-# ${DEPENDS_TARGET}.
-# FETCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
-# package depends in the "fetch" stage. "path" is the
-# name of a file if it starts with a slash (/), an
-# executable otherwise. make will test for the
-# existence (if it is a full pathname) or search for
-# it in your $PATH (if it is an executable) and go
-# into "dir" to do a "make all install" if it's not
-# found. If the third field ("target") exists, it will
-# be used instead of ${DEPENDS_TARGET}.
-# BUILD_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
-# package depends to build (between the "extract" and
-# "build" stages, inclusive). The test done to
-# determine the existence of the dependency is the
-# same as FETCH_DEPENDS. If the third field ("target")
-# exists, it will be used instead of ${DEPENDS_TARGET}.
-# RUN_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
-# package depends to run. The test done to determine
-# the existence of the dependency is the same as
-# FETCH_DEPENDS. This will be checked during the
-# "install" stage and the name of the dependency will
-# be put into the package as well. If the third field
-# ("target") exists, it will be used instead of
-# ${DEPENDS_TARGET}.
-# LIB_DEPENDS - A list of "lib:dir[:target]" tuples of other ports this
-# package depends on. "lib" is the name of a shared library.
-# make will use "ldconfig -r" to search for the library.
-# lib can contain extended regular expressions.
-# DEPENDS_TARGET
-# - The default target to execute when a port is calling a
-# dependency.
-# Default: install
-#
-# These variables control options about how a port gets built and/or
-# are shorthand notations for common sets of dependencies.
-# Use these if your port uses some of the common software packages. By
-# convention these should be set to 'yes', although they only need to be
-# defined. Defaults: not set, unless explicitly indicated below.
-#
-# Note: the distinction between the USE_* and WANT_* variables, and the
-# WITH_* and WITHOUT_* variables, are that the former are restricted to
-# usage inside the ports framework, and the latter are reserved for user-
-# settable options. (Setting USE_* in /etc/make.conf is always wrong).
-#
-# WITH_DEBUG - If set, debugging flags are added to CFLAGS and the
-# binaries don't get stripped by INSTALL_PROGRAM or
-# INSTALL_LIB. Besides, individual ports might
-# add their specific to produce binaries for debugging
-# purposes. You can override the debug flags that are
-# passed to the compiler by setting DEBUG_FLAGS. It is
-# set to "-g" at default.
-#
-# USE_BZIP2 - If set, this port tarballs use bzip2, not gzip, for
-# compression.
-# USE_XZ - If set, this port tarballs use xz (or lzma)
-# for compression
-# USE_ZIP - If set, this port distfile uses zip, not tar w/[bg]zip
-# for compression.
-# USE_MAKESELF - If set, this port distfile uses makeself, not tar w/[bg]zip
-# for compression.
-# USE_DOS2UNIX - If set to "YES", remove the ^M from all files
-# under ${WRKSRC}. If set to a string, remove in all
-# files under ${WRKSRC} with one of these names the ^Ms.
-# DOS2UNIX_REGEX
-# - Limit the ^M removal to files which name matches
-# the regular expression.
-# USE_GCC - If set, this port requires this version of gcc, either in
-# the system or installed from a port.
-# USE_CSTD - Override the default C language standard (gnu89, gnu99)
-# USE_BINUTILS - Use binutils suite from port instead of the version in base.
-# USE_GMAKE - If set, this port uses gmake.
-# GMAKE - Set to path of GNU make if not in $PATH.
-# Default: gmake
-##
-# USE_ICONV - If set, this port uses libiconv.
-# USE_GETTEXT - The port uses GNU gettext (libintl).
-# 'build' as a build-time dependency
-# 'yes' as a library dependency
-# 'run' as a run-time dependency
-##
-# USE_GHOSTSCRIPT
-# - If set, this port needs ghostscript to both
-# build and run. If a number is specified,
-# the specified version will be used.
-# The valid value is '7', '8', or '9' in that case.
-# USE_GHOSTSCRIPT_BUILD
-# - If set, this port needs ghostscript to build.
-# USE_GHOSTSCRIPT_RUN
-# - If set, this port needs ghostscript to run.
-# GHOSTSCRIPT_PORT
-# - The port that provides postscript functionality.
-# Some installations may wish to override the default
-# to specify a version without X11 and/or localized
-# versions for their nationality.
-# Default: print/ghostscript9
-# WITH_GHOSTSCRIPT_VER
-# - If set, the specified version of ghostscript will be
-# used. The valid value is "7", "8", or "9". Note that
-# this is for users, not for port maintainers. This
-# should not be used in Makefile.
-##
-# USE_BISON - Implies that the port uses bison in one way or another:
-# 'build', 'run', 'both', implying build,
-# runtime, and both build/run dependencies
-##
-# USE_IMAKE - If set, this port uses imake.
-# XMKMF - Set to path of `xmkmf' if not in $PATH
-# Default: xmkmf -a
-# USE_XLIB - If set, this port uses the X libraries. In the USE_LINUX
-# case the linux X libraries are referenced.
-# USE_DISPLAY - If set, this ports requires a (virtual) X11 environment
-# setup. If the environment variable DISPLAY Is not set,
-# then an extra build dependency on Xvfb is added. Further,
-# if PACKAGE_BUILDING is not set, then CONFIGURE_ENV and
-# MAKE_ENV are extended with a DISPLAY variable.
-#
-# USE_FREETYPE - If set, this port uses the freetype print libraries.
-# USE_GL - A list of Mesa or GL related dependencies needed by the port.
-# Supported components are: glut, glu, glw, gl and linux.
-# If set to "yes", this is equivalent to "glu". Note that
-# glew and glut depend on glu, glw and glu depend on gl.
-# USE_MOTIF - If set, this port uses a Motif toolkit. Implies USE_XORG+= xpm
-# NO_OPENMOTIF - If set, this port uses a custom Motif toolkit
-# instead of Openmotif.
-# Used only when USE_MOTIF is set.
-# WANT_LESSTIF - If set, this port uses Lesstif as Motif toolkit.
-# Used only when USE_MOTIF is set. Implies
-# NO_OPENMOTIF.
-##
-# USE_SDL - If set, this port uses the sdl libraries.
-# See bsd.sdl.mk for more information.
-##
-# USE_OPENAL - If set, this port relies on the OpenAL package.
-# Legal values are: al, soft, si, alut.
-# If set to an unknown value, the port is marked broken.
-# WANT_OPENAL - User-specific OpenAL wishes.
-# Legal values are: soft, si. The default is soft.
-##
-# USE_OPENSSL - If set, this port relies on the OpenSSL package.
-##
-# USE_OPENLDAP - If set, this port uses the OpenLDAP libraries.
-# Implies: WANT_OPENLDAP_VER?=24
-# WANT_OPENLDAP_VER
-# - Legal values are: 23, 24
-# If set to an unknown value, the port is marked BROKEN.
-# WANT_OPENLDAP_SASL
-# - If set, the system should use OpenLDAP libraries
-# with SASL support.
-##
-# USE_FAM - If set, this port uses the File Alteration Monitor.
-#
-# WANT_FAM_SYSTEM
-# - Legal values are: gamin (default),fam
-# If set to an unknown value, the port is marked IGNORE.
-##
-# USE_AUTOTOOLS - If set, this port uses various GNU autotools
-# (libtool, autoconf, autoheader, automake et al.)
-# See bsd.autotools.mk for more details.
-##
-# USE_SCONS - If set, this port uses the Python-based SCons build system
-# See bsd.scons.mk for more details.
-##
-# USE_EFL - If set, this port use EFL libraries.
-# Implies inclusion of bsd.efl.mk. (Also see
-# that file for more information on USE_EFL_*).
-# USE_FPC - If set, this port relies on the Free Pascal language.
-# Implies inclusion of bsd.fpc.mk. (Also see
-# that file for more information on WANT_FPC_*).
-# USE_JAVA - If set, this port relies on the Java language.
-# Implies inclusion of bsd.java.mk. (Also see
-# that file for more information on USE_JAVA_*).
-# USE_OCAML - If set, this port relies on the OCaml language.
-# Implies inclusion of bsd.ocaml.mk. (Also see
-# that file for more information on USE_OCAML*).
-# USE_PYTHON - If set, this port relies on the Python language.
-# Implies inclusion of bsd.python.mk. (Also see
-# that file for more information on USE_PYTHON_*
-# and USE_PYDISTUTILS).
-# USE_R_MOD - If set, this port uses the Comprehensive R Archive Network.
-# See bsd.cran.mk for more details.
-# USE_RUBY - If set, this port relies on the Ruby language.
-# Implies inclusion of bsd.ruby.mk. (Also see
-# that file for more information on USE_RUBY_*).
-# USE_GNUSTEP - If set, this port relies on the GNUstep system.
-# Implies the inclusion of bsd.gnustep.mk.
-# (Also see that file for more information on
-# USE_GNUSTEP_*).
-##
-# USE_GECKO - If set, this port uses the Gecko/Mozilla product.
-# See bsd.gecko.mk for more details.
-##
-# USE_GNOME - A list of the Gnome dependencies the port has (e.g.,
-# glib12, gtk12). Implies that the port needs Gnome.
-# Implies inclusion of bsd.gnome.mk. See bsd.gnome.mk
-# or http://www.FreeBSD.org/gnome/docs/porting.html
-# for more details.
-##
-# USE_LUA - If set, this port uses the Lua library and related
-# components. See bsd.lua.mk for more details.
-##
-# USE_WX - If set, this port uses the WxWidgets library and related
-# components. See bsd.wx.mk for more details.
-##
-# USE_KDEBASE_VER - Set to 3 to use the KDE windowing system.
-# Implies inclusion of bsd.kde.mk.
-#
-# USE_KDELIBS_VER - Set to 3 to use the KDE libraries.
-# Implies inclusion of bsd.kde.mk.
-#
-# USE_KDE4 - A list of the KDE4 dependencies the port has (e.g.,
-# kdelibs, kdebase). Implies that the port needs KDE.
-# Implies inclusion of bsd.kde4.mk. See bsd.kde4.mk
-# for more details.
-#
-# USE_QT_VER - Set to 3 or 4 to use the respective version
-# of the QT libraries.
-# Implies inclusion of bsd.kde.mk.
-#
-# USE_LINUX - Set to yes to say the port needs the default linux base port.
-# Set to value <X>, if the port needs emulators/linux_base-<X>.
-# If set to "7", a dependency is registered to emulators/linux_base.
-# Implies appropriate settings for STRIP and STRIP_CMD.
-# USE_LINUX_PREFIX
-# - controls the action of PREFIX (see above). Only use this
-# if the port is a linux infrastructure port (e.g. contains libs
-# or a sound server which supports the FreeBSD native one),
-# use the default or the X11 prefix if it's a leaf port
-# (e.g. a game or program).
-# Implies NO_MTREE=yes, and, if USE_LDCONFIG is defined:
-# - USE_LINUX=yes
-# - appropriate invocation of the Linux ldconfig
-# USE_LINUX_RPM - Set to yes to pull in variables and targets useful to Linux
-# RPM ports.
-# Implies inclusion of bsd.linux-rpm.mk.
-#
-# LINUX_OSRELEASE - Contains the value of compat.linux.osrelease sysctl.
-# Will be used to distinguish which linux
-# infrastructure ports should be used.
-# Valid values: 2.4.2, 2.6.16.
-# AUTOMATIC_PLIST
-# - Set to yes to enable automatic packing list generation.
-# Currently has no effect unless USE_LINUX_RPM is set.
-#
-# OVERRIDE_LINUX_BASE_PORT
-# - This specifies the default linux base to use, for valid
-# values have a look at the description of USE_LINUX. This is
-# an user-only variable. Don't use it in any port, it's meant
-# to be used in make.conf.
-#
-# LINUX_BASE_PORT
-# - This is a read-only variable, it gets set to a value which is
-# usable in *_DEPENDS (e.g. BUILD_DEPENDS=${LINUX_BASE_PORT}).
-# It honors USE_LINUX=foo and OVERRIDE_LINUX_BASE_PORT.
-##
-# USE_XORG - Set to a list of X.org module dependencies.
-# Implies inclusion of bsd.xorg.mk.
-##
-# USE_RC_SUBR - If set, the ports startup/shutdown script uses the common
-# routines found in /etc/rc.subr.
-# If this is set to a list of files, these files will be
-# automatically added to ${SUB_FILES}, some %%VAR%%'s will
-# automatically be expanded, they will be installed in
-# ${PREFIX}/etc/rc.d and added to the packing list.
-# USE_RCORDER - List of rc.d startup scripts to be called early in the boot
-# process. This acts exactly like USE_RC_SUBR except that
-# scripts are installed in /etc/rc.d.
-# Because local rc.d scripts are included in the base rcorder
-# this option is not needed unless the port installs in the base.
-##
-# USE_APACHE - If set, this port relies on an apache webserver.
-#
-# USE_CDRTOOLS - If set, this port depends on sysutils/cdrtools.
-#
-# USE_NCURSES - If set, this port relies on the ncurses package.
-#
-# Conflict checking. Use if your port cannot be installed at the same time as
-# another package.
-#
-# CONFLICTS - A list of package name patterns that the port conflicts
-# with, separated by blanks. The names may include shell
-# pattern meta-characters "*", "?", "[", "]", and "!".
-# Example: apache*-1.2* apache*-1.3.[012345] apache-*+ssl_*
-#
-# CONFLICTS_BUILD
-# - Check conflict prior to the build.
-#
-# CONFLICTS_INSTALL
-# - Check conflict prior to the installation stage.
-#
-# Various directory definitions and variables to control them.
-# You rarely need to redefine any of these except WRKSRC and NO_WRKSUBDIR.
-#
-# LOCALBASE - Where non-X11 ports install things.
-# Default: /usr/local
-# LINUXBASE - Where Linux ports install things.
-# Default: /compat/linux
-# PREFIX - Where *this* port installs its files.
-# Default: ${LINUXBASE} if USE_LINUX_PREFIX is set,
-# otherwise ${LOCALBASE}
-#
-# IGNORE_PATH_CHECKS
-# - There are some sanity checks against PREFIX.
-# You can disable these checks with defining
-# this variable, but this is not recommended!
-# Only do this if you really know what you are
-# doing. These sanity checks are the following:
-# - PREFIX has to be an absolute path.
-# - PREFIX can't have a trailing slash.
-#
-# MASTERDIR - Where the port finds patches, package files, etc. Define
-# this is you have two or more ports that share most of the
-# files.
-# Default: ${.CURDIR}
-# PORTSDIR - The root of the ports tree.
-# Default: /usr/ports
-# DISTDIR - Where to search for and store copies of original sources
-# Default: ${PORTSDIR}/distfiles
-# PACKAGES - A top level directory where all packages go (rather than
-# going locally to each port).
-# Default: ${PORTSDIR}/packages
-# WRKDIRPREFIX - The place to root the temporary working directory
-# hierarchy.
-# Default: none
-# WRKDIR - A temporary working directory that gets *clobbered* on clean
-# Default: ${WRKDIRPREFIX}${.CURDIR}/work
-# WRKSRC - A subdirectory of ${WRKDIR} where the distribution actually
-# unpacks to.
-# Default: ${WRKDIR}/${DISTNAME} unless NO_WRKSUBDIR is set,
-# in which case simply ${WRKDIR}
-# NO_WRKSUBDIR - Assume port unpacks directly into ${WRKDIR}.
-# PATCHDIR - A directory containing any additional patches you made
-# to port this software to FreeBSD.
-# Default: ${MASTERDIR}/files
-# SCRIPTDIR - A directory containing any auxiliary scripts
-# Default: ${MASTERDIR}/scripts
-# FILESDIR - A directory containing any miscellaneous additional files.
-# Default: ${MASTERDIR}/files
-# PKGDIR - A directory containing any package creation files.
-# Default: ${MASTERDIR}
-# SRC_BASE - The root of the src tree. (Some ports require this to get
-# kernel sources). Default: /usr/src
-# UID_FILES - A list of files containing information about registered UIDs.
-# Note that files have decreasing priority.
-# GID_FILES - A list of files containing information about registered GIDs.
-# Note that files have decreasing priority.
-#
-# Variables that serve as convenient "aliases" for your *-install targets.
-# Use these like: "${INSTALL_PROGRAM} ${WRKSRC}/prog ${PREFIX}/bin".
-#
-# INSTALL_PROGRAM
-# - A command to install binary executables. (By
-# default, also strips them, unless ${STRIP} is
-# overridden to be the empty string).
-# INSTALL_KLD - As INSTALL_PROGRAM, but without the STRIP.
-# INSTALL_LIB - As INSTALL_DATA, but also strips the file.
-# INSTALL_SCRIPT
-# - A command to install executable scripts.
-# INSTALL_DATA - A command to install sharable data.
-# INSTALL_MAN - A command to install manpages. May or not compress,
-# depending on the value of MANCOMPRESSED (see below).
-#
-# Boolean to control whether manpages are installed.
-#
-# NO_INSTALL_MANPAGES
-# - If set, this port doesn't want to install any manpages.
-# Default: not set, i.e. manpages are installed by default.
-#
-# Set the following to specify all manpages that your port installs.
-# These manpages will be automatically listed in ${PLIST}. Depending
-# on the setting of NO_MANCOMPRESS, the make rules will compress the
-# manpages for you.
-#
-# MAN<sect> - A list of manpages, categorized by section. For
-# example, if your port has "man/man1/foo.1" and
-# "man/mann/bar.n", set "MAN1=foo.1" and "MANN=bar.n".
-# The available sections chars are "123456789LN".
-# MAN<sect>_<lang>
-# - If your port does not install all man pages for all
-# languages in MANLANG, language specific pages for
-# a language can be specified with this. For example,
-# if the port installs foo.1 in English, Japanese, and
-# German, bar.1 in English only, and baz.3 in German
-# only, set
-# MANLANG= "" de ja
-# MAN1= foo.1
-# MAN1_EN= bar.1
-# MAN3_DE= baz.3
-# MLINKS - A list of <source, target> tuples for creating links
-# for manpages. For example, "MLINKS= a.1 b.1 c.3 d.3"
-# will do an "ln -sf a.1 b.1" and "ln -sf c.3 d.3" in
-# appropriate directories. (Use this even if the port
-# installs its own manpage links so they will show up
-# correctly in ${PLIST}.)
-# MANPREFIX - The directory prefix for ${MAN<sect>} and ${MLINKS}.
-# Default: ${PREFIX}
-# MAN<sect>PREFIX
-# - If manual pages of some sections install in different
-# locations than others, use these.
-# Default: ${MANPREFIX}
-# MANCOMPRESSED - This variable can take values "yes", "no" or
-# "maybe". "yes" means manpages are installed
-# compressed; "no" means they are not; "maybe" means
-# it changes depending on the value of NO_MANCOMPRESS.
-# Default: "yes" if USE_IMAKE is set and NO_INSTALL_MANPAGES
-# is not set, and "no" otherwise.
-#
-# Set the following to specify all .info files your port installs.
-#
-# INFO - A list of .info files (omitting the trailing ".info");
-# only one entry per document! These files are listed in
-# the path relative to ${INFO_PATH}.
-# INFO_PATH - Path, where all .info files will be installed by your
-# port, relative to ${PREFIX}
-# Default: "share/info" if ${PREFIX} is equal to /usr
-# and "info" otherwise.
-#
-# Set the following to specify all documentation your port installs into
-# ${DOCSDIR}
-#
-# PORTDOCS - A list of files and directories relative to DOCSDIR.
-# Shell glob patterns can be used, directories include
-# the entire subtree of contained files and directories.
-# Should not be set when no documentation files are
-# installed.
-# Useful for dynamically generated documentation.
-#
-# Set the following to specify all documentation your port installs into
-# ${EXAMPLESDIR}
-#
-# PORTEXAMPLES - A list of files and directories relative to EXAMPLESDIR.
-# Shell glob patterns can be used, directories include
-# the entire subtree of contained files and directories.
-# Should not be set when no examples files are
-# installed.
-# Useful for dynamically generated examples.
-#
-# Set the following to specify all documentation your port installs into
-# ${DATADIR}
-#
-# PORTDATA - A list of files and directories relative to DATADIR.
-# Shell glob patterns can be used, directories include
-# the entire subtree of contained files and directories.
-# Should not be set when no data files are
-# installed.
-# Useful for dynamically generated data files.
-#
-# Default targets and their behaviors:
-#
-# fetch - Retrieves missing ${DISTFILES} and ${PATCHFILES} for this
-# port.
-# fetch-list - Show list of commands to retrieve missing ${DISTFILES} and
-# ${PATCHFILES} for this port.
-# fetch-recursive
-# - Retrieves missing ${DISTFILES} and ${PATCHFILES} for this
-# port and dependencies.
-# fetch-recursive-list
-# - Show list of commands to retrieve missing ${DISTFILES} and
-# ${PATCHFILES} for this port and dependencies.
-# fetch-required
-# - Retrieves missing ${DISTFILES} and ${PATCHFILES} for this
-# port and dependencies.
-# fetch-required-list
-# - Show list of commands to retrieve missing ${DISTFILES} and
-# ${PATCHFILES} for this port and dependencies.
-# fetch-url-list
-# - Show list of URLS to retrieve missing ${DISTFILES} and
-# ${PATCHFILES} for this port.
-# fetch-urlall-list
-# - Show list of URLS to retrieve ${DISTFILES} and
-# ${PATCHFILES} for this port.
-#
-# all-depends-list
-# - Show all directories which are dependencies
-# for this port.
-# build-depends-list
-# - Show all directories which are build-dependencies
-# for this port.
-# package-depends-list
-# - Show all directories which are package-dependencies
-# for this port. This is based upon the dependency
-# tree as recorded in the Makefiles of the ports
-# collection, not as recorded in the currently
-# installed ports.
-# actual-package-depends
-# - Like package-depends-list but with the difference
-# that the dependencies of the currently installed
-# ports are used instead of the dependencies as
-# recorded in the ports collection.
-# run-depends-list
-# - Show all directories which are run-dependencies
-# for this port.
-#
-# extract - Unpacks ${DISTFILES} into ${WRKDIR}.
-# patch - Apply any provided patches to the source.
-# configure - Runs either GNU configure, one or more local configure
-# scripts or nothing, depending on what's available.
-# build - Actually compile the sources.
-# install - Install the results of a build.
-# reinstall - Install the results of a build, ignoring "already installed"
-# flag.
-# deinstall - Remove the installation.
-# deinstall-all - Remove all installations with the same PKGORIGIN.
-# package - Create a package from an _installed_ port.
-# package-recursive
-# - Create a package for a port and _all_ of its dependencies.
-# describe - Try to generate a one-line description for each port for
-# use in INDEX files and the like.
-# checkpatch - Do a "patch -C" instead of a "patch". Note that it may
-# give incorrect results if multiple patches deal with
-# the same file.
-# checksum - Use distinfo to ensure that your distfiles are valid.
-# checksum-recursive
-# - Run checksum in this port and all dependencies.
-# makesum - Generate distinfo (only do this for your own ports!).
-# clean - Remove ${WRKDIR} and other temporary files used for building.
-# clean-depends - Do a "make clean" for all dependencies.
-# config - Configure options for this port (using ${DIALOG}).
-# Automatically run prior to extract, patch, configure, build,
-# install, and package.
-# config-recursive
-# - Configure options for this port for a port and all its
-# dependencies.
-# showconfig - Display options config for this port.
-# showconfig-recursive
-# - Display options config for this port and all its
-# dependencies.
-# rmconfig - Remove the options config for this port.
-# rmconfig-recursive
-# - Remove the options config for this port and all its
-# dependencies.
-#
-# Default sequence for "all" is:
-#
-# check-sanity fetch checksum extract patch configure build
-#
-# Please read the comments in the targets section below; you
-# should be able to use the pre-* or post-* targets/scripts
-# (which are available for every stage except checksum) or
-# override the do-* targets to do pretty much anything you want.
-#
-# NEVER override the "regular" targets unless you want to open
-# a major can of worms.
-#
-# Set these variables if your port doesn't need some of the steps.
-# Note that there are no NO_PATCH or NO_CONFIGURE variables because
-# those steps are empty by default. NO_EXTRACT is not allowed anymore
-# since we need to at least create ${WRKDIR}. Also, NO_CHECKSUM is a user
-# variable and is not to be set in a port's Makefile. See above for NO_PACKAGE.
-#
-# NO_BUILD - Use a dummy (do-nothing) build target.
-# NO_INSTALL - Use a dummy (do-nothing) install target.
-#
-# Here are some variables used in various stages.
-#
-# For options:
-# OPTIONS - List of what WITH_<option> options this port accept. The
-# format is <option> "<description>" [on|off]
-# Example:
-# FLEXRESP "Flexible response to events" off
-# which tell that an option WITH_FLEXRESP exists for this port,
-# that by default it is not defined, and that the description to
-# show to a user in the config dialog is "Flexible response to
-# events". If you have more than one option, just chain them
-# into a single variable. NOTE: To make options work, you need
-# to include bsd.port.pre.mk before you start testing the
-# WITH_xyz variables.
-#
-# For fetch:
-#
-# FETCH_BINARY - Path to ftp/http fetch command if not in $PATH.
-# Default: "/usr/bin/fetch"
-# FETCH_ARGS - Arguments to ftp/http fetch command.
-# Default: "-AFpr"
-# FETCH_CMD - ftp/http fetch command.
-# Default: ${FETCH_BINARY} ${FETCH_ARGS}
-# FETCH_BEFORE_ARGS
-# - Arguments to ${FETCH_CMD} before filename.
-# Default: none
-# FETCH_AFTER_ARGS
-# - Arguments to ${FETCH_CMD} following filename.
-# Default: none
-# FETCH_ENV - Environment to pass to ${FETCH_CMD}.
-# Default: none
-# FETCH_REGET - Times to retry fetching of files on checksum errors.
-# Default: 1
-#
-# For extract:
-#
-# EXTRACT_CMD - Command for extracting archive: "bzip2" if USE_BZIP2
-# is set, "unzip" if USE_ZIP is set, "unmakeself" if
-# USE_MAKESELF if set, "gzip" otherwise.
-# EXTRACT_BEFORE_ARGS
-# - Arguments to ${EXTRACT_CMD} before filename.
-# Default: "-dc"
-# EXTRACT_AFTER_ARGS
-# - Arguments to ${EXTRACT_CMD} following filename.
-# default: "| tar -xf -"
-# EXTRACT_PRESERVE_OWNERSHIP
-# - Normally, when run as "root", the extract stage will
-# change the owner and group of all files under ${WRKDIR}
-# to 0:0. Set this variable if you want to turn off this
-# feature.
-# For patch:
-#
-# EXTRA_PATCHES - Define this variable if you have patches not in
-# ${PATCHDIR}. This usually happens when you need to
-# do some pre-processing before some distribution
-# patches can be applied. In that case, fetch them as
-# extra distfiles, put the processed results in
-# ${WRKDIR}, then point EXTRA_PATCHES to them.
-# The patches specified by this variable will be
-# applied after the normal distribution patches but
-# before those in ${PATCHDIR}.
-# PATCH_WRKSRC - Directory to apply patches in.
-# Default: ${WRKSRC}
-#
-# For configure:
-#
-# HAS_CONFIGURE - If set, this port has its own configure script. The
-# configure stage will not do anything if this is not set.
-# GNU_CONFIGURE - If set, you are using GNU configure (optional). Implies
-# HAS_CONFIGURE.
-# CONFIGURE_WRKSRC
-# - Directory to run configure in.
-# Default: ${WRKSRC}
-# CONFIGURE_SCRIPT
-# - Name of configure script, relative to ${CONFIGURE_WRKSRC}.
-# Default: "Makefile.PL" if PERL_CONFIGURE is set,
-# "configure" otherwise.
-# CONFIGURE_TARGET
-# - The name of target to call when GNU_CONFIGURE is
-# defined.
-# Default: ${ARCH}-portbld-freebsd${OSREL}
-# GNU_CONFIGURE_PREFIX
-# - The directory passed as prefix to the configure script if
-# GNU_CONFIGURE is set.
-# Default: ${PREFIX}
-# CONFIGURE_ARGS
-# - Pass these args to configure if ${HAS_CONFIGURE} is set.
-# Default: "--prefix=${GNU_CONFIGURE_PREFIX} --infodir=${PREFIX}/${INFO_PATH}
-# --mandir=${MANPREFIX}/man --build=${CONFIGURE_TARGET}" if
-# GNU_CONFIGURE is set, "CC=${CC} CFLAGS=${CFLAGS}
-# PREFIX=${PREFIX} INSTALLPRIVLIB=${PREFIX}/lib
-# INSTALLARCHLIB=${PREFIX}/lib" if PERL_CONFIGURE is set,
-# empty otherwise.
-# CONFIGURE_ENV - Pass these env (shell-like) to configure if
-# ${HAS_CONFIGURE} is set.
-# CONFIGURE_LOG - The name of configure log file. It will be printed to
-# the screen if configure fails.
-# Default: config.log
-# CONFIGURE_FAIL_MESSAGE
-# - A message displayed to users when configure
-# fails (note: this assumes the do-configure
-# target has not been overwritten). This message
-# will be passed through /usr/bin/fmt before
-# being shown to the user.
-#
-# WITHOUT_FBSD10_FIX Disable FreeBSD 10.0 autotools workaround.
-#
-# For build and install:
-#
-# MAKEFILE - Name of the makefile.
-# Default: Makefile
-# ALL_TARGET - Default target for sub-make in build stage.
-# Default: all
-# BUILD_WRKSRC - Directory to do build in (default: ${WRKSRC}).
-# MAKE_ENV - Additional environment vars passed to sub-make in build
-# and install stages.
-# Default: see below
-# MAKE_ARGS - Any extra arguments to sub-make in build and install stages.
-# Default: none
-##
-# MAKE_JOBS_SAFE
-# - This port can safely be built on multiple cpus in parallel.
-# The make will be invoked with -jX parameter where X equals
-# number of cores present in the system.
-# MAKE_JOBS_UNSAFE
-# - Disallow multiple jobs even when user set a global override.
-# To be used with known bad ports.
-# DISABLE_MAKE_JOBS
-# - Set to disable the multiple jobs feature. User settable.
-# FORCE_MAKE_JOBS
-# - Force all ports to be built with multiple jobs, except ports
-# that are explicitly marked MAKE_JOBS_UNSAFE. User settable.
-# MAKE_JOBS_NUMBER
-# - Override the number of make jobs to be used. User settable.
-#
-# For install:
-#
-# INSTALL_TARGET
-# - Default target for sub-make in install stage.
-# Default: install
-# INSTALL_WRKSRC
-# - Directory to install from
-# Default: ${WRKSRC}
-# NO_MTREE - If set, will not invoke mtree from bsd.port.mk from
-# the "install" target.
-# MTREE_FILE - The name of the mtree file.
-# Default: ${PORTSDIR}/Templates/BSD.local.dist or
-# /etc/mtree/BSD.usr.dist if ${PREFIX} == "/usr".
-# PLIST_DIRS - Directories to be added to packing list
-# PLIST_DIRSTRY - Directories to be added to packing list and try to remove them.
-# PLIST_FILES - Files and symbolic links to be added to packing list
-#
-# PLIST - Name of the `packing list' file.
-# Change this to ${WRKDIR}/PLIST or something if you
-# need to write to it. (It is not a good idea for a port
-# to write to any file outside ${WRKDIR} during a normal
-# build.)
-# Default: ${PKGDIR}/pkg-plist
-# TMPPLIST - Name of the `packing list' file after processing
-# Default: ${WRKDIR}/.PLIST.mktmp
-# PLIST_SUB - List of "variable=value" pair for substitution in ${PLIST}
-# Default: see below
-#
-# SUB_FILES - Files that should be passed through sed and redirected to
-# ${WRKDIR}.
-# - For each file specified in SUB_FILES, there must be a
-# corresponding file in ${FILESDIR} whose suffix is ".in". For
-# instance, if the Makefile specifies "SUB_FILES= pkg-message"
-# then there must be a file called pkg-message.in in
-# ${FILESDIR}.
-# - The substitution process is the same as PLIST_FILES, as
-# described below except that any line beginning with @comment
-# is deleted.
-# SUB_LIST - List of "variable=value" pair for substitution in ${SUB_FILES}
-# Some pairs are added by default: eg. PREFIX=${PREFIX}
-#
-# USE_LDCONFIG - If set to "yes", this adds ${PREFIX}/lib to the list of
-# directories to be searched for shared libraries.
-# Otherwise, this is a list of directories to be added to that
-# list. The directory names are written to
-# ${PREFIX}/libdata/ldconfig/${UNIQUENAME} which is then
-# used by the ldconfig startup script.
-# This mechanism replaces ldconfig scripts installed by some
-# ports, often under such names as 000.${UNQUENAME}.sh.
-# If USE_LINUX_PREFIX is defined, the Linux version of
-# ldconfig will be used instead of the native FreeBSD
-# version, and the directory list given will be ignored.
-# USE_LDCONFIG32
-# - Same as USE_LDCONFIG but the target file is
-# ${PREFIX}/libdata/ldconfig32/${UNIQUENAME} instead.
-# Note: that should only be used on 64-bit architectures.
-# NO_LDCONFIG_MTREE
-# - Denotes whether the libdata/ldconfig directory is part of
-# the mtree on a given OSVERSION system. If it is not, we
-# create the directory, pull in the ldconfig_compat port,
-# and clean up on de-installation. NOTE: this variable is
-# internal to bsd.port.mk and must not be set in your Makefile.
-#
-# DOCSDIR - Name of the directory to install the packages docs in.
-# Default: ${PREFIX}/share/doc/${PORTNAME}
-# DOCSDIR_REL - The DOCSDIR relative to ${PREFIX}
-# EXAMPLESDIR - Name of the directory to install the packages examples in.
-# Default: ${PREFIX}/share/examples/${PORTNAME}
-# EXAMPLESDIR_REL
-# - The EXAMPLESDIR relative to ${PREFIX}
-# DATADIR - Name of the directory to install the packages shared data in.
-# Default: ${PREFIX}/share/${PORTNAME}
-# DATADIR_REL - The DATADIR relative to ${PREFIX}
-#
-# WWWDIR - Name of the directory to install the packages www data in.
-# Default: ${PREFIX}/www/${PORTNAME}
-# WWWDIR_REL - The WWWDIR relative to ${PREFIX}
-#
-# USERS - List of users to create at install time. Each login must
-# have a corresponding entry in ${UID_FILES}.
-# GROUPS - List of groups to create at install time. Each group must
-# have a corresponding entry in ${GID_FILES}.
-#
-# DESKTOPDIR - Name of the directory to install ${DESKTOP_ENTRIES} in.
-# Default: ${PREFIX}/share/applications
-# DESKTOP_ENTRIES
-# - List of desktop entry files to generate and install in
-# ${DESKTOPDIR}. The format is
-# "Name" "Comment" "Icon" "Exec" "Categories" StartupNotify
-# Rules:
-# * Only add desktop entries for applications which do not
-# require a terminal (ie. X applications).
-# * If the upstream distribution already installs .desktop
-# files, you do not need to use this.
-# * If you require a more elaborate .desktop file than this
-# variable permits, write it yourself and install it
-# in ${DESKTOPDIR}.
-# Notes:
-# * Comment and Icon may be empty strings (""). Categories
-# may be an empty string in some cases (see below). The
-# other fields are mandatory.
-# * If Categories is an empty string, bsd.port.mk will try
-# to deduce a default value using the CATEGORIES variable.
-# If the deduction fails, you will have to set Categories
-# manually. You should check the generated value using
-# "make desktop-categories", and override it if necessary.
-# * Exec will also be used to name the .desktop file.
-# * The files will be automatically added to ${PLIST}.
-# Example:
-# "X Window Information" \
-# "Get information about X windows" \
-# "wininfo.png" \
-# "wininfo" \
-# "Application;System;" \
-# true
-# See http://standards.freedesktop.org/desktop-entry-spec/desktop-entry-spec-latest.html
-# for an explanation of the fields. If you need to create more
-# than one file, just chain them into a single variable.
-#
-# Note that the install target will automatically add manpages (see
-# above) and also substitute special sequences of characters (delimited
-# by "%%") as defined in PLIST_SUB to generate ${TMPPLIST}. For
-# instance, "OSREL=${OSREL}" in PLIST_SUB causes all occurrences of
-# "%%OSREL%%" in ${PLIST} to be substituted by the value of OSREL.
-# ${TMPPLIST} is generated before the do-install stage. If you are
-# generating the packing list on-the-fly, make sure it's generated before
-# do-install is called!
-#
-# For package:
-#
-# NO_LATEST_LINK
-# - Do not install the "Latest" link for package. Define this
-# if this port is a beta version of another stable port
-# which is also in the tree.
-# LATEST_LINK - Install the "Latest" link for the package as ___. Define
-# this if the "Latest" link name will be incorrectly determined.
-#
-# This is used in all stages:
-#
-# SCRIPTS_ENV - Additional environment vars passed to scripts in
-# ${SCRIPTDIR} executed by bsd.port.mk.
-# Default: see below
-#
-# Finally, variables to change if you want a special behavior. These
-# are for debugging purposes. Don't set them in your Makefile.
-#
-# ECHO_MSG - Used to print all the '===>' style prompts - override this
-# to turn them off.
-# Default: ${ECHO_CMD}
-# PATCH_DEBUG - If set, print out more information about the patches as
-# it attempts to apply them.
-# PKG_DBDIR - Where package installation is recorded; this directory
-# must not contain anything else.
-# Default: /var/db/pkg
-# PORT_DBDIR - Where port configuration options are recorded.
-# Default: /var/db/ports
-# NO_PKG_REGISTER
-# - Don't register a port installation as a package.
-# FORCE_PKG_REGISTER
-# - If set, it will overwrite any existing package
-# registration information in ${PKG_DBDIR}/${PKGNAME}.
-# NO_DEPENDS - Don't verify build of dependencies.
-# CHECKSUM_ALGORITHMS
-# - Different checksum algorithms to check for verifying the
-# integrity of the distfiles. The absence of the algorithm
-# in distinfo doesn't make it fail.
-# Default: sha256
-# NO_CHECKSUM - Don't verify the checksum. Typically used when
-# when you noticed the distfile you just fetched has
-# a different checksum and you intend to verify if
-# the port still works with it.
-# USE_PACKAGE_DEPENDS
-# - Install dependencies from existing packages instead
-# of building the port from scratch.
-# INSTALL_AS_USER
-# - Define this to install as the current user, intended
-# for systems where you have no root access.
-# DISABLE_SIZE - Do not check the size of a distfile even if the SIZE field
-# has been specified in distinfo. This is useful
-# when using an alternate FETCH_CMD.
-#
-# End of the list of all variables that need to be defined in a port.
-# Most port authors should not need to understand anything after this point.
-#
-
-# These need to be absolute since we don't know how deep in the ports
-# tree we are and thus can't go relative. They can, of course, be overridden
-# by individual Makefiles or local system make configuration.
-PORTSDIR?= /usr/ports
-LOCALBASE?= /usr/local
-LINUXBASE?= /compat/linux
-DISTDIR?= ${PORTSDIR}/distfiles
-_DISTDIR?= ${DISTDIR}/${DIST_SUBDIR}
-INDEXDIR?= ${PORTSDIR}
-SRC_BASE?= /usr/src
-
-.include "${PORTSDIR}/Mk/bsd.commands.mk"
-
-#
-# DESTDIR section to start a chrooted process if invoked with DESTDIR set
-#
-
-.if defined(DESTDIR) && !empty(DESTDIR) && !defined(CHROOTED) && \
- !defined(BEFOREPORTMK) && !defined(INOPTIONSMK)
-
-.include "${PORTSDIR}/Mk/bsd.destdir.mk"
-
-.else
-
-# Look for ${PATCH_WRKSRC}/.../*.orig files, and (re-)create
-# ${FILEDIR}/patch-* files from them.
-
-.if !target(makepatch)
-makepatch:
- @${MKDIR} ${FILESDIR}
- @(cd ${PATCH_WRKSRC}; \
- for i in `find . -type f -name '*.orig'`; do \
- ORG=$$i; \
- NEW=$${i%.orig}; \
- OUT=${FILESDIR}`${ECHO} $${NEW} | \
- ${SED} -e 's|/|__|g' \
- -e 's|^\.__|/patch-|'`; \
- ${ECHO} ${DIFF} -ud $${ORG} $${NEW} '>' $${OUT}; \
- ${DIFF} -ud $${ORG} $${NEW} > $${OUT} || ${TRUE}; \
- done \
- )
-.endif
-
-
-# Start of options section
-.if defined(INOPTIONSMK) || ( !defined(USEOPTIONSMK) && !defined(AFTERPORTMK) )
-
-
-# Get the default maintainer
-MAINTAINER?= ports@FreeBSD.org
-
-# Get the architecture
-.if !defined(ARCH)
-ARCH!= ${UNAME} -p
-.endif
-
-# Kludge for pre-3.0 systems
-MACHINE_ARCH?= i386
-
-# Get the operating system type
-.if !defined(OPSYS)
-OPSYS!= ${UNAME} -s
-.endif
-
-# Get the operating system revision
-.if !defined(OSREL)
-OSREL!= ${UNAME} -r | ${SED} -e 's/[-(].*//'
-.endif
-
-# Get __FreeBSD_version
-.if !defined(OSVERSION)
-.if exists(/usr/include/sys/param.h)
-OSVERSION!= ${AWK} '/^\#define[[:blank:]]__FreeBSD_version/ {print $$3}' < /usr/include/sys/param.h
-.elif exists(${SRC_BASE}/sys/sys/param.h)
-OSVERSION!= ${AWK} '/^\#define[[:blank:]]__FreeBSD_version/ {print $$3}' < ${SRC_BASE}/sys/sys/param.h
-.else
-OSVERSION!= ${SYSCTL} -n kern.osreldate
-.endif
-.endif
-
-MASTERDIR?= ${.CURDIR}
-
-.if ${MASTERDIR} != ${.CURDIR}
-SLAVE_PORT?= yes
-MASTER_PORT?=${MASTERDIR:C/[^\/]+\/\.\.\///:C/[^\/]+\/\.\.\///:C/^.*\/([^\/]+\/[^\/]+)$/\\1/}
-.else
-SLAVE_PORT?= no
-MASTER_PORT?=
-.endif
-
-# If they exist, include Makefile.inc, then architecture/operating
-# system specific Makefiles, then local Makefile.local.
-
-.if ${MASTERDIR} != ${.CURDIR} && exists(${.CURDIR}/../Makefile.inc)
-.include "${.CURDIR}/../Makefile.inc"
-USE_SUBMAKE= yes
-.endif
-
-.if exists(${MASTERDIR}/../Makefile.inc)
-.include "${MASTERDIR}/../Makefile.inc"
-USE_SUBMAKE= yes
-.endif
-
-.if exists(${MASTERDIR}/Makefile.${ARCH}-${OPSYS})
-.include "${MASTERDIR}/Makefile.${ARCH}-${OPSYS}"
-USE_SUBMAKE= yes
-.elif exists(${MASTERDIR}/Makefile.${OPSYS})
-.include "${MASTERDIR}/Makefile.${OPSYS}"
-USE_SUBMAKE= yes
-.elif exists(${MASTERDIR}/Makefile.${ARCH})
-.include "${MASTERDIR}/Makefile.${ARCH}"
-USE_SUBMAKE= yes
-.endif
-
-.if exists(${MASTERDIR}/Makefile.local)
-.include "${MASTERDIR}/Makefile.local"
-USE_SUBMAKE= yes
-.endif
-
-# where 'make config' records user configuration options
-PORT_DBDIR?= /var/db/ports
-
-UID_FILES?= ${PORTSDIR}/UIDs
-GID_FILES?= ${PORTSDIR}/GIDs
-UID_OFFSET?= 0
-GID_OFFSET?= 0
-
-# predefined accounts from src/etc/master.passwd
-# alpha numeric sort order
-USERS_BLACKLIST= _dhcp _pflogd bin bind daemon games kmem mailnull man news nobody operator pop proxy root smmsp sshd toor tty uucp www
-
-LDCONFIG_DIR= libdata/ldconfig
-LDCONFIG32_DIR= libdata/ldconfig32
-
-.if defined(LATEST_LINK)
-UNIQUENAME?= ${LATEST_LINK}
-.else
-UNIQUENAME?= ${PKGNAMEPREFIX}${PORTNAME}
-.endif
-OPTIONSFILE?= ${PORT_DBDIR}/${UNIQUENAME}/options
-.if defined(OPTIONS)
-# include OPTIONSFILE first if exists
-. if exists(${OPTIONSFILE}) && !make(rmconfig)
-. include "${OPTIONSFILE}"
-. endif
-. if exists(${OPTIONSFILE}.local)
-. include "${OPTIONSFILE}.local"
-. endif
-WITHOUT:=
-WITH:=
-. if defined(OPTIONS)
-REALOPTIONS=${OPTIONS:C/".*"//g}
-. for O in ${REALOPTIONS}
-RO:=${O}
-. if ${RO:L} == off
-WITHOUT:= ${WITHOUT} ${OPT}
-. endif
-. if ${RO:L} == on
-WITH:= ${WITH} ${OPT}
-. endif
-OPT:=${RO}
-. endfor
-. endif
-# define only if NO WITH/WITHOUT_${W} is defined
-. for W in ${WITH}
-. if !defined(WITH_${W}) && !defined(WITHOUT_${W})
-WITH_${W}:= true
-. endif
-. endfor
-. for W in ${WITHOUT}
-. if !defined(WITH_${W}) && !defined(WITHOUT_${W})
-WITHOUT_${W}:= true
-. endif
-. endfor
-. undef WITH
-. undef WITHOUT
-. undef RO
-. undef REALOPTIONS
-.endif
-
-.endif
-
-DOS2UNIX_REGEX?= .*
-
-# At least KDE needs TMPDIR for the package building,
-# so we're setting it to the known default value.
-.if defined(PACKAGE_BUILDING)
-TMPDIR?= /tmp
-.endif # defined(PACKAGE_BUILDING)
-
-# Respect TMPDIR passed via make.conf or similar and pass it down
-# to configure and make.
-.if defined(TMPDIR)
-MAKE_ENV+= TMPDIR="${TMPDIR}"
-CONFIGURE_ENV+= TMPDIR="${TMPDIR}"
-.endif # defined(TMPDIR)
-
-# Reset value from bsd.own.mk.
-.if defined(WITH_DEBUG) && !defined(WITHOUT_DEBUG)
-STRIP= #none
-.endif
-
-
-# Start of pre-makefile section.
-.if !defined(AFTERPORTMK) && !defined(INOPTIONSMK)
-
-.if defined(_PREMKINCLUDED)
-check-makefile::
- @${ECHO_MSG} "${PKGNAME}: Makefile error: you cannot include bsd.port[.pre].mk twice"
- @${FALSE}
-.endif
-
-_PREMKINCLUDED= yes
-
-.if defined(PORTVERSION)
-.if ${PORTVERSION:M*[-_,]*}x != x
-IGNORE= PORTVERSION ${PORTVERSION} may not contain '-' '_' or ','
-.endif
-DISTVERSION?= ${PORTVERSION:S/:/::/g}
-.elif defined(DISTVERSION)
-PORTVERSION= ${DISTVERSION:L:C/([a-z])[a-z]+/\1/g:C/([0-9])([a-z])/\1.\2/g:C/:(.)/\1/g:C/[^a-z0-9+]+/./g}
-.endif
-
-PORTREVISION?= 0
-.if ${PORTREVISION} != 0
-_SUF1= _${PORTREVISION}
-.endif
-
-PORTEPOCH?= 0
-.if ${PORTEPOCH} != 0
-_SUF2= ,${PORTEPOCH}
-.endif
-
-PKGVERSION= ${PORTVERSION:C/[-_,]/./g}${_SUF1}${_SUF2}
-PKGNAME= ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PKGVERSION}
-DISTNAME?= ${PORTNAME}-${DISTVERSIONPREFIX}${DISTVERSION:C/:(.)/\1/g}${DISTVERSIONSUFFIX}
-
-INDEXFILE?= INDEX-${OSVERSION:C/([0-9]*)[0-9]{5}/\1/}
-
-DOCSDIR?= ${PREFIX}/share/doc/${PORTNAME}
-EXAMPLESDIR?= ${PREFIX}/share/examples/${PORTNAME}
-DATADIR?= ${PREFIX}/share/${PORTNAME}
-WWWDIR?= ${PREFIX}/www/${PORTNAME}
-ETCDIR?= ${PREFIX}/etc/${PORTNAME}
-
-.if defined(USE_LINUX_RPM)
-.include "${PORTSDIR}/Mk/bsd.linux-rpm.mk"
-.endif
-
-.if defined(USE_LINUX_APPS)
-.include "${PORTSDIR}/Mk/bsd.linux-apps.mk"
-.endif
-
-.if defined(USE_XORG) || defined(XORG_CAT)
-.include "${PORTSDIR}/Mk/bsd.xorg.mk"
-.endif
-
-.if defined(USE_BZIP2)
-EXTRACT_SUFX?= .tar.bz2
-.elif defined(USE_ZIP)
-EXTRACT_SUFX?= .zip
-.elif defined(USE_XZ)
-EXTRACT_SUFX?= .tar.xz
-.elif defined(USE_MAKESELF)
-EXTRACT_SUFX?= .run
-.else
-EXTRACT_SUFX?= .tar.gz
-.endif
-PACKAGES?= ${PORTSDIR}/packages
-TEMPLATES?= ${PORTSDIR}/Templates
-
-PATCHDIR?= ${MASTERDIR}/files
-FILESDIR?= ${MASTERDIR}/files
-SCRIPTDIR?= ${MASTERDIR}/scripts
-PKGDIR?= ${MASTERDIR}
-
-.if defined(USE_LINUX_PREFIX)
-PREFIX?= ${LINUXBASE}
-NO_MTREE= yes
-.else
-PREFIX?= ${LOCALBASE}
-.endif
-
-.if defined(USE_LINUX_PREFIX)
-LDCONFIG_CMD?= ${LINUXBASE}/sbin/ldconfig -r ${LINUXBASE}
-.endif
-
-PKGCOMPATDIR?= ${LOCALBASE}/lib/compat/pkg
-
-.if defined(USE_LOCAL_MK)
-.include "${PORTSDIR}/Mk/bsd.local.mk"
-.endif
-
-.if defined(USE_OPENSSL)
-.include "${PORTSDIR}/Mk/bsd.openssl.mk"
-.endif
-
-.if defined(USE_EMACS)
-.include "${PORTSDIR}/Mk/bsd.emacs.mk"
-.endif
-
-.if defined(USE_GNUSTEP)
-.include "${PORTSDIR}/Mk/bsd.gnustep.mk"
-.endif
-
-.include "${PORTSDIR}/Mk/bsd.perl.mk"
-
-.if defined(USE_PHP)
-.include "${PORTSDIR}/Mk/bsd.php.mk"
-.endif
-
-.if defined(USE_PYTHON) || defined(USE_PYTHON_BUILD) || defined(USE_PYTHON_RUN)
-.include "${PORTSDIR}/Mk/bsd.python.mk"
-.endif
-
-.if defined(USE_EFL) || defined(WANT_EFL) || defined(USE_EFL_ESMART)
-.include "${PORTSDIR}/Mk/bsd.efl.mk"
-.endif
-
-.if defined(USE_FPC) || defined(WANT_FPC_BASE) || defined(WANT_FPC_ALL)
-.include "${PORTSDIR}/Mk/bsd.fpc.mk"
-.endif
-
-.if defined(USE_JAVA)
-.include "${PORTSDIR}/Mk/bsd.java.mk"
-.endif
-
-.if defined(USE_R_MOD)
-.include "${PORTSDIR}/Mk/bsd.cran.mk"
-.endif
-
-.if defined(USE_RUBY) || defined(USE_LIBRUBY)
-.include "${PORTSDIR}/Mk/bsd.ruby.mk"
-.endif
-
-.if defined(USE_OCAML)
-.include "${PORTSDIR}/Mk/bsd.ocaml.mk"
-.endif
-
-.if defined(USE_TCL) || defined(USE_TCL_BUILD) || defined(USE_TCL_RUN) || defined(USE_TCL_WRAPPER) || defined(USE_TK) || defined(USE_TK_BUILD) || defined(USE_TK_RUN) || defined(USE_TK_WRAPPER)
-.include "${PORTSDIR}/Mk/bsd.tcl.mk"
-.endif
-
-.if defined(USE_APACHE) || defined(USE_APACHE_BUILD) || defined(USE_APACHE_RUN)
-.include "${PORTSDIR}/Mk/bsd.apache.mk"
-.endif
-
-.if (defined(USE_QT_VER) && ${USE_QT_VER:L} == 3) || defined(USE_KDELIBS_VER) || defined(USE_KDEBASE_VER)
-.include "${PORTSDIR}/Mk/bsd.kde.mk"
-.endif
-
-.if defined (USE_QT_VER) && ${USE_QT_VER:L} == 4
-.include "${PORTSDIR}/Mk/bsd.qt.mk"
-.endif
-
-.if defined(USE_DRUPAL)
-.include "${PORTSDIR}/Mk/bsd.drupal.mk"
-.endif
-
-.if defined(WANT_GECKO) || defined(USE_GECKO) || defined(USE_FIREFOX) || defined(USE_FIREFOX_BUILD) || defined(USE_SEAMONKEY) || defined(USE_SEAMONKEY_BUILD) || defined(USE_THUNDERBIRD) || defined(USE_THUNDERBIRD_BUILD)
-.include "${PORTSDIR}/Mk/bsd.gecko.mk"
-.endif
-
-.if defined(WANT_GNOME) || defined(USE_GNOME) || defined(INSTALLS_ICONS)
-.include "${PORTSDIR}/Mk/bsd.gnome.mk"
-.endif
-
-.if defined(WANT_LUA) || defined(USE_LUA) || defined(USE_LUA_NOT)
-.include "${PORTSDIR}/Mk/bsd.lua.mk"
-.endif
-
-.if defined(WANT_WX) || defined(USE_WX) || defined(USE_WX_NOT)
-.include "${PORTSDIR}/Mk/bsd.wx.mk"
-.endif
-
-.if defined(WANT_GSTREAMER) || defined(USE_GSTREAMER) || defined(USE_GSTREAMER80)
-.include "${PORTSDIR}/Mk/bsd.gstreamer.mk"
-.endif
-
-.if defined(USE_QMAIL) || defined(USE_QMAIL_RUN) || defined(USE_QMAIL_BUILD) || defined(WANT_QMAIL)
-.include "${PORTSDIR}/Mk/bsd.mail.mk"
-.endif
-
-.if defined(USE_SDL) || defined(WANT_SDL)
-.include "${PORTSDIR}/Mk/bsd.sdl.mk"
-.endif
-
-.if defined(USE_XFCE)
-.include "${PORTSDIR}/Mk/bsd.xfce.mk"
-.endif
-
-.if defined(USE_KDE4) || defined(KDE4_BUILDENV)
-.include "${PORTSDIR}/Mk/bsd.kde4.mk"
-.endif
-
-.if defined(USE_NCURSES)
-.include "${PORTSDIR}/Mk/bsd.ncurses.mk"
-.endif
-
-# You can force skipping these test by defining IGNORE_PATH_CHECKS
-.if !defined(IGNORE_PATH_CHECKS)
-.if (${PREFIX:C,(^.).*,\1,} != "/")
-.BEGIN:
- @${ECHO_MSG} "PREFIX must be defined as an absolute path so that when 'make'"
- @${ECHO_MSG} "is invoked in the work area PREFIX points to the right place."
- @${FALSE}
-.endif
-.endif
-
-# Location of mounted CDROM(s) to search for files
-CD_MOUNTPTS?= /cdrom ${CD_MOUNTPT}
-
-# Owner and group of the WWW user
-WWWOWN?= www
-WWWGRP?= www
-
-.endif
-# End of pre-makefile section.
-
-# Start of post-makefile section.
-.if !defined(BEFOREPORTMK) && !defined(INOPTIONSMK)
-
-.if defined(_POSTMKINCLUDED)
-check-makefile::
- @${ECHO_MSG} "${PKGNAME}: Makefile error: you cannot include bsd.port[.post].mk twice"
- @${FALSE}
-.endif
-
-_POSTMKINCLUDED= yes
-
-WRKDIR?= ${WRKDIRPREFIX}${.CURDIR}/work
-.if defined(NO_WRKSUBDIR)
-WRKSRC?= ${WRKDIR}
-.else
-WRKSRC?= ${WRKDIR}/${DISTNAME}
-.endif
-
-PATCH_WRKSRC?= ${WRKSRC}
-CONFIGURE_WRKSRC?= ${WRKSRC}
-BUILD_WRKSRC?= ${WRKSRC}
-INSTALL_WRKSRC?=${WRKSRC}
-
-PLIST_SUB+= OSREL=${OSREL} PREFIX=%D LOCALBASE=${LOCALBASE}
-SUB_LIST+= PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} \
- DATADIR=${DATADIR} DOCSDIR=${DOCSDIR} EXAMPLESDIR=${EXAMPLESDIR} \
- WWWDIR=${WWWDIR} ETCDIR=${ETCDIR}
-
-PLIST_REINPLACE+= dirrmtry stopdaemon rmtry
-PLIST_REINPLACE_DIRRMTRY=s!^@dirrmtry \(.*\)!@unexec rmdir "%D/\1" 2>/dev/null || true!
-PLIST_REINPLACE_RMTRY=s!^@rmtry \(.*\)!@unexec rm -f %D/\1 2>/dev/null || true!
-PLIST_REINPLACE_STOPDAEMON=s!^@stopdaemon \(.*\)!@unexec %D/etc/rc.d/\1 forcestop 2>/dev/null || true!
-
-# kludge to strip trailing whitespace from CFLAGS;
-# sub-configure will not # survive double space
-CFLAGS:= ${CFLAGS:C/ $//}
-
-.if defined(WITHOUT_CPU_CFLAGS)
-.if defined(_CPUCFLAGS)
-.if !empty(_CPUCFLAGS)
-CFLAGS:= ${CFLAGS:C/${_CPUCFLAGS}//}
-.endif
-.endif
-.endif
-
-.if defined(WITH_DEBUG) && !defined(WITHOUT_DEBUG)
-STRIP_CMD= ${TRUE}
-DEBUG_FLAGS?= -g
-CFLAGS:= ${CFLAGS:N-O*:N-fno-strict*} ${DEBUG_FLAGS}
-.endif
-
-.if defined(NOPORTDOCS)
-PLIST_SUB+= PORTDOCS="@comment "
-.else
-PLIST_SUB+= PORTDOCS=""
-.endif
-
-.if defined(NOPORTEXAMPLES)
-PLIST_SUB+= PORTEXAMPLES="@comment "
-.else
-PLIST_SUB+= PORTEXAMPLES=""
-.endif
-
-.if defined(NOPORTDATA)
-PLIST_SUB+= PORTDATA="@comment "
-.else
-PLIST_SUB+= PORTDATA=""
-.endif
-
-CONFIGURE_SHELL?= ${SH}
-MAKE_SHELL?= ${SH}
-
-CONFIGURE_ENV+= SHELL=${SH} CONFIG_SHELL=${SH}
-MAKE_ENV+= SHELL=${SH} NO_LINT=YES
-
-.if defined(MANCOMPRESSED)
-.if ${MANCOMPRESSED} != yes && ${MANCOMPRESSED} != no && \
- ${MANCOMPRESSED} != maybe
-check-makevars::
- @${ECHO_MSG} "${PKGNAME}: Makefile error: value of MANCOMPRESSED (is \"${MANCOMPRESSED}\") can only be \"yes\", \"no\" or \"maybe\"".
- @${FALSE}
-.endif
-.endif
-
-.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
-MANCOMPRESSED?= yes
-.else
-MANCOMPRESSED?= no
-.endif
-
-.if defined(PATCHFILES)
-.if ${PATCHFILES:M*.zip}x != x
-PATCH_DEPENDS+= ${LOCALBASE}/bin/unzip:${PORTSDIR}/archivers/unzip
-.endif
-.endif
-
-# Check the compatibility layer for amd64/ia64
-
-.if ${ARCH} == "amd64" || ${ARCH} =="ia64"
-.if exists(/usr/lib32)
-HAVE_COMPAT_IA32_LIBS?= YES
-.endif
-.if !defined(HAVE_COMPAT_IA32_KERN)
-HAVE_COMPAT_IA32_KERN!= if ${SYSCTL} -n compat.ia32.maxvmem >/dev/null 2>&1; then echo YES; fi
-.endif
-.endif
-
-.if defined(IA32_BINARY_PORT) && ${ARCH} != "i386"
-.if ${ARCH} == "amd64" || ${ARCH} == "ia64"
-.if !defined(HAVE_COMPAT_IA32_KERN)
-IGNORE= requires a kernel with compiled-in IA32 compatibility
-.elif !defined(HAVE_COMPAT_IA32_LIBS)
-IGNORE= requires 32-bit libraries installed under /usr/lib32
-.endif
-_LDCONFIG_FLAGS=-32
-LIB32DIR= lib32
-.else
-IGNORE= requires i386 (or compatible) platform to run
-.endif
-.else
-LIB32DIR= lib
-.endif
-PLIST_SUB+= LIB32DIR=${LIB32DIR}
-
-.if defined(WITH_PKGNG)
-.if !defined(PKG_DEPENDS)
-PKG_DEPENDS+= ${LOCALBASE}/sbin/pkg:${PORTSDIR}/ports-mgmt/pkg
-.endif
-.endif
-
-.if defined(USE_ZIP)
-EXTRACT_DEPENDS+= ${LOCALBASE}/bin/unzip:${PORTSDIR}/archivers/unzip
-.endif
-.if defined(USE_XZ) && ( (${OSVERSION} >= 900000 && ${OSVERSION} < 900012) || ${OSVERSION} < 800505 )
-EXTRACT_DEPENDS+= ${LOCALBASE}/bin/xz:${PORTSDIR}/archivers/xz
-.endif
-.if defined(USE_MAKESELF)
-EXTRACT_DEPENDS+= unmakeself:${PORTSDIR}/archivers/unmakeself
-.endif
-.if defined(USE_GMAKE)
-BUILD_DEPENDS+= gmake:${PORTSDIR}/devel/gmake
-CONFIGURE_ENV+= MAKE=${GMAKE}
-.endif
-
-.if defined(USE_GCC) || defined(USE_FORTRAN)
-.include "${PORTSDIR}/Mk/bsd.gcc.mk"
-.endif
-
-.if defined(USE_BINUTILS) && !defined(DISABLE_BINUTILS)
-BUILD_DEPENDS+= ${LOCALBASE}/bin/as:${PORTSDIR}/devel/binutils
-BINUTILS?= ADDR2LINE AR AS CPPFILT GPROF LD NM OBJCOPY OBJDUMP RANLIB \
- READELF SIZE STRINGS
-BINUTILS_NO_MAKE_ENV?=
-. for b in ${BINUTILS}
-${b}= ${LOCALBASE}/bin/${b:C/PP/++/:L}
-. if defined(GNU_CONFIGURE) || defined(BINUTILS_CONFIGURE)
-CONFIGURE_ENV+= ${b}="${${b}}"
-. endif
-. if ${BINUTILS_NO_MAKE_ENV:M${b}} == ""
-MAKE_ENV+= ${b}="${${b}}"
-. endif
-. endfor
-.endif
-
-.if defined(USE_OPENLDAP) || defined(WANT_OPENLDAP_VER)
-.include "${PORTSDIR}/Mk/bsd.ldap.mk"
-.endif
-
-.if defined(USE_OPENAL)
-_OPENAL_ALL= al si soft alut
-_OPENAL_LIBS= si soft
-# Default choice.
-_DEFAULT_OPENAL= soft
-
-_OPENAL_SOFT= openal.1:${PORTSDIR}/audio/openal-soft
-_OPENAL_SI= openal.0:${PORTSDIR}/audio/openal
-_OPENAL_ALUT= alut.1:${PORTSDIR}/audio/freealut
-
-.if exists(${LOCALBASE}/lib/libopenal.a)
-_HAVE_OPENAL= si
-.elif exists(${LOCALBASE}/bin/openal-info)
-_HAVE_OPENAL= soft
-.endif
-
-.if ${USE_OPENAL} == "yes"
-# Be friendly.
-USE_OPENAL= ${_DEFAULT_OPENAL}
-.endif
-
-__USED_OPENAL=
-_USE_OPENAL=
-.for component in ${USE_OPENAL}
-.if ${__USED_OPENAL:M${component}} == ""
-__USED_OPENAL+= ${component}
-
-.if ${_OPENAL_ALL:M${component}} == ""
-BROKEN= OPENAL mismatch: unknown component ${component}
-.elif ${_OPENAL_ALL:M${component}} == "al"
-
-# Check if the user wish matches the found OpenAL system.
-.if defined(WANT_OPENAL) && defined(_HAVE_OPENAL) && ${_HAVE_OPENAL} != ${WANT_OPENAL}
-BROKEN= OPENAL mismatch: ${_HAVE_OPENAL} is installed, but ${WANT_OPENAL} desired
-.endif # WANT_OPENAL
-
-.if defined(_HAVE_OPENAL)
-_OPENAL_SYSTEM= ${_HAVE_OPENAL}
-.elif defined(WANT_OPENAL)
-_OPENAL_SYSTEM= ${WANT_OPENAL}
-.else
-_OPENAL_SYSTEM= ${_DEFAULT_OPENAL}
-.endif # _HAVE_OPENAL
-
-_USE_OPENAL+= ${_OPENAL_${_OPENAL_SYSTEM:U}}
-
-.else # ${_OPENAL_ALL:M${component}} == ""
-
-.if ${_OPENAL_LIBS:M${component}} == ${component}
-# Check for the system implementation to use.
-.if defined(WANT_OPENAL) && ${WANT_OPENAL} != ${component}
-BROKEN= OPENAL mismatch: wants to use ${component}, while you wish to use ${WANT_OPENAL}
-.endif
-.if defined(_OPENAL_SYSTEM)
-BROKEN= OPENAL mismatch: cannot use ${component} and al together.
-.endif
-.if defined(_HAVE_OPENAL) && ${_HAVE_OPENAL} != ${component}
-BROKEN= OPENAL mismatch: wants to use ${component}, but ${_HAVE_OPENAL} is installed
-.endif
-
-_OPENAL_SYSTEM= ${component}
-
-.endif # ${_OPENAL_LIBS:M${component}} == ${component}
-
-_USE_OPENAL+= ${_OPENAL_${component:U}}
-
-.endif # ${_OPENAL_ALL:M${component}} == ""
-
-.endif # ${__USED_OPENAL:M${component} == ""
-.endfor # component in ${USE_OPENAL}
-
-.for dep in ${_USE_OPENAL}
-LIB_DEPENDS+= ${dep}
-.endfor
-
-.endif # USE_OPENAL
-
-.if defined(USE_FAM)
-DEFAULT_FAM_SYSTEM= gamin
-# Currently supported FAM systems
-FAM_SYSTEM_FAM= fam.0:${PORTSDIR}/devel/fam
-FAM_SYSTEM_GAMIN= fam.0:${PORTSDIR}/devel/gamin
-
-.if exists(${LOCALBASE}/libexec/gam_server)
-_HAVE_FAM_SYSTEM= gamin
-.elif exists(${LOCALBASE}/bin/fam)
-_HAVE_FAM_SYSTEM= fam
-.endif
-
-.if defined(WANT_FAM_SYSTEM)
-.if defined(WITH_FAM_SYSTEM) && ${WITH_FAM_SYSTEM}!=${WANT_FAM_SYSTEM}
-IGNORE= wants to use ${WANT_FAM_SYSTEM} as its FAM system, while you wish to use ${WITH_FAM_SYSTEM}
-.endif
-FAM_SYSTEM= ${WANT_FAM_SYSTEM}
-.elif defined(WITH_FAM_SYSTEM)
-FAM_SYSTEM= ${WITH_FAM_SYSTEM}
-.else
-.if defined(_HAVE_FAM_SYSTEM)
-FAM_SYSTEM= ${_HAVE_FAM_SYSTEM}
-.else
-FAM_SYSTEM= ${DEFAULT_FAM_SYSTEM}
-.endif
-.endif # WANT_FAM_SYSTEM
-
-.if defined(_HAVE_FAM_SYSTEM)
-.if ${_HAVE_FAM_SYSTEM}!= ${FAM_SYSTEM}
-BROKEN= FAM system mismatch: ${_HAVE_FAM_SYSTEM} is installed, while desired FAM system is ${FAM_SYSTEM}
-.endif
-.endif
-
-.if defined(FAM_SYSTEM_${FAM_SYSTEM:U})
-LIB_DEPENDS+= ${FAM_SYSTEM_${FAM_SYSTEM:U}}
-.else
-IGNORE= cannot be built with unknown FAM system: ${FAM_SYSTEM}
-.endif
-.endif # USE_FAM
-
-.if defined(USE_RC_SUBR) && ${USE_RC_SUBR:U} != "YES"
-SUB_FILES+= ${USE_RC_SUBR}
-.endif
-
-.if defined(USE_RCORDER)
-SUB_FILES+= ${USE_RCORDER}
-.endif
-
-.if defined(USE_LDCONFIG) && ${USE_LDCONFIG:L} == "yes"
-USE_LDCONFIG= ${PREFIX}/lib
-.endif
-.if defined(USE_LDCONFIG32) && ${USE_LDCONFIG32:L} == "yes"
-IGNORE= has USE_LDCONFIG32 set to yes, which is not correct
-.endif
-
-.if defined(USE_ICONV)
-LIB_DEPENDS+= iconv.3:${PORTSDIR}/converters/libiconv
-.endif
-
-.if defined(USE_GETTEXT)
-. if ${USE_GETTEXT:L} == "build"
-BUILD_DEPENDS+= xgettext:${PORTSDIR}/devel/gettext
-. elif ${USE_GETTEXT:L} == "run"
-RUN_DEPENDS+= xgettext:${PORTSDIR}/devel/gettext
-. elif ${USE_GETTEXT:L} == "yes"
-LIB_DEPENDS+= intl:${PORTSDIR}/devel/gettext
-. else
-IGNORE= USE_GETTEXT can be only one of build, run, or yes
-. endif
-.endif
-
-.if defined(USE_LINUX_PREFIX) && defined(USE_LDCONFIG)
-# we need ${LINUXBASE}/sbin/ldconfig
-USE_LINUX?= yes
-.endif
-
-.if defined(USE_LINUX)
-
-. if !defined(LINUX_OSRELEASE)
-LINUX_OSRELEASE!= ${ECHO_CMD} `${SYSCTL} -n compat.linux.osrelease 2>/dev/null`
-. endif
-
-# install(1) also does a brandelf on strip, so don't strip with FreeBSD tools.
-STRIP=
-. if exists(${LINUXBASE}/usr/bin/strip)
-STRIP_CMD= ${LINUXBASE}/usr/bin/strip
-. else
-STRIP_CMD= ${TRUE}
-. endif
-
-# Allow the user to specify another linux_base version.
-. if defined(OVERRIDE_LINUX_BASE_PORT)
-. if ${USE_LINUX:L} == yes
-USE_LINUX= ${OVERRIDE_LINUX_BASE_PORT}
-. endif
-. endif
-
-# NOTE: when you update the default linux_base version (case "yes"),
-# don't forget to update the Handbook!
-
-. if exists(${PORTSDIR}/emulators/linux_base-${USE_LINUX})
-LINUX_BASE_PORT= ${LINUXBASE}/bin/sh:${PORTSDIR}/emulators/linux_base-${USE_LINUX}
-. else
-. if ${USE_LINUX:L} == "yes"
-. if ${OSVERSION} < 800076 || ${LINUX_OSRELEASE} == "2.4.2"
-LINUX_BASE_PORT= ${LINUXBASE}/etc/fedora-release:${PORTSDIR}/emulators/linux_base-fc4
-. else
-LINUX_BASE_PORT= ${LINUXBASE}/etc/fedora-release:${PORTSDIR}/emulators/linux_base-f10
-. endif
-. else
-IGNORE= cannot be built: there is no emulators/linux_base-${USE_LINUX}, perhaps wrong use of USE_LINUX or OVERRIDE_LINUX_BASE_PORT
-. endif
-. endif
-
-RUN_DEPENDS+= ${LINUX_BASE_PORT}
-.endif
-
-.if defined(USE_MOTIF)
-USE_XORG+= xpm
-.if defined(WANT_LESSTIF)
-LIB_DEPENDS+= Xm:${PORTSDIR}/x11-toolkits/lesstif
-NO_OPENMOTIF= yes
-.endif
-.if !defined(NO_OPENMOTIF)
-LIB_DEPENDS+= Xm.4:${PORTSDIR}/x11-toolkits/open-motif
-.endif
-.endif
-
-.if defined(USE_FREETYPE)
-LIB_DEPENDS+= ttf.4:${PORTSDIR}/print/freetype
-.endif
-
-X_IMAKE_PORT= ${PORTSDIR}/devel/imake
-X_LIBRARIES_PORT= ${PORTSDIR}/x11/xorg-libraries
-X_CLIENTS_PORT= ${PORTSDIR}/x11/xorg-apps
-X_SERVER_PORT= ${PORTSDIR}/x11-servers/xorg-server
-X_FONTSERVER_PORT= ${PORTSDIR}/x11-fonts/xfs
-X_PRINTSERVER_PORT= ${PORTSDIR}/x11-servers/xorg-printserver
-X_VFBSERVER_PORT= ${PORTSDIR}/x11-servers/xorg-vfbserver
-X_NESTSERVER_PORT= ${PORTSDIR}/x11-servers/xorg-nestserver
-X_FONTS_ENCODINGS_PORT= ${PORTSDIR}/x11-fonts/encodings
-X_FONTS_MISC_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-miscbitmaps
-X_FONTS_100DPI_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-100dpi
-X_FONTS_75DPI_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-75dpi
-X_FONTS_CYRILLIC_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-cyrillic
-X_FONTS_TTF_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-truetype
-X_FONTS_TYPE1_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-type1
-X_FONTS_ALIAS_PORT= ${PORTSDIR}/x11-fonts/font-alias
-
-.if defined(USE_IMAKE)
-CONFIGURE_ENV+= IMAKECPP="${CPP}"
-MAKE_ENV+= IMAKECPP="${CPP}"
-MAKE_FLAGS?= CC="${CC}" CXX="${CXX}"
-BUILD_DEPENDS+= imake:${X_IMAKE_PORT}
-.endif
-
-.if defined(USE_DISPLAY) && !defined(DISPLAY)
-BUILD_DEPENDS+= Xvfb:${X_VFBSERVER_PORT} \
- ${LOCALBASE}/lib/X11/fonts/misc/8x13O.pcf.gz:${X_FONTS_MISC_PORT} \
- ${LOCALBASE}/lib/X11/fonts/misc/fonts.alias:${X_FONTS_ALIAS_PORT} \
- ${LOCALBASE}/share/X11/xkb/rules/base:${PORTSDIR}/x11/xkeyboard-config \
- xkbcomp:${PORTSDIR}/x11/xkbcomp
-.if !defined(PACKAGE_BUILDING)
-CONFIGURE_ENV+= DISPLAY="localhost:1001"
-MAKE_ENV+= DISPLAY="localhost:1001"
-.endif
-.endif
-
-XAWVER= 8
-PKG_IGNORE_DEPENDS?= 'this_port_does_not_exist'
-
-PLIST_SUB+= XAWVER=${XAWVER}
-
-_GL_gl_LIB_DEPENDS= GL.1:${PORTSDIR}/graphics/libGL
-_GL_glew_LIB_DEPENDS= GLEW.1:${PORTSDIR}/graphics/glew
-_GL_glu_LIB_DEPENDS= GLU.1:${PORTSDIR}/graphics/libGLU
-_GL_glw_LIB_DEPENDS= GLw.1:${PORTSDIR}/graphics/libGLw
-_GL_glut_LIB_DEPENDS= glut.3:${PORTSDIR}/graphics/libglut
-_GL_linux_RUN_DEPENDS= ${LINUXBASE}/usr/X11R6/lib/libGL.so.1:${PORTSDIR}/graphics/linux_dri
-
-.if defined(USE_GL)
-. if ${USE_GL:L} == "yes"
-USE_GL= glu
-. endif
-. for _component in ${USE_GL}
-. if !defined(_GL_${_component}_LIB_DEPENDS) && \
- !defined(_GL_${_component}_RUN_DEPENDS)
-IGNORE= uses unknown GL component
-. else
-LIB_DEPENDS+= ${_GL_${_component}_LIB_DEPENDS}
-RUN_DEPENDS+= ${_GL_${_component}_RUN_DEPENDS}
-. endif
-. endfor
-.endif
-
-.if defined(USE_BISON)
-_BISON_DEPENDS= bison:${PORTSDIR}/devel/bison
-
-. if ${USE_BISON:L} == "build"
-BUILD_DEPENDS+= ${_BISON_DEPENDS}
-. elif ${USE_BISON:L} == "run"
-RUN_DEPENDS+= ${_BISON_DEPENDS}
-. elif ${USE_BISON:L} == "both"
-BUILD_DEPENDS+= ${_BISON_DEPENDS}
-RUN_DEPENDS+= ${_BISON_DEPENDS}
-. else
-IGNORE= uses unknown USE_BISON construct
-. endif
-
-.endif
-
-.if defined(WITH_PKGNG)
-.include "${PORTSDIR}/Mk/bsd.pkgng.mk"
-.endif
-.if defined(USE_LOCAL_MK)
-.include "${PORTSDIR}/Mk/bsd.local.mk"
-.endif
-
-.if defined(USE_XORG) || defined(XORG_CAT)
-.include "${PORTSDIR}/Mk/bsd.xorg.mk"
-.endif
-
-.if defined(USE_MYSQL) || defined(WANT_MYSQL_VER) || \
- defined(USE_PGSQL) || defined(WANT_PGSQL_VER) || \
- defined(USE_BDB) || defined(USE_SQLITE) || defined(USE_FIREBIRD)
-.include "${PORTSDIR}/Mk/bsd.database.mk"
-.endif
-
-.if defined(WANT_GSTREAMER) || defined(USE_GSTREAMER) || defined(USE_GSTREAMER80)
-.include "${PORTSDIR}/Mk/bsd.gstreamer.mk"
-.endif
-
-.if defined(USE_EFL) || defined(WANT_EFL) || defined(USE_EFL_ESMART)
-.include "${PORTSDIR}/Mk/bsd.efl.mk"
-.endif
-
-.if defined(USE_JAVA)
-.include "${PORTSDIR}/Mk/bsd.java.mk"
-.endif
-
-.if defined(USE_LINUX_RPM)
-.include "${PORTSDIR}/Mk/bsd.linux-rpm.mk"
-.endif
-
-.if defined(USE_LINUX_APPS)
-.include "${PORTSDIR}/Mk/bsd.linux-apps.mk"
-.endif
-
-.if defined (USE_QT_VER) && ${USE_QT_VER:L} == 4
-.include "${PORTSDIR}/Mk/bsd.qt.mk"
-.endif
-
-.if defined(USE_SCONS)
-.include "${PORTSDIR}/Mk/bsd.scons.mk"
-.endif
-
-.if defined(USE_SDL) || defined(WANT_SDL)
-.include "${PORTSDIR}/Mk/bsd.sdl.mk"
-.endif
-
-.include "${PORTSDIR}/Mk/bsd.perl.mk"
-
-.if defined(USE_PHP)
-.include "${PORTSDIR}/Mk/bsd.php.mk"
-.endif
-
-.if defined(USE_PYTHON)
-.include "${PORTSDIR}/Mk/bsd.python.mk"
-.endif
-
-.if defined(USE_TCL) || defined(USE_TCL_BUILD) || defined(USE_TK) || defined(USE_TK_BUILD)
-.include "${PORTSDIR}/Mk/bsd.tcl.mk"
-.endif
-
-.if defined(USE_LUA) || defined(USE_LUA_NOT)
-.include "${PORTSDIR}/Mk/bsd.lua.mk"
-.endif
-
-.if defined(USE_WX) || defined(USE_WX_NOT)
-.include "${PORTSDIR}/Mk/bsd.wx.mk"
-.endif
-
-.if defined(USE_APACHE) || defined(USE_APACHE_BUILD) || defined(USE_APACHE_RUN)
-.include "${PORTSDIR}/Mk/bsd.apache.mk"
-.endif
-
-.if defined(USE_AUTOTOOLS)
-.include "${PORTSDIR}/Mk/bsd.autotools.mk"
-.endif
-
-.if defined(USE_FPC) || defined(WANT_FPC_BASE) || defined(WANT_FPC_ALL)
-.include "${PORTSDIR}/Mk/bsd.fpc.mk"
-.endif
-
-.if defined(WANT_GECKO) || defined(USE_GECKO)
-.include "${PORTSDIR}/Mk/bsd.gecko.mk"
-.endif
-
-.if defined(WANT_GNOME) || defined(USE_GNOME)
-.include "${PORTSDIR}/Mk/bsd.gnome.mk"
-.endif
-
-.if defined(USE_XFCE)
-.include "${PORTSDIR}/Mk/bsd.xfce.mk"
-.endif
-
-.if defined(USE_KDE4)
-.include "${PORTSDIR}/Mk/bsd.kde4.mk"
-.endif
-
-.if defined(USE_CMAKE)
-.include "${PORTSDIR}/Mk/bsd.cmake.mk"
-.endif
-
-.if exists(${PORTSDIR}/../Makefile.inc)
-.include "${PORTSDIR}/../Makefile.inc"
-USE_SUBMAKE= yes
-.endif
-
-.if defined(USE_XLIB)
-. if defined(USE_LINUX)
-RUN_DEPENDS+= ${LINUXBASE}/usr/X11R6/lib/libXrender.so.1:${PORTSDIR}/x11/linux-xorg-libs
-. else
-BUILD_DEPENDS+= ${LOCALBASE}/libdata/xorg/libraries:${X_LIBRARIES_PORT}
-RUN_DEPENDS+= ${LOCALBASE}/libdata/xorg/libraries:${X_LIBRARIES_PORT}
-. endif
-.endif
-
-.if defined(USE_XLIB) || defined(USE_XORG)
-# Add explicit X options to avoid problems with false positives in configure
-.if defined(GNU_CONFIGURE)
-CONFIGURE_ARGS+=--x-libraries=${LOCALBASE}/lib --x-includes=${LOCALBASE}/include
-.endif
-.endif
-
-# Set the default for the installation of Postscript(TM)-
-# compatible functionality.
-.if !defined(USE_GHOSTSCRIPT)
-. if defined(USE_GHOSTSCRIPT_BUILD)
-_USE_GHOSTSCRIPT= ${USE_GHOSTSCRIPT_BUILD}
-. elif defined(USE_GHOSTSCRIPT_RUN)
-_USE_GHOSTSCRIPT= ${USE_GHOSTSCRIPT_RUN}
-. endif
-.else
-_USE_GHOSTSCRIPT= ${USE_GHOSTSCRIPT}
-.endif
-
-.if defined(WITH_GHOSTSCRIPT_VER) && !empty(WITH_GHOSTSCRIPT_VER:M[789])
-_USE_GHOSTSCRIPT_DEFAULT_VER= ${WITH_GHOSTSCRIPT_VER}
-.else
-_USE_GHOSTSCRIPT_DEFAULT_VER= 9
-.endif
-
-.if defined(_USE_GHOSTSCRIPT)
-. if !defined(WITHOUT_X11)
-_USE_GHOSTSCRIPT_PKGNAME_SUFFIX=
-. else
-_USE_GHOSTSCRIPT_PKGNAME_SUFFIX=-nox11
-. endif
-. if !empty(_USE_GHOSTSCRIPT:M[789])
-_USE_GHOSTSCRIPT_VER=${_USE_GHOSTSCRIPT:M[789]}
-. else
-_USE_GHOSTSCRIPT_VER=${_USE_GHOSTSCRIPT_DEFAULT_VER}
-. endif
-.else
-_USE_GHOSTSCRIPT_VER=${_USE_GHOSTSCRIPT_DEFAULT_VER}
-.endif
-
-# Sanity check
-.if defined(_USE_GHOSTSCRIPT) && defined(WITH_GHOSTSCRIPT_VER)
-. if empty(WITH_GHOSTSCRIPT_VER:M[789])
-. error You set an invalid value "${WITH_GHOSTSCRIPT_VER}" in WITH_GHOSTSCRIPT_VER. Abort.
-. elif ${_USE_GHOSTSCRIPT_VER} != ${WITH_GHOSTSCRIPT_VER}
-. error You set WITH_GHOSTSCRIPT_VER as ${WITH_GHOSTSCRIPT_VER} but ${PKGNAME} requires print/ghostscript${_USE_GHOSTSCRIPT_VER}. Abort.
-. endif
-.endif
-
-GHOSTSCRIPT_PORT?= print/ghostscript${_USE_GHOSTSCRIPT_VER}${_USE_GHOSTSCRIPT_PKGNAME_SUFFIX}
-
-# Set up the ghostscript dependencies.
-.if defined(USE_GHOSTSCRIPT) || defined(USE_GHOSTSCRIPT_BUILD)
-BUILD_DEPENDS+= gs:${PORTSDIR}/${GHOSTSCRIPT_PORT}
-.endif
-.if defined(USE_GHOSTSCRIPT) || defined(USE_GHOSTSCRIPT_RUN)
-RUN_DEPENDS+= gs:${PORTSDIR}/${GHOSTSCRIPT_PORT}
-.endif
-
-# Set up the cdrtools.
-.if defined(USE_CDRTOOLS)
-BUILD_DEPENDS+= cdrecord:${PORTSDIR}/sysutils/cdrtools
-RUN_DEPENDS+= cdrecord:${PORTSDIR}/sysutils/cdrtools
-.endif
-
-# Macro for doing in-place file editing using regexps
-REINPLACE_ARGS?= -i.bak
-REINPLACE_CMD?= ${SED} ${REINPLACE_ARGS}
-
-# Names of cookies used to skip already completed stages
-EXTRACT_COOKIE?= ${WRKDIR}/.extract_done.${PORTNAME}.${PREFIX:S/\//_/g}
-CONFIGURE_COOKIE?= ${WRKDIR}/.configure_done.${PORTNAME}.${PREFIX:S/\//_/g}
-INSTALL_COOKIE?= ${WRKDIR}/.install_done.${PORTNAME}.${PREFIX:S/\//_/g}
-BUILD_COOKIE?= ${WRKDIR}/.build_done.${PORTNAME}.${PREFIX:S/\//_/g}
-PATCH_COOKIE?= ${WRKDIR}/.patch_done.${PORTNAME}.${PREFIX:S/\//_/g}
-PACKAGE_COOKIE?= ${WRKDIR}/.package_done.${PORTNAME}.${PREFIX:S/\//_/g}
-
-# How to do nothing. Override if you, for some strange reason, would rather
-# do something.
-DO_NADA?= ${TRUE}
-
-# Use this as the first operand to always build dependency.
-NONEXISTENT?= /nonexistent
-
-CHECKSUM_ALGORITHMS?= sha256
-
-DISTINFO_FILE?= ${MASTERDIR}/distinfo
-
-MAKE_FLAGS?= -f
-MAKEFILE?= Makefile
-MAKE_ENV+= PREFIX=${PREFIX} \
- LOCALBASE=${LOCALBASE} \
- MOTIFLIB="${MOTIFLIB}" LIBDIR="${LIBDIR}" \
- CC="${CC}" CFLAGS="${CFLAGS}" \
- CPP="${CPP}" CPPFLAGS="${CPPFLAGS}" \
- LDFLAGS="${LDFLAGS}" \
- CXX="${CXX}" CXXFLAGS="${CXXFLAGS}" \
- MANPREFIX="${MANPREFIX}"
-
-# Add -fno-strict-aliasing to CFLAGS with optimization level -O2 or higher.
-# gcc 4.x enable strict aliasing optimization with -O2 which is known to break
-# a lot of ports.
-.if !defined(WITHOUT_NO_STRICT_ALIASING)
-.if ${CC} != "icc"
-.if !empty(CFLAGS:M-O[23s]) && empty(CFLAGS:M-fno-strict-aliasing)
-CFLAGS+= -fno-strict-aliasing
-.endif
-.endif
-.endif
-
-.if defined(USE_CSTD)
-CFLAGS:= ${CFLAGS:N-std=*} -std=${USE_CSTD}
-.endif
-
-# Multiple make jobs support
-.if defined(DISABLE_MAKE_JOBS) || defined(MAKE_JOBS_UNSAFE)
-_MAKE_JOBS= #
-.else
-.if defined(MAKE_JOBS_SAFE) || defined(FORCE_MAKE_JOBS)
-MAKE_JOBS_NUMBER?= `${SYSCTL} -n kern.smp.cpus`
-_MAKE_JOBS?= -j${MAKE_JOBS_NUMBER}
-.if defined(FORCE_MAKE_JOBS) && !defined(MAKE_JOBS_SAFE)
-BUILD_FAIL_MESSAGE+= "You have chosen to use multiple make jobs (parallelization) for all ports. This port was not tested for this setting. Please remove FORCE_MAKE_JOBS and retry the build before reporting the failure to the maintainer."
-.endif
-.endif
-.endif
-
-PTHREAD_CFLAGS?=
-PTHREAD_LIBS?= -pthread
-
-.if exists(/usr/bin/fetch)
-FETCH_BINARY?= /usr/bin/fetch
-FETCH_ARGS?= -AFpr
-FETCH_REGET?= 1
-.if !defined(DISABLE_SIZE)
-FETCH_BEFORE_ARGS+= $${CKSIZE:+-S $$CKSIZE}
-.endif
-.else
-FETCH_BINARY?= /usr/bin/ftp
-FETCH_ARGS?= -R
-FETCH_REGET?= 0
-.endif
-FETCH_CMD?= ${FETCH_BINARY} ${FETCH_ARGS}
-
-.if defined(RANDOMIZE_MASTER_SITES)
-.if exists(/usr/games/random)
-RANDOM_CMD?= /usr/games/random
-RANDOM_ARGS?= "-w -f -"
-_RANDOMIZE_SITES= " |${RANDOM_CMD} ${RANDOM_ARGS}"
-.endif
-.endif
-
-TOUCH?= /usr/bin/touch
-TOUCH_FLAGS?= -f
-
-DISTORIG?= .bak.orig
-PATCH?= /usr/bin/patch
-PATCH_STRIP?= -p0
-PATCH_DIST_STRIP?= -p0
-.if defined(PATCH_DEBUG)
-PATCH_DEBUG_TMP= yes
-PATCH_ARGS?= -d ${PATCH_WRKSRC} -E ${PATCH_STRIP}
-PATCH_DIST_ARGS?= --suffix ${DISTORIG} -d ${PATCH_WRKSRC} -E ${PATCH_DIST_STRIP}
-.else
-PATCH_DEBUG_TMP= no
-PATCH_ARGS?= -d ${PATCH_WRKSRC} --forward --quiet -E ${PATCH_STRIP}
-PATCH_DIST_ARGS?= --suffix ${DISTORIG} -d ${PATCH_WRKSRC} --forward --quiet -E ${PATCH_DIST_STRIP}
-.endif
-.if defined(BATCH)
-PATCH_ARGS+= --batch
-PATCH_DIST_ARGS+= --batch
-.endif
-
-# Prevent breakage with VERSION_CONTROL=numbered
-PATCH_ARGS+= -V simple
-
-.if defined(PATCH_CHECK_ONLY)
-PATCH_ARGS+= -C
-PATCH_DIST_ARGS+= -C
-.endif
-
-.if ${PATCH} == "/usr/bin/patch"
-PATCH_ARGS+= --suffix .orig
-PATCH_DIST_ARGS+= --suffix .orig
-.endif
-
-TAR?= /usr/bin/tar
-
-# EXTRACT_SUFX is defined in .pre.mk section
-.if defined(USE_ZIP)
-EXTRACT_CMD?= ${UNZIP_CMD}
-EXTRACT_BEFORE_ARGS?= -qo
-EXTRACT_AFTER_ARGS?= -d ${WRKDIR}
-.elif defined(USE_MAKESELF)
-EXTRACT_CMD?= ${UNMAKESELF_CMD}
-EXTRACT_BEFORE_ARGS?=
-EXTRACT_AFTER_ARGS?=
-.else
-EXTRACT_BEFORE_ARGS?= -dc
-.if defined(EXTRACT_PRESERVE_OWNERSHIP)
-EXTRACT_AFTER_ARGS?= | ${TAR} -xf -
-.else
-EXTRACT_AFTER_ARGS?= | ${TAR} -xf - --no-same-owner --no-same-permissions
-.endif
-.if defined(USE_BZIP2)
-EXTRACT_CMD?= ${BZIP2_CMD}
-.elif defined(USE_XZ)
-EXTRACT_CMD?= ${XZ_CMD}
-.else
-EXTRACT_CMD?= ${GZIP_CMD}
-.endif
-.endif
-
-# Figure out where the local mtree file is
-.if !defined(MTREE_FILE) && !defined(NO_MTREE)
-.if ${PREFIX} == /usr
-MTREE_FILE= /etc/mtree/BSD.usr.dist
-.else
-MTREE_FILE= ${PORTSDIR}/Templates/BSD.local.dist
-.endif
-MTREE_FILE_DEFAULT=yes
-.endif
-MTREE_CMD?= /usr/sbin/mtree
-MTREE_ARGS?= -U ${MTREE_FOLLOWS_SYMLINKS} -f ${MTREE_FILE} -d -e -p
-
-READLINK_CMD?= /usr/bin/readlink
-
-# Determine whether or not we can use rootly owner/group functions.
-.if !defined(UID)
-UID!= ${ID} -u
-.endif
-.if ${UID} == 0
-_BINOWNGRP= -o ${BINOWN} -g ${BINGRP}
-_SHROWNGRP= -o ${SHAREOWN} -g ${SHAREGRP}
-_MANOWNGRP= -o ${MANOWN} -g ${MANGRP}
-.else
-_BINOWNGRP=
-_SHROWNGRP=
-_MANOWNGRP=
-.endif
-
-# A few aliases for *-install targets
-INSTALL_PROGRAM= \
- ${INSTALL} ${COPY} ${STRIP} ${_BINOWNGRP} -m ${BINMODE}
-INSTALL_KLD= \
- ${INSTALL} ${COPY} ${_BINOWNGRP} -m ${BINMODE}
-INSTALL_LIB= \
- ${INSTALL} ${COPY} ${STRIP} ${_SHROWNGRP} -m ${SHAREMODE}
-INSTALL_SCRIPT= \
- ${INSTALL} ${COPY} ${_BINOWNGRP} -m ${BINMODE}
-INSTALL_DATA= \
- ${INSTALL} ${COPY} ${_SHROWNGRP} -m ${SHAREMODE}
-INSTALL_MAN= \
- ${INSTALL} ${COPY} ${_MANOWNGRP} -m ${MANMODE}
-
-INSTALL_MACROS= BSD_INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
- BSD_INSTALL_LIB="${INSTALL_LIB}" \
- BSD_INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
- BSD_INSTALL_DATA="${INSTALL_DATA}" \
- BSD_INSTALL_MAN="${INSTALL_MAN}"
-MAKE_ENV+= ${INSTALL_MACROS}
-SCRIPTS_ENV+= ${INSTALL_MACROS}
-
-# Macro for copying entire directory tree with correct permissions
-.if ${UID} == 0
-COPYTREE_BIN= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \
- 2>&1) && \
- ${CHOWN} -R ${BINOWN}:${BINGRP} $$1 && \
- ${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \
- ${FIND} -d $$0 $$2 -type f -exec chmod ${BINMODE} $$1/{} \;' --
-COPYTREE_SHARE= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \
- 2>&1) && \
- ${CHOWN} -R ${SHAREOWN}:${SHAREGRP} $$1 && \
- ${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \
- ${FIND} -d $$0 $$2 -type f -exec chmod ${SHAREMODE} $$1/{} \;' --
-.else
-COPYTREE_BIN= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \
- 2>&1) && \
- ${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \
- ${FIND} -d $$0 $$2 -type f -exec chmod ${BINMODE} $$1/{} \;' --
-COPYTREE_SHARE= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \
- 2>&1) && \
- ${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \
- ${FIND} -d $$0 $$2 -type f -exec chmod ${SHAREMODE} $$1/{} \;' --
-.endif
-
-# The user can override the NO_PACKAGE by specifying this from
-# the make command line
-.if defined(FORCE_PACKAGE)
-.undef NO_PACKAGE
-.endif
-
-DESCR?= ${PKGDIR}/pkg-descr
-PLIST?= ${PKGDIR}/pkg-plist
-PKGINSTALL?= ${PKGDIR}/pkg-install
-PKGDEINSTALL?= ${PKGDIR}/pkg-deinstall
-PKGREQ?= ${PKGDIR}/pkg-req
-PKGMESSAGE?= ${PKGDIR}/pkg-message
-
-TMPPLIST?= ${WRKDIR}/.PLIST.mktmp
-TMPPLIST_SORT?= ${WRKDIR}/.PLIST.mktmp.sorted
-TMPGUCMD?= ${WRKDIR}/.PLIST.gucmd
-
-.for _CATEGORY in ${CATEGORIES}
-PKGCATEGORY?= ${_CATEGORY}
-.endfor
-_PORTDIRNAME= ${.CURDIR:T}
-PORTDIRNAME?= ${_PORTDIRNAME}
-PKGORIGIN?= ${PKGCATEGORY}/${PORTDIRNAME}
-
-
-.if !defined(PKG_ARGS)
-PKG_ARGS= -v -c -${COMMENT:Q} -d ${DESCR} -f ${TMPPLIST} -p ${PREFIX} -P "`cd ${.CURDIR} && ${MAKE} actual-package-depends | ${GREP} -v -E ${PKG_IGNORE_DEPENDS} | ${SORT} -u -t : -k 2`" ${EXTRA_PKG_ARGS} $${_LATE_PKG_ARGS}
-.if !defined(NO_MTREE)
-PKG_ARGS+= -m ${MTREE_FILE}
-.endif
-.if defined(PKGORIGIN)
-PKG_ARGS+= -o ${PKGORIGIN}
-.endif
-.if defined(CONFLICTS) && !defined(DISABLE_CONFLICTS)
-PKG_ARGS+= -C "${CONFLICTS}"
-.endif
-.if defined(CONFLICTS_INSTALL) && !defined(DISABLE_CONFLICTS)
-PKG_ARGS+= -C "${CONFLICTS_INSTALL}"
-.endif
-.endif
-.if defined(PKG_NOCOMPRESS)
-PKG_SUFX?= .tar
-.else
-.if defined(WITH_PKGNG)
-PKG_SUFX?= .txz
-.else
-PKG_SUFX?= .tbz
-.endif
-.endif
-# where pkg_add records its dirty deeds.
-PKG_DBDIR?= /var/db/pkg
-
-MOTIFLIB?= -L${LOCALBASE}/lib -lXm -lXp
-
-ALL_TARGET?= all
-INSTALL_TARGET?= install
-
-# Integrate with the license auditing framework
-.if !defined (DISABLE_LICENSES)
-.include "${PORTSDIR}/Mk/bsd.licenses.mk"
-.endif
-
-# Popular master sites
-.include "${PORTSDIR}/Mk/bsd.sites.mk"
-
-# Empty declaration to avoid "variable MASTER_SITES recursive" error
-MASTER_SITES?=
-PATCH_SITES?=
-_MASTER_SITES_DEFAULT?=
-_PATCH_SITES_DEFAULT?=
-
-# Feed internal _{MASTER,PATCH}_SITES_n where n is a group designation
-# as per grouping rules (:something)
-# Organize _{MASTER,PATCH}_SITES_{DEFAULT,[^/:]+} according to grouping
-# rules (:something)
-.for _S in ${MASTER_SITES}
-_S_TEMP= ${_S:S/^${_S:C@/?:[^/:]+$@/@}//:S/^://}
-. if !empty(_S_TEMP)
-. for _group in ${_S_TEMP:S/,/ /g}
-_G_TEMP= ${_group}
-. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default
-check-makevars::
- @${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be"
- @${ECHO_MSG} "used in group definitions. Please fix your MASTER_SITES"
- @${FALSE}
-. endif
-_MASTER_SITES_${_group}+= ${_S:C@^(.*/):[^/:]+$@\1@}
-. endfor
-. else
-_MASTER_SITES_DEFAULT+= ${_S:C@^(.*/):[^/:]+$@\1@}
-. endif
-.endfor
-.for _S in ${PATCH_SITES}
-_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://}
-. if !empty(_S_TEMP)
-. for _group in ${_S_TEMP:S/,/ /g}
-_G_TEMP= ${_group}
-. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default
-check-makevars::
- @${ECHO_MSG} "The words all, ALL and default are reserved and cannot be"
- @${ECHO_MSG} "used in group definitions. Please fix your PATCH_SITES"
- @${FALSE}
-. endif
-_PATCH_SITES_${_group}+= ${_S:C@^(.*/):[^/:]+$@\1@}
-. endfor
-. else
-_PATCH_SITES_DEFAULT+= ${_S:C@^(.*/):[^/:]+$@\1@}
-. endif
-.endfor
-
-# Feed internal _{MASTER,PATCH}_SITE_SUBDIR_n where n is a group designation
-# as per grouping rules (:something)
-# Organize _{MASTER,PATCH}_SITE_SUBDIR_{DEFAULT,[^/:]+} according to grouping
-# rules (:something)
-.for _S in ${MASTER_SITE_SUBDIR}
-_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://}
-. if !empty(_S_TEMP)
-. for _group in ${_S_TEMP:S/,/ /g}
-_G_TEMP= ${_group}
-. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default
-check-makevars::
- @${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be"
- @${ECHO_MSG} "used in group definitions. Please fix your MASTER_SITE_SUBDIR"
- @${FALSE}
-. endif
-. if defined(_MASTER_SITES_${_group})
-_MASTER_SITE_SUBDIR_${_group}+= ${_S:C@^(.*)/:[^/:]+$@\1@}
-. endif
-. endfor
-. else
-. if defined(_MASTER_SITES_DEFAULT)
-_MASTER_SITE_SUBDIR_DEFAULT+= ${_S:C@^(.*)/:[^/:]+$@\1@}
-. endif
-. endif
-.endfor
-.for _S in ${PATCH_SITE_SUBDIR}
-_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://}
-. if !empty(_S_TEMP)
-. for _group in ${_S_TEMP:S/,/ /g}
-_G_TEMP= ${_group}
-. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default
-check-makevars::
- @${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be"
- @${ECHO_MSG} "used in group definitions. Please fix your PATCH_SITE_SUBDIR"
- @${FALSE}
-. endif
-. if defined(_PATCH_SITES_${_group})
-_PATCH_SITE_SUBDIR_${_group}+= ${_S:C@^(.*)/:[^/:]+$@\1@}
-. endif
-. endfor
-. else
-. if defined(_PATCH_SITES_DEFAULT)
-_PATCH_SITE_SUBDIR_DEFAULT+= ${_S:C@^(.*)/:[^/:]+$@\1@}
-. endif
-. endif
-.endfor
-
-# Substitute subdirectory names
-# XXX simpler/faster solution but not the best space wise, suggestions please
-.for _S in ${MASTER_SITES}
-_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://}
-. if !empty(_S_TEMP)
-. for _group in ${_S_TEMP:S/,/ /g}
-. if !defined(_MASTER_SITE_SUBDIR_${_group})
-MASTER_SITES_TMP= ${_MASTER_SITES_${_group}:S^%SUBDIR%/^^}
-. else
-_S_TEMP_TEMP= ${_MASTER_SITES_${_group}:M*%SUBDIR%/*}
-. if empty(_S_TEMP_TEMP)
-MASTER_SITES_TMP= ${_MASTER_SITES_${_group}}
-. else
-MASTER_SITES_TMP=
-. for site in ${_MASTER_SITES_${_group}}
-_S_TEMP_TEMP= ${site:M*%SUBDIR%/*}
-. if empty(_S_TEMP_TEMP)
-MASTER_SITES_TMP+= ${site}
-. else
-. for dir in ${_MASTER_SITE_SUBDIR_${_group}}
-MASTER_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^}
-. endfor
-. endif
-. endfor
-. endif
-. endif
-_MASTER_SITES_${_group}:= ${MASTER_SITES_TMP}
-. endfor
-. endif
-.endfor
-.if defined(_MASTER_SITE_SUBDIR_DEFAULT)
-_S_TEMP= ${_MASTER_SITES_DEFAULT:M*%SUBDIR%/*}
-. if empty(_S_TEMP)
-MASTER_SITES_TMP= ${_MASTER_SITES_DEFAULT}
-. else
-MASTER_SITES_TMP=
-. for site in ${_MASTER_SITES_DEFAULT}
-_S_TEMP_TEMP= ${site:M*%SUBDIR%/*}
-. if empty(_S_TEMP_TEMP)
-MASTER_SITES_TMP+= ${site}
-. else
-. for dir in ${_MASTER_SITE_SUBDIR_DEFAULT}
-MASTER_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^}
-. endfor
-. endif
-. endfor
-. endif
-.else
-MASTER_SITES_TMP= ${_MASTER_SITES_DEFAULT:S^%SUBDIR%/^^}
-.endif
-_MASTER_SITES_DEFAULT:= ${MASTER_SITES_TMP}
-MASTER_SITES_TMP=
-.for _S in ${PATCH_SITES}
-_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://}
-. if !empty(_S_TEMP)
-. for _group in ${_S_TEMP:S/,/ /g}
-. if !defined(_PATCH_SITE_SUBDIR_${_group})
-PATCH_SITES_TMP= ${_PATCH_SITES_${_group}:S^%SUBDIR%/^^}
-. else
-_S_TEMP_TEMP= ${_PATCH_SITES_${_group}:M*%SUBDIR%/*}
-. if empty(_S_TEMP_TEMP)
-PATCH_SITES_TMP= ${_PATCH_SITES_${_group}}
-. else
-PATCH_SITES_TMP=
-. for site in ${_PATCH_SITES_${_group}}
-_S_TEMP_TEMP= ${site:M*%SUBDIR%/*}
-. if empty(_S_TEMP_TEMP)
-PATCH_SITES_TMP+= ${site}
-. else
-. for dir in ${_PATCH_SITE_SUBDIR_${_group}}
-PATCH_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^}
-. endfor
-. endif
-. endfor
-. endif
-. endif
-_PATCH_SITES_${_group}:= ${PATCH_SITES_TMP}
-. endfor
-. endif
-.endfor
-.if defined(_PATCH_SITE_SUBDIR_DEFAULT)
-_S_TEMP= ${_PATCH_SITES_DEFAULT:M*%SUBDIR%/*}
-. if empty(_S_TEMP)
-PATCH_SITES_TMP= ${_PATCH_SITES_DEFAULT}
-. else
-PATCH_SITES_TMP=
-. for site in ${_PATCH_SITES_DEFAULT}
-_S_TEMP_TEMP= ${site:M*%SUBDIR%/*}
-. if empty(_S_TEMP_TEMP)
-PATCH_SITES_TMP+= ${site}
-. else
-. for dir in ${_PATCH_SITE_SUBDIR_DEFAULT}
-PATCH_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^}
-. endfor
-. endif
-. endfor
-. endif
-.else
-PATCH_SITES_TMP= ${_PATCH_SITES_DEFAULT:S^%SUBDIR%/^^}
-.endif
-_PATCH_SITES_DEFAULT:= ${PATCH_SITES_TMP}
-PATCH_SITES_TMP=
-
-# The primary backup site.
-MASTER_SITE_BACKUP?= \
- ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/
-MASTER_SITE_BACKUP:= ${MASTER_SITE_BACKUP:S^\${DIST_SUBDIR}/^^}
-
-# If the user has MASTER_SITE_FREEBSD set, go to the FreeBSD repository
-# for everything, but don't search it twice by appending it to the end.
-.if defined(MASTER_SITE_FREEBSD)
-_MASTER_SITE_OVERRIDE:= ${MASTER_SITE_BACKUP}
-_MASTER_SITE_BACKUP:= # empty
-.else
-_MASTER_SITE_OVERRIDE= ${MASTER_SITE_OVERRIDE}
-_MASTER_SITE_BACKUP= ${MASTER_SITE_BACKUP}
-.endif
-
-# Search CDROM first if mounted, symlink instead of copy if
-# FETCH_SYMLINK_DISTFILES is set
-.for MOUNTPT in ${CD_MOUNTPTS}
-.if exists(${MOUNTPT}/ports/distfiles)
-_MASTER_SITE_OVERRIDE:= file:${MOUNTPT}/ports/distfiles/${DIST_SUBDIR}/ ${_MASTER_SITE_OVERRIDE}
-.if defined(FETCH_SYMLINK_DISTFILES)
-FETCH_BEFORE_ARGS+= -l
-.endif
-.endif
-.endfor
-
-NOFETCHFILES?=
-
-# Organize DISTFILES, PATCHFILES, _MASTER_SITES_ALL, _PATCH_SITES_ALL
-# according to grouping rules (:something)
-DISTFILES?= ${DISTNAME}${EXTRACT_SUFX}
-_MASTER_SITES_ALL= ${_MASTER_SITES_DEFAULT}
-_PATCH_SITES_ALL= ${_PATCH_SITES_DEFAULT}
-_G_TEMP= DEFAULT
-.for _D in ${DISTFILES}
-_D_TEMP= ${_D:S/^${_D:C/:[^:]+$//}//}
-. if !empty(_D_TEMP)
-. for _group in ${_D_TEMP:S/^://:S/,/ /g}
-. if !defined(_MASTER_SITES_${_group})
-_G_TEMP_TEMP= ${_G_TEMP:M/${_group}/}
-. if empty(_G_TEMP_TEMP)
-_G_TEMP+= ${_group}
-_MASTER_SITES_ALL+= ${_MASTER_SITES_${_group}}
-. endif
-. endif
-. endfor
-_DISTFILES+= ${_D:C/:[^:]+$//}
-. else
-_DISTFILES+= ${_D}
-. endif
-.endfor
-_G_TEMP= DEFAULT
-.for _P in ${PATCHFILES}
-_P_TEMP= ${_P:S/^${_P:C/:[^:]+$//}//}
-. if !empty(_P_TEMP)
-. for _group in ${_P_TEMP:S/^://:S/,/ /g}
-. if !defined(_PATCH_SITES_${_group})
-_G_TEMP_TEMP= ${_G_TEMP:M/${_group}/}
-. if empty(_G_TEMP_TEMP)
-_G_TEMP+= ${_group}
-_PATCH_SITES_ALL+= ${_PATCH_SITES_${_group}}
-. endif
-. endif
-. endfor
-_PATCHFILES+= ${_P:C/:[^:]+$//}
-. else
-_PATCHFILES+= ${_P}
-. endif
-.endfor
-_G_TEMP=
-_G_TEMP_TEMP=
-ALLFILES?= ${_DISTFILES} ${_PATCHFILES}
-
-#
-# Sort the master site list according to the patterns in MASTER_SORT
-#
-MASTER_SORT?=
-MASTER_SORT_REGEX?=
-MASTER_SORT_REGEX+= ${MASTER_SORT:S|.|\\.|g:S|^|://[^/]*|:S|$|/|}
-
-MASTER_SORT_AWK= BEGIN { RS = " "; ORS = " "; IGNORECASE = 1 ; gl = "${MASTER_SORT_REGEX:S|\\|\\\\|g}"; }
-.for srt in ${MASTER_SORT_REGEX}
-MASTER_SORT_AWK+= /${srt:S|/|\\/|g}/ { good["${srt:S|\\|\\\\|g}"] = good["${srt:S|\\|\\\\|g}"] " " $$0 ; next; }
-.endfor
-MASTER_SORT_AWK+= { rest = rest " " $$0; } END { n=split(gl, gla); for(i=1;i<=n;i++) { print good[gla[i]]; } print rest; }
-
-SORTED_MASTER_SITES_DEFAULT_CMD= cd ${.CURDIR} && ${MAKE} master-sites-DEFAULT
-SORTED_PATCH_SITES_DEFAULT_CMD= cd ${.CURDIR} && ${MAKE} patch-sites-DEFAULT
-SORTED_MASTER_SITES_ALL_CMD= cd ${.CURDIR} && ${MAKE} master-sites-ALL
-SORTED_PATCH_SITES_ALL_CMD= cd ${.CURDIR} && ${MAKE} patch-sites-ALL
-
-#
-# Sort the master site list according to the patterns in MASTER_SORT
-# according to grouping rules (:something)
-#
-# for use in the fetch targets
-.for _S in ${MASTER_SITES}
-_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//}
-. if !empty(_S_TEMP)
-. for _group in ${_S_TEMP:S/^://:S/,/ /g}
-. if !target(master-sites-${_group})
-SORTED_MASTER_SITES_${_group}_CMD= cd ${.CURDIR} && ${MAKE} master-sites-${_group}
-master-sites-${_group}:
- @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_MASTER_SITES_${_group}}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
-. endif
-. endfor
-. endif
-.endfor
-.for _S in ${PATCH_SITES}
-_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//}
-. if !empty(_S_TEMP)
-. for _group in ${_S_TEMP:S/^://:S/,/ /g}
-. if !target(patch-sites-${_group})
-SORTED_PATCH_SITES_${_group}_CMD= cd ${.CURDIR} && ${MAKE} patch-sites-${_group}
-patch-sites-${_group}:
- @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_PATCH_SITES_${_group}}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
-. endif
-. endfor
-. endif
-.endfor
-
-#
-# Hackery to enable simple fetch targets with several dynamic MASTER_SITES
-#
-_MASTER_SITES_ENV= _MASTER_SITES_DEFAULT="${_MASTER_SITES_DEFAULT}"
-.for _F in ${DISTFILES}
-_F_TEMP= ${_F:S/^${_F:C/:[^:]+$//}//:S/^://}
-. if !empty(_F_TEMP)
-. for _group in ${_F_TEMP:S/,/ /g}
-. if defined(_MASTER_SITES_${_group})
-_MASTER_SITES_ENV+= _MASTER_SITES_${_group}="${_MASTER_SITES_${_group}}"
-. endif
-. endfor
-. endif
-.endfor
-_PATCH_SITES_ENV= _PATCH_SITES_DEFAULT="${_PATCH_SITES_DEFAULT}"
-.for _F in ${PATCHFILES}
-_F_TEMP= ${_F:S/^${_F:C/:[^:]+$//}//:S/^://}
-. if !empty(_F_TEMP)
-. for _group in ${_F_TEMP:S/,/ /g}
-. if defined(_PATCH_SITES_${_group})
-_PATCH_SITES_ENV+= _PATCH_SITES_${_group}="${_PATCH_SITES_${_group}}"
-. endif
-. endfor
-. endif
-.endfor
-
-master-sites-ALL:
- @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_MASTER_SITES_ALL}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
-patch-sites-ALL:
- @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_PATCH_SITES_ALL}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
-# has similar effect to old targets, i.e., access only {MASTER,PATCH}_SITES, not working with the new _n variables
-master-sites-DEFAULT:
- @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_MASTER_SITES_DEFAULT}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
-patch-sites-DEFAULT:
- @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_PATCH_SITES_DEFAULT}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
-
-# synonyms, mnemonics
-master-sites-all: master-sites-ALL
-patch-sites-all: patch-sites-ALL
-master-sites-default: master-sites-DEFAULT
-patch-sites-default: patch-sites-DEFAULT
-
-# compatibility with old behavior
-master-sites: master-sites-DEFAULT
-patch-sites: patch-sites-DEFAULT
-
-.if defined(IGNOREFILES)
-.if !defined(CKSUMFILES)
-CKSUMFILES!= \
- for file in ${ALLFILES}; do \
- ignore=0; \
- for tmp in ${IGNOREFILES}; do \
- if [ "$$file" = "$$tmp" ]; then \
- ignore=1; \
- fi; \
- done; \
- if [ "$$ignore" = 0 ]; then \
- ${ECHO_CMD} "$$file"; \
- fi; \
- done
-.endif
-.else
-CKSUMFILES= ${ALLFILES}
-.endif
-
-# List of all files, with ${DIST_SUBDIR} in front. Used for checksum.
-.if defined(DIST_SUBDIR)
-.if defined(CKSUMFILES) && ${CKSUMFILES}!=""
-_CKSUMFILES?= ${CKSUMFILES:S/^/${DIST_SUBDIR}\//}
-.endif
-.if defined(IGNOREFILES) && ${IGNOREFILES}!=""
-_IGNOREFILES?= ${IGNOREFILES:S/^/${DIST_SUBDIR}\//}
-.endif
-.else
-_CKSUMFILES?= ${CKSUMFILES}
-_IGNOREFILES?= ${IGNOREFILES}
-.endif
-
-# This is what is actually going to be extracted, and is overridable
-# by user.
-EXTRACT_ONLY?= ${_DISTFILES}
-
-.if !target(maintainer)
-maintainer:
- @${ECHO_CMD} "${MAINTAINER}"
-.endif
-
-.if !target(check-makefile)
-check-makefile::
- @${DO_NADA}
-.endif
-
-.if !defined(CATEGORIES)
-check-categories:
- @${ECHO_MSG} "${PKGNAME}: Makefile error: CATEGORIES is mandatory."
- @${FALSE}
-.else
-
-VALID_CATEGORIES+= accessibility afterstep arabic archivers astro audio \
- benchmarks biology cad chinese comms converters databases \
- deskutils devel docs dns editors elisp emulators enlightenment finance french ftp \
- games geography german gnome gnustep graphics hamradio haskell hebrew hungarian \
- ipv6 irc japanese java kde kld korean lang linux lisp \
- mail math mbone misc multimedia net net-im net-mgmt net-p2p news \
- palm parallel pear perl5 plan9 polish portuguese ports-mgmt \
- print python ruby rubygems russian \
- scheme science security shells spanish sysutils \
- tcl textproc tk \
- ukrainian vietnamese windowmaker www \
- x11 x11-clocks x11-drivers x11-fm x11-fonts x11-servers x11-themes \
- x11-toolkits x11-wm xfce zope
-
-check-categories:
-.for cat in ${CATEGORIES}
-. if empty(VALID_CATEGORIES:M${cat})
- @${ECHO_MSG} "${PKGNAME}: Makefile error: category ${cat} not in list of valid categories."; \
- ${FALSE};
-. endif
-.endfor
-.endif
-
-.if !target(check-makevars)
-check-makevars::
- @${DO_NADA}
-.endif
-
-.if !target(check-depends)
-check-depends:
- @${DO_NADA}
-.endif
-
-PKGREPOSITORYSUBDIR?= All
-PKGREPOSITORY?= ${PACKAGES}/${PKGREPOSITORYSUBDIR}
-.if exists(${PACKAGES})
-PKGFILE?= ${PKGREPOSITORY}/${PKGNAME}${PKG_SUFX}
-.else
-PKGFILE?= ${.CURDIR}/${PKGNAME}${PKG_SUFX}
-.endif
-
-# The "latest version" link -- ${PKGNAME} minus everthing after the last '-'
-PKGLATESTREPOSITORY?= ${PACKAGES}/Latest
-PKGBASE?= ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}
-LATEST_LINK?= ${PKGBASE}
-PKGLATESTFILE= ${PKGLATESTREPOSITORY}/${LATEST_LINK}${PKG_SUFX}
-
-CONFIGURE_SCRIPT?= configure
-CONFIGURE_TARGET?= ${ARCH}-portbld-freebsd${OSREL}
-CONFIGURE_TARGET:= ${CONFIGURE_TARGET:S/--build=//}
-CONFIGURE_LOG?= config.log
-
-# A default message to print if do-configure fails.
-CONFIGURE_FAIL_MESSAGE?= "Please report the problem to ${MAINTAINER} [maintainer] and attach the \"${CONFIGURE_WRKSRC}/${CONFIGURE_LOG}\" including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. an \`ls ${PKG_DBDIR}\`)."
-
-.if defined(GNU_CONFIGURE)
-# Maximum command line length
-.if !defined(CONFIGURE_MAX_CMD_LEN)
-CONFIGURE_MAX_CMD_LEN!= ${SYSCTL} -n kern.argmax
-.endif
-GNU_CONFIGURE_PREFIX?= ${PREFIX}
-CONFIGURE_ARGS+= --prefix=${GNU_CONFIGURE_PREFIX} $${_LATE_CONFIGURE_ARGS}
-CONFIGURE_ENV+= lt_cv_sys_max_cmd_len=${CONFIGURE_MAX_CMD_LEN}
-HAS_CONFIGURE= yes
-
-SET_LATE_CONFIGURE_ARGS= \
- _LATE_CONFIGURE_ARGS="" ; \
- if [ ! -z "`./${CONFIGURE_SCRIPT} --help 2>&1 | ${GREP} -- '--mandir'`" ]; then \
- _LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} --mandir=${MANPREFIX}/man" ; \
- fi ; \
- if [ ! -z "`./${CONFIGURE_SCRIPT} --help 2>&1 | ${GREP} -- '--infodir'`" ]; then \
- _LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} --infodir=${PREFIX}/${INFO_PATH}/${INFO_SUBDIR}" ; \
- fi ; \
- if [ -z "`./${CONFIGURE_SCRIPT} --version 2>&1 | ${EGREP} -i '(autoconf.*2\.13|Unrecognized option)'`" ]; then \
- _LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} --build=${CONFIGURE_TARGET}" ; \
- else \
- _LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} ${CONFIGURE_TARGET}" ; \
- fi ;
-.endif
-
-# Passed to most of script invocations
-SCRIPTS_ENV+= CURDIR=${MASTERDIR} DISTDIR=${DISTDIR} \
- WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} \
- SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \
- PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} LOCALBASE=${LOCALBASE}
-
-.if defined(BATCH)
-SCRIPTS_ENV+= BATCH=yes
-.endif
-
-.if ${PREFIX} == /usr
-MANPREFIX?= /usr/share
-.else
-MANPREFIX?= ${PREFIX}
-.endif
-
-.for sect in 1 2 3 4 5 6 7 8 9
-MAN${sect}PREFIX?= ${MANPREFIX}
-.endfor
-MANLPREFIX?= ${MANPREFIX}
-MANNPREFIX?= ${MANPREFIX}
-
-MANLANG?= "" # english only by default
-
-.if !defined(NO_MANCOMPRESS)
-MANEXT= .gz
-.endif
-
-.if (defined(MLINKS) || defined(_MLINKS_PREPEND)) && !defined(_MLINKS)
-__pmlinks!= ${ECHO_CMD} '${MLINKS:S/ / /}' | ${AWK} \
- '{ if (NF % 2 != 0) { print "broken"; exit; } \
- for (i=1; i<=NF; i++) { \
- if ($$i ~ /^-$$/ && i != 1 && i % 2 != 0) \
- { $$i = $$(i-2); printf " " $$i " "; } \
- else if ($$i ~ /^[^ ]+\.[1-9ln][^. ]*$$/ || $$i ~ /^\//) \
- printf " " $$i " "; \
- else \
- { print "broken"; exit; } \
- } \
- }' | ${SED} -e 's \([^/ ][^ ]*\.\(.\)[^. ]*\) $${MAN\2PREFIX}/$$$$$$$${__lang}/man\2/\1${MANEXT}g' -e 's/ //g' -e 's/MANlPREFIX/MANLPREFIX/g' -e 's/MANnPREFIX/MANNPREFIX/g'
-.if ${__pmlinks:Mbroken} == "broken"
-check-makevars::
- @${ECHO_MSG} "${PKGNAME}: Makefile error: unable to parse MLINKS."
- @${FALSE}
-.endif
-_MLINKS= ${_MLINKS_PREPEND}
-
-.for lang in ${MANLANG:S%^%man/%:S%^man/""$%man%}
-.for ___pmlinks in ${__pmlinks}
-.for __lang in ${lang}
-_MLINKS+= ${___pmlinks:S// /g}
-.endfor
-.endfor
-.endfor
-.endif
-_COUNT=0
-.for ___tpmlinks in ${_MLINKS}
-.if ${_COUNT} == "1"
-_TMLINKS+= ${___tpmlinks}
-_COUNT=0
-.else
-_COUNT=1
-.endif
-.endfor
-
-.for manlang in ${MANLANG:S%^%man/%:S%^man/""$%man%}
-
-.for sect in 1 2 3 4 5 6 7 8 9 L N
-# MAN${sect} is for man pages installed for all languages in MANLANG for a given
-# section.
-.if defined(MAN${sect})
-_MANPAGES+= ${MAN${sect}:S%^%${MAN${sect}PREFIX}/${manlang}/man${sect:L}/%}
-.endif
-
-# Language specific MAN${sect} variables are for man pages installed in that
-# language, but not necessarily all languages in MANLANG.
-.if defined(MAN${sect}_${manlang:S%^man/%%:U})
-_MANPAGES+= ${MAN${sect}_${manlang:S%^man/%%:U}:S%^%${MAN${sect}PREFIX}/${manlang}/man${sect:L}/%}
-.endif
-
-.endfor
-
-.endfor
-
-# Special case for English, since it is defined with "" in MANLANG rather than
-# a language name and does not have man pages installed in a lang subdirectory
-# of MAN${sect}PREFIX.
-.for sect in 1 2 3 4 5 6 7 8 9 L N
-.if defined(MAN${sect}_EN)
-_MANPAGES+= ${MAN${sect}_EN:S%^%${MAN${sect}PREFIX}/man/man${sect:L}/%}
-.endif
-.endfor
-
-.if !defined(_TMLINKS)
-_TMLINKS=
-.endif
-
-.if defined(_MANPAGES)
-
-.if defined(NO_MANCOMPRESS)
-__MANPAGES:= ${_MANPAGES:S%^${PREFIX}/%%}
-.else
-__MANPAGES:= ${_MANPAGES:S%^${PREFIX}/%%:S%$%.gz%}
-.endif
-
-.if ${MANCOMPRESSED} == "yes"
-_MANPAGES:= ${_MANPAGES:S%$%.gz%}
-.endif
-
-.endif
-
-.if ${PREFIX} == /usr
-INFO_PATH?= share/info
-.else
-INFO_PATH?= info
-.endif
-
-.if defined(INFO)
-. for D in ${INFO:H}
-RD:= ${D}
-. if ${RD} != "."
-. if !defined(INFO_SUBDIR)
-INFO_SUBDIR:= ${RD}
-. elif ${INFO_SUBDIR} != ${RD}
-BROKEN= only one subdirectory in INFO is allowed
-. endif
-. endif
-.undef RD
-. endfor
-.endif
-
-DOCSDIR_REL?= ${DOCSDIR:S,^${PREFIX}/,,}
-EXAMPLESDIR_REL?= ${EXAMPLESDIR:S,^${PREFIX}/,,}
-DATADIR_REL?= ${DATADIR:S,^${PREFIX}/,,}
-WWWDIR_REL?= ${WWWDIR:S,^${PREFIX}/,,}
-ETCDIR_REL?= ${ETCDIR:S,^${PREFIX}/,,}
-
-PLIST_SUB+= DOCSDIR="${DOCSDIR_REL}" \
- EXAMPLESDIR="${EXAMPLESDIR_REL}" \
- DATADIR="${DATADIR_REL}" \
- WWWDIR="${WWWDIR_REL}" \
- ETCDIR="${ETCDIR_REL}"
-
-DESKTOPDIR?= ${PREFIX}/share/applications
-_DESKTOPDIR_REL= ${DESKTOPDIR:S,^${PREFIX}/,,}/
-
-.if ${_DESKTOPDIR_REL} == ${DESKTOPDIR}/
-# DESKTOPDIR is not beneath PREFIX
-_DESKTOPDIR_REL=
-.endif
-
-.MAIN: all
-
-################################################################
-# Many ways to disable a port.
-#
-# If we're in BATCH mode and the port is interactive, or we're
-# in interactive mode and the port is non-interactive, skip all
-# the important targets. The reason we have two modes is that
-# one might want to leave a build in BATCH mode running
-# overnight, then come back in the morning and do _only_ the
-# interactive ones that required your intervention.
-#
-# Ignore ports that can't be resold if building for a CDROM.
-#
-# Don't build a port if it's restricted and we don't want to get
-# into that.
-#
-# Don't build a port if it's broken, unless we're running a parallel
-# build (in case it's fixed).
-#
-# Don't build a port if it's forbidden for whatever reason.
-#
-# Don't build a port if the system is too old.
-################################################################
-
-# Check the machine architectures
-.if defined(ONLY_FOR_ARCHS)
-.for __ARCH in ${ONLY_FOR_ARCHS}
-.if ${ARCH:M${__ARCH}} != ""
-__ARCH_OK?= 1
-.endif
-.endfor
-.else
-__ARCH_OK?= 1
-.endif
-
-.if defined(NOT_FOR_ARCHS)
-.for __NARCH in ${NOT_FOR_ARCHS}
-.if ${ARCH:M${__NARCH}} != ""
-.undef __ARCH_OK
-.endif
-.endfor
-.endif
-
-.if !defined(__ARCH_OK)
-.if defined(ONLY_FOR_ARCHS)
-IGNORE= is only for ${ONLY_FOR_ARCHS},
-.else # defined(NOT_FOR_ARCHS)
-IGNORE= does not run on ${NOT_FOR_ARCHS},
-.endif
-IGNORE+= while you are running ${ARCH}
-
-.if defined(ONLY_FOR_ARCHS_REASON_${ARCH})
-IGNORE+= (reason: ${ONLY_FOR_ARCHS_REASON_${ARCH}})
-.elif defined(ONLY_FOR_ARCHS_REASON)
-IGNORE+= (reason: ${ONLY_FOR_ARCHS_REASON})
-.endif
-
-.if defined(NOT_FOR_ARCHS_REASON_${ARCH})
-IGNORE+= (reason: ${NOT_FOR_ARCHS_REASON_${ARCH}})
-.elif defined(NOT_FOR_ARCHS_REASON)
-IGNORE+= (reason: ${NOT_FOR_ARCHS_REASON})
-.endif
-
-.endif
-
-# Check the user interaction and legal issues
-.if !defined(NO_IGNORE)
-.if (defined(IS_INTERACTIVE) && defined(BATCH))
-IGNORE= is an interactive port
-.elif (!defined(IS_INTERACTIVE) && defined(INTERACTIVE))
-IGNORE= is not an interactive port
-.elif (defined(NO_CDROM) && defined(FOR_CDROM))
-IGNORE= may not be placed on a CDROM: ${NO_CDROM}
-.elif (defined(RESTRICTED) && defined(NO_RESTRICTED))
-IGNORE= is restricted: ${RESTRICTED}
-.elif defined(BROKEN)
-.if !defined(TRYBROKEN)
-IGNORE= is marked as broken: ${BROKEN}
-.endif
-.elif defined(FORBIDDEN)
-IGNORE= is forbidden: ${FORBIDDEN}
-.endif
-
-.if (defined(MANUAL_PACKAGE_BUILD) && defined(PACKAGE_BUILDING))
-IGNORE= has to be built manually: ${MANUAL_PACKAGE_BUILD}
-clean:
- @${IGNORECMD}
-.endif
-
-.if defined(IGNORE)
-.if defined(IGNORE_SILENT)
-IGNORECMD= ${DO_NADA}
-.else
-IGNORECMD= ${ECHO_MSG} "===> ${PKGNAME} "${IGNORE:Q}.;exit 1
-.endif
-
-.for target in check-sanity fetch checksum extract patch configure all build install reinstall package
-.if !target(${target})
-${target}:
- @${IGNORECMD}
-.if defined(INSTALLS_DEPENDS)
- @${FALSE}
-.endif
-.endif
-.endfor
-
-.endif
-
-.endif
-
-.if defined(IGNORE) || defined(NO_PACKAGE)
-ignorelist: package-name
-.else
-ignorelist:
- @${DO_NADA}
-.endif
-
-.if defined(IGNORE) || defined(NO_PACKAGE)
-ignorelist-verbose:
-.if defined(IGNORE)
- @${ECHO_CMD} "${PKGNAME}|IGNORE: "${IGNORE:Q}
-.else
- @${ECHO_CMD} "${PKGNAME}|NO_PACKAGE: "${NO_PACKAGE:Q}
-.endif
-.else
-ignorelist-verbose:
- @${DO_NADA}
-.endif
-
-################################################################
-# Clean directories for ftp or CDROM.
-################################################################
-
-.if !defined(LICENSE)
-
-.if defined(RESTRICTED)
-clean-restricted: delete-distfiles delete-package
-clean-restricted-list: delete-distfiles-list delete-package-list
-RESTRICTED_FILES?= ${_DISTFILES} ${_PATCHFILES}
-.else
-clean-restricted:
-clean-restricted-list:
-.endif
-
-.if defined(NO_CDROM)
-clean-for-cdrom: delete-distfiles delete-package
-clean-for-cdrom-list: delete-distfiles-list delete-package-list
-RESTRICTED_FILES?= ${_DISTFILES} ${_PATCHFILES}
-.else
-clean-for-cdrom:
-clean-for-cdrom-list:
-.endif
-
-.endif # !defined(LICENSE)
-
-.if defined(ALL_HOOK)
-all:
- @cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTNAME=${DISTNAME} \
- DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} \
- PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
- FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
- BUILD_DEPENDS="${BUILD_DEPENDS}" RUN_DEPENDS="${RUN_DEPENDS}" \
- CONFLICTS="${CONFLICTS}" \
- ${ALL_HOOK}
-.endif
-
-.if !target(all)
-all: build
-.endif
-
-.if !defined(DEPENDS_TARGET)
-.if defined(DEPENDS_PRECLEAN)
-DEPENDS_TARGET= clean
-DEPENDS_ARGS= NOCLEANDEPENDS=yes
-.endif
-.if make(reinstall)
-DEPENDS_TARGET+= reinstall
-.else
-DEPENDS_TARGET+= install
-.endif
-.if defined(DEPENDS_CLEAN)
-DEPENDS_TARGET+= clean
-DEPENDS_ARGS+= NOCLEANDEPENDS=yes
-.endif
-.endif
-
-################################################################
-#
-# Do preliminary work to detect if we need to run the config
-# target or not.
-#
-################################################################
-.if (!defined(OPTIONS) || defined(CONFIG_DONE_${UNIQUENAME:U}) || \
- defined(PACKAGE_BUILDING) || defined(BATCH))
-_OPTIONS_OK=yes
-.endif
-
-################################################################
-# The following are used to create easy dummy targets for
-# disabling some bit of default target behavior you don't want.
-# They still check to see if the target exists, and if so don't
-# do anything, since you might want to set this globally for a
-# group of ports in a Makefile.inc, but still be able to
-# override from an individual Makefile.
-################################################################
-
-# Disable checksum
-.if defined(NO_CHECKSUM) && !target(checksum)
-checksum: fetch
- @${DO_NADA}
-.endif
-
-# Disable build
-.if defined(NO_BUILD) && !target(build)
-build: configure
- @${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
-.endif
-
-# Disable install
-.if defined(NO_INSTALL) && !target(do-install)
-do-install:
- @${DO_NADA}
-.endif
-
-# Disable package
-.if defined(NO_PACKAGE) && !target(package)
-package:
-.if defined(IGNORE_SILENT)
- @${DO_NADA}
-.else
- @${ECHO_MSG} "===> ${PKGNAME} may not be packaged: "${NO_PACKAGE:Q}.
-.endif
-.endif
-
-# Disable describe
-.if defined(NO_DESCRIBE) && !target(describe)
-describe:
- @${DO_NADA}
-.endif
-
-################################################################
-# More standard targets start here.
-#
-# These are the body of the build/install framework. If you are
-# not happy with the default actions, and you can't solve it by
-# adding pre-* or post-* targets/scripts, override these.
-################################################################
-
-# Pre-everything
-
-pre-everything::
- @${DO_NADA}
-
-buildanyway-message:
-.if defined(TRYBROKEN) && defined(BROKEN)
- @${ECHO_MSG} "Trying build of ${PKGNAME} even though it is marked BROKEN."
-.else
- @${DO_NADA}
-.endif
-
-options-message:
-.if defined(GNOME_OPTION_MSG) && (!defined(PACKAGE_BUILDING) || !defined(BATCH))
- @for m in ${GNOME_OPTION_MSG}; do \
- ${ECHO_MSG} $$m; \
- done
-.else
- @${DO_NADA}
-.endif
-.if defined(_OPTIONS_READ)
- @${ECHO_MSG} "===> Found saved configuration for ${_OPTIONS_READ}"
-.endif
-
-
-# Warn user about deprecated packages. Advisory only.
-
-.if !target(check-deprecated)
-check-deprecated:
-.if defined(DEPRECATED)
- @${ECHO_MSG} "===> NOTICE:"
- @${ECHO_MSG}
- @${ECHO_MSG} "This port is deprecated; you may wish to reconsider installing it:"
- @${ECHO_MSG}
- @${ECHO_MSG} ${DEPRECATED:Q}.
- @${ECHO_MSG}
-.if defined(EXPIRATION_DATE)
- @${ECHO_MSG} "It is scheduled to be removed on or after ${EXPIRATION_DATE}."
- @${ECHO_MSG}
-.endif
-.endif
-.endif
-
-# Check if the port is listed in the vulnerability database
-
-.if defined(WITH_PKGNG)
-AUDITFILE?= ${PKG_DBDIR}/auditfile
-_EXTRACT_AUDITFILE= ${CAT} "${AUDITFILE}"
-.else
-AUDITFILE?= /var/db/portaudit/auditfile.tbz
-_EXTRACT_AUDITFILE= ${TAR} -jxOf "${AUDITFILE}" auditfile
-.endif
-
-check-vulnerable:
-.if !defined(DISABLE_VULNERABILITIES) && !defined(PACKAGE_BUILDING)
- @if [ -f "${AUDITFILE}" ]; then \
- if [ -n "${WITH_PKGNG}" ]; then \
- vlist=`${PKG_BIN} audit "${PKGNAME}"`; \
- elif [ -x "${LOCALBASE}/sbin/portaudit" ]; then \
- vlist=`${LOCALBASE}/sbin/portaudit -X 14 "${PKGNAME}" \
- 2>&1 | grep -vE '^[0-9]+ problem\(s\) found.' \
- || true`; \
- else \
- ${ECHO_MSG} "===> portaudit database exists, however, portaudit is not installed!"; \
- fi; \
- if [ -n "$$vlist" ]; then \
- ${ECHO_MSG} "===> ${PKGNAME} has known vulnerabilities:"; \
- ${ECHO_MSG} "$$vlist"; \
- ${ECHO_MSG} "=> Please update your ports tree and try again."; \
- exit 1; \
- fi; \
- fi
-.endif
-
-# set alg to any of SIZE, SHA256 (or any other checksum algorithm):
-DISTINFO_DATA?= if [ \( -n "${DISABLE_SIZE}" -a -n "${NO_CHECKSUM}" \) -o ! -f "${DISTINFO_FILE}" ]; then exit; fi; \
- DIR=${DIST_SUBDIR}; ${AWK} -v alg=$$alg -v file=$${DIR:+$$DIR/}$${file} \
- '$$1 == alg && $$2 == "(" file ")" {print $$4}' ${DISTINFO_FILE}
-
-# Fetch
-
-.if !target(do-fetch)
-do-fetch:
- @${MKDIR} ${_DISTDIR}
- @cd ${_DISTDIR};\
- ${_MASTER_SITES_ENV} ; \
- for _file in ${DISTFILES}; do \
- file=$${_file%%:*}; \
- if [ $$_file = $$file ]; then \
- select=''; \
- else \
- select=`${ECHO_CMD} $${_file##*:} | ${SED} -e 's/,/ /g'` ; \
- fi; \
- force_fetch=false; \
- filebasename=$${file##*/}; \
- for afile in ${FORCE_FETCH}; do \
- afile=$${afile##*/}; \
- if [ "x$$afile" = "x$$filebasename" ]; then \
- force_fetch=true; \
- fi; \
- done; \
- if [ ! -f $$file -a ! -f $$filebasename -o "$$force_fetch" = "true" ]; then \
- if [ -L $$file -o -L $$filebasename ]; then \
- ${ECHO_MSG} "=> ${_DISTDIR}/$$file is a broken symlink."; \
- ${ECHO_MSG} "=> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
- ${ECHO_MSG} "=> Please correct this problem and try again."; \
- exit 1; \
- fi; \
- if [ -f ${DISTINFO_FILE} -a "x${NO_CHECKSUM}" = "x" ]; then \
- _sha256sum=`alg=SHA256; ${DISTINFO_DATA}`; \
- if [ -z "$$_sha256sum" ]; then \
- ${ECHO_MSG} "=> $${DIR:+$$DIR/}$$file is not in ${DISTINFO_FILE}."; \
- ${ECHO_MSG} "=> Either ${DISTINFO_FILE} is out of date, or"; \
- ${ECHO_MSG} "=> $${DIR:+$$DIR/}$$file is spelled incorrectly."; \
- exit 1; \
- fi; \
- fi; \
- ${ECHO_MSG} "=> $$file doesn't seem to exist in ${_DISTDIR}."; \
- if [ ! -w ${DISTDIR} ]; then \
- ${ECHO_MSG} "=> ${DISTDIR} is not writable by you; cannot fetch."; \
- exit 1; \
- fi; \
- if [ ! -z "$$select" ] ; then \
- __MASTER_SITES_TMP= ; \
- for group in $$select; do \
- if [ ! -z \$${_MASTER_SITES_$${group}} ] ; then \
- eval ___MASTER_SITES_TMP="\$${_MASTER_SITES_$${group}}" ; \
- __MASTER_SITES_TMP="$${__MASTER_SITES_TMP} $${___MASTER_SITES_TMP}" ; \
- fi; \
- done; \
- ___MASTER_SITES_TMP= ; \
- SORTED_MASTER_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__MASTER_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
- else \
- SORTED_MASTER_SITES_CMD_TMP="${SORTED_MASTER_SITES_DEFAULT_CMD}" ; \
- fi; \
- for site in `eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \
- ${ECHO_MSG} "=> Attempting to fetch $${site}$${file}"; \
- CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \
- case $${file} in \
- */*) ${MKDIR} $${file%/*}; \
- args="-o $${file} $${site}$${file}";; \
- *) args=$${site}$${file};; \
- esac; \
- if ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} ${FETCH_AFTER_ARGS}; then \
- continue 2; \
- fi; \
- done; \
- ${ECHO_MSG} "=> Couldn't fetch it - please try to retrieve this";\
- ${ECHO_MSG} "=> port manually into ${_DISTDIR} and try again."; \
- exit 1; \
- fi; \
- done
-.if defined(PATCHFILES)
- @cd ${_DISTDIR};\
- ${_PATCH_SITES_ENV} ; \
- for _file in ${PATCHFILES}; do \
- file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \
- select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \
- force_fetch=false; \
- filebasename=$${file##*/}; \
- for afile in ${FORCE_FETCH}; do \
- afile=$${afile##*/}; \
- if [ "x$$afile" = "x$$filebasename" ]; then \
- force_fetch=true; \
- fi; \
- done; \
- if [ ! -f $$file -a ! -f $$filebasename -o "$$force_fetch" = "true" ]; then \
- if [ -L $$file -o -L $${file##*/} ]; then \
- ${ECHO_MSG} "=> ${_DISTDIR}/$$file is a broken symlink."; \
- ${ECHO_MSG} "=> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
- ${ECHO_MSG} "=> Please correct this problem and try again."; \
- exit 1; \
- fi; \
- ${ECHO_MSG} "=> $$file doesn't seem to exist in ${_DISTDIR}."; \
- if [ ! -z "$$select" ] ; then \
- __PATCH_SITES_TMP= ; \
- for group in $$select; do \
- if [ ! -z \$${_PATCH_SITES_$${group}} ] ; then \
- eval ___PATCH_SITES_TMP="\$${_PATCH_SITES_$${group}}" ; \
- __PATCH_SITES_TMP="$${__PATCH_SITES_TMP} $${___PATCH_SITES_TMP}" ; \
- fi; \
- done; \
- ___PATCH_SITES_TMP= ; \
- SORTED_PATCH_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__PATCH_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
- else \
- SORTED_PATCH_SITES_CMD_TMP="${SORTED_PATCH_SITES_DEFAULT_CMD}" ; \
- fi; \
- for site in `eval $$SORTED_PATCH_SITES_CMD_TMP`; do \
- ${ECHO_MSG} "=> Attempting to fetch $${site}$${file}"; \
- CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \
- case $${file} in \
- */*) ${MKDIR} $${file%/*}; \
- args="-o $${file} $${site}$${file}";; \
- *) args=$${site}$${file};; \
- esac; \
- if ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} ${FETCH_AFTER_ARGS}; then \
- continue 2; \
- fi; \
- done; \
- ${ECHO_MSG} "=> Couldn't fetch it - please try to retrieve this";\
- ${ECHO_MSG} "=> port manually into ${_DISTDIR} and try again."; \
- exit 1; \
- fi; \
- done
-.endif
-.endif
-
-# Extract
-
-.if !target(do-extract)
-do-extract:
- @${RM} -rf ${WRKDIR}
- @${MKDIR} ${WRKDIR}
- @for file in ${EXTRACT_ONLY}; do \
- if ! (cd ${WRKDIR} && ${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${_DISTDIR}/$$file ${EXTRACT_AFTER_ARGS});\
- then \
- exit 1; \
- fi; \
- done
-.if !defined(EXTRACT_PRESERVE_OWNERSHIP)
- @if [ ${UID} = 0 ]; then \
- ${CHMOD} -R ug-s ${WRKDIR}; \
- ${CHOWN} -R 0:0 ${WRKDIR}; \
- fi
-.endif
-.endif
-
-# Patch
-
-.if !target(patch-dos2unix)
-patch-dos2unix:
-.if defined(USE_DOS2UNIX)
-.if ${USE_DOS2UNIX:U}=="YES"
- @${ECHO_MSG} "===> Converting DOS text files to UNIX text files"
- @${FIND} -E ${WRKSRC} -type f -iregex '${DOS2UNIX_REGEX}' -print0 | \
- ${XARGS} -0 ${REINPLACE_CMD} -i '' -e 's/
$$//'
-.else
- @${ECHO_MSG} "===> Converting DOS text file to UNIX text file: ${f}"
-.if ${USE_DOS2UNIX:M*/*}
-.for f in ${USE_DOS2UNIX}
- @${REINPLACE_CMD} -i '' -e 's/
$$//' ${WRKSRC}/${f}
-.endfor
-.else
-.for f in ${USE_DOS2UNIX}
- @${FIND} ${WRKSRC} -type f -name '${f}' -print0 | \
- ${XARGS} -0 ${REINPLACE_CMD} -i '' -e 's/
$$//'
-.endfor
-.endif
-.endif
-.else
- @${DO_NADA}
-.endif
-.endif
-
-.if !target(do-patch)
-do-patch:
-.if defined(PATCHFILES)
- @${ECHO_MSG} "===> Applying distribution patches for ${PKGNAME}"
- @(cd ${_DISTDIR}; \
- for i in ${_PATCHFILES}; do \
- if [ ${PATCH_DEBUG_TMP} = yes ]; then \
- ${ECHO_MSG} "===> Applying distribution patch $$i" ; \
- fi; \
- case $$i in \
- *.Z|*.gz) \
- ${GZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS}; \
- ;; \
- *.bz2) \
- ${BZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS}; \
- ;; \
- *) \
- ${PATCH} ${PATCH_DIST_ARGS} < $$i; \
- ;; \
- esac; \
- done)
-.endif
-.if defined(EXTRA_PATCHES)
- @for i in ${EXTRA_PATCHES}; do \
- ${ECHO_MSG} "===> Applying extra patch $$i"; \
- ${PATCH} ${PATCH_ARGS} < $$i; \
- done
-.endif
- @if [ -d ${PATCHDIR} ]; then \
- if [ "`${ECHO_CMD} ${PATCHDIR}/patch-*`" != "${PATCHDIR}/patch-*" ]; then \
- ${ECHO_MSG} "===> Applying ${OPSYS} patches for ${PKGNAME}" ; \
- PATCHES_APPLIED="" ; \
- for i in ${PATCHDIR}/patch-*; do \
- case $$i in \
- *.orig|*.rej|*~|*,v) \
- ${ECHO_MSG} "===> Ignoring patchfile $$i" ; \
- ;; \
- *) \
- if [ ${PATCH_DEBUG_TMP} = yes ]; then \
- ${ECHO_MSG} "===> Applying ${OPSYS} patch $$i" ; \
- fi; \
- if ${PATCH} ${PATCH_ARGS} < $$i ; then \
- PATCHES_APPLIED="$$PATCHES_APPLIED $$i" ; \
- else \
- ${ECHO_MSG} `${ECHO_CMD} "=> Patch $$i failed to apply cleanly." | ${SED} "s|${PATCHDIR}/||"` ; \
- if [ x"$$PATCHES_APPLIED" != x"" ]; then \
- ${ECHO_MSG} `${ECHO_CMD} "=> Patch(es) $$PATCHES_APPLIED applied cleanly." | ${SED} "s|${PATCHDIR}/||g"` ; \
- fi; \
- ${FALSE} ; \
- fi; \
- ;; \
- esac; \
- done; \
- fi; \
- fi
-.endif
-
-.if !target(run-autotools-fixup)
-run-autotools-fixup:
-# Work around an issue where FreeBSD 10.0 is detected as FreeBSD 1.x.
-.if ${OSVERSION} >= 1000000 && !defined(WITHOUT_FBSD10_FIX)
- -@for f in `${FIND} ${WRKDIR} -type f \( -name config.libpath -o \
- -name config.rpath -o -name configure -o -name libtool.m4 -o \
- -name ltconfig -o -name libtool -o -name aclocal.m4 -o \
- -name acinclude.m4 \)` ; do \
- ${SED} -i.fbsd10bak \
- -e 's|freebsd1\*)|freebsd1.\*)|g' \
- -e 's|freebsd\[12\]\*)|freebsd[12].*)|g' \
- -e 's|freebsd\[123\]\*)|freebsd[123].*)|g' \
- -e 's|freebsd\[\[12\]\]\*)|freebsd[[12]].*)|g' \
- -e 's|freebsd\[\[123\]\]\*)|freebsd[[123]].*)|g' \
- $${f} ; \
- ${TOUCH} ${TOUCH_FLAGS} -mr $${f}.fbsd10bak $${f} ; \
- ${RM} -f $${f}.fbsd10bak ; \
- ${ECHO_MSG} "===> FreeBSD 10 autotools fix applied to $${f}"; \
- done
-.endif
-.endif
-
-.if !target(configure-autotools)
-configure-autotools:
- @${DO_NADA}
-.endif
-
-.if !target(run-autotools)
-run-autotools:
- @${DO_NADA}
-.endif
-
-# Configure
-
-.if !target(do-configure)
-do-configure:
- @if [ -f ${SCRIPTDIR}/configure ]; then \
- cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
- ${SCRIPTDIR}/configure; \
- fi
-.if defined(GNU_CONFIGURE)
- @CONFIG_GUESS_DIRS=$$(${FIND} ${WRKDIR} -name config.guess -o -name config.sub \
- | ${XARGS} -n 1 ${DIRNAME}); \
- for _D in $${CONFIG_GUESS_DIRS}; do \
- ${CP} -f ${TEMPLATES}/config.guess $${_D}/config.guess; \
- ${CHMOD} a+rx $${_D}/config.guess; \
- ${CP} -f ${TEMPLATES}/config.sub $${_D}/config.sub; \
- ${CHMOD} a+rx $${_D}/config.sub; \
- done
-.endif
-.if defined(HAS_CONFIGURE)
- @(cd ${CONFIGURE_WRKSRC} && \
- ${SET_LATE_CONFIGURE_ARGS} \
- if ! ${SETENV} CC="${CC}" CPP="${CPP}" CXX="${CXX}" \
- CFLAGS="${CFLAGS}" CPPFLAGS="${CPPFLAGS}" CXXFLAGS="${CXXFLAGS}" \
- LDFLAGS="${LDFLAGS}" \
- INSTALL="/usr/bin/install -c ${_BINOWNGRP}" \
- INSTALL_DATA="${INSTALL_DATA}" \
- INSTALL_LIB="${INSTALL_LIB}" \
- INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
- INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
- ${CONFIGURE_ENV} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}; then \
- ${ECHO_MSG} "===> Script \"${CONFIGURE_SCRIPT}\" failed unexpectedly."; \
- (${ECHO_CMD} ${CONFIGURE_FAIL_MESSAGE}) | ${FMT} 75 79 ; \
- ${FALSE}; \
- fi)
-.endif
-.if defined(USE_IMAKE)
- @(cd ${CONFIGURE_WRKSRC}; ${SETENV} ${MAKE_ENV} ${XMKMF})
-.endif
-.endif
-
-# Build
-
-.if !target(do-build)
-do-build:
-.if defined(USE_GMAKE)
- @(cd ${BUILD_WRKSRC}; if ! ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${_MAKE_JOBS} ${MAKE_ARGS} ${ALL_TARGET}; then \
- if [ x != x${BUILD_FAIL_MESSAGE} ] ; then \
- ${ECHO_MSG} "===> Compilation failed unexpectedly."; \
- (${ECHO_CMD} ${BUILD_FAIL_MESSAGE}) | ${FMT} 75 79 ; \
- fi; \
- ${FALSE}; \
- fi)
-.else
- @(cd ${BUILD_WRKSRC}; if ! ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${_MAKE_JOBS} ${MAKE_ARGS} ${ALL_TARGET}; then \
- if [ x != x${BUILD_FAIL_MESSAGE} ] ; then \
- ${ECHO_MSG} "===> Compilation failed unexpectedly."; \
- (${ECHO_CMD} ${BUILD_FAIL_MESSAGE}) | ${FMT} 75 79 ; \
- fi; \
- ${FALSE}; \
- fi)
-.endif
-.endif
-
-# Check conflicts
-
-.if !target(check-conflicts)
-check-conflicts: check-build-conflicts check-install-conflicts
-.endif
-
-.if !target(check-build-conflicts)
-check-build-conflicts:
-.if ( defined(CONFLICTS) || defined(CONFLICTS_BUILD) ) && !defined(DISABLE_CONFLICTS) && !defined(DEFER_CONFLICTS_CHECK)
- @found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_BUILD:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \
- conflicts_with=; \
- for entry in $${found}; do \
- if ${PKG_INFO} -e $${entry} ; then \
- prfx=`${PKG_INFO} -q -p "$${entry}" 2> /dev/null | ${SED} -ne '1s/^@cwd //p'`; \
- orgn=`${PKG_INFO} -q -o "$${entry}" 2> /dev/null`; \
- if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \
- conflicts_with="$${conflicts_with} $${entry}"; \
- fi; \
- fi; \
- done; \
- if [ -n "$${conflicts_with}" ]; then \
- ${ECHO_MSG}; \
- ${ECHO_MSG} "===> ${PKGNAME} conflicts with installed package(s): "; \
- for entry in $${conflicts_with}; do \
- ${ECHO_MSG} " $${entry}"; \
- done; \
- ${ECHO_MSG}; \
- ${ECHO_MSG} " They will not build together."; \
- ${ECHO_MSG} " Please remove them first with pkg_delete(1)."; \
- exit 1; \
- fi
-.endif
-.endif
-
-.if !target(identify-install-conflicts)
-identify-install-conflicts:
-.if ( defined(CONFLICTS) || defined(CONFLICTS_INSTALL) ) && !defined(DISABLE_CONFLICTS)
- @found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_INSTALL:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \
- conflicts_with=; \
- for entry in $${found}; do \
- if ${PKG_INFO} -e $${entry} ; then \
- prfx=`${PKG_INFO} -q -p "$${entry}" 2> /dev/null | ${SED} -ne '1s/^@cwd //p'`; \
- orgn=`${PKG_INFO} -q -o "$${entry}" 2> /dev/null`; \
- if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \
- conflicts_with="$${conflicts_with} $${entry}"; \
- fi; \
- fi; \
- done; \
- if [ -n "$${conflicts_with}" ]; then \
- ${ECHO_MSG}; \
- ${ECHO_MSG} "===> ${PKGNAME} conflicts with installed package(s): "; \
- for entry in $${conflicts_with}; do \
- ${ECHO_MSG} " $${entry}"; \
- done; \
- ${ECHO_MSG}; \
- ${ECHO_MSG} " They install files into the same place."; \
- ${ECHO_MSG} " You may want to stop build with Ctrl + C."; \
- sleep 10; \
- fi
-.endif
-.endif
-
-.if !target(check-install-conflicts)
-check-install-conflicts:
-.if ( defined(CONFLICTS) || defined(CONFLICTS_INSTALL) || ( defined(CONFLICTS_BUILD) && defined(DEFER_CONFLICTS_CHECK) ) ) && !defined(DISABLE_CONFLICTS)
-.if defined(DEFER_CONFLICTS_CHECK)
- @found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_BUILD:C/.+/'&'/} ${CONFLICTS_INSTALL:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \
- conflicts_with=; \
- for entry in $${found}; do \
- if ${PKG_INFO} -e $${entry} ; then \
- prfx=`${PKG_INFO} -q -p "$${entry}" 2> /dev/null | ${SED} -ne '1s/^@cwd //p'`; \
- orgn=`${PKG_INFO} -q -o "$${entry}" 2> /dev/null`; \
- if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \
- conflicts_with="$${conflicts_with} $${entry}"; \
- fi; \
- fi; \
- done; \
- if [ -n "$${conflicts_with}" ]; then \
- ${ECHO_MSG}; \
- ${ECHO_MSG} "===> ${PKGNAME} conflicts with installed package(s): "; \
- for entry in $${conflicts_with}; do \
- ${ECHO_MSG} " $${entry}"; \
- done; \
- ${ECHO_MSG}; \
- ${ECHO_MSG} " Please remove them first with pkg_delete(1)."; \
- exit 1; \
- fi
-.else
- @found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_INSTALL:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \
- conflicts_with=; \
- for entry in $${found}; do \
- if ${PKG_INFO} -e $${entry} ; then \
- prfx=`${PKG_INFO} -q -p "$${entry}" 2> /dev/null | ${SED} -ne '1s/^@cwd //p'`; \
- orgn=`${PKG_INFO} -q -o "$${entry}" 2> /dev/null`; \
- if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \
- conflicts_with="$${conflicts_with} $${entry}"; \
- fi; \
- fi; \
- done; \
- if [ -n "$${conflicts_with}" ]; then \
- ${ECHO_MSG}; \
- ${ECHO_MSG} "===> ${PKGNAME} conflicts with installed package(s): "; \
- for entry in $${conflicts_with}; do \
- ${ECHO_MSG} " $${entry}"; \
- done; \
- ${ECHO_MSG}; \
- ${ECHO_MSG} " They install files into the same place."; \
- ${ECHO_MSG} " Please remove them first with pkg_delete(1)."; \
- exit 1; \
- fi
-.endif # defined(DEFER_CONFLICTS_CHECK)
-.endif
-.endif
-
-# Install
-
-.if !target(do-install)
-do-install:
-.if defined(USE_GMAKE)
- @(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${INSTALL_TARGET})
-.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
- @(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} install.man)
-.endif
-.else # !defined(USE_GMAKE)
- @(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${INSTALL_TARGET})
-.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
- @(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} install.man)
-.endif
-.endif
-.endif
-
-# Package
-
-.if !target(do-package)
-do-package: ${TMPPLIST}
- @if [ -d ${PACKAGES} ]; then \
- if [ ! -d ${PKGREPOSITORY} ]; then \
- if ! ${MKDIR} ${PKGREPOSITORY}; then \
- ${ECHO_MSG} "=> Can't create directory ${PKGREPOSITORY}."; \
- exit 1; \
- fi; \
- fi; \
- fi
- @if ${PKG_CMD} -b ${PKGNAME} ${PKGFILE}; then \
- if [ -d ${PACKAGES} ]; then \
- cd ${.CURDIR} && eval ${MAKE} package-links; \
- fi; \
- else \
- cd ${.CURDIR} && eval ${MAKE} delete-package; \
- exit 1; \
- fi
-.endif
-
-# Some support rules for do-package
-
-.if !target(package-links)
-package-links: delete-package-links
- @for cat in ${CATEGORIES}; do \
- if [ ! -d ${PACKAGES}/$$cat ]; then \
- if ! ${MKDIR} ${PACKAGES}/$$cat; then \
- ${ECHO_MSG} "=> Can't create directory ${PACKAGES}/$$cat."; \
- exit 1; \
- fi; \
- fi; \
- ${LN} -sf `${ECHO_CMD} $$cat | ${SED} -e 'sa[^/]*a..ag'`/${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PACKAGES}/$$cat; \
- done
-.if !defined(NO_LATEST_LINK)
- @if [ ! -d ${PKGLATESTREPOSITORY} ]; then \
- if ! ${MKDIR} ${PKGLATESTREPOSITORY}; then \
- ${ECHO_MSG} "=> Can't create directory ${PKGLATESTREPOSITORY}."; \
- exit 1; \
- fi; \
- fi
- @${LN} -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PKGLATESTFILE}
-.endif
-.endif
-
-.if !target(delete-package-links)
-delete-package-links:
- @for cat in ${CATEGORIES}; do \
- ${RM} -f ${PACKAGES}/$$cat/${PKGNAME}${PKG_SUFX}; \
- done
-.if !defined(NO_LATEST_LINK)
- @${RM} -f ${PKGLATESTFILE}
-.endif
-.endif
-
-.if !target(delete-package)
-delete-package: delete-package-links
- @${RM} -f ${PKGFILE}
-.endif
-
-.if !target(delete-package-links-list)
-delete-package-links-list:
- @for cat in ${CATEGORIES}; do \
- ${ECHO_CMD} ${RM} -f ${PACKAGES}/$$cat/${PKGNAME}${PKG_SUFX}; \
- done
-.if !defined(NO_LATEST_LINK)
- @${ECHO_CMD} ${RM} -f ${PKGLATESTFILE}
-.endif
-.endif
-
-.if !target(delete-package-list)
-delete-package-list: delete-package-links-list
- @${ECHO_CMD} "[ -f ${PKGFILE} ] && (${ECHO_CMD} deleting ${PKGFILE}; ${RM} -f ${PKGFILE})"
-.endif
-
-# Utility targets follow
-
-.if !target(check-already-installed)
-check-already-installed: ${TMPPLIST_SORT}
-.if !defined(NO_PKG_REGISTER) && !defined(FORCE_PKG_REGISTER)
- @${ECHO_MSG} "===> Checking if ${PKGORIGIN} already installed"; \
- ${MKDIR} ${PKG_DBDIR}; \
- already_installed=`${PKG_INFO} -q -O ${PKGORIGIN}`; \
- if [ -n "$${already_installed}" ]; then \
- for p in $${already_installed}; do \
- prfx=`${PKG_INFO} -q -p $${p} 2> /dev/null | ${SED} -ne '1s|^@cwd ||p'`; \
- if [ "x${PREFIX}" = "x$${prfx}" ]; then \
- df=`${PKG_INFO} -q -f $${p} 2> /dev/null | ${GREP} -v "^@" | ${SORT} -u | ${COMM} -12 - ${TMPPLIST_SORT}`; \
- if [ -n "$${df}" ]; then \
- found_package=$${p}; \
- break; \
- fi; \
- fi; \
- done; \
- fi; \
- if [ -d ${PKG_DBDIR}/${PKGNAME} -o -n "$${found_package}" ]; then \
- if [ -d ${PKG_DBDIR}/${PKGNAME} ]; then \
- ${ECHO_CMD} "===> ${PKGNAME} is already installed"; \
- else \
- ${ECHO_CMD} "===> An older version of ${PKGORIGIN} is already installed ($${found_package})"; \
- fi; \
- ${ECHO_MSG} " You may wish to \`\`make deinstall'' and install this port again"; \
- ${ECHO_MSG} " by \`\`make reinstall'' to upgrade it properly."; \
- ${ECHO_MSG} " If you really wish to overwrite the old port of ${PKGORIGIN}"; \
- ${ECHO_MSG} " without deleting it first, set the variable \"FORCE_PKG_REGISTER\""; \
- ${ECHO_MSG} " in your environment or the \"make install\" command line."; \
- exit 1; \
- fi
-.else
- @${DO_NADA}
-.endif
-.endif
-
-.if !target(check-umask)
-check-umask:
- @if [ `${SH} -c umask` != 0022 ]; then \
- ${ECHO_MSG} "===> Warning: your umask is \"`${SH} -c umask`"\".; \
- ${ECHO_MSG} " If this is not desired, set it to an appropriate value"; \
- ${ECHO_MSG} " and install this port again by \`\`make reinstall''."; \
- fi
-.endif
-
-.if !target(install-mtree)
-install-mtree:
- @${MKDIR} ${PREFIX}
- @if [ ${UID} != 0 ]; then \
- if [ -w ${PREFIX}/ ]; then \
- ${ECHO_MSG} "Warning: not superuser, you may get some errors during installation."; \
- else \
- ${ECHO_MSG} "Error: ${PREFIX}/ not writable."; \
- ${FALSE}; \
- fi; \
- fi
-.if !defined(NO_MTREE)
- @if [ ${UID} = 0 ]; then \
- if [ ! -f ${MTREE_FILE} ]; then \
- ${ECHO_MSG} "Error: mtree file \"${MTREE_FILE}\" is missing."; \
- ${ECHO_MSG} "Copy it from a suitable location (e.g., ${SRC_BASE}/etc/mtree) and try again."; \
- exit 1; \
- else \
- ${MTREE_CMD} ${MTREE_ARGS} ${PREFIX}/ >/dev/null; \
- if [ ${PREFIX} = ${LOCALBASE} -a "${MTREE_FILE_DEFAULT}" = "yes" ]; then \
- cd ${PREFIX}/share/nls; \
- for link in POSIX en_US.US-ASCII; \
- do \
- if [ x"`${READLINK_CMD} $${link}`" != x"C" ]; \
- then \
- ${LN} -shf C $${link}; \
- fi; \
- done; \
- fi; \
- fi; \
- else \
- ${ECHO_MSG} "Warning: not superuser, can't run mtree."; \
- ${ECHO_MSG} "You may want to become root and try again to ensure correct permissions."; \
- fi
-.endif
-.endif
-
-.if !target(install-ldconfig-file)
-install-ldconfig-file:
-.if defined(USE_LDCONFIG) || defined(USE_LDCONFIG32)
-.if defined(USE_LDCONFIG)
-.if defined(USE_LINUX_PREFIX)
- @${ECHO_MSG} "===> Running linux ldconfig"
- ${LDCONFIG_CMD}
-.else
-.if !defined(INSTALL_AS_USER)
- @${ECHO_MSG} "===> Running ldconfig"
- ${LDCONFIG} -m ${USE_LDCONFIG}
-.else
- @${ECHO_MSG} "===> Running ldconfig (errors are ignored)"
- -${LDCONFIG} -m ${USE_LDCONFIG}
-.endif
-.if ${USE_LDCONFIG} != "${PREFIX}/lib" && !defined(INSTALL_AS_USER)
- @${ECHO_MSG} "===> Installing ldconfig configuration file"
-.if defined(NO_LDCONFIG_MTREE)
- @${MKDIR} ${PREFIX}/${LDCONFIG_DIR}
-.endif
- @${ECHO_CMD} ${USE_LDCONFIG} | ${TR} ' ' '\n' \
- > ${PREFIX}/${LDCONFIG_DIR}/${UNIQUENAME}
- @${ECHO_CMD} "@cwd" >> ${TMPPLIST}
- @${ECHO_CMD} ${LDCONFIG_DIR}/${UNIQUENAME} >> ${TMPPLIST}
-.if defined(NO_LDCONFIG_MTREE)
- @${ECHO_CMD} "@unexec rmdir ${LDCONFIG_DIR} >/dev/null 2>&1 || true" >> ${TMPPLIST}
-.endif
-.endif
-.endif
-.endif
-.if defined(USE_LDCONFIG32)
-.if !defined(INSTALL_AS_USER)
- @${ECHO_MSG} "===> Running ldconfig"
- ${LDCONFIG} -32 -m ${USE_LDCONFIG32}
-.else
- @${ECHO_MSG} "===> Running ldconfig (errors are ignored)"
- -${LDCONFIG} -32 -m ${USE_LDCONFIG32}
-.endif
-.if !defined(INSTALL_AS_USER)
- @${ECHO_MSG} "===> Installing 32-bit ldconfig configuration file"
-.if defined(NO_LDCONFIG_MTREE)
- @${MKDIR} ${PREFIX}/${LDCONFIG_32DIR}
-.endif
- @${ECHO_CMD} ${USE_LDCONFIG32} | ${TR} ' ' '\n' \
- > ${PREFIX}/${LDCONFIG32_DIR}/${UNIQUENAME}
- @${ECHO_CMD} "@cwd" >> ${TMPPLIST}
- @${ECHO_CMD} ${LDCONFIG32_DIR}/${UNIQUENAME} >> ${TMPPLIST}
-.if defined(NO_LDCONFIG_MTREE)
- @${ECHO_CMD} "@unexec rmdir ${LDCONFIG32_DIR} >/dev/null 2>&1" >> ${TMPPLIST}
-.endif
-.endif
-.endif
-.if defined(INSTALLS_SHLIB)
- @${ECHO_MSG} "INSTALLS_SHLIB is deprecated. Use USE_LDCONFIG instead."
-.endif
-.endif
-.endif
-
-.if !target(create-users-groups)
-create-users-groups:
-.if defined(GROUPS) || defined(USERS)
-.if defined(GROUPS)
-.for _file in ${GID_FILES}
-.if !exists(${_file})
- @${ECHO_CMD} "** ${_file} doesn't exist. Exiting."; exit 1
-.endif
-.endfor
- @${ECHO_MSG} "===> Creating users and/or groups."
- @${ECHO_CMD} "@exec echo \"===> Creating users and/or groups.\"" >> ${TMPPLIST}
-.for _group in ${GROUPS}
-# _bgpd:*:130:
- @if ! ${GREP} -h ^${_group}: ${GID_FILES} >/dev/null 2>&1; then \
- ${ECHO_CMD} "** Cannot find any information about group \`${_group}' in ${GID_FILES}."; \
- exit 1; \
- fi
- @IFS=":"; ${GREP} -h ^${_group}: ${GID_FILES} | head -n 1 | while read group foo gid members; do \
- gid=$$(($$gid+${GID_OFFSET})); \
- if ! ${PW} groupshow $$group >/dev/null 2>&1; then \
- ${ECHO_MSG} "Creating group \`$$group' with gid \`$$gid'."; \
- ${PW} groupadd $$group -g $$gid; \
- else \
- ${ECHO_MSG} "Using existing group \`$$group'."; \
- fi; \
- ${ECHO_CMD} "@exec if ! ${PW} groupshow $$group >/dev/null 2>&1; then \
- echo \"Creating group '$$group' with gid '$$gid'.\"; \
- ${PW} groupadd $$group -g $$gid; else echo \"Using existing group '$$group'.\"; fi" >> ${TMPPLIST}; \
- done
-.endfor
-.endif
-.if defined(USERS)
-.for _file in ${UID_FILES}
-.if !exists(${_file})
- @${ECHO_CMD} "** ${_file} doesn't exist. Exiting."; exit 1
-.endif
-.endfor
-.for _user in ${USERS}
-# _bgpd:*:130:130:BGP Daemon:/var/empty:/sbin/nologin
- @if ! ${GREP} -h ^${_user}: ${UID_FILES} >/dev/null 2>&1; then \
- ${ECHO_CMD} "** Cannot find any information about user \`${_user}' in ${UID_FILES}."; \
- exit 1; \
- fi
- @IFS=":"; ${GREP} -h ^${_user}: ${UID_FILES} | head -n 1 | while read login passwd uid gid class change expire gecos homedir shell; do \
- uid=$$(($$uid+${UID_OFFSET})); \
- gid=$$(($$gid+${GID_OFFSET})); \
- class="$${class:+-L }$$class"; \
- homedir=$$(echo $$homedir | sed "s|^/usr/local|${PREFIX}|"); \
- if ! ${PW} usershow $$login >/dev/null 2>&1; then \
- ${ECHO_MSG} "Creating user \`$$login' with uid \`$$uid'."; \
- eval ${PW} useradd $$login -u $$uid -g $$gid $$class -c \"$$gecos\" -d $$homedir -s $$shell; \
- case $$homedir in /nonexistent|/var/empty) ;; *) ${INSTALL} -d -g $$gid -o $$uid $$homedir;; esac; \
- else \
- ${ECHO_MSG} "Using existing user \`$$login'."; \
- fi; \
- ${ECHO_CMD} "@exec if ! ${PW} usershow $$login >/dev/null 2>&1; then \
- echo \"Creating user '$$login' with uid '$$uid'.\"; \
- ${PW} useradd $$login -u $$uid -g $$gid $$class -c \"$$gecos\" -d $$homedir -s $$shell; \
- else echo \"Using existing user '$$login'.\"; fi" >> ${TMPPLIST}; \
- case $$homedir in /nonexistent|/var/empty) ;; *) ${ECHO_CMD} "@exec ${INSTALL} -d -g $$gid -o $$uid $$homedir" >> ${TMPPLIST};; esac; \
- done
-.endfor
-.if defined(GROUPS)
-.for _group in ${GROUPS}
-# mail:*:6:postfix,clamav
- @IFS=":"; ${GREP} -h ^${_group}: ${GID_FILES} | head -n 1 | while read group foo gid members; do \
- gid=$$(($$gid+${GID_OFFSET})); \
- IFS=","; for _login in $$members; do \
- for _user in ${USERS}; do \
- if [ "x$${_user}" = "x$${_login}" ]; then \
- if ! ${PW} groupshow ${_group} | ${GREP} -qw $${_login}; then \
- ${ECHO_MSG} "Adding user \`$${_login}' to group \`${_group}'."; \
- ${PW} groupmod ${_group} -m $${_login}; \
- fi; \
- ${ECHO_CMD} "@exec if ! ${PW} groupshow ${_group} | ${GREP} -qw $${_login}; then \
- echo \"Adding user '$${_login}' to group '${_group}'.\"; \
- ${PW} groupmod ${_group} -m $${_login}; fi" >> ${TMPPLIST}; \
- fi; \
- done; \
- done; \
- done
-.endfor
-.endif
-.if defined(USERS)
-.for _user in ${USERS}
- @if [ ! ${USERS_BLACKLIST:M${_user}} ]; then \
- ${ECHO_CMD} "@unexec if ${PW} usershow ${_user} >/dev/null 2>&1; then \
- echo \"==> You should manually remove the \\\"${_user}\\\" user. \"; fi" >> ${TMPPLIST}; \
- fi
-.endfor
-.endif
-.endif
-.else
- @${DO_NADA}
-.endif
-.endif
-
-# PR ports/152498
-# XXX Make sure the commands to create group(s)
-# and user(s) are the first in pkg-plist
-.if !target(fix-plist-sequence)
-fix-plist-sequence: ${TMPPLIST}
-.if defined(GROUPS) || defined(USERS)
- @${ECHO_CMD} "===> Correct pkg-plist sequence to create group(s) and user(s)"
- @${EGREP} -e '^@exec echo.*Creating users and' -e '^@exec.*${PW}' -e '^@exec ${INSTALL} -d -g' ${TMPPLIST} > ${TMPGUCMD}
- @${EGREP} -v -e '^@exec echo.*Creating users and' -e '^@exec.*${PW}' -e '^@exec ${INSTALL} -d -g' ${TMPPLIST} >> ${TMPGUCMD}
- @${MV} -f ${TMPGUCMD} ${TMPPLIST}
-.endif
-.endif
-
-.if !defined(DISABLE_SECURITY_CHECK)
-.if !target(security-check)
-security-check:
-# Scan PLIST for:
-# 1. setugid files
-# 2. accept()/recvfrom() which indicates network listening capability
-# 3. insecure functions (gets/mktemp/tempnam/[XXX])
-# 4. startup scripts, in conjunction with 2.
-# 5. world-writable files/dirs
-#
- -@${RM} -f ${WRKDIR}/.PLIST.setuid ${WRKDIR}/.PLIST.writable ${WRKDIR}/.PLIST.objdump; \
- ${AWK} -v prefix='${PREFIX}' ' \
- match($$0, /^@cwd /) { prefix = substr($$0, RSTART + RLENGTH); if (prefix == "/") prefix=""; next; } \
- /^@/ { next; } \
- /^\// { print; next; } \
- { print prefix "/" $$0; } \
- ' ${TMPPLIST} > ${WRKDIR}/.PLIST.flattened; \
- ${TR} '\n' '\0' < ${WRKDIR}/.PLIST.flattened \
- | ${XARGS} -0 -J % ${FIND} % -prune ! -type l -type f \( -perm -4000 -o -perm -2000 \) \( -perm -0010 -o -perm -0001 \) 2> /dev/null > ${WRKDIR}/.PLIST.setuid; \
- ${TR} '\n' '\0' < ${WRKDIR}/.PLIST.flattened \
- | ${XARGS} -0 -J % ${FIND} % -prune -perm -0002 \! -type l 2> /dev/null > ${WRKDIR}/.PLIST.writable; \
- ${TR} '\n' '\0' < ${WRKDIR}/.PLIST.flattened \
- | ${XARGS} -0 -J % ${FIND} % -prune ! -type l -type f -print0 2> /dev/null \
- | ${XARGS} -0 -n 1 ${OBJDUMP} -R 2> /dev/null > ${WRKDIR}/.PLIST.objdump; \
- if \
- ! ${AWK} -v audit="$${PORTS_AUDIT}" -f ${PORTSDIR}/Tools/scripts/security-check.awk \
- ${WRKDIR}/.PLIST.flattened ${WRKDIR}/.PLIST.objdump ${WRKDIR}/.PLIST.setuid ${WRKDIR}/.PLIST.writable; \
- then \
- www_site=$$(cd ${.CURDIR} && ${MAKE} www-site); \
- if [ ! -z "$${www_site}" ]; then \
- ${ECHO_MSG}; \
- ${ECHO_MSG} " For more information, and contact details about the security"; \
- ${ECHO_MSG} " status of this software, see the following webpage: "; \
- ${ECHO_MSG} "$${www_site}"; \
- fi; \
- fi
-.endif
-.else # i.e. defined(DISABLE_SECURITY_CHECK)
-security-check:
- @${ECHO_MSG} " WARNING: Security check has been disabled."
-.endif # !defined(DISABLE_SECURITY_CHECK)
-
-################################################################
-# Skeleton targets start here
-#
-# You shouldn't have to change these. Either add the pre-* or
-# post-* targets/scripts or redefine the do-* targets. These
-# targets don't do anything other than checking for cookies and
-# call the necessary targets/scripts.
-################################################################
-
-# Please note that the order of the following targets is important, and
-# should not be modified.
-
-.if defined(CHROOTED)
-_CHROOT_SEQ= post-chroot
-.else
-_CHROOT_SEQ=
-.endif
-_SANITY_SEQ= ${_CHROOT_SEQ} pre-everything check-makefile \
- check-categories check-makevars check-desktop-entries \
- check-depends identify-install-conflicts check-deprecated \
- check-vulnerable check-license buildanyway-message \
- options-message
-
-_PKG_DEP= check-sanity
-_PKG_SEQ= pkg-depends
-_FETCH_DEP= pkg
-_FETCH_SEQ= fetch-depends pre-fetch pre-fetch-script \
- do-fetch post-fetch post-fetch-script
-_EXTRACT_DEP= fetch
-_EXTRACT_SEQ= check-build-conflicts extract-message checksum extract-depends \
- pre-extract pre-extract-script do-extract \
- post-extract post-extract-script
-_PATCH_DEP= extract
-_PATCH_SEQ= ask-license patch-message patch-depends patch-dos2unix pre-patch \
- pre-patch-script do-patch post-patch post-patch-script
-_CONFIGURE_DEP= patch
-_CONFIGURE_SEQ= build-depends lib-depends configure-message run-autotools-fixup \
- configure-autotools pre-configure pre-configure-script \
- run-autotools do-configure post-configure post-configure-script
-_BUILD_DEP= configure
-_BUILD_SEQ= build-message pre-build pre-build-script do-build \
- post-build post-build-script
-_INSTALL_DEP= build
-_INSTALL_SEQ= install-message check-install-conflicts run-depends lib-depends apply-slist pre-install \
- pre-install-script generate-plist check-already-installed
-_INSTALL_SUSEQ= check-umask install-mtree pre-su-install \
- pre-su-install-script create-users-groups do-install \
- install-desktop-entries install-license install-rc-script \
- post-install post-install-script add-plist-info \
- add-plist-docs add-plist-examples add-plist-data \
- add-plist-post fix-plist-sequence compress-man \
- install-ldconfig-file fake-pkg security-check
-_PACKAGE_DEP= install
-_PACKAGE_SEQ= package-message pre-package pre-package-script \
- do-package post-package-script
-
-.if !target(post-chroot)
-post-chroot:
- @${DO_NADA}
-.endif
-
-.if !target(check-sanity)
-check-sanity: ${_SANITY_SEQ}
-.endif
-
-# XXX MCL might need to move in loop below?
-.if !target(fetch)
-fetch: ${_FETCH_DEP} ${_FETCH_SEQ}
-.endif
-
-.if !target(pkg)
-pkg: ${_PKG_DEP} ${_PKG_SEQ}
-.endif
-
-# Main logic. The loop generates 6 main targets and using cookies
-# ensures that those already completed are skipped.
-
-.for target in extract patch configure build install package
-
-.if !target(${target}) && defined(_OPTIONS_OK)
-${target}: ${${target:U}_COOKIE}
-.elif !target(${target})
-${target}: config-conditional
- @cd ${.CURDIR} && ${MAKE} CONFIG_DONE_${UNIQUENAME:U}=1 ${${target:U}_COOKIE}
-.elif target(${target}) && defined(IGNORE)
-.endif
-
-.if !exists(${${target:U}_COOKIE})
-
-.if ${UID} != 0 && defined(_${target:U}_SUSEQ) && !defined(INSTALL_AS_USER)
-.if defined(USE_SUBMAKE)
-${${target:U}_COOKIE}: ${_${target:U}_DEP}
- @cd ${.CURDIR} && ${MAKE} ${_${target:U}_SEQ}
-.else
-${${target:U}_COOKIE}: ${_${target:U}_DEP} ${_${target:U}_SEQ}
-.endif
- @${ECHO_MSG} "===> Switching to root credentials for '${target}' target"
- @cd ${.CURDIR} && \
- ${SU_CMD} "${MAKE} ${_${target:U}_SUSEQ}"
- @${ECHO_MSG} "===> Returning to user credentials"
- @${TOUCH} ${TOUCH_FLAGS} ${.TARGET}
-.elif defined(USE_SUBMAKE)
-${${target:U}_COOKIE}: ${_${target:U}_DEP}
- @cd ${.CURDIR} && \
- ${MAKE} ${_${target:U}_SEQ} ${_${target:U}_SUSEQ}
- @${TOUCH} ${TOUCH_FLAGS} ${.TARGET}
-.else
-${${target:U}_COOKIE}: ${_${target:U}_DEP} ${_${target:U}_SEQ} ${_${target:U}_SUSEQ}
- @${TOUCH} ${TOUCH_FLAGS} ${.TARGET}
-.endif
-
-.else
-${${target:U}_COOKIE}::
- @if [ -e ${.TARGET} ]; then \
- ${DO_NADA}; \
- else \
- cd ${.CURDIR} && ${MAKE} ${.TARGET}; \
- fi
-.endif
-
-.endfor
-
-# Enforce order for -jN builds
-
-.ORDER: ${_SANITY_SEQ}
-.ORDER: ${_PKG_DEP} ${_PKG_SEQ}
-.ORDER: ${_FETCH_DEP} ${_FETCH_SEQ}
-.ORDER: ${_EXTRACT_DEP} ${_EXTRACT_SEQ}
-.ORDER: ${_PATCH_DEP} ${_PATCH_SEQ}
-.ORDER: ${_CONFIGURE_DEP} ${_CONFIGURE_SEQ}
-.ORDER: ${_BUILD_DEP} ${_BUILD_SEQ}
-.ORDER: ${_INSTALL_DEP} ${_INSTALL_SEQ}
-.ORDER: ${_PACKAGE_DEP} ${_PACKAGE_SEQ}
-
-extract-message:
- @${ECHO_MSG} "===> Extracting for ${PKGNAME}"
-patch-message:
- @${ECHO_MSG} "===> Patching for ${PKGNAME}"
-configure-message:
- @${ECHO_MSG} "===> Configuring for ${PKGNAME}"
-build-message:
- @${ECHO_MSG} "===> Building for ${PKGNAME}"
-install-message:
- @${ECHO_MSG} "===> Installing for ${PKGNAME}"
-package-message:
- @${ECHO_MSG} "===> Building package for ${PKGNAME}"
-
-# Empty pre-* and post-* targets
-
-.for stage in pre post
-.for name in pkg check-sanity fetch extract patch configure build install package
-
-.if !target(${stage}-${name})
-${stage}-${name}:
- @${DO_NADA}
-.endif
-
-.if !target(${stage}-${name}-script)
-${stage}-${name}-script:
- @if [ -f ${SCRIPTDIR}/${.TARGET:S/-script$//} ]; then \
- cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
- ${SCRIPTDIR}/${.TARGET:S/-script$//}; \
- fi
-.endif
-
-.endfor
-.endfor
-
-# Special cases for su
-.if !target(pre-su-install)
-pre-su-install:
- @${DO_NADA}
-.endif
-
-.if !target(pre-su-install-script)
-pre-su-install-script:
- @${DO_NADA}
-.endif
-
-
-.if !target(pretty-print-www-site)
-pretty-print-www-site:
- @www_site=$$(cd ${.CURDIR} && ${MAKE} www-site); \
- if [ -n "$${www_site}" ]; then \
- ${ECHO_MSG} -n " and/or visit the "; \
- ${ECHO_MSG} -n "<a href=\"$${www_site}\">web site</a>"; \
- ${ECHO_MSG} " for futher informations"; \
- fi
-.endif
-
-################################################################
-# Some more targets supplied for users' convenience
-################################################################
-
-# Checkpatch
-#
-# Special target to verify patches
-
-.if !target(checkpatch)
-checkpatch:
- @cd ${.CURDIR} && ${MAKE} PATCH_CHECK_ONLY=yes ${_PATCH_DEP} ${_PATCH_SEQ}
-.endif
-
-# Reinstall
-#
-# Special target to re-run install
-
-.if !target(reinstall)
-reinstall:
- @${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
- @cd ${.CURDIR} && DEPENDS_TARGET="${DEPENDS_TARGET}" ${MAKE} install
-.endif
-
-# Deinstall
-#
-# Special target to remove installation
-
-.if !target(deinstall)
-deinstall:
-.if ${UID} != 0 && !defined(INSTALL_AS_USER)
- @${ECHO_MSG} "===> Switching to root credentials for '${.TARGET}' target"
- @cd ${.CURDIR} && \
- ${SU_CMD} "${MAKE} ${.TARGET}"
- @${ECHO_MSG} "===> Returning to user credentials"
-.else
- @${ECHO_MSG} "===> Deinstalling for ${PKGORIGIN}"
- @found_names=`${PKG_INFO} -q -O ${PKGORIGIN}`; \
- for p in $${found_names}; do \
- check_name=`${ECHO_CMD} $${p} | ${SED} -e 's/-[^-]*$$//'`; \
- if [ "$${check_name}" = "${PKGBASE}" ]; then \
- prfx=`${PKG_INFO} -q -p $${p} 2> /dev/null | ${SED} -ne '1s|^@cwd ||p'`; \
- if [ "x${PREFIX}" = "x$${prfx}" ]; then \
- ${ECHO_MSG} "===> Deinstalling $${p}"; \
- ${PKG_DELETE} -f $${p}; \
- else \
- ${ECHO_MSG} "===> $${p} has a different PREFIX: $${prfx}, skipping"; \
- fi; \
- fi; \
- done; \
- if [ -z "$${found_names}" ]; then \
- ${ECHO_MSG} "===> ${PKGBASE} not installed, skipping"; \
- fi
- @${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
-.endif
-.endif
-
-# Deinstall-all
-#
-# Special target to remove installation of all ports of the same origin
-
-.if !target(deinstall-all)
-deinstall-all:
-.if ${UID} != 0 && !defined(INSTALL_AS_USER)
- @${ECHO_MSG} "===> Switching to root credentials for '${.TARGET}' target"
- @cd ${.CURDIR} && \
- ${SU_CMD} "${MAKE} ${.TARGET}"
- @${ECHO_MSG} "===> Returning to user credentials"
-.else
- @${ECHO_MSG} "===> Deinstalling for ${PKGORIGIN}"
- @deinstall_names=`${PKG_INFO} -q -O ${PKGORIGIN}`; \
- for oldpkgorigin in $$(${GREP} "|${PKGORIGIN}|" ${PORTSDIR}/MOVED | ${CUT} -f 1 -d '|' | ${SORT} -u); do \
- deinstall_names="$${deinstall_names} $$(${PKG_INFO} -q -O $${oldpkgorigin})"; \
- done; \
- if [ -n "$${deinstall_names}" ]; then \
- for d in $${deinstall_names}; do \
- ${ECHO_MSG} "===> Deinstalling $${d}"; \
- ${PKG_DELETE} -f $${d}; \
- done; \
- else \
- ${ECHO_MSG} "===> ${PKGORIGIN} not installed, skipping"; \
- fi; \
- ${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
-.endif
-.endif
-
-# Cleaning up
-
-.if !target(do-clean)
-do-clean:
- @if [ -d ${WRKDIR} ]; then \
- if [ -w ${WRKDIR} ]; then \
- ${RM} -rf ${WRKDIR}; \
- else \
- ${ECHO_MSG} "===> ${WRKDIR} not writable, skipping"; \
- fi; \
- fi
-.endif
-
-.if !target(clean)
-clean:
-.if !defined(NOCLEANDEPENDS)
- @cd ${.CURDIR} && ${MAKE} limited-clean-depends
-.endif
- @${ECHO_MSG} "===> Cleaning for ${PKGNAME}"
-.if target(pre-clean)
- @cd ${.CURDIR} && ${MAKE} pre-clean
-.endif
- @cd ${.CURDIR} && ${MAKE} do-clean
-.if target(post-clean)
- @cd ${.CURDIR} && ${MAKE} post-clean
-.endif
-.endif
-
-.if !target(pre-distclean)
-pre-distclean:
- @${DO_NADA}
-.endif
-
-.if !target(distclean)
-distclean: pre-distclean clean
- @cd ${.CURDIR} && ${MAKE} delete-distfiles RESTRICTED_FILES="${_DISTFILES} ${_PATCHFILES}"
-.endif
-
-.if !target(delete-distfiles)
-delete-distfiles:
- @${ECHO_MSG} "===> Deleting distfiles for ${PKGNAME}"
- @(if [ "X${RESTRICTED_FILES}" != "X" -a -d ${_DISTDIR} ]; then \
- cd ${_DISTDIR}; \
- for file in ${RESTRICTED_FILES}; do \
- ${RM} -f $${file}; \
- dir=$${file%/*}; \
- if [ "$${dir}" != "$${file}" ]; then \
- ${RMDIR} -p $${dir} >/dev/null 2>&1 || :; \
- fi; \
- done; \
- fi)
-.if defined(DIST_SUBDIR)
- -@${RMDIR} ${_DISTDIR} >/dev/null 2>&1 || ${TRUE}
-.endif
-.endif
-
-.if !target(delete-distfiles-list)
-delete-distfiles-list:
- @${ECHO_CMD} "# ${PKGNAME}"
- @if [ "X${RESTRICTED_FILES}" != "X" ]; then \
- for file in ${RESTRICTED_FILES}; do \
- ${ECHO_CMD} "[ -f ${_DISTDIR}/$$file ] && (${ECHO_CMD} deleting ${_DISTDIR}/$$file; ${RM} -f ${_DISTDIR}/$$file)"; \
- dir=$${file%/*}; \
- if [ "$${dir}" != "$${file}" ]; then \
- ${ECHO_CMD} "(cd ${_DISTDIR} && ${RMDIR} -p $${dir} 2>/dev/null)"; \
- fi; \
- done; \
- fi
-.if defined(DIST_SUBDIR)
- @${ECHO_CMD} "${RMDIR} ${_DISTDIR} 2>/dev/null || ${TRUE}"
-.endif
-.endif
-
-# Prints out a list of files to fetch (useful to do a batch fetch)
-
-.if !target(fetch-list)
-fetch-list:
- @${MKDIR} ${_DISTDIR}
- @(cd ${_DISTDIR}; \
- ${_MASTER_SITES_ENV} ; \
- for _file in ${DISTFILES}; do \
- file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \
- select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \
- if [ ! -f $$file -a ! -f $${file##*/} ]; then \
- if [ ! -z "$$select" ] ; then \
- __MASTER_SITES_TMP= ; \
- for group in $$select; do \
- if [ ! -z \$${_MASTER_SITES_$${group}} ] ; then \
- eval ___MASTER_SITES_TMP=\$${_MASTER_SITES_$${group}} ; \
- __MASTER_SITES_TMP="$${__MASTER_SITES_TMP} $${___MASTER_SITES_TMP}" ; \
- fi; \
- done; \
- ___MASTER_SITES_TMP= ; \
- SORTED_MASTER_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__MASTER_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
- else \
- SORTED_MASTER_SITES_CMD_TMP="${SORTED_MASTER_SITES_DEFAULT_CMD}" ; \
- fi; \
- for site in `eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \
- if [ ! -z "`${ECHO_CMD} ${NOFETCHFILES} | ${GREP} -w $${file}`" ]; then \
- if [ -z "`${ECHO_CMD} ${MASTER_SITE_OVERRIDE} | ${GREP} -w $${site}`" ]; then \
- continue; \
- fi; \
- fi; \
- DIR=${DIST_SUBDIR};\
- CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \
- case $${file} in \
- */*) args="-o $${file} $${site}$${file}";; \
- *) args=$${site}$${file};; \
- esac; \
- ${ECHO_CMD} -n ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} "${FETCH_AFTER_ARGS}" '|| ' ; \
- done; \
- ${ECHO_CMD} "${ECHO_CMD} $${file} not fetched" ; \
- fi; \
- done)
-.if defined(PATCHFILES)
- @(cd ${_DISTDIR}; \
- ${_PATCH_SITES_ENV} ; \
- for _file in ${PATCHFILES}; do \
- file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \
- select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \
- if [ ! -f $$file -a ! -f $${file##*/} ]; then \
- if [ ! -z "$$select" ] ; then \
- __PATCH_SITES_TMP= ; \
- for group in $$select; do \
- if [ ! -z \$${_PATCH_SITES_$${group}} ] ; then \
- eval ___PATCH_SITES_TMP=\$${_PATCH_SITES_$${group}} ; \
- __PATCH_SITES_TMP="$${__PATCH_SITES_TMP} $${___PATCH_SITES_TMP}" ; \
- fi; \
- done; \
- ___PATCH_SITES_TMP= ; \
- SORTED_PATCH_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__PATCH_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
- else \
- SORTED_PATCH_SITES_CMD_TMP="${SORTED_PATCH_SITES_DEFAULT_CMD}" ; \
- fi; \
- for site in `eval $$SORTED_PATCH_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \
- CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \
- case $${file} in \
- */*) args="-o $${file} $${site}$${file}";; \
- *) args=$${site}$${file};; \
- esac; \
- ${ECHO_CMD} -n ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} "${FETCH_AFTER_ARGS}" '|| ' ; \
- done; \
- ${ECHO_CMD} "${ECHO_CMD} $${file} not fetched" ; \
- fi; \
- done)
-.endif
-.endif
-
-.if !target(fetch-url-list-int)
-fetch-url-list-int:
- @${MKDIR} ${_DISTDIR}
- @(cd ${_DISTDIR}; \
- ${_MASTER_SITES_ENV}; \
- for _file in ${DISTFILES}; do \
- file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \
- fileptn=`${ECHO_CMD} $$file | ${SED} 's|/|\\\\/|g;s/\./\\\\./g;s/\+/\\\\+/g;s/\?/\\\\?/g'` ; \
- select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \
- if [ ! -z "${LISTALL}" -o ! -f $$file -a ! -f $${file##*/} ]; then \
- if [ ! -z "$$select" ] ; then \
- __MASTER_SITES_TMP= ; \
- for group in $$select; do \
- if [ ! -z \$${_MASTER_SITES_$${group}} ] ; then \
- eval ___MASTER_SITES_TMP=\$${_MASTER_SITES_$${group}} ; \
- __MASTER_SITES_TMP="$${__MASTER_SITES_TMP} $${___MASTER_SITES_TMP}" ; \
- fi \
- done; \
- ___MASTER_SITES_TMP= ; \
- SORTED_MASTER_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__MASTER_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
- else \
- SORTED_MASTER_SITES_CMD_TMP="${SORTED_MASTER_SITES_DEFAULT_CMD}" ; \
- fi ; \
- for site in `eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \
- DIR=${DIST_SUBDIR:S/\//\\\\\//g:S/./\\\\./g:S/+/\\\\+/g:S/?/\\\\?/g}; \
- CKSIZE=`${AWK} "/^SIZE \($${DIR:+$$DIR\/}$$fileptn\)/"'{print $$4}' ${DISTINFO_FILE}`; \
- case $${file} in \
- */*) args="-o $${file} $${site}$${file}";; \
- *) args=$${site}$${file};; \
- esac; \
- ${ECHO_CMD} $${args} ; \
- done; \
- fi \
- done)
-.if defined(PATCHFILES)
- @(cd ${_DISTDIR}; \
- ${_PATCH_SITES_ENV} ; \
- for _file in ${PATCHFILES}; do \
- file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \
- fileptn=`${ECHO_CMD} $$file | ${SED} 's|/|\\\\/|g;s/\./\\\\./g;s/\+/\\\\+/g;s/\?/\\\\?/g'` ; \
- select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \
- if [ ! -z "${LISTALL}" -o ! -f $$file -a ! -f $${file##*/} ]; then \
- if [ ! -z "$$select" ] ; then \
- __PATCH_SITES_TMP= ; \
- for group in $$select; do \
- if [ ! -z \$${_PATCH_SITES_$${group}} ] ; then \
- eval ___PATCH_SITES_TMP=\$${_PATCH_SITES_$${group}} ; \
- __PATCH_SITES_TMP="$${__PATCH_SITES_TMP} $${___PATCH_SITES_TMP}" ; \
- fi \
- done; \
- ___PATCH_SITES_TMP= ; \
- SORTED_PATCH_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__PATCH_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
- else \
- SORTED_PATCH_SITES_CMD_TMP="${SORTED_PATCH_SITES_DEFAULT_CMD}" ; \
- fi ; \
- for site in `eval $$SORTED_PATCH_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \
- DIR=${DIST_SUBDIR:S/\//\\\\\//g:S/./\\\\./g:S/+/\\\\+/g:S/?/\\\\?/g}; \
- CKSIZE=`${AWK} "/^SIZE \($${DIR:+$$DIR\/}$$fileptn\)/"'{print $$4}' ${DISTINFO_FILE}`; \
- case $${file} in \
- */*) args="-o $${file} $${site}$${file}";; \
- *) args=$${site}$${file};; \
- esac; \
- ${ECHO_CMD} $${args} ; \
- done; \
- fi \
- done)
-.endif
-.endif
-
-.if !target(fetch-urlall-list)
-fetch-urlall-list:
- @LISTALL=yes ${MAKE} fetch-url-list-int
-.endif
-
-.if !target(fetch-url-list)
-fetch-url-list:
- @${MAKE} fetch-url-list-int
-.endif
-
-# Generates patches.
-
-update-patches:
- @toedit=`PATCH_WRKSRC=${PATCH_WRKSRC} \
- PATCHDIR=${PATCHDIR} \
- PATCH_LIST=${PATCHDIR}/patch-* \
- DIFF_ARGS=${DIFF_ARGS} \
- DISTORIG=${DISTORIG} \
- ${SH} ${PORTSDIR}/Tools/scripts/update-patches`; \
- case $$toedit in "");; \
- *) ${ECHO_CMD} -n 'edit patches: '; read i; \
- cd ${PATCHDIR} && $${VISUAL:-$${EDIT:-/usr/bin/vi}} $$toedit;; esac
-
-# Checksumming utilities
-
-check-checksum-algorithms:
- @ \
- ${checksum_init} \
- \
- for alg in ${CHECKSUM_ALGORITHMS:U}; do \
- eval alg_executable=\$$$$alg; \
- if [ -z "$$alg_executable" ]; then \
- ${ECHO_MSG} "Checksum algorithm $$alg: Couldn't find the executable."; \
- ${ECHO_MSG} "Set $$alg=/path/to/$$alg in /etc/make.conf and try again."; \
- exit 1; \
- fi; \
- done; \
-
-checksum_init=\
- SHA256=${SHA256};
-
-.if !target(makesum)
-makesum: check-checksum-algorithms
- @cd ${.CURDIR} && ${MAKE} fetch NO_CHECKSUM=yes \
- DISABLE_SIZE=yes
- @if [ -f ${DISTINFO_FILE} ]; then ${CAT} /dev/null > ${DISTINFO_FILE}; fi
- @( \
- cd ${DISTDIR}; \
- \
- ${checksum_init} \
- \
- for file in ${_CKSUMFILES}; do \
- for alg in ${CHECKSUM_ALGORITHMS:U}; do \
- eval alg_executable=\$$$$alg; \
- \
- if [ $$alg_executable != "NO" ]; then \
- $$alg_executable $$file >> ${DISTINFO_FILE}; \
- fi; \
- done; \
- ${ECHO_CMD} "SIZE ($$file) = "`${LS} -ALln $$file | ${AWK} '{print $$5}'` >> ${DISTINFO_FILE}; \
- done \
- )
- @for file in ${_IGNOREFILES}; do \
- for alg in ${CHECKSUM_ALGORITHMS:U}; do \
- ${ECHO_CMD} "$$alg ($$file) = IGNORE" >> ${DISTINFO_FILE}; \
- done; \
- done
-.endif
-
-.if !target(checksum)
-checksum: fetch check-checksum-algorithms
- @${checksum_init} \
- if [ -f ${DISTINFO_FILE} ]; then \
- cd ${DISTDIR}; OK="";\
- for file in ${_CKSUMFILES}; do \
- ignored="true"; \
- _file=$${file#${DIST_SUBDIR}/*}; \
- for alg in ${CHECKSUM_ALGORITHMS:U}; do \
- ignore="false"; \
- eval alg_executable=\$$$$alg; \
- \
- if [ $$alg_executable != "NO" ]; then \
- MKSUM=`$$alg_executable < $$file`; \
- CKSUM=`file=$$_file; ${DISTINFO_DATA}`; \
- else \
- ignore="true"; \
- fi; \
- \
- if [ $$ignore = "false" -a -z "$$CKSUM" ]; then \
- ${ECHO_MSG} "=> No $$alg checksum recorded for $$file."; \
- ignore="true"; \
- fi; \
- \
- if [ "$$CKSUM" = "IGNORE" ]; then \
- ${ECHO_MSG} "=> $$alg Checksum for $$file is set to IGNORE in distinfo file even though"; \
- ${ECHO_MSG} " the file is not in the "'$$'"{IGNOREFILES} list."; \
- ignore="true"; \
- OK=${FALSE}; \
- fi; \
- \
- if [ $$ignore = "false" ]; then \
- match="false"; \
- for chksum in $$CKSUM; do \
- if [ "$$chksum" = "$$MKSUM" ]; then \
- match="true"; \
- break; \
- fi; \
- done; \
- if [ $$match = "true" ]; then \
- ${ECHO_MSG} "=> $$alg Checksum OK for $$file."; \
- ignored="false"; \
- else \
- ${ECHO_MSG} "=> $$alg Checksum mismatch for $$file."; \
- refetchlist="$$refetchlist$$file "; \
- OK="$${OK:-retry}"; \
- ignored="false"; \
- fi; \
- fi; \
- done; \
- \
- if [ $$ignored = "true" ]; then \
- ${ECHO_MSG} "=> No suitable checksum found for $$file."; \
- OK="${FALSE}"; \
- fi; \
- \
- done; \
- \
- for file in ${_IGNOREFILES}; do \
- _file=$${file#${DIST_SUBDIR}/*}; \
- ignored="true"; \
- alreadymatched="false"; \
- for alg in ${CHECKSUM_ALGORITHMS:U}; do \
- ignore="false"; \
- eval alg_executable=\$$$$alg; \
- \
- if [ $$alg_executable != "NO" ]; then \
- CKSUM=`file=$$_file; ${DISTINFO_DATA}`; \
- else \
- ignore="true"; \
- fi; \
- \
- if [ $$ignore = "false" ]; then \
- if [ -z "$$CKSUM" ]; then \
- ${ECHO_MSG} "=> No $$alg checksum for $$file recorded (expected IGNORE)"; \
- OK="$$alreadymatched"; \
- elif [ $$CKSUM != "IGNORE" ]; then \
- ${ECHO_MSG} "=> $$alg Checksum for $$file is not set to IGNORE in distinfo file even though"; \
- ${ECHO_MSG} " the file is in the "'$$'"{IGNOREFILES} list."; \
- OK="false"; \
- else \
- ignored="false"; \
- alreadymatched="true"; \
- fi; \
- fi; \
- done; \
- \
- if ( [ $$ignored = "true" ]) ; then \
- ${ECHO_MSG} "=> No suitable checksum found for $$file."; \
- OK="false"; \
- fi; \
- \
- done; \
- \
- if [ "$${OK:=true}" = "retry" ] && [ ${FETCH_REGET} -gt 0 ]; then \
- ${ECHO_MSG} "===> Refetch for ${FETCH_REGET} more times files: $$refetchlist"; \
- if ( cd ${.CURDIR} && \
- ${MAKE} ${.MAKEFLAGS} FORCE_FETCH="$$refetchlist" FETCH_REGET="`${EXPR} ${FETCH_REGET} - 1`" fetch); then \
- if ( cd ${.CURDIR} && \
- ${MAKE} ${.MAKEFLAGS} FETCH_REGET="`${EXPR} ${FETCH_REGET} - 1`" checksum ); then \
- OK="true"; \
- fi; \
- fi; \
- fi; \
- \
- if [ "$$OK" != "true" -a ${FETCH_REGET} -eq 0 ]; then \
- ${ECHO_MSG} "===> Giving up on fetching files: $$refetchlist"; \
- ${ECHO_MSG} "Make sure the Makefile and distinfo file (${DISTINFO_FILE})"; \
- ${ECHO_MSG} "are up to date. If you are absolutely sure you want to override this"; \
- ${ECHO_MSG} "check, type \"make NO_CHECKSUM=yes [other args]\"."; \
- exit 1; \
- fi; \
- if [ "$$OK" != "true" ]; then \
- exit 1; \
- fi; \
- elif [ -n "${_CKSUMFILES:M*}" ]; then \
- ${ECHO_MSG} "=> No checksum file (${DISTINFO_FILE})."; \
- fi
-.endif
-
-################################################################
-# The special package-building targets
-# You probably won't need to touch these
-################################################################
-
-# Nobody should want to override this unless PKGNAME is simply bogus.
-
-.if !target(package-name)
-package-name:
- @${ECHO_CMD} ${PKGNAME}
-.endif
-
-# Build a package but don't check the package cookie
-
-.if !target(repackage)
-repackage: pre-repackage package
-
-pre-repackage:
- @${RM} -f ${PACKAGE_COOKIE}
-.endif
-
-# Build a package but don't check the cookie for installation, also don't
-# install package cookie
-
-.if !target(package-noinstall)
-package-noinstall:
- @${MKDIR} ${WRKDIR}
- @cd ${.CURDIR} && ${MAKE} pre-package \
- pre-package-script do-package post-package-script
- @${RM} -f ${TMPPLIST}
- -@${RMDIR} ${WRKDIR}
-.endif
-
-################################################################
-# Dependency checking
-################################################################
-
-.if !target(depends)
-depends: pkg-depends extract-depends patch-depends lib-depends fetch-depends build-depends run-depends
-
-.if defined(ALWAYS_BUILD_DEPENDS)
-_DEPEND_ALWAYS= 1
-.else
-_DEPEND_ALWAYS= 0
-.endif
-
-_INSTALL_DEPENDS= \
- if [ X${USE_PACKAGE_DEPENDS} != "X" ]; then \
- subpkgfile=`(cd $$dir; ${MAKE} $$depends_args -V PKGFILE)`; \
- subpkgname=$${subpkgfile%-*} ; \
- subpkgname=$${subpkgname\#\#*/} ; \
- if [ -r "$${subpkgfile}" -a "$$target" = "${DEPENDS_TARGET}" ]; then \
- ${ECHO_MSG} "===> Installing existing package $${subpkgfile}"; \
- if [ -n "${WITH_PKGNG}" -a $${subpkgname} = "pkg" ]; then \
- [ -d ${WRKDIR} ] || ${MKDIR} ${WRKDIR} ; \
- ${TAR} xf $${subpkgfile} -C ${WRKDIR} -s ",/.*/,,g" "*/pkg-static" ; \
- ${WRKDIR}/pkg-static add $${subpkgfile}; \
- ${RM} -f ${WRKDIR}/pkg-static; \
- else \
- ${PKG_ADD} $${subpkgfile}; \
- fi; \
- else \
- (cd $$dir; ${MAKE} -DINSTALLS_DEPENDS $$target $$depends_args) ; \
- fi; \
- else \
- (cd $$dir; ${MAKE} -DINSTALLS_DEPENDS $$target $$depends_args) ; \
- fi; \
- ${ECHO_MSG} "===> Returning to build of ${PKGNAME}";
-
-.for deptype in PKG EXTRACT PATCH FETCH BUILD RUN
-${deptype:L}-depends:
-.if defined(${deptype}_DEPENDS)
-.if !defined(NO_DEPENDS)
- @for i in `${ECHO_CMD} "${${deptype}_DEPENDS}"`; do \
- prog=$${i%%:*}; \
- if [ -z "$$prog" ]; then \
- ${ECHO_MSG} "Error: there is an empty port dependency in ${deptype}_DEPENDS."; \
- break; \
- fi; \
- dir=`${ECHO_CMD} $$i | ${SED} -e 's/[^:]*://'`; \
- if ${EXPR} "$$dir" : '.*:' > /dev/null; then \
- target=$${dir##*:}; \
- dir=$${dir%%:*}; \
- if [ X${DEPENDS_PRECLEAN} != "X" ]; then \
- target="clean $$target"; \
- depends_args="$$depends_args NOCLEANDEPENDS=yes"; \
- fi; \
- if [ X${DEPENDS_CLEAN} != "X" ]; then \
- target="$$target clean"; \
- depends_args="$$depends_args NOCLEANDEPENDS=yes"; \
- fi; \
- else \
- target="${DEPENDS_TARGET}"; \
- depends_args="${DEPENDS_ARGS}"; \
- fi; \
- if ${EXPR} "$$prog" : \\/ >/dev/null; then \
- if [ -e "$$prog" ]; then \
- if [ "$$prog" = "${NONEXISTENT}" ]; then \
- ${ECHO_MSG} "Error: ${NONEXISTENT} exists. Please remove it, and restart the build."; \
- ${FALSE}; \
- else \
- ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - found"; \
- if [ ${_DEPEND_ALWAYS} = 1 ]; then \
- ${ECHO_MSG} " (but building it anyway)"; \
- notfound=1; \
- else \
- notfound=0; \
- fi; \
- fi; \
- else \
- ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - not found"; \
- notfound=1; \
- fi; \
- else \
- case $${prog} in \
- *\>*|*\<*|*=*) pkg=yes;; \
- *) pkg="";; \
- esac; \
- if [ "$$pkg" != "" ]; then \
- if ${PKG_INFO} "$$prog" > /dev/null 2>&1 ; then \
- ${ECHO_MSG} "===> ${PKGNAME} depends on package: $$prog - found"; \
- if [ ${_DEPEND_ALWAYS} = 1 ]; then \
- ${ECHO_MSG} " (but building it anyway)"; \
- notfound=1; \
- else \
- notfound=0; \
- fi; \
- else \
- ${ECHO_MSG} "===> ${PKGNAME} depends on package: $$prog - not found"; \
- notfound=1; \
- fi; \
- if [ $$notfound != 0 ]; then \
- inverse_dep=`${ECHO_CMD} $$prog | ${SED} \
- -e 's/<=/=gt=/; s/</=ge=/; s/>=/=lt=/; s/>/=le=/' \
- -e 's/=gt=/>/; s/=ge=/>=/; s/=lt=/</; s/=le=/<=/'`; \
- pkg_info=`${PKG_INFO} -E "$$inverse_dep" || ${TRUE}`; \
- if [ "$$pkg_info" != "" ]; then \
- ${ECHO_MSG} "===> Found $$pkg_info, but you need to upgrade to $$prog."; \
- exit 1; \
- fi; \
- fi; \
- elif ${WHICH} "$$prog" > /dev/null 2>&1 ; then \
- ${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - found"; \
- if [ ${_DEPEND_ALWAYS} = 1 ]; then \
- ${ECHO_MSG} " (but building it anyway)"; \
- notfound=1; \
- else \
- notfound=0; \
- fi; \
- else \
- ${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - not found"; \
- notfound=1; \
- fi; \
- fi; \
- if [ $$notfound != 0 ]; then \
- ${ECHO_MSG} "===> Verifying $$target for $$prog in $$dir"; \
- if [ ! -d "$$dir" ]; then \
- ${ECHO_MSG} " => No directory for $$prog. Skipping.."; \
- else \
- ${_INSTALL_DEPENDS} \
- fi; \
- fi; \
- done
-.endif
-.else
- @${DO_NADA}
-.endif
-.endfor
-
-lib-depends:
-.if defined(LIB_DEPENDS) && !defined(NO_DEPENDS)
- @for i in ${LIB_DEPENDS}; do \
- lib=$${i%%:*}; \
- pattern="`${ECHO_CMD} $$lib | ${SED} -E -e 's/\./\\\\./g' -e 's/(\\\\)?\+/\\\\+/g'`"\
- dir=$${i#*:}; \
- target=$${i##*:}; \
- if ${TEST} $$dir = $$target; then \
- target="${DEPENDS_TARGET}"; \
- depends_args="${DEPENDS_ARGS}"; \
- else \
- dir=$${dir%%:*}; \
- fi; \
- ${ECHO_MSG} -n "===> ${PKGNAME} depends on shared library: $$lib"; \
- if ${LDCONFIG} ${_LDCONFIG_FLAGS} -r | ${GREP} -vwF -e "${PKGCOMPATDIR}" | ${GREP} -qwE -e "-l$$pattern"; then \
- ${ECHO_MSG} " - found"; \
- if [ ${_DEPEND_ALWAYS} = 1 ]; then \
- ${ECHO_MSG} " (but building it anyway)"; \
- notfound=1; \
- else \
- notfound=0; \
- fi; \
- else \
- ${ECHO_MSG} " - not found"; \
- notfound=1; \
- fi; \
- if [ $$notfound != 0 ]; then \
- ${ECHO_MSG} "===> Verifying $$target for $$lib in $$dir"; \
- if [ ! -d "$$dir" ]; then \
- ${ECHO_MSG} " => No directory for $$lib. Skipping.."; \
- else \
- ${_INSTALL_DEPENDS} \
- if ! ${LDCONFIG} ${_LDCONFIG_FLAGS} -r | ${GREP} -vwF -e "${PKGCOMPATDIR}" | ${GREP} -qwE -e "-l$$pattern"; then \
- ${ECHO_MSG} "Error: shared library \"$$lib\" does not exist"; \
- ${FALSE}; \
- fi; \
- fi; \
- fi; \
- done
-.endif
-
-.endif
-
-# Dependency lists: both build and runtime, recursive. Print out directory names.
-
-_UNIFIED_DEPENDS=${PKG_DEPENDS} ${EXTRACT_DEPENDS} ${PATCH_DEPENDS} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS}
-_DEPEND_DIRS= ${_UNIFIED_DEPENDS:C,^[^:]*:([^:]*).*$,\1,}
-
-all-depends-list:
- @${ALL-DEPENDS-LIST}
-
-ALL-DEPENDS-LIST= \
- L="${_DEPEND_DIRS}"; \
- checked=""; \
- while [ -n "$$L" ]; do \
- l=""; \
- for d in $$L; do \
- case $$checked in \
- $$d\ *|*\ $$d\ *|*\ $$d) \
- continue;; \
- esac; \
- checked="$$checked $$d"; \
- if [ ! -d $$d ]; then \
- ${ECHO_MSG} "${PKGNAME}: \"$$d\" non-existent -- dependency list incomplete" >&2; \
- continue; \
- fi; \
- ${ECHO_CMD} $$d; \
- if ! children=$$(cd $$d && ${MAKE} -V _DEPEND_DIRS); then\
- ${ECHO_MSG} "${PKGNAME}: \"$$d\" erroneous -- dependency list incomplete" >&2; \
- continue; \
- fi; \
- for child in $$children; do \
- case "$$checked $$l" in \
- $$child\ *|*\ $$child\ *|*\ $$child) \
- continue;; \
- esac; \
- l="$$l $$child"; \
- done; \
- done; \
- L=$$l; \
- done
-
-CLEAN-DEPENDS-FULL= \
- L="${_DEPEND_DIRS}"; \
- checked=""; \
- while [ -n "$$L" ]; do \
- l=""; \
- for d in $$L; do \
- case $$checked in \
- $$d\ *|*\ $$d\ *|*\ $$d) \
- continue;; \
- esac; \
- checked="$$checked $$d"; \
- if [ ! -d $$d ]; then \
- ${ECHO_MSG} "${PKGNAME}: \"$$d\" non-existent -- dependency list incomplete" >&2; \
- continue; \
- fi; \
- if ! children=$$(cd $$d && ${MAKE} -V WRKDIR -V _DEPEND_DIRS); then \
- ${ECHO_MSG} "${PKGNAME}: \"$$d\" erroneous -- dependency list incomplete" >&2; \
- continue; \
- fi; \
- state=0; \
- for child in $$children; do \
- case $$state in \
- 0) \
- if [ -d $$child ]; then \
- ${ECHO_CMD} $$d; \
- fi; \
- state=1;; \
- 1) \
- case "$$checked $$l" in \
- $$child\ *|*\ $$child\ *|*\ $$child) \
- continue;; \
- esac; \
- l="$$l $$child";; \
- esac; \
- done; \
- done; \
- L=$$l; \
- done
-
-CLEAN-DEPENDS-LIMITED= \
- L="${_DEPEND_DIRS}"; \
- checked=""; \
- while [ -n "$$L" ]; do \
- l=""; \
- for d in $$L; do \
- case $$checked in \
- $$d\ *|*\ $$d\ *|*\ $$d) \
- continue;; \
- esac; \
- checked="$$checked $$d"; \
- if [ ! -d $$d ]; then \
- ${ECHO_MSG} "${PKGNAME}: \"$$d\" non-existent -- dependency list incomplete" >&2; \
- continue; \
- fi; \
- if ! children=$$(cd $$d && ${MAKE} -V WRKDIR -V _DEPEND_DIRS); then \
- ${ECHO_MSG} "${PKGNAME}: \"$$d\" erroneous -- dependency list incomplete" >&2; \
- continue; \
- fi; \
- state=0; \
- for child in $$children; do \
- case $$state in \
- 0) \
- if [ ! -d $$child ]; then \
- break; \
- fi; \
- state=1; \
- ${ECHO_CMD} $$d;; \
- 1) \
- case "$$checked $$l" in \
- $$child\ *|*\ $$child\ *|*\ $$child) \
- continue;; \
- esac; \
- l="$$l $$child";; \
- esac; \
- done; \
- done; \
- L=$$l; \
- done
-
-.if !target(clean-depends)
-clean-depends:
- @for dir in $$(${CLEAN-DEPENDS-FULL}); do \
- (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean); \
- done
-.endif
-
-.if !target(limited-clean-depends)
-limited-clean-depends:
- @for dir in $$(${CLEAN-DEPENDS-LIMITED}); do \
- (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean); \
- done
-.endif
-
-.if !target(deinstall-depends)
-deinstall-depends:
- @for dir in $$(${ALL-DEPENDS-LIST}); do \
- (cd $$dir; ${MAKE} deinstall); \
- done
-.endif
-
-.if !target(fetch-recursive)
-fetch-recursive:
- @${ECHO_MSG} "===> Fetching all distfiles for ${PKGNAME} and dependencies"
- @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
- (cd $$dir; ${MAKE} fetch); \
- done
-.endif
-
-.if !target(fetch-recursive-list)
-fetch-recursive-list:
- @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
- (cd $$dir; ${MAKE} fetch-list); \
- done
-.endif
-
-# Used by fetch-required and fetch-required list, this script looks
-# at each of the dependencies. If 3 items are specified in the tuple,
-# such as foo:${PORTSDIR}/graphics/foo:extract, the first item (foo)
-# is examined. Only if it begins with a / and does not exist on the
-# file-system will ``make targ'' proceed.
-# For more usual (dual-item) dependency tuples, the ``make targ''
-# proceeds, if the exact package, which the directory WOULD'VE installed,
-# is not yet installed.
-# This is the exact behaviour of the old code, and it may need
-# revisiting. For example, the entire first case seems dubious, and in
-# the second case we, probably, should be satisfied with _any_ (earlier)
-# package, with the same origin as that of the dir.
-#
-# -mi
-FETCH_LIST?= for i in $$deps; do \
- prog=$${i%%:*}; dir=$${i\#*:}; \
- case $$dir in \
- *:*) if [ $$prog != $${prog\#/} -o ! -e $$prog ]; then \
- dir=$${dir%%:*}; \
- else \
- continue; \
- fi;; \
- *) if [ -d ${PKG_DBDIR}/$$(cd $$dir; ${MAKE} -V PKGNAME) ]; then \
- continue; \
- fi;; \
- esac; \
- echo cd $$dir; cd $$dir; ${MAKE} $$targ; \
- done
-
-.if !target(fetch-required)
-fetch-required: fetch
-.if defined(NO_DEPENDS)
- @${ECHO_MSG} "===> NO_DEPENDS is set, not fetching any other distfiles for ${PKGNAME}"
-.else
- @${ECHO_MSG} "===> Fetching all required distfiles for ${PKGNAME} and dependencies"
-.for deptype in PKG EXTRACT PATCH FETCH BUILD RUN
-.if defined(${deptype}_DEPENDS)
- @targ=fetch; deps="${${deptype}_DEPENDS}"; ${FETCH_LIST}
-.endif
-.endfor
-.endif
-
-.endif
-
-.if !target(fetch-required-list)
-fetch-required-list: fetch-list
-.if !defined(NO_DEPENDS)
-.for deptype in PKG EXTRACT PATCH FETCH BUILD RUN
-.if defined(${deptype}_DEPENDS)
- @targ=fetch-list; deps="${${deptype}_DEPENDS}"; ${FETCH_LIST}
-.endif
-.endfor
-.endif
-.endif
-
-.if !target(checksum-recursive)
-checksum-recursive:
- @${ECHO_MSG} "===> Fetching and checking checksums for ${PKGNAME} and dependencies"
- @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
- (cd $$dir; ${MAKE} checksum); \
- done
-.endif
-
-# Dependency lists: build and runtime. Print out directory names.
-
-build-depends-list:
-.if defined(PKG_DEPENDS) || defined(EXTRACT_DEPENDS) || defined(PATCH_DEPENDS) || defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS)
- @${BUILD-DEPENDS-LIST}
-.endif
-
-BUILD-DEPENDS-LIST= \
- for dir in $$(${ECHO_CMD} "${PKG_DEPENDS} ${EXTRACT_DEPENDS} ${PATCH_DEPENDS} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}" | ${SED} -E -e 's,([^: ]*):([^: ]*)(:[^ ]*)?,\2,g' -e 'y/ /\n/'| ${SORT} -u); do \
- if [ -d $$dir ]; then \
- ${ECHO_CMD} $$dir; \
- else \
- ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
- fi; \
- done | ${SORT} -u
-
-run-depends-list:
-.if defined(LIB_DEPENDS) || defined(RUN_DEPENDS)
- @${RUN-DEPENDS-LIST}
-.endif
-
-RUN-DEPENDS-LIST= \
- for dir in $$(${ECHO_CMD} "${_LIB_RUN_DEPENDS:C,.*:([^:]*).*,\1,}" | ${SED} -e 'y/ /\n/' | ${SORT} -u); do \
- if [ -d $$dir ]; then \
- ${ECHO_CMD} $$dir; \
- else \
- ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
- fi; \
- done | ${SORT} -u
-
-# Package (recursive runtime) dependency list. Print out both directory names
-# and package names.
-
-package-depends-list:
-.if defined(CHILD_DEPENDS) || defined(LIB_DEPENDS) || defined(RUN_DEPENDS)
- @${PACKAGE-DEPENDS-LIST}
-.endif
-
-_LIB_RUN_DEPENDS= ${LIB_DEPENDS} ${RUN_DEPENDS}
-PACKAGE-DEPENDS-LIST?= \
- if [ "${CHILD_DEPENDS}" ]; then \
- installed=$$(${PKG_INFO} -qO ${PKGORIGIN} 2>/dev/null || \
- ${TRUE}); \
- if [ "$$installed" ]; then \
- break; \
- fi; \
- if [ -z "$$installed" ]; then \
- installed="${PKGNAME}"; \
- fi; \
- for pkgname in $$installed; do \
- ${ECHO_CMD} "$$pkgname ${.CURDIR} ${PKGORIGIN}"; \
- done; \
- fi; \
- checked="${PARENT_CHECKED}"; \
- for dir in ${_LIB_RUN_DEPENDS:C,[^:]*:([^:]*):?.*,\1,}; do \
- dir=$$(${REALPATH} $$dir); \
- if [ -d $$dir ]; then \
- case $$checked in \
- $$dir|$$dir\ *|*\ $$dir|*\ $$dir\ *) continue;; \
- esac; \
- childout=$$(cd $$dir; ${MAKE} CHILD_DEPENDS=yes PARENT_CHECKED="$$checked" package-depends-list); \
- set -- $$childout; \
- childdir=""; \
- while [ $$\# != 0 ]; do \
- childdir="$$childdir $$2"; \
- ${ECHO_CMD} "$$1 $$2 $$3"; \
- shift 3; \
- done; \
- checked="$$dir $$childdir $$checked"; \
- else \
- ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
- fi; \
- done
-
-ACTUAL-PACKAGE-DEPENDS?= \
- if [ "${_LIB_RUN_DEPENDS}" != " " ]; then \
- origins=$$(for pkgname in ${PKG_DBDIR}/*; do \
- if [ -e $$pkgname/+CONTENTS ]; then \
- ${ECHO_CMD} $${pkgname\#\#*/}; \
- ${SED} -n -e "s/@comment ORIGIN://p" $$pkgname/+CONTENTS; \
- fi; \
- done); \
- for dir in ${_LIB_RUN_DEPENDS:C,[^:]*:([^:]*):?.*,\1,}; do \
- tmp=$${dir\#${PORTSDIR}/}; \
- if [ "$$tmp" = "$$dir" ]; then \
- tmp=$${dir%/*}; \
- dir=$${tmp\#\#*/}/$${dir\#\#*/}; \
- else \
- dir=$$tmp; \
- fi; \
- set -- $$origins; \
- while [ $$\# -gt 1 ]; do \
- if [ ! -d "${PORTSDIR}/$$2" ]; then \
- shift; \
- continue; \
- fi; \
- if [ "$$dir" = "$$2" ]; then \
- ${ECHO_CMD} $$1:$$dir; \
- if [ -e ${PKG_DBDIR}/$$1/+CONTENTS -a -z "${EXPLICIT_PACKAGE_DEPENDS}" ]; then \
- packagelist="$$packagelist ${PKG_DBDIR}/$$1/+CONTENTS"; \
- fi; \
- break; \
- fi; \
- shift 2; \
- done; \
- done; \
- [ -z "$$packagelist" ] || ${AWK} -F '( |:)' 'BEGIN { pkgname="broken_contents" } /@pkgdep / { pkgname=$$2 } /@comment DEPORIGIN:/ { printf "%s:%s\n", pkgname, $$3; pkgname="broken_contents" }' $$packagelist; \
- fi
-
-# Print out package names.
-
-package-depends:
- @${PACKAGE-DEPENDS-LIST} | ${AWK} '{print $$1":"$$3}'
-
-actual-package-depends:
- @${ACTUAL-PACKAGE-DEPENDS}
-
-# Build packages for port and dependencies
-
-package-recursive: package
- @for dir in $$(${ALL-DEPENDS-LIST}); do \
- (cd $$dir; ${MAKE} package-noinstall); \
- done
-
-# Show missing dependencies
-missing:
- @_origins=$$(${PKG_INFO} -aoq); \
- for dir in $$(${ALL-DEPENDS-LIST}); do \
- _origin=$${dir##${PORTSDIR}/}; \
- if ! $$(${ECHO_CMD} $${_origins} | ${GREP} -q $${_origin}); then \
- ${ECHO_CMD} $${_origin}; \
- fi; \
- done
-
-################################################################
-# Everything after here are internal targets and really
-# shouldn't be touched by anybody but the release engineers.
-################################################################
-
-# This target generates an index entry suitable for aggregation into
-# a large index. Format is:
-#
-# distribution-name|port-path|installation-prefix|comment| \
-# description-file|maintainer|categories|extract-depends| \
-# patch-depends|fetch-depends|build-depends|run-depends|www site
-#
-# If this ever changes, portmgr should contact the portsnap maintainer
-# first to avoid gratuitous breakage.
-
-. if !target(describe)
-_EXTRACT_DEPENDS=${EXTRACT_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u}
-_PATCH_DEPENDS=${PATCH_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u}
-_FETCH_DEPENDS=${FETCH_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u}
-_LIB_DEPENDS=${LIB_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u}
-_BUILD_DEPENDS=${BUILD_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u} ${_LIB_DEPENDS}
-_RUN_DEPENDS=${RUN_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u} ${_LIB_DEPENDS}
-. if exists(${DESCR})
-_DESCR=${DESCR}
-. else
-_DESCR=/dev/null
-. endif
-
-. if defined(BUILDING_INDEX) && defined(INDEX_PORTS)
-INDEX_OUT=${INDEX_TMPDIR}/${INDEXFILE}.desc.aggr
-. else
-INDEX_OUT=/dev/stdout
-. endif
-
-describe:
- @(${ECHO_CMD} -n "${PKGNAME}|${.CURDIR}|${PREFIX}|"; \
- ${ECHO_CMD} -n ${COMMENT:Q}; \
- ${ECHO_CMD} -n "|${_DESCR}|${MAINTAINER}|${CATEGORIES}|${_EXTRACT_DEPENDS}|${_PATCH_DEPENDS}|${_FETCH_DEPENDS}|${_BUILD_DEPENDS:O:u}|${_RUN_DEPENDS:O:u}|"; \
- while read one two discard; do \
- case "$$one" in \
- WWW:) case "$$two" in \
- https://*|http://*|ftp://*) ${ECHO_CMD} -n "$$two" ;; \
- *) ${ECHO_CMD} -n "http://$$two" ;; \
- esac; \
- break; \
- ;; \
- esac; \
- done < ${DESCR}; ${ECHO_CMD}) >>${INDEX_OUT}
-. endif
-
-www-site:
-.if exists(${DESCR})
- @${AWK} '$$1 ~ /^WWW:/ {print $$2}' ${DESCR} | ${HEAD} -1
-.else
- @${ECHO_CMD}
-.endif
-
-.if !target(readmes)
-readmes: readme
-.endif
-
-.if !target(readme)
-readme:
- @${RM} -f ${.CURDIR}/README.html
- @cd ${.CURDIR} && ${MAKE} ${.CURDIR}/README.html
-.endif
-
-${.CURDIR}/README.html:
- @${ECHO_MSG} "===> Creating README.html for ${PKGNAME}"
- @${SED} -e 's|%%PORT%%|'$$(${ECHO_CMD} ${.CURDIR} | \
- ${SED} -e 's|.*/\([^/]*/[^/]*\)$$|\1|')'|g' \
- -e 's|%%PKG%%|${PKGNAME}|g' \
- -e 's|%%COMMENT%%|'"$$(${ECHO_CMD} ${COMMENT:Q})"'|' \
- -e '/%%COMMENT%%/d' \
- -e 's|%%DESCR%%|'"$$(${ECHO_CMD} ${DESCR} | \
- ${SED} -e 's|${.CURDIR}/||')"'|' \
- -e 's|%%EMAIL%%|'"$$(${ECHO_CMD} "${MAINTAINER}" | \
- ${SED} -e 's/([^)]*)//;s/.*<//;s/>.*//')"'|g' \
- -e 's|%%MAINTAINER%%|${MAINTAINER}|g' \
- -e 's|%%WEBSITE%%|'"$$(cd ${.CURDIR} && eval ${MAKE} pretty-print-www-site)"'|' \
- -e 's|%%BUILD_DEPENDS%%|'"$$(cd ${.CURDIR} && eval ${MAKE} pretty-print-build-depends-list)"'|' \
- -e 's|%%RUN_DEPENDS%%|'"$$(cd ${.CURDIR} && eval ${MAKE} pretty-print-run-depends-list)"'|' \
- -e 's|%%TOP%%|'"$$(${ECHO_CMD} ${CATEGORIES} | \
- ${SED} -e 's| .*||' -e 's|[^/]*|..|g')"'/..|' \
- ${TEMPLATES}/README.port >> ${.TARGET}
-
-# The following two targets require an up-to-date INDEX in ${PORTSDIR}
-
-_PRETTY_PRINT_DEPENDS_LIST=\
- if [ ! -r ${INDEXDIR}/${INDEXFILE} ] ; then \
- ${ECHO_MSG} "${.TARGET} requires an INDEX file (${INDEXFILE}). Please run make index or make fetchindex."; \
- else \
- target=${.TARGET:C/pretty-print-(.*)-depends-list/\1/} ; \
- if [ "$$target" = "build" ] ; then fldnum=8 ; else fldnum=9 ; fi; \
- ${ECHO_MSG} -n 'This port requires package(s) "' ; \
- ${ECHO_MSG} -n `${AWK} -F\| "\\$$1 ~ /^${PKGNAME}/ {print \\$$$${fldnum};}" ${INDEXDIR}/${INDEXFILE}` ; \
- ${ECHO_MSG} "\" to $$target."; \
- fi;
-
-
-.if !target(pretty-print-build-depends-list)
-pretty-print-build-depends-list:
-.if defined(PKG_PEPENDS) || defined(EXTRACT_DEPENDS) || defined(PATCH_DEPENDS) || \
- defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS)
- @${_PRETTY_PRINT_DEPENDS_LIST}
-.endif
-.endif
-
-.if !target(pretty-print-run-depends-list)
-pretty-print-run-depends-list:
-.if defined(RUN_DEPENDS) || defined(LIB_DEPENDS)
- @${_PRETTY_PRINT_DEPENDS_LIST}
-.endif
-.endif
-
-_SUB_LIST_TEMP= ${SUB_LIST:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/}
-.if !target(apply-slist)
-apply-slist:
-.if defined(SUB_FILES)
-.for file in ${SUB_FILES}
-.if !exists(${FILESDIR}/${file}.in)
- @${ECHO_MSG} "** Missing ${FILESDIR}/${file}.in for ${PKGNAME}."; exit 1
-.else
- @${SED} ${_SUB_LIST_TEMP} -e '/^@comment /d' ${FILESDIR}/${file}.in > ${WRKDIR}/${file}
-.endif
-.endfor
-.for i in pkg-message pkg-install pkg-deinstall pkg-req
-.if ${SUB_FILES:M${i}*}!=""
-${i:S/-//:U}= ${WRKDIR}/${SUB_FILES:M${i}*}
-.endif
-.endfor
-.endif
-.endif
-
-# Generate packing list. Also tests to make sure all required package
-# files exist.
-
-.if !target(generate-plist)
-generate-plist:
- @${ECHO_MSG} "===> Generating temporary packing list"
- @${MKDIR} `${DIRNAME} ${TMPPLIST}`
- @if [ ! -f ${DESCR} ]; then ${ECHO_MSG} "** Missing pkg-descr for ${PKGNAME}."; exit 1; fi
- @>${TMPPLIST}
- @for file in ${PLIST_FILES}; do \
- ${ECHO_CMD} $${file} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} >> ${TMPPLIST}; \
- done
- @for man in ${__MANPAGES}; do \
- ${ECHO_CMD} $${man} >> ${TMPPLIST}; \
- done
-.for _PREFIX in ${PREFIX}
-.if ${_TMLINKS:M${_PREFIX}*}x != x
- @for i in ${_TMLINKS:M${_PREFIX}*:S|^${_PREFIX}/||}; do \
- ${ECHO_CMD} "$$i" >> ${TMPPLIST}; \
- done
-.endif
-.if ${_TMLINKS:N${_PREFIX}*}x != x
- @${ECHO_CMD} @cwd / >> ${TMPPLIST}
- @for i in ${_TMLINKS:N${_PREFIX}*:S|^/||}; do \
- ${ECHO_CMD} "$$i" >> ${TMPPLIST}; \
- done
- @${ECHO_CMD} '@cwd ${PREFIX}' >> ${TMPPLIST}
-.endif
- @for i in $$(${ECHO_CMD} ${__MANPAGES} ${_TMLINKS:M${_PREFIX}*:S|^${_PREFIX}/||} ' ' | ${SED} -E -e 's|man([1-9ln])/([^/ ]+) |cat\1/\2 |g'); do \
- ${ECHO_CMD} "@unexec rm -f %D/$$i %D/$${i%.gz} %D/$${i%.bz2} %D/$$i.gz %D/$$i.bz2" >> ${TMPPLIST}; \
- done
-.endfor
- @if [ -f ${PLIST} ]; then \
- ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} ${PLIST} >> ${TMPPLIST}; \
- fi
-
-.for dir in ${PLIST_DIRS}
- @${ECHO_CMD} ${dir} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} -e 's,^,@dirrm ,' >> ${TMPPLIST}
-.endfor
-.for dir in ${PLIST_DIRSTRY}
- @${ECHO_CMD} ${dir} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} -e 's,^,@dirrmtry ,' >> ${TMPPLIST}
-.endfor
-
-.for reinplace in ${PLIST_REINPLACE}
-.if defined(PLIST_REINPLACE_${reinplace:U})
- @${SED} -i "" -e '${PLIST_REINPLACE_${reinplace:U}}' ${TMPPLIST}
-.endif
-.endfor
-
-.if defined(USE_LINUX_PREFIX)
-.if defined(USE_LDCONFIG)
- @${ECHO_CMD} "@exec ${LDCONFIG_CMD}" >> ${TMPPLIST}
- @${ECHO_CMD} "@unexec ${LDCONFIG_CMD}" >> ${TMPPLIST}
-.endif
-.else
-.if defined(USE_LDCONFIG)
-.if !defined(INSTALL_AS_USER)
- @${ECHO_CMD} "@exec ${LDCONFIG} -m ${USE_LDCONFIG}" >> ${TMPPLIST}
- @${ECHO_CMD} "@unexec ${LDCONFIG} -R" >> ${TMPPLIST}
-.else
- @${ECHO_CMD} "@exec ${LDCONFIG} -m ${USE_LDCONFIG} || ${TRUE}" >> ${TMPPLIST}
- @${ECHO_CMD} "@unexec ${LDCONFIG} -R || ${TRUE}" >> ${TMPPLIST}
-.endif
-.endif
-.if defined(USE_LDCONFIG32)
-.if !defined(INSTALL_AS_USER)
- @${ECHO_CMD} "@exec ${LDCONFIG} -32 -m ${USE_LDCONFIG32}" >> ${TMPPLIST}
- @${ECHO_CMD} "@unexec ${LDCONFIG} -32 -R" >> ${TMPPLIST}
-.else
- @${ECHO_CMD} "@exec ${LDCONFIG} -32 -m ${USE_LDCONFIG32} || ${TRUE}" >> ${TMPPLIST}
- @${ECHO_CMD} "@unexec ${LDCONFIG} -32 -R || ${TRUE}" >> ${TMPPLIST}
-.endif
-.endif
-.endif
-.endif
-
-${TMPPLIST}:
- @cd ${.CURDIR} && ${MAKE} generate-plist
-
-${TMPPLIST_SORT}: ${TMPPLIST}
- @${SORT} -u ${TMPPLIST} >${TMPPLIST_SORT}
-
-.if !target(add-plist-docs)
-add-plist-docs:
-.if defined(PORTDOCS) && !defined(NOPORTDOCS)
- @if ${EGREP} -qe '^@cw?d' ${TMPPLIST} && \
- [ "`${SED} -En -e '/^@cw?d[ ]*/s,,,p' ${TMPPLIST} | ${TAIL} -n 1`" != "${PREFIX}" ]; then \
- ${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \
- fi
-.for x in ${PORTDOCS}
- @if ${ECHO_CMD} "${x}"| ${AWK} '$$1 ~ /(\*|\||\[|\]|\?|\{|\}|\$$)/ { exit 1};'; then \
- if [ ! -e ${DOCSDIR}/${x} ]; then \
- ${ECHO_CMD} ${DOCSDIR_REL}/${x} >> ${TMPPLIST}; \
- fi;fi
-.endfor
- @${FIND} -P ${PORTDOCS:S/^/${DOCSDIR}\//} ! -type d 2>/dev/null | \
- ${SED} -ne 's,^${PREFIX}/,,p' >> ${TMPPLIST}
- @${FIND} -P -d ${PORTDOCS:S/^/${DOCSDIR}\//} -type d 2>/dev/null | \
- ${SED} -ne 's,^${PREFIX}/,@dirrm ,p' >> ${TMPPLIST}
- @${ECHO_CMD} "@dirrm ${DOCSDIR_REL}" >> ${TMPPLIST}
-.else
- @${DO_NADA}
-.endif
-.endif
-
-.if !target(add-plist-examples)
-add-plist-examples:
-.if defined(PORTEXAMPLES) && !defined(NOPORTEXAMPLES)
- @if ${EGREP} -qe '^@cw?d' ${TMPPLIST} && \
- [ "`${SED} -En -e '/^@cw?d[ ]*/s,,,p' ${TMPPLIST} | ${TAIL} -n 1`" != "${PREFIX}" ]; then \
- ${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \
- fi
-.for x in ${PORTEXAMPLES}
- @if ${ECHO_CMD} "${x}"| ${AWK} '$$1 ~ /(\*|\||\[|\]|\?|\{|\}|\$$)/ { exit 1};'; then \
- if [ ! -e ${EXAMPLESDIR}/${x} ]; then \
- ${ECHO_CMD} ${EXAMPLESDIR}/${x} | \
- ${SED} -e 's,^${PREFIX}/,,' >> ${TMPPLIST}; \
- fi;fi
-.endfor
- @${FIND} -P ${PORTEXAMPLES:S/^/${EXAMPLESDIR}\//} ! -type d 2>/dev/null | \
- ${SED} -ne 's,^${PREFIX}/,,p' >> ${TMPPLIST}
- @${FIND} -P -d ${PORTEXAMPLES:S/^/${EXAMPLESDIR}\//} -type d 2>/dev/null | \
- ${SED} -ne 's,^${PREFIX}/,@dirrm ,p' >> ${TMPPLIST}
- @${ECHO_CMD} "@dirrm ${EXAMPLESDIR:S,^${PREFIX}/,,}" >> ${TMPPLIST}
-.else
- @${DO_NADA}
-.endif
-.endif
-
-.if !target(add-plist-data)
-add-plist-data:
-.if defined(PORTDATA) && !defined(NOPORTDATA)
- @if ${EGREP} -qe '^@cw?d' ${TMPPLIST} && \
- [ "`${SED} -En -e '/^@cw?d[ ]*/s,,,p' ${TMPPLIST} | ${TAIL} -n 1`" != "${PREFIX}" ]; then \
- ${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \
- fi
-.for x in ${PORTDATA}
- @if ${ECHO_CMD} "${x}"| ${AWK} '$$1 ~ /(\*|\||\[|\]|\?|\{|\}|\$$)/ { exit 1};'; then \
- if [ ! -e ${DATADIR}/${x} ]; then \
- ${ECHO_CMD} ${DATADIR}/${x} | \
- ${SED} -e 's,^${PREFIX}/,,' >> ${TMPPLIST}; \
- fi;fi
-.endfor
- @${FIND} -P ${PORTDATA:S/^/${DATADIR}\//} ! -type d 2>/dev/null | \
- ${SED} -ne 's,^${PREFIX}/,,p' >> ${TMPPLIST}
- @${FIND} -P -d ${PORTDATA:S/^/${DATADIR}\//} -type d 2>/dev/null | \
- ${SED} -ne 's,^${PREFIX}/,@dirrm ,p' >> ${TMPPLIST}
- @${ECHO_CMD} "@dirrm ${DATADIR:S,^${PREFIX}/,,}" >> ${TMPPLIST}
-.else
- @${DO_NADA}
-.endif
-.endif
-
-.if !target(add-plist-info)
-add-plist-info:
-# Process GNU INFO files at package install/deinstall time
-.if defined(INFO)
-.for i in ${INFO}
- install-info --quiet ${PREFIX}/${INFO_PATH}/$i.info ${PREFIX}/${INFO_PATH}/dir
- @${ECHO_CMD} "@unexec install-info --quiet --delete %D/${INFO_PATH}/$i.info %D/${INFO_PATH}/dir" \
- >> ${TMPPLIST}
- @${LS} ${PREFIX}/${INFO_PATH}/$i.info* | ${SED} -e s:${PREFIX}/::g >> ${TMPPLIST}
- @${ECHO_CMD} "@exec install-info --quiet %D/${INFO_PATH}/$i.info %D/${INFO_PATH}/dir" \
- >> ${TMPPLIST}
-.endfor
-.if defined(INFO_SUBDIR)
- @${ECHO_CMD} "@unexec ${RMDIR} %D/${INFO_PATH}/${INFO_SUBDIR} 2> /dev/null || true" >> ${TMPPLIST}
-.endif
-.if (${PREFIX} != "/usr")
- @${ECHO_CMD} "@unexec if [ -f %D/${INFO_PATH}/dir ]; then if sed -e '1,/Menu:/d' %D/${INFO_PATH}/dir | grep -q '^[*] '; then true; else rm %D/${INFO_PATH}/dir; fi; fi" >> ${TMPPLIST}
-.if (${PREFIX} != ${LOCALBASE} && ${PREFIX} != ${LINUXBASE})
- @${ECHO_CMD} "@unexec rmdir %D/${INFO_PATH} 2>/dev/null || true" >> ${TMPPLIST}
-.endif
-.endif
-.endif
-.endif
-
-# If we're installing into a non-standard PREFIX, we need to remove that directory at
-# deinstall-time
-.if !target(add-plist-post)
-add-plist-post:
-.if (${PREFIX} != ${LOCALBASE} && ${PREFIX} != ${LINUXBASE} && ${PREFIX} != "/usr")
- @${ECHO_CMD} "@unexec rmdir %D 2> /dev/null || true" >> ${TMPPLIST}
-.else
- @${DO_NADA}
-.endif
-.endif
-
-.if !target(install-rc-script)
-install-rc-script:
-.if defined(USE_RCORDER) || defined(USE_RC_SUBR) && ${USE_RC_SUBR:U} != "YES"
-.if defined(USE_RCORDER)
- @${ECHO_MSG} "===> Installing early rc.d startup script(s)"
- @${ECHO_CMD} "@cwd /" >> ${TMPPLIST}
- @for i in ${USE_RCORDER}; do \
- ${INSTALL_SCRIPT} ${WRKDIR}/$${i} /etc/rc.d/$${i%.sh}; \
- ${ECHO_CMD} "etc/rc.d/$${i%.sh}" >> ${TMPPLIST}; \
- done
- @${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}
-.endif
-.if defined(USE_RC_SUBR) && ${USE_RC_SUBR:U} != "YES"
- @${ECHO_MSG} "===> Installing rc.d startup script(s)"
- @${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}
- @for i in ${USE_RC_SUBR}; do \
- ${INSTALL_SCRIPT} ${WRKDIR}/$${i} ${PREFIX}/etc/rc.d/$${i%.sh}; \
- ${ECHO_CMD} "etc/rc.d/$${i%.sh}" >> ${TMPPLIST}; \
- done
-.endif
-.else
- @${DO_NADA}
-.endif
-.endif
-
-# Compress (or uncompress) and symlink manpages.
-.if !target(compress-man)
-compress-man:
-.if defined(_MANPAGES) || defined(_MLINKS)
-.if ${MANCOMPRESSED} == yes && defined(NO_MANCOMPRESS)
- @${ECHO_MSG} "===> Uncompressing manual pages for ${PKGNAME}"
- @_manpages='${_MANPAGES:S/'/'\''/g}' && [ "$${_manpages}" != "" ] && ( eval ${GUNZIP_CMD} $${_manpages} ) || ${TRUE}
-.elif ${MANCOMPRESSED} == no && !defined(NO_MANCOMPRESS)
- @${ECHO_MSG} "===> Compressing manual pages for ${PKGNAME}"
- @_manpages='${_MANPAGES:S/'/'\''/g}' && [ "$${_manpages}" != "" ] && ( eval ${GZIP_CMD} $${_manpages} ) || ${TRUE}
-.endif
-.if defined(_MLINKS)
- @set -- ${_MLINKS}; \
- while :; do \
- [ $$# -eq 0 ] && break || ${TRUE}; \
- ${RM} -f $${2%.gz}; ${RM} -f $$2.gz; \
- ${LN} -fs `${ECHO_CMD} $$1 $$2 | ${AWK} '{ \
- z=split($$1, a, /\//); x=split($$2, b, /\//); \
- while (a[i] == b[i]) i++; \
- for (q=i; q<x; q++) printf "../"; \
- for (; i<z; i++) printf a[i] "/"; printf a[z]; }'` $$2; \
- shift; shift; \
- done
-.endif
-.else
- @${DO_NADA}
-.endif
-.endif
-
-# Fake installation of package so that user can pkg_delete it later.
-# Also, make sure that an installed port is recognized correctly in
-# accordance to the @pkgdep directive in the packing lists
-
-.if !target(fake-pkg)
-fake-pkg:
-.if !defined(NO_PKG_REGISTER)
- @if [ ! -d ${PKG_DBDIR} ]; then ${RM} -f ${PKG_DBDIR}; ${MKDIR} ${PKG_DBDIR}; fi
- @${RM} -f /tmp/${PKGNAME}-required-by
-.if defined(FORCE_PKG_REGISTER)
- @if [ -e ${PKG_DBDIR}/${PKGNAME}/+REQUIRED_BY ]; then \
- ${CP} ${PKG_DBDIR}/${PKGNAME}/+REQUIRED_BY /tmp/${PKGNAME}-required-by; \
- fi
- @${RM} -rf ${PKG_DBDIR}/${PKGNAME}
-.endif
- @if [ ! -d ${PKG_DBDIR}/${PKGNAME} ]; then \
- ${ECHO_MSG} "===> Registering installation for ${PKGNAME}"; \
- ${MKDIR} ${PKG_DBDIR}/${PKGNAME}; \
- ${PKG_CMD} ${PKG_ARGS} -O ${PKGFILE} > ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \
- ${CP} ${DESCR} ${PKG_DBDIR}/${PKGNAME}/+DESC; \
- ${ECHO_CMD} ${COMMENT:Q} > ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \
- if [ -f ${PKGINSTALL} ]; then \
- ${CP} ${PKGINSTALL} ${PKG_DBDIR}/${PKGNAME}/+INSTALL; \
- fi; \
- if [ -f ${PKGDEINSTALL} ]; then \
- ${CP} ${PKGDEINSTALL} ${PKG_DBDIR}/${PKGNAME}/+DEINSTALL; \
- fi; \
- if [ -f ${PKGREQ} ]; then \
- ${CP} ${PKGREQ} ${PKG_DBDIR}/${PKGNAME}/+REQUIRE; \
- fi; \
- if [ -f ${PKGMESSAGE} ]; then \
- ${CP} ${PKGMESSAGE} ${PKG_DBDIR}/${PKGNAME}/+DISPLAY; \
- ${ECHO_CMD} "@display +DISPLAY" >> ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \
- fi; \
- for dep in `${PKG_INFO} -qf ${PKGNAME} | ${AWK} '/^@pkgdep / {print $$2}' | ${SORT} -u`; do \
- if [ -d ${PKG_DBDIR}/$$dep -a -z `${ECHO_CMD} $$dep | ${GREP} -E ${PKG_IGNORE_DEPENDS}` ]; then \
- if ! ${GREP} ^${PKGNAME}$$ ${PKG_DBDIR}/$$dep/+REQUIRED_BY \
- >/dev/null 2>&1; then \
- ${ECHO_CMD} ${PKGNAME} >> ${PKG_DBDIR}/$$dep/+REQUIRED_BY; \
- fi; \
- fi; \
- done; \
- fi
-.if !defined(NO_MTREE)
- @if [ -f ${MTREE_FILE} ]; then \
- ${CP} ${MTREE_FILE} ${PKG_DBDIR}/${PKGNAME}/+MTREE_DIRS; \
- fi
-.endif
- @if [ -e /tmp/${PKGNAME}-required-by ]; then \
- ${CAT} /tmp/${PKGNAME}-required-by >> ${PKG_DBDIR}/${PKGNAME}/+REQUIRED_BY; \
- ${RM} -f /tmp/${PKGNAME}-required-by; \
- fi
-.else
- @${DO_NADA}
-.endif
-.endif
-
-# Depend is generally meaningless for arbitrary ports, but if someone wants
-# one they can override this. This is just to catch people who've gotten into
-# the habit of typing `make depend all install' as a matter of course.
-#
-.if !target(depend)
-depend:
-.endif
-
-# Same goes for tags
-.if !target(tags)
-tags:
-.endif
-
-.if !defined(NOPRECIOUSMAKEVARS)
-# These won't change, so we can pass them through the environment
-.MAKEFLAGS: \
- ARCH="${ARCH:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
- OPSYS="${OPSYS:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
- OSREL="${OSREL:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
- OSVERSION="${OSVERSION:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
- SYSTEMVERSION="${SYSTEMVERSION:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}"
-.endif
-
-.if !target(config)
-config:
-.if !defined(OPTIONS)
- @${ECHO_MSG} "===> No options to configure"
-.else
-.if ${UID} != 0 && !defined(INSTALL_AS_USER)
- @optionsdir=${OPTIONSFILE}; optionsdir=$${optionsdir%/*}; \
- ${ECHO_MSG} "===> Switching to root credentials to create $${optionsdir}"; \
- (${SU_CMD} "${SH} -c \"${MKDIR} $${optionsdir} 2> /dev/null\"") || \
- (${ECHO_MSG} "===> Cannot create $${optionsdir}, check permissions"; exit 1); \
- ${ECHO_MSG} "===> Returning to user credentials"
-.else
- @(optionsdir=${OPTIONSFILE}; optionsdir=$${optionsdir%/*}; \
- ${MKDIR} $${optionsdir} 2> /dev/null) || \
- (${ECHO_MSG} "===> Cannot create $${optionsdir}, check permissions"; exit 1)
-.endif
- -@if [ -e ${OPTIONSFILE} ]; then \
- . ${OPTIONSFILE}; \
- fi; \
- set -- ${OPTIONS} XXX; \
- while [ $$# -gt 3 ]; do \
- OPTIONSLIST="$${OPTIONSLIST} $$1"; \
- defaultval=$$3; \
- withvar=WITH_$$1; \
- withoutvar=WITHOUT_$$1; \
- withval=$$(eval ${ECHO_CMD} $$\{$${withvar}\}); \
- withoutval=$$(eval ${ECHO_CMD} $$\{$${withoutvar}\}); \
- if [ ! -z "$${withval}" ]; then \
- val=on; \
- elif [ ! -z "$${withoutval}" ]; then \
- val=off; \
- else \
- val=$${defaultval}; \
- fi; \
- DEFOPTIONS="$${DEFOPTIONS} $$1 \"$$2\" $${val}"; \
- shift 3; \
- done; \
- TMPOPTIONSFILE=$$(mktemp -t portoptions); \
- trap "${RM} -f $${TMPOPTIONSFILE}; exit 1" 1 2 3 5 10 13 15; \
- ${SH} -c "${DIALOG} --checklist \"Options for ${PKGNAME:C/-([^-]+)$/ \1/}\" 21 70 15 $${DEFOPTIONS} 2> $${TMPOPTIONSFILE}"; \
- status=$$?; \
- if [ $${status} -ne 0 ] ; then \
- ${RM} -f $${TMPOPTIONSFILE}; \
- ${ECHO_MSG} "===> Options unchanged"; \
- exit 0; \
- fi; \
- if [ ! -e ${TMPOPTIONSFILE} ]; then \
- ${ECHO_MSG} "===> No user-specified options to save for ${PKGNAME}"; \
- exit 0; \
- fi; \
- SELOPTIONS=$$(${CAT} $${TMPOPTIONSFILE}); \
- ${RM} -f $${TMPOPTIONSFILE}; \
- TMPOPTIONSFILE=$$(mktemp -t portoptions); \
- trap "${RM} -f $${TMPOPTIONSFILE}; exit 1" 1 2 3 5 10 13 15; \
- ${ECHO_CMD} "# This file is auto-generated by 'make config'." > $${TMPOPTIONSFILE}; \
- ${ECHO_CMD} "# No user-servicable parts inside!" >> $${TMPOPTIONSFILE}; \
- ${ECHO_CMD} "# Options for ${PKGNAME}" >> $${TMPOPTIONSFILE}; \
- ${ECHO_CMD} "_OPTIONS_READ=${PKGNAME}" >> $${TMPOPTIONSFILE}; \
- for i in $${OPTIONSLIST}; do \
- ${ECHO_CMD} $${SELOPTIONS} | ${GREP} -qw $${i}; \
- if [ $$? -eq 0 ]; then \
- ${ECHO_CMD} WITH_$${i}=true >> $${TMPOPTIONSFILE}; \
- else \
- ${ECHO_CMD} WITHOUT_$${i}=true >> $${TMPOPTIONSFILE}; \
- fi; \
- done; \
- if [ ${UID} != 0 -a "x${INSTALL_AS_USER}" = "x" ]; then \
- ${ECHO_MSG} "===> Switching to root credentials to write ${OPTIONSFILE}"; \
- ${SU_CMD} "${CAT} $${TMPOPTIONSFILE} > ${OPTIONSFILE}"; \
- ${ECHO_MSG} "===> Returning to user credentials"; \
- else \
- ${CAT} $${TMPOPTIONSFILE} > ${OPTIONSFILE}; \
- fi; \
- ${RM} -f $${TMPOPTIONSFILE}
-.endif
-.endif
-
-.if !target(config-recursive)
-config-recursive:
- @${ECHO_MSG} "===> Setting user-specified options for ${PKGNAME} and dependencies";
- @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
- (cd $$dir; ${MAKE} config-conditional); \
- done
-.endif
-
-.if !target(config-conditional)
-config-conditional:
-.if defined(OPTIONS)
-.if exists(${OPTIONSFILE})
-# scan saved options and invalidate them, if the set of options does not match
- @. ${OPTIONSFILE}; \
- set ${OPTIONS} XXX; \
- while [ $$# -gt 3 ]; do \
- withvar=WITH_$$1; \
- withoutvar=WITHOUT_$$1; \
- withval=$$(eval ${ECHO_CMD} $$\{$${withvar}\}); \
- withoutval=$$(eval ${ECHO_CMD} $$\{$${withoutvar}\}); \
- if [ ! -z "$${withval}" ]; then \
- val=on; \
- elif [ ! -z "$${withoutval}" ]; then \
- val=off; \
- else \
- val=missing; \
- fi; \
- if [ "$${val}" = "missing" ]; then \
- OPTIONS_INVALID=yes; \
- fi; \
- shift 3; \
- done; \
- if [ "$${OPTIONS_INVALID}" = "yes" ]; then \
- cd ${.CURDIR} && ${MAKE} config; \
- fi;
-.else
- cd ${.CURDIR} && ${MAKE} config;
-.endif
-.endif
-.endif
-
-.if !target(showconfig)
-showconfig:
-.if defined(OPTIONS)
- @${ECHO_MSG} "===> The following configuration options are available for ${PKGNAME}:"
- -@if [ -e ${OPTIONSFILE} ]; then \
- . ${OPTIONSFILE}; \
- fi; \
- set -- ${OPTIONS} XXX; \
- while [ $$# -gt 3 ]; do \
- defaultval=$$3; \
- withvar=WITH_$$1; \
- withoutvar=WITHOUT_$$1; \
- withval=$$(eval ${ECHO_CMD} $$\{$${withvar}\}); \
- withoutval=$$(eval ${ECHO_CMD} $$\{$${withoutvar}\}); \
- if [ ! -z "$${withval}" ]; then \
- val=on; \
- elif [ ! -z "$${withoutval}" ]; then \
- val=off; \
- else \
- val="$${defaultval} (default)"; \
- fi; \
- ${ECHO_MSG} " $$1=$${val} \"$$2\""; \
- shift 3; \
- done
- @${ECHO_MSG} "===> Use 'make config' to modify these settings"
-.endif
-.endif
-
-.if !target(showconfig-recursive)
-showconfig-recursive:
- @${ECHO_MSG} "===> The following configuration options are available for ${PKGNAME} and dependencies";
- @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
- (cd $$dir; ${MAKE} showconfig); \
- done
-.endif
-
-.if !target(rmconfig)
-rmconfig:
-.if defined(OPTIONS) && exists(${OPTIONSFILE})
- -@${ECHO_MSG} "===> Removing user-configured options for ${PKGNAME}"; \
- optionsdir=${OPTIONSFILE}; optionsdir=$${optionsdir%/*}; \
- if [ ${UID} != 0 -a "x${INSTALL_AS_USER}" = "x" ]; then \
- ${ECHO_MSG} "===> Switching to root credentials to remove ${OPTIONSFILE} and $${optionsdir}"; \
- ${SU_CMD} "${RM} -f ${OPTIONSFILE} ; \
- ${RMDIR} $${optionsdir}"; \
- ${ECHO_MSG} "===> Returning to user credentials"; \
- else \
- ${RM} -f ${OPTIONSFILE}; \
- ${RMDIR} $${optionsdir}; \
- fi
-.else
- @${ECHO_MSG} "===> No user-specified options configured for ${PKGNAME}"
-.endif
-.endif
-
-.if !target(rmconfig-recursive)
-rmconfig-recursive:
- @${ECHO_MSG} "===> Removing user-specified options for ${PKGNAME} and dependencies";
- @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
- (cd $$dir; ${MAKE} rmconfig); \
- done
-.endif
-
-desktop-categories:
- @categories=""; \
- for native_category in ${CATEGORIES}; do \
- c=""; \
- case $$native_category in \
- accessibility) c="Accessibility Utility" ;; \
- archivers) c="Archiving" ;; \
- astro) c="Astronomy Science Education" ;; \
- audio) c="Audio AudioVideo" ;; \
- benchmarks) c="System" ;; \
- biology) c="Biology Science Education" ;; \
- cad) c="Engineering" ;; \
- databases) c="Database" ;; \
- deskutils) c="Utility" ;; \
- devel) c="Development" ;; \
- dns) c="Network" ;; \
- elisp) c="Development" ;; \
- emulators) c="Emulator" ;; \
- finance) c="Finance Office" ;; \
- ftp) c="FileTransfer Network" ;; \
- games) c="Game" ;; \
- gnome) c="GNOME GTK" ;; \
- graphics) c="Graphics" ;; \
- hamradio) c="HamRadio" ;; \
- haskell) c="Development" ;; \
- ipv6) c="Network" ;; \
- irc) c="IRCClient Network" ;; \
- java) c="Java Development" ;; \
- kde) c="KDE QT" ;; \
- lang) c="Development" ;; \
- lisp) c="Development" ;; \
- mail) c="Email Office Network" ;; \
- mbone) c="Network AudioVideo" ;; \
- multimedia) c="AudioVideo" ;; \
- net) c="Network" ;; \
- net-im) c="InstantMessaging Network" ;; \
- net-mgmt) c="Network" ;; \
- net-p2p) c="P2P Network" ;; \
- news) c="News" ;; \
- pear) c="WebDevelopment Development" ;; \
- perl5) c="Development" ;; \
- python) c="Development" ;; \
- ruby) c="Development" ;; \
- rubygems) c="Development" ;; \
- scheme) c="Development" ;; \
- science) c="Science Education" ;; \
- security) c="Security System" ;; \
- shells) c="Shell" ;; \
- sysutils) c="System Utility" ;; \
- tcl*|tk*) c="Development" ;; \
- www) c="Network" ;; \
- x11-clocks) c="Clock Utility" ;; \
- x11-fm) c="FileManager" ;; \
- xfce) c="GTK" ;; \
- zope) c="WebDevelopment Development" ;; \
- esac; \
- if [ -n "$$c" ]; then \
- categories="$$categories $$c"; \
- fi; \
- done; \
- if [ -n "$$categories" ]; then \
- for c in Application $$categories; do ${ECHO_MSG} "$$c"; done \
- | ${SORT} -u | ${TR} '\n' ';'; \
- ${ECHO_MSG}; \
- fi
-
-VALID_DESKTOP_CATEGORIES+= Application Core Development Building Debugger IDE \
- GUIDesigner Profiling RevisionControl Translation Office Calendar \
- ContactManagement Database Dictionary Chart Email Finance FlowChart PDA \
- ProjectManagement Presentation Spreadsheet WordProcessor Graphics \
- 2DGraphics VectorGraphics RasterGraphics 3DGraphics Scanning OCR \
- Photography Viewer Settings DesktopSettings HardwareSettings \
- PackageManager Network Dialup InstantMessaging IRCClient FileTransfer \
- HamRadio News P2P RemoteAccess Telephony WebBrowser WebDevelopment \
- AudioVideo Audio Midi Mixer Sequencer Tuner Video TV AudioVideoEditing \
- Player Recorder DiscBurning Game ActionGame AdventureGame ArcadeGame \
- BoardGame BlocksGame CardGame KidsGame LogicGame RolePlaying Simulation \
- SportsGame StrategyGame Education Art Construction Music Languages \
- Science Astronomy Biology Chemistry Geology Math MedicalSoftware Physics \
- Teaching Amusement Applet Archiving Electronics Emulator Engineering \
- FileManager Shell Screensaver TerminalEmulator TrayIcon System Filesystem \
- Monitor Security Utility Accessibility Calculator Clock TextEditor KDE \
- GNOME GTK Qt Motif Java ConsoleOnly AdvancedSettings
-
-check-desktop-entries:
-.if defined(DESKTOP_ENTRIES)
- @set -- ${DESKTOP_ENTRIES} XXX; \
- if [ `${EXPR} \( $$# - 1 \) % 6` -ne 0 ]; then \
- ${ECHO_MSG} "${PKGNAME}: Makefile error: the DESKTOP_ENTRIES list must contain one or more groups of 6 elements"; \
- exit 1; \
- fi; \
- num=1; \
- while [ $$# -gt 6 ]; do \
- entry="#$$num"; \
- if [ -n "$$4" ]; then \
- entry="$$entry ($$4)"; \
- elif [ -n "$$1" ]; then \
- entry="$$entry ($$1)"; \
- fi; \
- if [ -z "$$1" ]; then \
- ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 1 (Name) is empty"; \
- exit 1; \
- fi; \
- if [ -z "$$4" ]; then \
- ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 4 (Exec) is empty"; \
- exit 1; \
- fi; \
- if [ -n "$$5" ]; then \
- for c in `${ECHO_CMD} "$$5" | ${TR} ';' ' '`; do \
- if ! ${ECHO_CMD} ${VALID_DESKTOP_CATEGORIES} | ${GREP} -wq $$c; then \
- ${ECHO_CMD} "${PKGNAME}: Makefile error: in desktop entry $$entry: category $$c is not a valid desktop category"; \
- exit 1; \
- fi; \
- done; \
- if ! ${ECHO_CMD} "$$5" | ${GREP} -q ';$$'; then \
- ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 5 (Categories) does not end with a semicolon"; \
- exit 1; \
- fi; \
- else \
- if [ -z "`cd ${.CURDIR} && ${MAKE} desktop-categories`" ]; then \
- ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 5 (Categories) is empty and could not be deduced from the CATEGORIES variable"; \
- exit 1; \
- fi; \
- fi; \
- if [ -z "$$6" ]; then \
- ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 6 (StartupNotify) is empty"; \
- exit 1; \
- fi; \
- if [ "x$$6" != "xtrue" ] && [ "x$$6" != "xfalse" ]; then \
- ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 6 (StartupNotify) is not \"true\" or \"false\""; \
- exit 1; \
- fi; \
- shift 6; \
- num=`${EXPR} $$num + 1`; \
- done
-.else
- @${DO_NADA}
-.endif
-
-.if !target(install-desktop-entries)
-install-desktop-entries:
-.if defined(DESKTOP_ENTRIES)
- @(${MKDIR} "${DESKTOPDIR}" 2> /dev/null) || \
- (${ECHO_MSG} "===> Cannot create ${DESKTOPDIR}, check permissions"; exit 1)
- @set -- ${DESKTOP_ENTRIES} XXX; \
- if [ -z "${_DESKTOPDIR_REL}" ]; then \
- ${ECHO_CMD} "@cwd ${DESKTOPDIR}" >> ${TMPPLIST}; \
- fi; \
- while [ $$# -gt 6 ]; do \
- filename="`${ECHO_CMD} "$$4" | ${TR} -cd [:alnum:]`.desktop"; \
- pathname="${DESKTOPDIR}/$$filename"; \
- categories="$$5"; \
- if [ -z "$$categories" ]; then \
- categories="`cd ${.CURDIR} && ${MAKE} desktop-categories`"; \
- fi; \
- ${ECHO_CMD} "${_DESKTOPDIR_REL}$$filename" >> ${TMPPLIST}; \
- ${ECHO_CMD} "[Desktop Entry]" > $$pathname; \
- ${ECHO_CMD} "Type=Application" >> $$pathname; \
- ${ECHO_CMD} "Version=0.9.4" >> $$pathname; \
- ${ECHO_CMD} "Encoding=UTF-8" >> $$pathname; \
- ${ECHO_CMD} "Name=$$1" >> $$pathname; \
- if [ -n "$$2" ]; then \
- ${ECHO_CMD} "Comment=$$2" >> $$pathname; \
- fi; \
- if [ -n "$$3" ]; then \
- ${ECHO_CMD} "Icon=$$3" >> $$pathname; \
- fi; \
- ${ECHO_CMD} "Exec=$$4" >> $$pathname; \
- ${ECHO_CMD} "Categories=$$categories" >> $$pathname; \
- ${ECHO_CMD} "StartupNotify=$$6" >> $$pathname; \
- shift 6; \
- done; \
- ${ECHO_CMD} "@unexec rmdir ${DESKTOPDIR} 2>/dev/null || true" >> ${TMPPLIST}; \
- if [ -z "${_DESKTOPDIR_REL}" ]; then \
- ${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \
- fi
-.else
- @${DO_NADA}
-.endif
-.endif
-
-.if !target(check-license)
-check-license:
- @${DO_NADA}
-.endif
-
-.if !target(ask-license)
-ask-license:
- @${DO_NADA}
-.endif
-
-.if !target(install-license)
-install-license:
- @${DO_NADA}
-.endif
-
-.endif
-# End of post-makefile section.
-
-.endif
-# End of the DESTDIR if statement
Deleted: branches/experimental/TODO
==============================================================================
--- branches/experimental/TODO Tue Jun 26 06:02:28 2012 (r804)
+++ /dev/null 00:00:00 1970 (deleted)
@@ -1,4 +0,0 @@
-List of TODO:
-
-Thunderbird 3
-Flock update to 2.0X
\ No newline at end of file
Deleted: branches/experimental/www/firefox-nightly/Makefile.webplugins
==============================================================================
--- branches/experimental/www/firefox-nightly/Makefile.webplugins Tue Jun 26 06:02:28 2012 (r804)
+++ /dev/null 00:00:00 1970 (deleted)
@@ -1,226 +0,0 @@
-#-*- mode: makefile; tab-width: 4; -*
-# ex:ts=4
-#
-# New ports collection makefile for: npapi infrastructure
-# Date created: 27 June 2006
-# Whom: Andrew Pantyukhin <infofarmer@FreeBSD.org>
-#
-# $FreeBSD: ports/www/firefox/Makefile.webplugins,v 1.1 2009/01/10 02:45:41 mezz Exp $
-# $MCom: ports-stable/www/firefox/Makefile.webplugins,v 1.14 2008/11/12 17:55:09 mezz Exp $
-#
-
-# MAINTAINER= gnome@FreeBSD.org
-#
-# Documentation and examples:
-#
-# Makefile.webplugins will create symlinks automatically for each supported
-# applications that supports the webplugins framework. Also, it will remove
-# these symlinks when the plug-in port is uninstalled.
-#
-# USE_WEBPLUGINS - Specify a list of application(s) that this plug-in
-# port supports. For each of these applications, a
-# symlink will be created in
-# lib/browser_plugins/symlinks. See
-# WEBPLUGINS_APPS_ALL_* below for the list of
-# supported applications.
-# Default: USE_WEBPLUGINS=${WEBPLUGINS_APPS_ALL} (all
-# applications)
-#
-# WEBPLUGINS_NAME - If your port installs file(s) in ${WEBPLUGINS_DIR},
-# then you can tweak WEBPLUGINS_NAME to change the
-# name of the directory
-# (lib/browser_plugins/symlinks/WEBPLUGINS_NAME).
-# Default: WEBPLUGINS_NAME=${PKGBASE}
-#
-# WEBPLUGINS_FILES - The plug-in file(s) that are going to be linked
-# in lib/browser_plugins/symlinks/*/. It cannot
-# be empty or the port will set IGNORE.
-#
-# WEBPLUGINS_DIR - The directory where the plug-in file(s) can be
-# found. Each plug-in file in WEBPLUGINS_FILES
-# must be found in WEBPLUGINS_DIR. If your port
-# does not install in WEBPLUGINS_DIR, but in its own
-# path. You will need to specify that here or
-# symlinks will be created to non-existent files.
-# Default: WEBPLUGINS_DIR?=${WEBPLUGINS_LIBDIR}/${WEBPLUGINS_NAME}
-#
-#
-# The USE_WEBPLUGINS supports wildcards, native, and linux; so you can do any
-# of the following:
-#
-# USE_WEBPLUGINS=gecko* (Supports gecko18 and gecko19.)
-# USE_WEBPLUGINS=native (Supports gecko*, opera*, and webkit-gtk2)
-# USE_WEBPLUGINS=linux (Supports linux-*)
-# USE_WEBPLUGINS=opera webkit-gtk2
-#
-# Example to add in Makefile and pkg-plist if the plug-in file(s) install in
-# WEBPLUGINS_DIR, and if your port does this manually:
-#
-# Makefile:
-# ------------------------------------------------------
-# [...]
-# USE_WEBPLUGINS=gecko*
-# WEBPLUGINS_FILES=fooplugin.so fooplugin.xpi
-#
-# .include <bsd.port.pre.mk>
-# .include "${PORTSDIR}/www/firefox/Makefile.webplugins"
-#
-# post-install:
-# ${MKDIR} ${WEBPLUGINS_DIR}
-# ${INSTALL_DATA} ${WEBPLUGINS_FILES:S,^,${WRKSRC}/plugins/,} \
-# ${WEBPLUGINS_DIR}
-#
-# .include <bsd.port.post.mk>
-# ------------------------------------------------------
-#
-# You do not need to add lib/browser_plugins and lib/browser_plugins/symlinks
-# in pkg-plist, because they will be removed automatically.
-#
-# pkg-plist:
-# ------------------------------------------------------
-# [...]
-# %%WEBPLUGINS_DIR%%/fooplugin.so
-# %%WEBPLUGINS_DIR%%/fooplugin.xpi
-# @dirrmtry %%WEBPLUGINS_DIR%%
-# ------------------------------------------------------
-#
-# Here is what it will look like when it creates the symlinks:
-#
-# ------------------------------------------------------
-# /usr/local/lib/browser_plugins/symlinks/gecko18/fooplugin.so -> /usr/local/lib/browser_plugins/application/fooplugin.so
-# /usr/local/lib/browser_plugins/symlinks/gecko18/fooplugin.xpi -> /usr/local/lib/browser_plugins/application/fooplugin.xpi
-# /usr/local/lib/browser_plugins/symlinks/gecko19/fooplugin.so -> /usr/local/lib/browser_plugins/application/fooplugin.so
-# /usr/local/lib/browser_plugins/symlinks/gecko19/fooplugin.xpi -> /usr/local/lib/browser_plugins/application/fooplugin.xpi
-# ------------------------------------------------------
-#
-# If your port uses libtool, and installs any *.a and *.la files, do not add
-# these files to WEBPLUGINS_FILES. WEBPLUGINS_FILES should be *.so or/and
-# *.xpi ONLY.
-#
-# Example to add in Makefile and pkg-plist if your port installs plug-ins in
-# its own directory, and you need to set WEBPLUGINS_DIR.
-#
-# Makefile:
-# ------------------------------------------------------
-# [...]
-# USE_WEBPLUGINS=gecko*
-# WEBPLUGINS_DIR=#{PREFIX}/lib/application
-# WEBPLUGINS_FILES=fooplugin.so fooplugin.xpi
-#
-# .include <bsd.port.pre.mk>
-# .include "${PORTSDIR}/www/firefox/Makefile.webplugins"
-#
-# [...]
-#
-# .include <bsd.port.post.mk>
-# ------------------------------------------------------
-#
-# As for the pkg-plist, it should only include the actual files your
-# port installs:
-#
-# pkg-plist:
-# ------------------------------------------------------
-# [...]
-# lib/application/fooplugin.a
-# lib/application/fooplugin.la
-# lib/application/fooplugin.so
-# lib/application/fooplugin.xpi
-# @dirrm lib/application
-# ------------------------------------------------------
-#
-# Here is what it will look like when it creates symlinks:
-#
-# ------------------------------------------------------
-# /usr/local/lib/browser_plugins/symlinks/gecko18/fooplugin.so -> /usr/local/lib/application/fooplugin.so
-# /usr/local/lib/browser_plugins/symlinks/gecko18/fooplugin.xpi -> /usr/local/lib/application/fooplugin.xpi
-# /usr/local/lib/browser_plugins/symlinks/gecko19/fooplugin.so -> /usr/local/lib/application/fooplugin.so
-# /usr/local/lib/browser_plugins/symlinks/gecko19/fooplugin.xpi -> /usr/local/lib/application/fooplugin.xpi
-# ------------------------------------------------------
-
-WEBPLUGINS_NAME?= ${PKGBASE}
-WEBPLUGINS_FILES?= empty
-WEBPLUGINS_APPS_ALL_LINUX= linux-firefox linux-firefox-devel linux-flock \
- linux-flock-devel linux-mozilla \
- linux-nvu linux-opera linux-opera-devel \
- linux-seamonkey linux-seamonkey-devel \
- linux-sunbird linux-sunbird-devel
-WEBPLUGINS_APPS_ALL_NATIVE= gecko18 gecko19 opera opera-devel webkit-gtk2
-WEBPLUGINS_APPS_ALL= ${WEBPLUGINS_APPS_ALL_LINUX} \
- ${WEBPLUGINS_APPS_ALL_NATIVE}
-
-.if !defined(USE_WEBPLUGINS) || ${USE_WEBPLUGINS} == "yes" || \
- ${USE_WEBPLUGINS} == "*"
-USE_WEBPLUGINS= ${WEBPLUGINS_APPS_ALL}
-.endif
-
-.if !defined(WEBPLUGINS_FILES) || ${WEBPLUGINS_FILES} == "empty" || \
- ${WEBPLUGINS_FILES} == ""
-IGNORE= cannot install: the WEBPLUGINS_FILES is empty, please add plugins file in it and see in www/firefox/Makefile.webplugins for document
-.endif
-
-.for _TEMP_APP__ in ${WEBPLUGINS_APPS_ALL}
-_TEMP_APP_=${_TEMP_APP__}
-_TEMP_FLAG_=0
-. for _TEMP_USE__ in ${USE_WEBPLUGINS}
-_TEMP_USE_=${_TEMP_USE__}
-. if !${_TEMP_APP_:C!${_TEMP_USE_:S/*/.*/:S/?/./}!!} || \
- ( ${_TEMP_APP_:Mlinux-*} && ${_TEMP_USE_:Mlinux} ) || \
- ( ${_TEMP_APP_:Nlinux-*} && ${_TEMP_USE_:Mnative} )
-_TEMP_FLAG_=1
-. endif
-. endfor
-. if ${_TEMP_FLAG_}
-USE_WEBPLUGINS_EXP+= ${_TEMP_APP__}
-. endif
-.endfor
-
-WEBPLUGINS_APPS= ${USE_WEBPLUGINS_EXP:S.^.${LOCALBASE}/lib/.:S.$./plugins.:N*opera*:N*gecko*:N*webkit*}
-WEBPLUGINS_SLDIRS= ${USE_WEBPLUGINS_EXP:S.^.${WEBPLUGINS_SLDIR}/.}
-WEBPLUGINS_LINKFARMS= ${WEBPLUGINS_APPS} ${WEBPLUGINS_SLDIRS}
-
-WEBPLUGINS_LIBDIR= ${PREFIX}/lib/browser_plugins
-WEBPLUGINS_SLDIR= ${WEBPLUGINS_LIBDIR}/symlinks
-WEBPLUGINS_DIR?= ${WEBPLUGINS_LIBDIR}/${WEBPLUGINS_NAME}
-
-PLIST_SUB+= WEBPLUGINS_DIR="${WEBPLUGINS_DIR:S,^${PREFIX}/,,}"
-
-_LNWF= ${WEBPLUGINS_FILES:S,^,${WEBPLUGINS_DIR}/,}
-_Q= 2>/dev/null || true
-_WLD= ${WEBPLUGINS_LIBDIR:S,^${PREFIX},%D,}
-_WLF= ${WEBPLUGINS_LINKFARMS:S,${PREFIX},%D,}
-_WSD= ${WEBPLUGINS_SLDIR:S,^${PREFIX},%D,}
-
-webplugins-post-install:
- @if [ ! -d ${WEBPLUGINS_DIR} ]; then \
- ${ECHO_CMD}; \
- ${ECHO_CMD} "ERROR: The \"${WEBPLUGINS_DIR}\" in WEBPLUGINS_DIR is either a typo or no longer exists. Please make a bug report to ${MAINTAINER} (maintainer)."; \
- ${ECHO_CMD}; \
- else \
- for _f in ${WEBPLUGINS_FILES}; do \
- if [ ! -f ${WEBPLUGINS_DIR}/$${_f} ]; then \
- ${ECHO_CMD}; \
- ${ECHO_CMD} "ERROR: The \"$${_f}\" in WEBPLUGINS_FILES is either a typo or no longer exists. Please make a bug report to ${MAINTAINER} (maintainer)."; \
- ${ECHO_CMD}; \
- fi; \
- done; \
- fi; \
- for _d in ${WEBPLUGINS_LINKFARMS}; do \
- ${INSTALL} -d $${_d}; \
- for _l in ${_LNWF}; do \
- ${LN} -sf $${_l} $${_d}/ ${_Q}; \
- done; \
- done; \
- for _d in ${_WLF}; do \
- ${ECHO_CMD} "@exec ${INSTALL} -d $$_d" >> ${TMPPLIST}; \
- for _l in ${_LNWF}; do \
- ${ECHO_CMD} "@exec ${LN} -sf $$_l $$_d/ ${_Q}" >> ${TMPPLIST}; \
- done; \
- for _f in ${WEBPLUGINS_FILES:S,^,\${_d}/,}; do \
- ${ECHO_CMD} "@unexec ${RM} -f $$_f" >> ${TMPPLIST}; \
- done; \
- ${ECHO_CMD} "@unexec rmdir $$_d ${_Q}" >> ${TMPPLIST}; \
- done
- @${ECHO_CMD} "@unexec rmdir ${_WSD} ${_Q}" >> ${TMPPLIST}
- @${ECHO_CMD} "@unexec rmdir ${_WLD} ${_Q}" >> ${TMPPLIST}
-
-post-install: webplugins-post-install
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201206260602.q5Q62Sa8008162>