Date: Tue, 16 Jul 1996 11:53:40 -0700 From: "Justin T. Gibbs" <gibbs@freefall.freebsd.org> To: conta@alpo.casc.com (Alex Conta) Cc: freebsd-scsi@freebsd.org, freebsd-hardware@freebsd.org Subject: Re: Adaptec 2940 PCI-SCSI on Compaq ProLinea 5100 Message-ID: <199607161853.LAA22911@freefall.freebsd.org> In-Reply-To: Your message of "Tue, 16 Jul 1996 14:20:34 EDT." <9607161820.AA12434@centime.cascade>
next in thread | previous in thread | raw e-mail | index | archive | help
> >SCSI hardware/freebsd problem: > >1. > >I have an Adaptec 2940 PCI-SCSI-2 adapter that works just fine under FreeBSD >2.1 on a DEC Starion 960 PC (SCSI-2 hard disk drive + cd-rom). > >The same adapter works fine on a Compaq ProLinea 5100 (SCSI hard disk and >cd-rom) under Windows 3.1, but it does not work when I try to install FreeBSD >from a CD-ROM distribution. > >The installation fails because the adapter is not recognized. Booting with >"-c" and setting manually the IRQ, Port Address, and other parameters didn't >help. The 2940 shouldn't show up in Userconfig anymore. It is not an ISA device. >Known problem? Known solution? This is the first I've heard of this kind of problem. Perhaps our PCI code is having problems with this board. >Alex > -- Justin T. Gibbs =========================================== FreeBSD: Turning PCs into workstations ===========================================
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199607161853.LAA22911>