Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 5 Jan 1999 16:38:13 +0100
From:      Boris Staeblow <balu@dva.in-berlin.de>
To:        freebsd-isdn@FreeBSD.ORG
Subject:   HELP: crash with I4B
Message-ID:  <19990105163813.A29188@dva.in-berlin.de>

next in thread | raw e-mail | index | archive | help
Hello,

_sometimes_ when i dialout to my provider i get the following
messages:

Jan  5 16:01:24  rate 90 sec/unit (aocd, rate)
Jan  5 16:01:24  dialing out from xxx to xxx
Jan  5 16:01:24  outgoing call proceeding (ctl 0, ch 0)
Jan  5 16:01:25  outgoing call active (ctl 0, ch 0)
Jan  5 16:01:25  outgoing call disconnected (remote)
Jan  5 16:01:25  cause 101: Message not compatible with call state (Q.850)
Jan  5 16:01:25  charging: 1 units, 0 seconds
Jan  5 16:01:25  accounting: in 56, out 70 (in 0, out 0)
Jan  5 16:01:25 dva /kernel: i4b-L3-i4b_decode_q931: cannot find calldescriptor 
for cr = 0x6e, crflag = 0x1, msg = 0x4d, frame =  0x4d 0x8 0x2 0x82 0xd1
Jan  5 16:01:29 dva /kernel: i4b-L3-i4b_decode_q931: cannot find calldescriptor 
for cr = 0x6e, crflag = 0x1, msg = 0x4d, frame =  0x4d 0x8 0x2 0x82 0xd1

At further attemts to dial-out (same log-messages like above)
the machine will mostly crash and reset immediately without viewable panic's. 

Is this a known problem?
Do you need log's with higher debuglevels?

The remote ISDN-Router is an Ascend MAX 2000.

My Setup:
-current with i4b 0.70

isic0 at 0xd80 irq 11 maddr 0xd0000 msize 4096 flags 0x2 on isa
isic0: Teles S0/16, Creatix ISDN S0-16 or Niccy 1016
                    ^^^^^^^^^^^^^^^^^^
isic0: ISAC 2085 Version V2.3 (B3) (IOM-1) (Addr=0xf00d0100)
isic0: HSCX 82525 or 21525 Version 2.1 (AddrA=0xf00d0180, AddrB=0xf00d01c0)



Boris

-- 
balu@dva.in-berlin.de
   Boris Staeblow

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990105163813.A29188>