Date: Tue, 10 Oct 2006 13:17:37 -0500 From: kreios@gmail.com To: "Matthew Jacob" <lydianconcepts@gmail.com> Cc: stable@freebsd.org Subject: Re: Re: Qlogic 2340 problems Message-ID: <2de4f2a00610101117o3e9e523by2338f6532ef9172c@mail.gmail.com> In-Reply-To: <7579f7fb0610100750p456e06a4xaa66d92ef97f16f7@mail.gmail.com> References: <2de4f2a00610091524o49c7248fp78387d71dcd43f28@mail.gmail.com> <7579f7fb0610100750p456e06a4xaa66d92ef97f16f7@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 10/10/06, Matthew Jacob <lydianconcepts@gmail.com> wrote: > That's an odd one. It means that the DMA of the ICB failed. > > Three questions: > > a) Tell me more about this system Supermicro PDSMi Motherboard, 1G of RAM, Pentium D 3.4GHz CPU, 80G SATA hard drive in a 1U chassis. http://www.supermicro.com/products/system/1U/5015/SYS-5015M-MR.cfm > b) Is this still a problem for the latest RELENG_6 branch changes? Have not tried yet. I am compiling it now and will give it a go. I have another system that has the same card running 6.1 release that is working. I am going to take it down tonight and look for differences. > c) Can you try a test kernel? Yes. The system is new and I have only loaded the OS and just started testing to make sure all hardware worked before fully configuring the box. I have remote serial console, remote KVM, and remote power to the box so its a good box to play on. > > On 10/9/06, kreios@gmail.com <kreios@gmail.com> wrote: > > I having problems getting this card to attach in FreeBSD 6.1. dmesg > > shows the following: > > > > Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.10 > > isp0: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x4000-0x40ff mem > > 0xed200000-0xed200fff irq 24 at device 1.0 on pci3 > > isp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xed200000 > > isp0: using Memory space register mapping > > ioapic1: routing intpin 0 (PCI IRQ 24) to vector 49 > > isp0: [GIANT-LOCKED] > > isp0: Board Type 2312, Chip Revision 0x2, loaded F/W Revision 3.3.6 > > isp0: 839 max I/O commands supported > > isp0: NVRAM Port WWN 0x210000e08b8fa3b0 > > isp0: Mailbox Command 'INIT FIRMWARE' failed (HOST INTERFACE ERROR) > > > > BIOS has been enabled in the card and the module ispfw has been > > loaded. Card works in Windows XP. Not sure what to try next. Card > > is hooked to a Brocade Silkworm 300 switch. Disks I am trying to see > > are on an Apple Xserve RAID box. > > > > Thanks for you time, > > Dave Dave
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2de4f2a00610101117o3e9e523by2338f6532ef9172c>