Date: Tue, 18 Aug 2020 06:01:15 +0300 From: Furkan Salman <furkan@fkardame.com> To: "Freebsd Arm" <freebsd-arm@freebsd.org> Subject: NanoPi R1 Sample image test Message-ID: <173ff8383c3.114ced33f588171.4981943076988851854@fkardame.com>
next in thread | raw e-mail | index | archive | help
Hello,
I received my NanoPi R1 and NanoPi R2s of which R2s doesn't work I guess so=
was only able to test R1 images from Mr. Ganbold links which are quite old=
.
Here is the boot log which is getting stuck at mountpoint as it fails to mo=
unt opnsense partition with rw access.
U-Boot SPL 2019.01 (Mar 19 2019 - 16:56:16 +0800) =
=20
DRAM: 1024 MiB =
=20
Trying to boot from MMC1 =
=20
=
=20
=
=20
U-Boot 2019.01 (Mar 19 2019 - 16:56:16 +0800) Allwinner Technology =
=20
=
=20
CPU: Allwinner H3 (SUN8I 1680) =
=20
Model: FriendlyArm NanoPi M1 Plus =
=20
DRAM: 1 GiB =
=20
MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 =
=20
Loading Environment from FAT... *** Warning - bad CRC, using default enviro=
nment =20
=
=20
In: serial =
=20
Out: serial =
=20
Err: serial =
=20
Net: No ethernet found. =
=20
starting USB... =
=20
USB0: USB EHCI 1.00 =
=20
USB1: USB OHCI 1.0 =
=20
USB2: USB EHCI 1.00 =
=20
USB3: USB OHCI 1.0 =
=20
USB4: USB EHCI 1.00 =
=20
USB5: USB OHCI 1.0 =
=20
scanning bus 0 for devices... 2 USB Device(s) found =
=20
scanning bus 2 for devices... 1 USB Device(s) found =
=20
scanning bus 4 for devices... 1 USB Device(s) found =
=20
scanning usb for storage devices... 0 Storage Device(s) found =
=20
Hit any key to stop autoboot: 0 =
=20
switch to partitions #0, OK =
=20
mmc0(part 0) is current device =
=20
Scanning mmc 0:1... =
=20
26950 bytes read in 2 ms (12.9 MiB/s) =
=20
Found EFI removable media binary efi/boot/bootarm.efi =
=20
Scanning disks on usb... =
=20
Disk usb0 not ready =
=20
Disk usb1 not ready =
=20
Disk usb2 not ready =
=20
Disk usb3 not ready =
=20
Scanning disks on mmc... =
=20
- ______ ____ _____ _____ =20
| ____| | _ \ / ____| __ \=20
| |___ _ __ ___ ___ | |_) | (___ | | | |
| ___| '__/ _ \/ _ \| _ < \___ \| | | |
| | | | | __/ __/| |_) |____) | |__| |
| | | | | | || | | |
|_| |_| \___|\___||____/|_____/|_____/=20
``` =
`
=EF=BF=BD=EF=BF=BD=E2=95=90=EF=BF=BD=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=
=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=
=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=
=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=
=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=
=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=
=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=
=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=
=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=EF=BF=
=BD-/ =E2=95=90
=EF=BF=BD=E2=95=91 =EF=BF=BD=E2=95=
=91 +o .--` /y:` +.
=EF=BF=BD=E2=95=91 1. Boot Multi user [Enter] =EF=BF=BD=E2=95=
=91 yo`:. :o `+-
=EF=BF=BD=E2=95=91 2. Boot Single user =EF=BF=BD=E2=95=
=91 y/ -/` -o/
=EF=BF=BD=E2=95=91 3. Escape to loader prompt =EF=BF=BD=E2=95=
=91 .- ::/sy+:.
=EF=BF=BD=E2=95=91 4. Reboot =EF=BF=BD=E2=95=
=91 / `-- /
=EF=BF=BD=E2=95=91 =EF=BF=BD=E2=95=
=91 `: :`
=EF=BF=BD=EF=BF=BD=E2=95=91Options: =EF=BF=
=BD=E2=95=91 `: :`
=EF=BF=BD=E2=95=91 5. Kernel: default/kernel (1 of 1) =EF=BF=BD=E2=95=
=91 / /
=EF=BF=BD=E2=95=91 6. Boot Options =EF=BF=BD=E2=95=
=91 .- -.
=EF=BF=BD=E2=95=91 =EF=BF=BD=E2=95=
=91 -- -.
=EF=BF=BD=E2=95=91 =EF=BF=BD=E2=95=
=91 `:` `:`
=EF=BF=BD=E2=95=91 =EF=BF=BD=E2=95=
=91 .-- `--.
=EF=BF=BD=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=
=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=
=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=
=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=EF=BF=BD=E2=95=90=EF=BF=BD=
=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=
=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=EF=BF=BD=E2=95=90=EF=BF=BD=EF=BF=BD=E2=95=
=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=
=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=
=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=
=BD=EF=BF=BD =E2=95=90
Autoboot in 3 seconds, hit [Enter] to boot or any other key to stop =
=20
Autoboot in 2 seconds, hit [Enter] to boot or any other key to stop =
=20
Loading kernel... =
=20
/boot/kernel/kernel text=3D0x853bb0 data=3D0xb5cc8+0x25d778 syms=3D[0x4+0xa=
8e50+0x4+0x10cbbc] =20
Loading configured modules... =
=20
/boot/kernel/if_lagg.ko text=3D0x3f20 text=3D0x7a00 data=3D0x1088+0xf7c sym=
s=3D[0x4+0x23e0+0x4+0x1535] =20
/boot/kernel/ng_pppoe.ko text=3D0x1b20 text=3D0x3f20 data=3D0x1088 syms=3D[=
0x4+0xf70+0x4+0x8b9] =20
loading required module 'netgraph' =
=20
/boot/kernel/netgraph.ko text=3D0x3f54 text=3D0x8f40 data=3D0x1088+0xfec sy=
ms=3D[0x4+0x2550+0x4+0x1de8] =20
/boot/kernel/ng_ppp.ko text=3D0x1df0 text=3D0x4350 data=3D0x1088 syms=3D[0x=
4+0xff0+0x4+0xa59] =20
/boot/kernel/pflog.ko text=3D0xb33 text=3D0x820 data=3D0x1088 syms=3D[0x4+0=
x9e0+0x4+0x748] =20
loading required module 'pf' =
=20
/boot/kernel/pf.ko text=3D0x8108 text=3D0x30c30 data=3D0x3088+0x1074 syms=
=3D[0x4+0x5bf0+0x4+0x3608] =20
/boot/kernel/ng_tcpmss.ko text=3D0xa38 text=3D0x6a0 data=3D0x1088 syms=3D[0=
x4+0x690+0x4+0x48c] =20
/boot/kernel/ng_bpf.ko text=3D0x1580 text=3D0x1320 data=3D0x1088 syms=3D[0x=
4+0x9c0+0x4+0x6c8] =20
/boot/kernel/ng_eiface.ko text=3D0x13e0 text=3D0x1200 data=3D0x1088 syms=3D=
[0x4+0xf10+0x4+0x964] =20
/boot/kernel/ng_ksocket.ko text=3D0x1974 text=3D0x1d10 data=3D0x1088 syms=
=3D[0x4+0x1020+0x4+0x9c7] =20
/boot/kernel/if_gif.ko text=3D0x1e64 text=3D0x3d60 data=3D0x1088+0xfa4 syms=
=3D[0x4+0x1b70+0x4+0xff9] =20
/boot/kernel/if_enc.ko text=3D0xf64 text=3D0x9b0 data=3D0x1088 syms=3D[0x4+=
0xba0+0x4+0xbca] =20
/boot/kernel/ng_tty.ko text=3D0xe1d text=3D0xf50 data=3D0x1088 syms=3D[0x4+=
0xb60+0x4+0x58c] =20
/boot/kernel/ng_tee.ko text=3D0xa98 text=3D0x7c0 data=3D0x1088 syms=3D[0x4+=
0x760+0x4+0x46c] =20
/boot/kernel/ng_car.ko text=3D0xe60 text=3D0x1110 data=3D0x1088 syms=3D[0x4=
+0x970+0x4+0x59d] =20
/boot/kernel/ng_pred1.ko text=3D0xf64 text=3D0xe40 data=3D0x1088 syms=3D[0x=
4+0x8f0+0x4+0x5e1] =20
/boot/kernel/ng_rfc1490.ko text=3D0xa4c text=3D0xbf0 data=3D0x1088 syms=3D[=
0x4+0x810+0x4+0x486] =20
/boot/kernel/ng_socket.ko text=3D0x178f text=3D0x1730 data=3D0x1088+0xf90 s=
yms=3D[0x4+0x12c0+0x4+0xe42] =20
/boot/kernel/ng_pptpgre.ko text=3D0x1c98 text=3D0x2380 data=3D0x1088 syms=
=3D[0x4+0xdc0+0x4+0x8d0] =20
/boot/kernel/ng_deflate.ko text=3D0x1008 text=3D0xe90 data=3D0x1088 syms=3D=
[0x4+0xb10+0x4+0x71f] =20
/boot/kernel/ng_iface.ko text=3D0x177c text=3D0x10a0 data=3D0x1088 syms=3D[=
0x4+0xfa0+0x4+0xae6] =20
/boot/entropy size=3D0x1000 =
=20
/boot/kernel/ng_ether.ko text=3D0x1554 text=3D0x1350 data=3D0x1088+0xf7c sy=
ms=3D[0x4+0xeb0+0x4+0x94b] =20
/boot/kernel/ng_mppc.ko text=3D0xf70 text=3D0x2cc0 data=3D0x1088+0xf7c syms=
=3D[0x4+0xc10+0x4+0x8c1] =20
loading required module 'rc4' =
=20
/boot/kernel/rc4.ko text=3D0x3d7 text=3D0xf8 data=3D0x1068 syms=3D[0x4+0x2a=
0+0x4+0x229] =20
/boot/kernel/ng_pipe.ko text=3D0x14d4 text=3D0x1e40 data=3D0x1088+0xf90 sym=
s=3D[0x4+0xc30+0x4+0x766] =20
/boot/kernel/ng_one2many.ko text=3D0xe4c text=3D0xbc0 data=3D0x1088 syms=3D=
[0x4+0x950+0x4+0x608] =20
/boot/kernel/ng_echo.ko text=3D0x57d text=3D0x160 data=3D0x1088 syms=3D[0x4=
+0x430+0x4+0x302] =20
/boot/kernel/if_tap.ko text=3D0x1d38 text=3D0x2490 data=3D0x1088+0xfac syms=
=3D[0x4+0x15c0+0x4+0xb08] =20
/boot/kernel/ng_lmi.ko text=3D0x111f text=3D0x16e0 data=3D0x1088 syms=3D[0x=
4+0x900+0x4+0x48f] =20
/boot/kernel/ng_l2tp.ko text=3D0x21b8 text=3D0x2990 data=3D0x1088 syms=3D[0=
x4+0xde0+0x4+0x8ce] =20
/boot/kernel/ng_vlan.ko text=3D0xe90 text=3D0xd20 data=3D0x1088 syms=3D[0x4=
+0x8b0+0x4+0x55b] =20
/boot/kernel/if_ure.ko text=3D0x1a20 text=3D0x50f0 data=3D0x1088+0xf80 syms=
=3D[0x4+0x13d0+0x4+0xd26] =20
/boot/kernel/ng_frame_relay.ko text=3D0x857 text=3D0x8d0 data=3D0x1088 syms=
=3D[0x4+0x740+0x4+0x3f2] =20
/boot/kernel/ng_hole.ko text=3D0x850 text=3D0x350 data=3D0x1088 syms=3D[0x4=
+0x5d0+0x4+0x3db] =20
/boot/kernel/if_bridge.ko text=3D0x2cc0 text=3D0x6580 data=3D0x1088+0xf7c s=
yms=3D[0x4+0x2220+0x4+0x16a5] =20
loading required module 'bridgestp' =
=20
/boot/kernel/bridgestp.ko text=3D0x1138 text=3D0x4550 data=3D0x1088+0xf90 s=
yms=3D[0x4+0xf20+0x4+0x870] =20
/boot/kernel/ng_async.ko text=3D0x10d0 text=3D0xe80 data=3D0x1088 syms=3D[0=
x4+0x9d0+0x4+0x64c] =20
/boot/kernel/pfsync.ko text=3D0x2cb4 text=3D0x7b70 data=3D0x1088+0xf7c syms=
=3D[0x4+0x1cb0+0x4+0x12b3] =20
/boot/kernel/carp.ko text=3D0x2dac text=3D0x6110 data=3D0x1088+0xfa4 syms=
=3D[0x4+0x1e40+0x4+0x1333] =20
/boot/kernel/ng_bridge.ko text=3D0x15dc text=3D0x1550 data=3D0x1088+0xf98 s=
yms=3D[0x4+0xb80+0x4+0x7f5] =20
/boot/kernel/if_tun.ko text=3D0x235e text=3D0x2960 data=3D0x1088+0xf9c syms=
=3D[0x4+0x1aa0+0x4+0xdf1] =20
/boot/kernel/ng_UI.ko text=3D0x78f text=3D0x4a0 data=3D0x1088 syms=3D[0x4+0=
x690+0x4+0x396] =20
/boot/kernel/ng_cisco.ko text=3D0xee4 text=3D0xfe0 data=3D0x1088 syms=3D[0x=
4+0xa30+0x4+0x5ad] =20
/boot/kernel/if_gre.ko text=3D0x1e4c text=3D0x3790 data=3D0x1088+0xf9c syms=
=3D[0x4+0x19c0+0x4+0xf24] =20
/boot/kernel/ng_vjc.ko text=3D0x1154 text=3D0x1910 data=3D0x1088 syms=3D[0x=
4+0x9d0+0x4+0x61b] =20
Using DTB provided by EFI at 0x47ef6000. =
=20
Loading DTB overlays: 'sun8i-h3-sid.dtbo,sun8i-h3-ths.dtbo' =
=20
/boot/dtb/overlays/sun8i-h3-sid.dtbo size=3D0x210 =
=20
/boot/dtb/overlays/sun8i-h3-ths.dtbo size=3D0x3ba =
=20
Kernel entry at 0x71000180... =
=20
Kernel args: (null) =
=20
applying DTB overlay '/boot/dtb/overlays/sun8i-h3-sid.dtbo' =
=20
applying DTB overlay '/boot/dtb/overlays/sun8i-h3-ths.dtbo' =
=20
EHCI failed to shut down host controller. =
=20
EHCI failed to shut down host controller. =
=20
EHCI failed to shut down host controller. =
=20
---<<BOOT>>--- =
=20
KDB: debugger backends: ddb =
=20
KDB: current backend: ddb =
=20
Copyright (c) 1992-2019 The FreeBSD Project. =
=20
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 =
=20
The Regents of the University of California. All rights reserved. =
=20
FreeBSD is a registered trademark of The FreeBSD Foundation. =
=20
FreeBSD 13.0-CURRENT #37 r345944M: Tue Apr 23 18:10:40 +08 2019 =
=20
tsgan@beastie:/usr/obj/usr/src/arm.armv7/sys/GENERIC arm =
=20
FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLVM =
8.0.0) =20
WARNING: WITNESS option enabled, expect reduced performance. =
=20
VT: init without driver. =
=20
module_register: cannot register ofwbus/pcib from kernel; already loaded fr=
om kernel =20
Module ofwbus/pcib failed to register: 17 =
=20
module_register: cannot register simplebus/pcib from kernel; already loaded=
from kernel =20
Module simplebus/pcib failed to register: 17 =
=20
CPU: ARM Cortex-A7 r0p5 (ECO: 0x00000000) =
=20
CPU Features: =
=20
Multiprocessing, Thumb2, Security, Virtualization, Generic Timer, VMSAv7,=
=20
PXN, LPAE, Coherent Walk =
=20
Optional instructions: =
=20
SDIV/UDIV, UMULL, SMULL, SIMD(ext) =
=20
LoUU:2 LoC:3 LoUIS:2 =
=20
Cache level 1: =
=20
32KB/64B 4-way data cache WB Read-Alloc Write-Alloc =
=20
32KB/32B 2-way instruction cache Read-Alloc =
=20
Cache level 2: =
=20
512KB/64B 8-way unified cache WB Read-Alloc Write-Alloc =
=20
real memory =3D 1039556608 (991 MB) =
=20
avail memory =3D 997736448 (951 MB) =
=20
No PSCI/SMCCC call function found =
=20
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs =
=20
random: unblocking device. =
=20
random: entropy device external interface =
=20
kbd0 at kbdmux0 =
=20
ofwbus0: <Open Firmware Device Tree> =
=20
aw_ccu0: <Allwinner Clock Control Unit> on ofwbus0 =
=20
clk_fixed0: <Fixed clock> on aw_ccu0 =
=20
clk_fixed1: <Fixed clock> on aw_ccu0 =
=20
clk_fixed2: <Fixed clock> on aw_ccu0 =
=20
simplebus0: <Flattened device tree simple bus> on ofwbus0 =
=20
ccu_h3ng0: <Allwinner H3/H5 Clock Control Unit NG> mem 0x1c20000-0x1c203ff =
on simplebus0 =20
regfix0: <Fixed Regulator> on ofwbus0 =
=20
regfix1: <Fixed Regulator> on ofwbus0 =
=20
regfix2: <Fixed Regulator> on ofwbus0 =
=20
regfix3: <Fixed Regulator> on ofwbus0 =
=20
ccu_sun8i_r0: <Allwinner SUN8I_R Clock Control Unit NG> mem 0x1f01400-0x1f0=
14ff on simplebus0 =20
aw_sid0: <Allwinner Secure ID Controller> mem 0x1c14000-0x1c143ff on simple=
bus0 =20
gic0: <ARM Generic Interrupt Controller> mem 0x1c81000-0x1c81fff,0x1c82000-=
0x1c83fff,0x1c84000-0x1c85fff,0x10
gic0: pn 0x1, arch 0x2, rev 0x1, implementer 0x43b irqs 160 =
=20
gpio0: <Allwinner GPIO/Pinmux controller> mem 0x1c20800-0x1c20bff irq 19,20=
on simplebus0 =20
gpiobus0: <OFW GPIO bus> on gpio0 =
=20
gpio1: <Allwinner GPIO/Pinmux controller> mem 0x1f02c00-0x1f02fff irq 44 on=
simplebus0 =20
gpiobus1: <OFW GPIO bus> on gpio1 =
=20
rtc0: <Allwinner RTC> mem 0x1f00000-0x1f00053 irq 40,41 on simplebus0 =
=20
rtc0: registered as a time-of-day clock, resolution 1.000000s =
=20
generic_timer0: <ARMv7 Generic Timer> irq 0,1,2,3 on ofwbus0 =
=20
Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000 =
=20
Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000 =
=20
aw_syscon0: <Allwinner syscon> mem 0x1c00000-0x1c00fff on simplebus0 =
=20
awusbphy0: <Allwinner USB PHY> mem 0x1c19400-0x1c1942b,0x1c1a800-0x1c1a803,=
0x1c1b800-0x1c1b803,0x1c1c800-0x10
aw_thermal0: <Allwinner Thermal Sensor Controller> mem 0x1c25000-0x1c250ff =
irq 4 on simplebus0 =20
a31dmac0: <Allwinner DMA controller> mem 0x1c02000-0x1c02fff irq 5 on simpl=
ebus0 =20
aw_mmc0: <Allwinner Integrated MMC/SD controller> mem 0x1c0f000-0x1c0ffff i=
rq 7 on simplebus0 =20
mmc0: <MMC/SD bus> on aw_mmc0 =
=20
aw_mmc1: <Allwinner Integrated MMC/SD controller> mem 0x1c10000-0x1c10fff i=
rq 8 on simplebus0 =20
mmc1: <MMC/SD bus> on aw_mmc1 =
=20
aw_mmc2: <Allwinner Integrated MMC/SD controller> mem 0x1c11000-0x1c11fff i=
rq 9 on simplebus0 =20
mmc2: <MMC/SD bus> on aw_mmc2 =
=20
ehci0: <Allwinner Integrated USB 2.0 controller> mem 0x1c1b000-0x1c1b0ff ir=
q 13 on simplebus0 =20
usbus0: EHCI version 1.0 =
=20
usbus0 on ehci0 =
=20
ohci0: <Generic OHCI Controller> mem 0x1c1b400-0x1c1b4ff irq 14 on simplebu=
s0 =20
usbus1 on ohci0 =
=20
ehci1: <Allwinner Integrated USB 2.0 controller> mem 0x1c1c000-0x1c1c0ff ir=
q 15 on simplebus0 =20
usbus2: EHCI version 1.0 =
=20
usbus2 on ehci1 =
=20
ohci1: <Generic OHCI Controller> mem 0x1c1c400-0x1c1c4ff irq 16 on simplebu=
s0 =20
usbus3 on ohci1 =
=20
ehci2: <Allwinner Integrated USB 2.0 controller> mem 0x1c1d000-0x1c1d0ff ir=
q 17 on simplebus0 =20
usbus4: EHCI version 1.0 =
=20
usbus4 on ehci2 =
=20
ohci2: <Generic OHCI Controller> mem 0x1c1d400-0x1c1d4ff irq 18 on simplebu=
s0 =20
usbus5 on ohci2 =
=20
gpioc0: <GPIO controller> on gpio0 =
=20
awg0: <Allwinner Gigabit Ethernet> mem 0x1c30000-0x1c3ffff irq 23 on simple=
bus0 =20
miibus0: <MII bus> on awg0 =
=20
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0 =
=20
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseT=
X-FDX, 100baseTX-FDX-flow, 1000baw
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 7 on miibus0 =
=20
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseT=
X-FDX, 100baseTX-FDX-flow, 1000baw
awg0: Ethernet address: 02:02:53:04:22:5c =
=20
aw_wdog0: <Allwinner A31 Watchdog> mem 0x1c20ca0-0x1c20cbf irq 26 on simple=
bus0 =20
uart0: console (115384,n,8,1)mem 0x1c28000-0x1c283ff irq 31 on simplebus0 =
=20
uart1: <16750 or compatible> mem 0x1c28c00-0x1c28fff irq 34 on simplebus0 =
=20
aw_ir0: <Allwinner CIR controller> mem 0x1f02000-0x1f023ff irq 42 on simple=
bus0 =20
aw_ir0: hwreset_get_by_ofw_idx =3D 0 =
=20
gpioc1: <GPIO controller> on gpio1 =
=20
cpulist0: <Open Firmware CPU Group> on ofwbus0 =
=20
cpu0: <Open Firmware CPU> on cpulist0 =
=20
cpu1: <Open Firmware CPU> on cpulist0 =
=20
cpu2: <Open Firmware CPU> on cpulist0 =
=20
cpu3: <Open Firmware CPU> on cpulist0 =
=20
gpioled0: <GPIO LEDs> on ofwbus0 =
=20
cryptosoft0: <software crypto> =
=20
Timecounters tick every 1.000 msec =
=20
usbus0: 480Mbps High Speed USB v2.0 =
=20
usbus1: 12Mbps Full Speed USB v1.0 =
=20
usbus2: 480Mbps High Speed USB v2.0 =
=20
usbus3: 12Mbps Full Speed USB v1.0 =
=20
usbus4: 480Mbps High Speed USB v2.0 =
=20
ugen1.1: <Generic OHCI root HUB> at usbus1 =
=20
uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 =
=20
ugen2.1: <Allwinner EHCI root HUB> at usbus2 =
=20
uhub1: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus=
2 =20
ugen3.1: <Generic OHCI root HUB> at usbus3 =
=20
uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 =
=20
ugen4.1: <Allwinner EHCI root HUB> at usbus4 =
=20
uhub3: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus=
4 =20
ugen0.1: <Allwinner EHCI root HUB> at usbus0 =
=20
uhub4: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus=
0 =20
usbus5: 12Mbps Full Speed USB v1.0 =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
ugen5.1: <Generic OHCI root HUB> at usbus5 =
=20
uhub5: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_ERR AW_MMC_INT_RESP_CRC_ERR =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
mmc0: CMD3 failed, RESULT: 1 =
=20
mmc0: Error setting RCA 1 =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
mmc1: No compatible cards found on bus =
=20
aw_mmc1: Spurious interrupt - no active request, rint: 0x00000004 =
=20
=
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
uhub0: 1 port with 1 removable, self powered =
=20
uhub2: 1 port with 1 removable, self powered =
=20
AW_MMC_INT_DATA_END_BIT_ERR =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
AW_MMC_INT_RESP_TIMEOUT =
=20
mmcsd0: 8GB <MMCHC 8GTF4R 0.6 SN 979C5F19 MFG 02/2020 by 21 0x0000> at mmc2=
52.0MHz/8bit/32768-block =20
mmcsd0boot0: 4MB partion 1 at mmcsd0 =
=20
mmcsd0boot1: 4MB partion 2 at mmcsd0 =
=20
mmcsd0rpmb: 524kB partion 3 at mmcsd0 =
=20
Release APs =
=20
WARNING: WITNESS option enabled, expect reduced performance. =
=20
uhub5: 1 port with 1 removable, self powered =
=20
Trying to mount root from ufs:/dev/ufs/OPNsense [rw]... =
=20
Root mount waiting for: usbus4 usbus2 usbus0 =
=20
uhub3: 1 port with 1 removable, self powered =
=20
uhub1: 1 port with 1 removable, self powered =
=20
uhub4: 1 port with 1 removable, self powered =
=20
ugen0.2: <Realtek USB 10/100 LAN> at usbus0 =
=20
ure0 on uhub4 =
=20
ure0: <Realtek USB 10/100 LAN, class 0/0, rev 2.10/20.00, addr 2> on usbus0=
=20
mountroot: waiting for device /dev/ufs/OPNsense... =
=20
ure0: MAC assigned randomly =
=20
miibus1: <MII bus> on ure0 =
=20
rlphy0: <RTL8201E 10/100 media interface> PHY 0 on miibus1 =
=20
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto =
=20
ue0: <USB Ethernet> on ure0 =
=20
ue0: Ethernet address: aa:45:b5:64:b1:70 =
=20
Mounting from ufs:/dev/ufs/OPNsense failed with error 19. =
=20
=
=20
Loader variables: =
=20
vfs.root.mountfrom=3Dufs:/dev/ufs/OPNsense =
=20
vfs.root.mountfrom.options=3Drw =
=20
=
=20
Manual root filesystem specification: =
=20
<fstype>:<device> [options] =
=20
Mount <device> using filesystem <fstype> =
=20
and with the specified (optional) option list. =
=20
=
=20
eg. ufs:/dev/da0s1a =
=20
zfs:zroot/ROOT/default =
=20
cd9660:/dev/cd0 ro =
=20
(which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /) =
=20
=
=20
? List valid disk boot devices =
=20
. Yield 1 second (for background tasks) =
=20
<empty line> Abort manual input =
=20
=
=20
mountroot> ls =
=20
Invalid file system specification. =
=20
=
=20
mountroot>=20
>From the above logs I see that both the ethernet cards were detected.
I then tried the FreeBSD image from the same link and it have the same issu=
e.
Link:=C2=A0https://people.freebsd.org/~ganbold/
Is anyone else working on armv7 NanoPi R1?
From owner-freebsd-arm@freebsd.org Tue Aug 18 04:18:15 2020
Return-Path: <owner-freebsd-arm@freebsd.org>
Delivered-To: freebsd-arm@mailman.nyi.freebsd.org
Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1])
by mailman.nyi.freebsd.org (Postfix) with ESMTP id 18B563AD071
for <freebsd-arm@mailman.nyi.freebsd.org>;
Tue, 18 Aug 2020 04:18:15 +0000 (UTC)
(envelope-from ganbold@gmail.com)
Received: from mail-ot1-x32f.google.com (mail-ot1-x32f.google.com
[IPv6:2607:f8b0:4864:20::32f])
(using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)
key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256
client-signature RSA-PSS (2048 bits) client-digest SHA256)
(Client CN "smtp.gmail.com", Issuer "GTS CA 1O1" (verified OK))
by mx1.freebsd.org (Postfix) with ESMTPS id 4BVyM94xmkz4gmx
for <freebsd-arm@freebsd.org>; Tue, 18 Aug 2020 04:18:13 +0000 (UTC)
(envelope-from ganbold@gmail.com)
Received: by mail-ot1-x32f.google.com with SMTP id 93so15266577otx.2
for <freebsd-arm@freebsd.org>; Mon, 17 Aug 2020 21:18:13 -0700 (PDT)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025;
h=mime-version:references:in-reply-to:from:date:message-id:subject:to
:cc; bh=oH9MJq8culAZ3j5Pdr2C3JiLb5J6ver+nybvzmFoZI8=;
b=G4eMDewrQgBuszKcUE4LLRlwbGGgdHOVmhIkJEZXRMSpneoMKjXeD0MJmjlwLHX2IW
iTfkxK6JsDl2pgaKTq0S4OU5WntuO+xW+XilrOkRzPVv+6vV8NXVgM3Al+p0ypsPaTaY
+GiD/a42DzJrNXU6oTaZXtqAlPe8IR2n1yWgZa1gwrG8hkH010W5EfA+p+Sn6R040432
RUnXEcSGS4RahS/XKEDMVtoG3mngWtrt5Pv9+uyGVC/jCNeYWvWW1wJUA0Icp0ZyqqsX
5+b9aUDWaFfAr411B9gRIZTH//eXuwSOuDK2fnSlT8IZJ9DkUUh9BxTUD31k47uQKJQ9
cZjg==
X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
d=1e100.net; s=20161025;
h=x-gm-message-state:mime-version:references:in-reply-to:from:date
:message-id:subject:to:cc;
bh=oH9MJq8culAZ3j5Pdr2C3JiLb5J6ver+nybvzmFoZI8=;
b=QcEpBe4rsz0kcQBjx73wU+HFXrBP5Lfs7raRghmGif5nSQwKxw21WvYhz39jQ8LPL3
u8xOozLTSlqTnDeM2TzCJ+7xfi1LZoJAEAMAxrqVOJaP0Huyuv5/Ztqt38/4AjGYjQ7V
xd2wPJtjvZF7ezLcVaNTQyywd8wvn3eSOcs3RX1OZLbTStXBhxLBJsgeuwjN92re0BMl
bX5SVAUj7feOY5S6z3kjRCxhIf2SLscA5MBqQ2J0SkZDj0SQWo0/eDDcjS4iroDcFFe8
2FSLp+3UUu/5YW9XignmwMRPOF72+uDVVcS4vG0YXuwp8JniuipjQL2yHRdBAqgt2rGM
IkWg==
X-Gm-Message-State: AOAM530M+HT0SrgwKMrV8CMhh+A4pPXDClSJyyVYMVgU7/L7JvRYOdbA
rt7bGopuoDJt5fMgSS6uBKnU8c9bvXj8D2CaHIcIVcGMSvs=
X-Google-Smtp-Source: ABdhPJzZ+P8TtTXMmzByXeqsqI4+UsjQpMSbGZJsQ4Q4VxdFg4ERS7GG53pvMsOUv5wp/5eqYI0D8VfL2f+4mNLm14I=
X-Received: by 2002:a9d:639a:: with SMTP id w26mr13700288otk.140.1597724292044;
Mon, 17 Aug 2020 21:18:12 -0700 (PDT)
MIME-Version: 1.0
References: <173ff8383c3.114ced33f588171.4981943076988851854@fkardame.com>
In-Reply-To: <173ff8383c3.114ced33f588171.4981943076988851854@fkardame.com>
From: Ganbold Tsagaankhuu <ganbold@gmail.com>
Date: Tue, 18 Aug 2020 12:18:00 +0800
Message-ID: <CAGtf9xPxe713X5KVFTsvaCvQwpvMfNMqx0us2KVt7gTmm0axTQ@mail.gmail.com>
Subject: Re: NanoPi R1 Sample image test
To: Furkan Salman <furkan@fkardame.com>
Cc: Freebsd Arm <freebsd-arm@freebsd.org>
ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=freebsd.org;
s=dkim; t=1597724294;
h=from:from:reply-to:subject:subject:date:date:message-id:message-id:
to:to:cc:cc:mime-version:mime-version:content-type:content-type:
in-reply-to:in-reply-to:references:references:dkim-signature;
bh=oH9MJq8culAZ3j5Pdr2C3JiLb5J6ver+nybvzmFoZI8=;
b=uAc+tzGk0+/ptjpu2pmwdOe/8wCeK3UwWo2MgsoEWqGGs6svQ40J2HvObG6GAekod2efqB
Dp2EF4pP0Hnp6mRrw6vANC7qxoIqSCz8hLpC/oI9qsOWvcHFNfVfqE9uRQkIOsYNB+41AC
fY64M8cenqh6UqcUftJKiabyQWGoRLuctclgoBm7NgVZoXInXPMjSPCBVtRvsRP2KVvUpx
zQu8sIHmjaMKDoi1spo3k6Uwh0dduy+Ooirq5MbmY4ZBn5EooKX6BuUr88lBRoEVfJIL5N
WR8o0T4OwmBr6bAQEqLnzZbq1dXP74DLF7uIHEouGZ1P/dwY5k7OlPz5nTKRQQ==
ARC-Seal: i=1; s=dkim; d=freebsd.org; t=1597724294; a=rsa-sha256; cv=none;
b=W/jsao8J67LXU/FTI87Tn26h5mlQTgpPdB3Sjdsa/LSfmSsCF+HfXM48/9SDkzJQLpxT9G
aVk6+ApFln2Tte/8w+5rwdoq2gmVKlIsNlRXR3UyPlIgLwW92rPjrAmP89rgQska+NYY9l
qbSWJJXQXQqVlBaTmR8zcg6eJE7QSorVU3TgnpF43hsry6FqqBL28EHMMGh68dZEBly5Zw
k9ZAoUANO85YntipkBbJBd7lyUibcLvGtdE8qWtBEpvN/pt1Zua3mAtzDa/rL7PvZ18knR
g5I8391iMM7lSyZmVztmUcMOAHZPowjQ8lbSpSvfvykkZ95dzK55aBA1/tlFKQ==
ARC-Authentication-Results: i=1; mx1.freebsd.org;
dkim=pass header.d=gmail.com header.s=20161025 header.b=G4eMDewr;
spf=pass (mx1.freebsd.org: domain of ganbold@gmail.com designates
2607:f8b0:4864:20::32f as permitted sender) smtp.mailfrom=ganbold@gmail.com
X-Rspamd-Queue-Id: 4BVyM94xmkz4gmx
X-Spamd-Bar: ---
Authentication-Results: mx1.freebsd.org;
dkim=pass header.d=gmail.com header.s=20161025 header.b=G4eMDewr;
dmarc=pass (policy=none) header.from=gmail.com;
spf=pass (mx1.freebsd.org: domain of ganbold@gmail.com designates
2607:f8b0:4864:20::32f as permitted sender) smtp.mailfrom=ganbold@gmail.com
X-Spamd-Result: default: False [-3.34 / 15.00]; ARC_NA(0.00)[];
NEURAL_HAM_MEDIUM(-0.97)[-0.974];
R_DKIM_ALLOW(-0.20)[gmail.com:s=20161025]; FROM_HAS_DN(0.00)[];
FREEMAIL_FROM(0.00)[gmail.com];
R_SPF_ALLOW(-0.20)[+ip6:2607:f8b0:4000::/36];
MIME_GOOD(-0.10)[multipart/alternative,text/plain];
PREVIOUSLY_DELIVERED(0.00)[freebsd-arm@freebsd.org];
ARC_SIGNED(0.00)[i=1]; NEURAL_HAM_LONG(-1.00)[-0.997];
TO_MATCH_ENVRCPT_SOME(0.00)[]; TO_DN_ALL(0.00)[];
DKIM_TRACE(0.00)[gmail.com:+]; MIME_BASE64_TEXT(0.10)[];
RCPT_COUNT_TWO(0.00)[2];
RCVD_IN_DNSWL_NONE(0.00)[2607:f8b0:4864:20::32f:from];
DMARC_POLICY_ALLOW(-0.50)[gmail.com,none];
NEURAL_HAM_SHORT(-0.47)[-0.474]; FROM_EQ_ENVFROM(0.00)[];
MIME_TRACE(0.00)[0:+,1:+,2:~];
FREEMAIL_ENVFROM(0.00)[gmail.com];
ASN(0.00)[asn:15169, ipnet:2607:f8b0::/32, country:US];
RCVD_COUNT_TWO(0.00)[2]; RCVD_TLS_ALL(0.00)[];
DWL_DNSWL_NONE(0.00)[gmail.com:dkim]
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
X-Content-Filtered-By: Mailman/MimeDel 2.1.33
X-BeenThere: freebsd-arm@freebsd.org
X-Mailman-Version: 2.1.33
Precedence: list
List-Id: "Porting FreeBSD to ARM processors." <freebsd-arm.freebsd.org>
List-Unsubscribe: <https://lists.freebsd.org/mailman/options/freebsd-arm>,
<mailto:freebsd-arm-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-arm/>;
List-Post: <mailto:freebsd-arm@freebsd.org>
List-Help: <mailto:freebsd-arm-request@freebsd.org?subject=help>
List-Subscribe: <https://lists.freebsd.org/mailman/listinfo/freebsd-arm>,
<mailto:freebsd-arm-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Tue, 18 Aug 2020 04:18:15 -0000
On Tue, Aug 18, 2020 at 11:01 AM Furkan Salman <furkan@fkardame.com> wrote:
> Hello,
>
>
>
> I received my NanoPi R1 and NanoPi R2s of which R2s doesn't work I guess
> so was only able to test R1 images from Mr. Ganbold links which are quite
> old.
>
>
>
> Here is the boot log which is getting stuck at mountpoint as it fails to
> mount opnsense partition with rw access.
>
>
>
> U-Boot SPL 2019.01 (Mar 19 2019 - 16:56:16 +0800)
>
> DRAM: 1024 MiB
>
> Trying to boot from MMC1
>
>
>
> U-Boot 2019.01 (Mar 19 2019 - 16:56:16 +0800) Allwinner Technology
>
>
> CPU: Allwinner H3 (SUN8I 1680)
>
> Model: FriendlyArm NanoPi M1 Plus
>
> DRAM: 1 GiB
>
> MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
>
> Loading Environment from FAT... *** Warning - bad CRC, using default
> environment
>
> In: serial
>
> Out: serial
>
> Err: serial
>
> Net: No ethernet found.
>
> starting USB...
>
> USB0: USB EHCI 1.00
>
> USB1: USB OHCI 1.0
>
> USB2: USB EHCI 1.00
>
> USB3: USB OHCI 1.0
>
> USB4: USB EHCI 1.00
>
> USB5: USB OHCI 1.0
>
> scanning bus 0 for devices... 2 USB Device(s) found
>
> scanning bus 2 for devices... 1 USB Device(s) found
>
> scanning bus 4 for devices... 1 USB Device(s) found
>
> scanning usb for storage devices... 0 Storage Device(s) found
>
> Hit any key to stop autoboot: 0
>
> switch to partitions #0, OK
>
> mmc0(part 0) is current device
>
> Scanning mmc 0:1...
>
> 26950 bytes read in 2 ms (12.9 MiB/s)
>
> Found EFI removable media binary efi/boot/bootarm.efi
>
> Scanning disks on usb...
>
> Disk usb0 not ready
>
> Disk usb1 not ready
>
> Disk usb2 not ready
>
> Disk usb3 not ready
>
> Scanning disks on mmc...
>
> - ______ ____ _____ _____
> | ____| | _ \ / ____| __ \
> | |___ _ __ ___ ___ | |_) | (___ | | | |
> | ___| '__/ _ \/ _ \| _ < \___ \| | | |
> | | | | | __/ __/| |_) |____) | |__| |
> | | | | | | || | | |
> |_| |_| \___|\___||____/|_____/|_____/
> ```
> `
> =EF=BF=BD=EF=BF=BD=E2=95=90=EF=BF=BD=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=
=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=
=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=
=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=
=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=
=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=
=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=
=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=
=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=EF=BF=
=BD-/
> =E2=95=90
> =EF=BF=BD=E2=95=91 =EF=BF=BD=E2=
=95=91 +o .--` /y:`
> +.
> =EF=BF=BD=E2=95=91 1. Boot Multi user [Enter] =EF=BF=BD=E2=
=95=91 yo`:. :o
> `+-
> =EF=BF=BD=E2=95=91 2. Boot Single user =EF=BF=BD=E2=
=95=91 y/ -/`
> -o/
> =EF=BF=BD=E2=95=91 3. Escape to loader prompt =EF=BF=BD=E2=
=95=91 .-
> ::/sy+:.
> =EF=BF=BD=E2=95=91 4. Reboot =EF=BF=BD=E2=
=95=91 /
> `-- /
> =EF=BF=BD=E2=95=91 =EF=BF=BD=E2=
=95=91 `:
> :`
> =EF=BF=BD=EF=BF=BD=E2=95=91Options: =EF=BF=
=BD=E2=95=91 `:
> :`
> =EF=BF=BD=E2=95=91 5. Kernel: default/kernel (1 of 1) =EF=BF=BD=E2=
=95=91 /
> /
> =EF=BF=BD=E2=95=91 6. Boot Options =EF=BF=BD=E2=
=95=91 .-
> -.
> =EF=BF=BD=E2=95=91 =EF=BF=BD=E2=
=95=91 --
> -.
> =EF=BF=BD=E2=95=91 =EF=BF=BD=E2=
=95=91 `:` `:`
> =EF=BF=BD=E2=95=91 =EF=BF=BD=E2=
=95=91 .-- `--.
> =EF=BF=BD=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=
=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=
=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=
=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=EF=BF=BD=E2=95=90=EF=BF=BD=
=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=
=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=EF=BF=BD=E2=95=90=EF=BF=BD=EF=BF=BD=E2=95=
=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=
=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=
=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=BD=E2=95=90=EF=BF=
=BD=EF=BF=BD
> =E2=95=90
> Autoboot in 3 seconds, hit [Enter] to boot or any other key to stop
>
> Autoboot in 2 seconds, hit [Enter] to boot or any other key to stop
>
> Loading kernel...
>
> /boot/kernel/kernel text=3D0x853bb0 data=3D0xb5cc8+0x25d778
> syms=3D[0x4+0xa8e50+0x4+0x10cbbc]
> Loading configured modules...
>
> /boot/kernel/if_lagg.ko text=3D0x3f20 text=3D0x7a00 data=3D0x1088+0xf7c
> syms=3D[0x4+0x23e0+0x4+0x1535]
> /boot/kernel/ng_pppoe.ko text=3D0x1b20 text=3D0x3f20 data=3D0x1088
> syms=3D[0x4+0xf70+0x4+0x8b9]
> loading required module 'netgraph'
>
> /boot/kernel/netgraph.ko text=3D0x3f54 text=3D0x8f40 data=3D0x1088+0xfec
> syms=3D[0x4+0x2550+0x4+0x1de8]
> /boot/kernel/ng_ppp.ko text=3D0x1df0 text=3D0x4350 data=3D0x1088
> syms=3D[0x4+0xff0+0x4+0xa59]
> /boot/kernel/pflog.ko text=3D0xb33 text=3D0x820 data=3D0x1088
> syms=3D[0x4+0x9e0+0x4+0x748]
> loading required module 'pf'
>
> /boot/kernel/pf.ko text=3D0x8108 text=3D0x30c30 data=3D0x3088+0x1074
> syms=3D[0x4+0x5bf0+0x4+0x3608]
> /boot/kernel/ng_tcpmss.ko text=3D0xa38 text=3D0x6a0 data=3D0x1088
> syms=3D[0x4+0x690+0x4+0x48c]
> /boot/kernel/ng_bpf.ko text=3D0x1580 text=3D0x1320 data=3D0x1088
> syms=3D[0x4+0x9c0+0x4+0x6c8]
> /boot/kernel/ng_eiface.ko text=3D0x13e0 text=3D0x1200 data=3D0x1088
> syms=3D[0x4+0xf10+0x4+0x964]
> /boot/kernel/ng_ksocket.ko text=3D0x1974 text=3D0x1d10 data=3D0x1088
> syms=3D[0x4+0x1020+0x4+0x9c7]
> /boot/kernel/if_gif.ko text=3D0x1e64 text=3D0x3d60 data=3D0x1088+0xfa4
> syms=3D[0x4+0x1b70+0x4+0xff9]
> /boot/kernel/if_enc.ko text=3D0xf64 text=3D0x9b0 data=3D0x1088
> syms=3D[0x4+0xba0+0x4+0xbca]
> /boot/kernel/ng_tty.ko text=3D0xe1d text=3D0xf50 data=3D0x1088
> syms=3D[0x4+0xb60+0x4+0x58c]
> /boot/kernel/ng_tee.ko text=3D0xa98 text=3D0x7c0 data=3D0x1088
> syms=3D[0x4+0x760+0x4+0x46c]
> /boot/kernel/ng_car.ko text=3D0xe60 text=3D0x1110 data=3D0x1088
> syms=3D[0x4+0x970+0x4+0x59d]
> /boot/kernel/ng_pred1.ko text=3D0xf64 text=3D0xe40 data=3D0x1088
> syms=3D[0x4+0x8f0+0x4+0x5e1]
> /boot/kernel/ng_rfc1490.ko text=3D0xa4c text=3D0xbf0 data=3D0x1088
> syms=3D[0x4+0x810+0x4+0x486]
> /boot/kernel/ng_socket.ko text=3D0x178f text=3D0x1730 data=3D0x1088+0xf90
> syms=3D[0x4+0x12c0+0x4+0xe42]
> /boot/kernel/ng_pptpgre.ko text=3D0x1c98 text=3D0x2380 data=3D0x1088
> syms=3D[0x4+0xdc0+0x4+0x8d0]
> /boot/kernel/ng_deflate.ko text=3D0x1008 text=3D0xe90 data=3D0x1088
> syms=3D[0x4+0xb10+0x4+0x71f]
> /boot/kernel/ng_iface.ko text=3D0x177c text=3D0x10a0 data=3D0x1088
> syms=3D[0x4+0xfa0+0x4+0xae6]
> /boot/entropy size=3D0x1000
>
> /boot/kernel/ng_ether.ko text=3D0x1554 text=3D0x1350 data=3D0x1088+0xf7c
> syms=3D[0x4+0xeb0+0x4+0x94b]
> /boot/kernel/ng_mppc.ko text=3D0xf70 text=3D0x2cc0 data=3D0x1088+0xf7c
> syms=3D[0x4+0xc10+0x4+0x8c1]
> loading required module 'rc4'
>
> /boot/kernel/rc4.ko text=3D0x3d7 text=3D0xf8 data=3D0x1068
> syms=3D[0x4+0x2a0+0x4+0x229]
> /boot/kernel/ng_pipe.ko text=3D0x14d4 text=3D0x1e40 data=3D0x1088+0xf90
> syms=3D[0x4+0xc30+0x4+0x766]
> /boot/kernel/ng_one2many.ko text=3D0xe4c text=3D0xbc0 data=3D0x1088
> syms=3D[0x4+0x950+0x4+0x608]
> /boot/kernel/ng_echo.ko text=3D0x57d text=3D0x160 data=3D0x1088
> syms=3D[0x4+0x430+0x4+0x302]
> /boot/kernel/if_tap.ko text=3D0x1d38 text=3D0x2490 data=3D0x1088+0xfac
> syms=3D[0x4+0x15c0+0x4+0xb08]
> /boot/kernel/ng_lmi.ko text=3D0x111f text=3D0x16e0 data=3D0x1088
> syms=3D[0x4+0x900+0x4+0x48f]
> /boot/kernel/ng_l2tp.ko text=3D0x21b8 text=3D0x2990 data=3D0x1088
> syms=3D[0x4+0xde0+0x4+0x8ce]
> /boot/kernel/ng_vlan.ko text=3D0xe90 text=3D0xd20 data=3D0x1088
> syms=3D[0x4+0x8b0+0x4+0x55b]
> /boot/kernel/if_ure.ko text=3D0x1a20 text=3D0x50f0 data=3D0x1088+0xf80
> syms=3D[0x4+0x13d0+0x4+0xd26]
> /boot/kernel/ng_frame_relay.ko text=3D0x857 text=3D0x8d0 data=3D0x1088
> syms=3D[0x4+0x740+0x4+0x3f2]
> /boot/kernel/ng_hole.ko text=3D0x850 text=3D0x350 data=3D0x1088
> syms=3D[0x4+0x5d0+0x4+0x3db]
> /boot/kernel/if_bridge.ko text=3D0x2cc0 text=3D0x6580 data=3D0x1088+0xf7c
> syms=3D[0x4+0x2220+0x4+0x16a5]
> loading required module 'bridgestp'
>
> /boot/kernel/bridgestp.ko text=3D0x1138 text=3D0x4550 data=3D0x1088+0xf90
> syms=3D[0x4+0xf20+0x4+0x870]
> /boot/kernel/ng_async.ko text=3D0x10d0 text=3D0xe80 data=3D0x1088
> syms=3D[0x4+0x9d0+0x4+0x64c]
> /boot/kernel/pfsync.ko text=3D0x2cb4 text=3D0x7b70 data=3D0x1088+0xf7c
> syms=3D[0x4+0x1cb0+0x4+0x12b3]
> /boot/kernel/carp.ko text=3D0x2dac text=3D0x6110 data=3D0x1088+0xfa4
> syms=3D[0x4+0x1e40+0x4+0x1333]
> /boot/kernel/ng_bridge.ko text=3D0x15dc text=3D0x1550 data=3D0x1088+0xf98
> syms=3D[0x4+0xb80+0x4+0x7f5]
> /boot/kernel/if_tun.ko text=3D0x235e text=3D0x2960 data=3D0x1088+0xf9c
> syms=3D[0x4+0x1aa0+0x4+0xdf1]
> /boot/kernel/ng_UI.ko text=3D0x78f text=3D0x4a0 data=3D0x1088
> syms=3D[0x4+0x690+0x4+0x396]
> /boot/kernel/ng_cisco.ko text=3D0xee4 text=3D0xfe0 data=3D0x1088
> syms=3D[0x4+0xa30+0x4+0x5ad]
> /boot/kernel/if_gre.ko text=3D0x1e4c text=3D0x3790 data=3D0x1088+0xf9c
> syms=3D[0x4+0x19c0+0x4+0xf24]
> /boot/kernel/ng_vjc.ko text=3D0x1154 text=3D0x1910 data=3D0x1088
> syms=3D[0x4+0x9d0+0x4+0x61b]
> Using DTB provided by EFI at 0x47ef6000.
>
> Loading DTB overlays: 'sun8i-h3-sid.dtbo,sun8i-h3-ths.dtbo'
>
> /boot/dtb/overlays/sun8i-h3-sid.dtbo size=3D0x210
>
> /boot/dtb/overlays/sun8i-h3-ths.dtbo size=3D0x3ba
>
> Kernel entry at 0x71000180...
>
> Kernel args: (null)
>
> applying DTB overlay '/boot/dtb/overlays/sun8i-h3-sid.dtbo'
>
> applying DTB overlay '/boot/dtb/overlays/sun8i-h3-ths.dtbo'
>
> EHCI failed to shut down host controller.
>
> EHCI failed to shut down host controller.
>
> EHCI failed to shut down host controller.
>
> ---<<BOOT>>---
>
> KDB: debugger backends: ddb
>
> KDB: current backend: ddb
>
> Copyright (c) 1992-2019 The FreeBSD Project.
>
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>
> The Regents of the University of California. All rights reserved.
>
> FreeBSD is a registered trademark of The FreeBSD Foundation.
>
> FreeBSD 13.0-CURRENT #37 r345944M: Tue Apr 23 18:10:40 +08 2019
>
> tsgan@beastie:/usr/obj/usr/src/arm.armv7/sys/GENERIC arm
>
> FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLV=
M
> 8.0.0)
> WARNING: WITNESS option enabled, expect reduced performance.
>
> VT: init without driver.
>
> module_register: cannot register ofwbus/pcib from kernel; already loaded
> from kernel
> Module ofwbus/pcib failed to register: 17
>
> module_register: cannot register simplebus/pcib from kernel; already
> loaded from kernel
> Module simplebus/pcib failed to register: 17
>
> CPU: ARM Cortex-A7 r0p5 (ECO: 0x00000000)
>
> CPU Features:
>
> Multiprocessing, Thumb2, Security, Virtualization, Generic Timer,
> VMSAv7,
> PXN, LPAE, Coherent Walk
>
> Optional instructions:
>
> SDIV/UDIV, UMULL, SMULL, SIMD(ext)
>
> LoUU:2 LoC:3 LoUIS:2
>
> Cache level 1:
>
> 32KB/64B 4-way data cache WB Read-Alloc Write-Alloc
>
> 32KB/32B 2-way instruction cache Read-Alloc
>
> Cache level 2:
>
> 512KB/64B 8-way unified cache WB Read-Alloc Write-Alloc
>
> real memory =3D 1039556608 (991 MB)
>
> avail memory =3D 997736448 (951 MB)
>
> No PSCI/SMCCC call function found
>
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>
> random: unblocking device.
>
> random: entropy device external interface
>
> kbd0 at kbdmux0
>
> ofwbus0: <Open Firmware Device Tree>
>
> aw_ccu0: <Allwinner Clock Control Unit> on ofwbus0
>
> clk_fixed0: <Fixed clock> on aw_ccu0
>
> clk_fixed1: <Fixed clock> on aw_ccu0
>
> clk_fixed2: <Fixed clock> on aw_ccu0
>
> simplebus0: <Flattened device tree simple bus> on ofwbus0
>
> ccu_h3ng0: <Allwinner H3/H5 Clock Control Unit NG> mem 0x1c20000-0x1c203f=
f
> on simplebus0
> regfix0: <Fixed Regulator> on ofwbus0
>
> regfix1: <Fixed Regulator> on ofwbus0
>
> regfix2: <Fixed Regulator> on ofwbus0
>
> regfix3: <Fixed Regulator> on ofwbus0
>
> ccu_sun8i_r0: <Allwinner SUN8I_R Clock Control Unit NG> mem
> 0x1f01400-0x1f014ff on simplebus0
> aw_sid0: <Allwinner Secure ID Controller> mem 0x1c14000-0x1c143ff on
> simplebus0
> gic0: <ARM Generic Interrupt Controller> mem
> 0x1c81000-0x1c81fff,0x1c82000-0x1c83fff,0x1c84000-0x1c85fff,0x10
> gic0: pn 0x1, arch 0x2, rev 0x1, implementer 0x43b irqs 160
>
> gpio0: <Allwinner GPIO/Pinmux controller> mem 0x1c20800-0x1c20bff irq
> 19,20 on simplebus0
> gpiobus0: <OFW GPIO bus> on gpio0
>
> gpio1: <Allwinner GPIO/Pinmux controller> mem 0x1f02c00-0x1f02fff irq 44
> on simplebus0
> gpiobus1: <OFW GPIO bus> on gpio1
>
> rtc0: <Allwinner RTC> mem 0x1f00000-0x1f00053 irq 40,41 on simplebus0
>
> rtc0: registered as a time-of-day clock, resolution 1.000000s
>
> generic_timer0: <ARMv7 Generic Timer> irq 0,1,2,3 on ofwbus0
>
> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
>
> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
>
> aw_syscon0: <Allwinner syscon> mem 0x1c00000-0x1c00fff on simplebus0
>
> awusbphy0: <Allwinner USB PHY> mem
> 0x1c19400-0x1c1942b,0x1c1a800-0x1c1a803,0x1c1b800-0x1c1b803,0x1c1c800-0x1=
0
> aw_thermal0: <Allwinner Thermal Sensor Controller> mem 0x1c25000-0x1c250f=
f
> irq 4 on simplebus0
> a31dmac0: <Allwinner DMA controller> mem 0x1c02000-0x1c02fff irq 5 on
> simplebus0
> aw_mmc0: <Allwinner Integrated MMC/SD controller> mem 0x1c0f000-0x1c0ffff
> irq 7 on simplebus0
> mmc0: <MMC/SD bus> on aw_mmc0
>
> aw_mmc1: <Allwinner Integrated MMC/SD controller> mem 0x1c10000-0x1c10fff
> irq 8 on simplebus0
> mmc1: <MMC/SD bus> on aw_mmc1
>
> aw_mmc2: <Allwinner Integrated MMC/SD controller> mem 0x1c11000-0x1c11fff
> irq 9 on simplebus0
> mmc2: <MMC/SD bus> on aw_mmc2
>
> ehci0: <Allwinner Integrated USB 2.0 controller> mem 0x1c1b000-0x1c1b0ff
> irq 13 on simplebus0
> usbus0: EHCI version 1.0
>
> usbus0 on ehci0
>
> ohci0: <Generic OHCI Controller> mem 0x1c1b400-0x1c1b4ff irq 14 on
> simplebus0
> usbus1 on ohci0
>
> ehci1: <Allwinner Integrated USB 2.0 controller> mem 0x1c1c000-0x1c1c0ff
> irq 15 on simplebus0
> usbus2: EHCI version 1.0
>
> usbus2 on ehci1
>
> ohci1: <Generic OHCI Controller> mem 0x1c1c400-0x1c1c4ff irq 16 on
> simplebus0
> usbus3 on ohci1
>
> ehci2: <Allwinner Integrated USB 2.0 controller> mem 0x1c1d000-0x1c1d0ff
> irq 17 on simplebus0
> usbus4: EHCI version 1.0
>
> usbus4 on ehci2
>
> ohci2: <Generic OHCI Controller> mem 0x1c1d400-0x1c1d4ff irq 18 on
> simplebus0
> usbus5 on ohci2
>
> gpioc0: <GPIO controller> on gpio0
>
> awg0: <Allwinner Gigabit Ethernet> mem 0x1c30000-0x1c3ffff irq 23 on
> simplebus0
> miibus0: <MII bus> on awg0
>
> rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on
> miibus0
> rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
> 100baseTX-FDX, 100baseTX-FDX-flow, 1000baw
> rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 7 on
> miibus0
> rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
> 100baseTX-FDX, 100baseTX-FDX-flow, 1000baw
> awg0: Ethernet address: 02:02:53:04:22:5c
>
> aw_wdog0: <Allwinner A31 Watchdog> mem 0x1c20ca0-0x1c20cbf irq 26 on
> simplebus0
> uart0: console (115384,n,8,1)mem 0x1c28000-0x1c283ff irq 31 on simplebus0
>
> uart1: <16750 or compatible> mem 0x1c28c00-0x1c28fff irq 34 on simplebus0
>
> aw_ir0: <Allwinner CIR controller> mem 0x1f02000-0x1f023ff irq 42 on
> simplebus0
> aw_ir0: hwreset_get_by_ofw_idx =3D 0
>
> gpioc1: <GPIO controller> on gpio1
>
> cpulist0: <Open Firmware CPU Group> on ofwbus0
>
> cpu0: <Open Firmware CPU> on cpulist0
>
> cpu1: <Open Firmware CPU> on cpulist0
>
> cpu2: <Open Firmware CPU> on cpulist0
>
> cpu3: <Open Firmware CPU> on cpulist0
>
> gpioled0: <GPIO LEDs> on ofwbus0
>
> cryptosoft0: <software crypto>
>
> Timecounters tick every 1.000 msec
>
> usbus0: 480Mbps High Speed USB v2.0
>
> usbus1: 12Mbps Full Speed USB v1.0
>
> usbus2: 480Mbps High Speed USB v2.0
>
> usbus3: 12Mbps Full Speed USB v1.0
>
> usbus4: 480Mbps High Speed USB v2.0
>
> ugen1.1: <Generic OHCI root HUB> at usbus1
>
> uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
> usbus1
> ugen2.1: <Allwinner EHCI root HUB> at usbus2
>
> uhub1: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
> usbus2
> ugen3.1: <Generic OHCI root HUB> at usbus3
>
> uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
> usbus3
> ugen4.1: <Allwinner EHCI root HUB> at usbus4
>
> uhub3: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
> usbus4
> ugen0.1: <Allwinner EHCI root HUB> at usbus0
>
> uhub4: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
> usbus0
> usbus5: 12Mbps Full Speed USB v1.0
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> ugen5.1: <Generic OHCI root HUB> at usbus5
>
> uhub5: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
> usbus5
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_ERR AW_MMC_INT_RESP_CRC_ERR
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> mmc0: CMD3 failed, RESULT: 1
>
> mmc0: Error setting RCA 1
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> mmc1: No compatible cards found on bus
>
> aw_mmc1: Spurious interrupt - no active request, rint: 0x00000004
>
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> uhub0: 1 port with 1 removable, self powered
>
> uhub2: 1 port with 1 removable, self powered
>
> AW_MMC_INT_DATA_END_BIT_ERR
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> AW_MMC_INT_RESP_TIMEOUT
>
> mmcsd0: 8GB <MMCHC 8GTF4R 0.6 SN 979C5F19 MFG 02/2020 by 21 0x0000> at
> mmc2 52.0MHz/8bit/32768-block
> mmcsd0boot0: 4MB partion 1 at mmcsd0
>
> mmcsd0boot1: 4MB partion 2 at mmcsd0
>
> mmcsd0rpmb: 524kB partion 3 at mmcsd0
>
> Release APs
>
> WARNING: WITNESS option enabled, expect reduced performance.
>
> uhub5: 1 port with 1 removable, self powered
>
> Trying to mount root from ufs:/dev/ufs/OPNsense [rw]...
>
> Root mount waiting for: usbus4 usbus2 usbus0
>
> uhub3: 1 port with 1 removable, self powered
>
> uhub1: 1 port with 1 removable, self powered
>
> uhub4: 1 port with 1 removable, self powered
>
> ugen0.2: <Realtek USB 10/100 LAN> at usbus0
>
> ure0 on uhub4
>
> ure0: <Realtek USB 10/100 LAN, class 0/0, rev 2.10/20.00, addr 2> on
> usbus0
> mountroot: waiting for device /dev/ufs/OPNsense...
>
> ure0: MAC assigned randomly
>
> miibus1: <MII bus> on ure0
>
> rlphy0: <RTL8201E 10/100 media interface> PHY 0 on miibus1
>
> rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>
> ue0: <USB Ethernet> on ure0
>
> ue0: Ethernet address: aa:45:b5:64:b1:70
>
> Mounting from ufs:/dev/ufs/OPNsense failed with error 19.
>
>
> Loader variables:
>
> vfs.root.mountfrom=3Dufs:/dev/ufs/OPNsense
>
> vfs.root.mountfrom.options=3Drw
>
>
> Manual root filesystem specification:
>
> <fstype>:<device> [options]
>
> Mount <device> using filesystem <fstype>
>
> and with the specified (optional) option list.
>
>
> eg. ufs:/dev/da0s1a
>
> zfs:zroot/ROOT/default
>
> cd9660:/dev/cd0 ro
>
> (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
>
>
> ? List valid disk boot devices
>
What does it show if you type ? in mountroot prompt?
thanks,
Ganbold
>
> . Yield 1 second (for background tasks)
>
> <empty line> Abort manual input
>
>
> mountroot> ls
>
> Invalid file system specification.
>
>
> mountroot>
>
>
>
> From the above logs I see that both the ethernet cards were detected.
>
> I then tried the FreeBSD image from the same link and it have the same
> issue.
>
> Link: https://people.freebsd.org/~ganbold/
>
>
> Is anyone else working on armv7 NanoPi R1?
> _______________________________________________
> freebsd-arm@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?173ff8383c3.114ced33f588171.4981943076988851854>