Date: Thu, 4 Jul 2002 09:45:07 -0700 (PDT) From: Oliver Eikemeier <eikemeier@fillmore-labs.com> To: freebsd-gnats-submit@FreeBSD.org Subject: misc/40192: PCI devices can not used with an nVidia nForce chipset Message-ID: <200207041645.g64Gj7jv010335@www.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 40192
>Category: misc
>Synopsis: PCI devices can not used with an nVidia nForce chipset
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Jul 04 09:50:01 PDT 2002
>Closed-Date:
>Last-Modified:
>Originator: Oliver Eikemeier
>Release: FreeBSD 4.6-RELEASE i386
>Organization:
Fillmore Labs
>Environment:
System: FreeBSD nuuk.fillmore-labs.com 4.6-RELEASE FreeBSD 4.6-RELEASE #0: Tue Jun 11 06:14:12 GMT 2002 murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC i386
Motherboard: ASUS A7N266-E (nVidia nForce 420D chipset, RealTek 8139 on board)
HD: Diamond Max Plus 80.0GB 6L080J4
PCI: 4xIntel PILA 8460C3 NIC (Intel Pro 100S)
pciconf -l -v:
chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x01a410de rev=0xb2 hdr=0x00
vendor = 'Nvidia Corporation'
device = 'nForce AGP Controller'
class = bridge
subclass = HOST-PCI
none0@pci0:0:1: class=0x050000 card=0x0c1110de chip=0x01ac10de rev=0xb2 hdr=0x00
vendor = 'Nvidia Corporation'
device = 'nForce 220/420 Memory Controller'
class = memory
subclass = RAM
none1@pci0:0:2: class=0x050000 card=0x0c1110de chip=0x01ad10de rev=0xb2 hdr=0x00
vendor = 'Nvidia Corporation'
device = 'nForce 220/420 Memory Controller'
class = memory
subclass = RAM
none2@pci0:0:3: class=0x050000 card=0x0c1110de chip=0x01ab10de rev=0xb2 hdr=0x00
vendor = 'Nvidia Corporation'
device = 'nForce 420 Memory Controller (DDR)'
class = memory
subclass = RAM
isab0@pci0:1:0: class=0x060100 card=0x0c1110de chip=0x01b210de rev=0xc3 hdr=0x00
vendor = 'Nvidia Corporation'
device = 'nForce HUB Interface'
class = bridge
subclass = PCI-ISA
none3@pci0:1:1: class=0x0c0500 card=0x0c1110de chip=0x01b410de rev=0xc1 hdr=0x00
vendor = 'Nvidia Corporation'
device = 'nForce SMBus Controller'
class = serial bus
subclass = SMBus
pcib1@pci0:8:0: class=0x060400 card=0x00000044 chip=0x01b810de rev=0xc2 hdr=0x01
vendor = 'Nvidia Corporation'
device = 'nForce PCI Bridge'
class = bridge
subclass = PCI-PCI
atapci0@pci0:9:0: class=0x01018a card=0x0c1110de chip=0x01bc10de rev=0xc3 hdr=0x00
vendor = 'Nvidia Corporation'
device = 'nForce ATA Controller'
class = mass storage
subclass = ATA
pcib2@pci0:30:0: class=0x060400 card=0x00000000 chip=0x01b710de rev=0xb2 hdr=0x01
vendor = 'Nvidia Corporation'
device = 'nForce AGP Host to PCI Bridge'
class = bridge
subclass = PCI-PCI
rl0@pci1:2:0: class=0x020000 card=0x805b1043 chip=0x813910ec rev=0x10 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RT8139 (A/B/C/8130) Fast Ethernet Adapter'
class = network
subclass = ethernet
fxp0@pci1:6:0: class=0x020000 card=0x00408086 chip=0x12298086 rev=0x0c hdr=0x00
vendor = 'Intel Corporation'
device = '82557/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
class = network
subclass = ethernet
fxp1@pci1:7:0: class=0x020000 card=0x00408086 chip=0x12298086 rev=0x0c hdr=0x00
vendor = 'Intel Corporation'
device = '82557/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
class = network
subclass = ethernet
fxp2@pci1:8:0: class=0x020000 card=0x00408086 chip=0x12298086 rev=0x0c hdr=0x00
vendor = 'Intel Corporation'
device = '82557/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
class = network
subclass = ethernet
fxp3@pci1:9:0: class=0x020000 card=0x00408086 chip=0x12298086 rev=0x0c hdr=0x00
vendor = 'Intel Corporation'
device = '82557/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
class = network
subclass = ethernet
none4@pci2:0:0: class=0x030000 card=0x0c1110de chip=0x01a010de rev=0xb1 hdr=0x00
vendor = 'Nvidia Corporation'
device = 'GeForce2 [Crush11] Integrated Graphics'
class = display
subclass = VGA
dmesg with 'set hw.ata.ata_dma=0' and 'boot -v':
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RELEASE #0: Tue Jun 11 06:14:12 GMT 2002
murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC
Calibrating clock(s) ... TSC clock: 1529325537 Hz, i8254 clock: 1193135 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: AMD Athlon(TM) XP 1800+ (1529.40-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 528400384 (516016K bytes)
Physical memory chunk(s):
0x00001000 - 0x0007ffff, 520192 bytes (127 pages)
0x004f7000 - 0x1f7e3fff, 523161600 bytes (127725 pages)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 509050880 (497120K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f21a0
bios32: Entry = 0xf1890 (c00f1890) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x1a90
pnpbios: Found PnP BIOS data at 0xc00fbf80
pnpbios: Entry = f0000:bfb0 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
ACPI: 000f7fe0
Preloaded elf kernel "kernel" at 0xc04d0000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04d00a8.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=01a410de)
Using $PIR table, 14 entries at 0xc00f2090
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x10de, dev=0x01a4, revid=0xb2
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base fc000000, size 25
found-> vendor=0x10de, dev=0x01ac, revid=0xb2
class=05-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x10de, dev=0x01ad, revid=0xb2
class=05-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x10de, dev=0x01ab, revid=0xb2
class=05-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x10de, dev=0x01b2, revid=0xc3
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x10de, dev=0x01b4, revid=0xc1
class=0c-05-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=3
map[10]: type 1, range 32, base 00005000, size 4
map[14]: type 1, range 32, base 00005500, size 4
map[18]: type 1, range 32, base 00005100, size 5
found-> vendor=0x10de, dev=0x01b8, revid=0xc2
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x10de, dev=0x01bc, revid=0xc3
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000a800, size 4
found-> vendor=0x10de, dev=0x01b7, revid=0xb2
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=2 secondarybus=2
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x10de, dev=0x01ac) at 0.1
pci0: <unknown card> (vendor=0x10de, dev=0x01ad) at 0.2
pci0: <unknown card> (vendor=0x10de, dev=0x01ab) at 0.3
isab0: <PCI to ISA bridge (vendor=10de device=01b2)> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <unknown card> (vendor=0x10de, dev=0x01b4) at 1.1 irq 3
pcib1: <PCI to PCI bridge (vendor=10de device=01b8)> at device 8.0 on pci0
found-> vendor=0x10ec, dev=0x8139, revid=0x10
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base 0000d800, size 8
map[14]: type 1, range 32, base ee000000, size 8
found-> vendor=0x8086, dev=0x1229, revid=0x0c
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=3
map[10]: type 1, range 32, base ed800000, size 12
map[14]: type 1, range 32, base 0000d400, size 6
map[18]: type 1, range 32, base ed000000, size 17
found-> vendor=0x8086, dev=0x1229, revid=0x0c
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=7
map[10]: type 1, range 32, base ec800000, size 12
map[14]: type 1, range 32, base 0000d000, size 6
map[18]: type 1, range 32, base ec000000, size 17
found-> vendor=0x8086, dev=0x1229, revid=0x0c
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base eb800000, size 12
map[14]: type 1, range 32, base 0000b800, size 6
map[18]: type 1, range 32, base eb000000, size 17
found-> vendor=0x8086, dev=0x1229, revid=0x0c
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=12
map[10]: type 1, range 32, base ea800000, size 12
map[14]: type 1, range 32, base 0000b400, size 6
map[18]: type 1, range 32, base ea000000, size 17
pci1: <PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0xd800-0xd8ff mem 0xee000000-0xee0000ff irq 5 at device 2.0 on pci1
rl0: Ethernet address: 00:e0:18:79:c8:e5
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: rl0 attached
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem 0xed000000-0xed01ffff,0xed800000-0xed800fff irq 3 at device 6.0 on pci1
fxp0: using memory space register mapping
fxp0: Ethernet address 00:02:b3:4c:0b:cd
fxp0: PCI IDs: 8086 1229 8086 0040 000c
fxp0: Dynamic Standby mode is disabled
inphy0: <i82555 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xd000-0xd03f mem 0xec000000-0xec01ffff,0xec800000-0xec800fff irq 7 at device 7.0 on pci1
fxp1: using memory space register mapping
fxp1: Ethernet address 00:02:b3:4c:0b:5b
fxp1: PCI IDs: 8086 1229 8086 0040 000c
fxp1: Dynamic Standby mode is disabled
inphy1: <i82555 10/100 media interface> on miibus2
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp1 attached
fxp2: <Intel Pro 10/100B/100+ Ethernet> port 0xb800-0xb83f mem 0xeb000000-0xeb01ffff,0xeb800000-0xeb800fff irq 5 at device 8.0 on pci1
fxp2: using memory space register mapping
using shared irq5.
fxp2: Ethernet address 00:02:b3:4c:0d:19
fxp2: PCI IDs: 8086 1229 8086 0040 000c
fxp2: Dynamic Standby mode is disabled
inphy2: <i82555 10/100 media interface> on miibus3
inphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp2 attached
fxp3: <Intel Pro 10/100B/100+ Ethernet> port 0xb400-0xb43f mem 0xea000000-0xea01ffff,0xea800000-0xea800fff irq 12 at device 9.0 on pci1
fxp3: using memory space register mapping
fxp3: Ethernet address 00:02:b3:4c:0b:78
fxp3: PCI IDs: 8086 1229 8086 0040 000c
fxp3: Dynamic Standby mode is disabled
inphy3: <i82555 10/100 media interface> on miibus4
inphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp3 attached
atapci0: <nVIDIA nForce ATA100 controller> port 0xa800-0xa80f at device 9.0 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xa800
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xa808
ata1: mask=03 ostat0=50 ostat2=7f
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 7f 7f
ata1: mask=03 stat0=10 stat1=7f
ata1-slave: ATA 25 7f
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
pcib2: <PCI to PCI bridge (vendor=10de device=01b7)> at device 30.0 on pci0
found-> vendor=0x10de, dev=0x01a0, revid=0xb1
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base e9000000, size 24
map[14]: type 1, range 32, base f0000000, size 27
pci2: <PCI bus> on pcib2
pci2: <NVidia model 01a0 graphics accelerator> (vendor=0x10de, dev=0x01a0) at 0.0 irq 11
ex_isa_identify()
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
adv0: not probed (disabled)
bt0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0067
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio0: irq maps: 0x2041 0x2051 0x2041 0x2041
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x2041 0x2041 0x2041 0x2041
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
using shared irq7.
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68c040, tty 630092, net 6710ba
bpf: sl0 attached
bpf: faith0 attached
ad0: success setting PIO4 on generic chip
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <MAXTOR 6L080J4/A93.0500> ATA-5 disk at ata0-master
ad0: 76345MB (156355584 sectors), 155114 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, PIO4
ad0: piomode=4 dmamode=2 udmamode=6 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <DVD-ROM DDU1621/VER S1.6> DVD-ROM drive at ata1 as master
acd0: 512KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium:
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 156344579, size 156344517 : OK
start_init: trying /sbin/init
>Description:
can boot the FreeBSD 4.6-RELEASE CD, but partitioning the hard disk fails (can not swap to /dev/ad0s1b, newfs fails).
Installing works when I boot with 'set hw.ata.ata_dma=0', but then the build-in ethernet card and the pci ethernet cards do not work - they are recognized, but I can not configure them.
Configuring the first installed ethernet card results in:
Jul 4 12:05:45 /kernel: fxp0: DMA timeout
Jul 4 12:05:46 last message repeated 7 times
Jul 4 12:06:02 /kernel: fxp0: command queue timeout
Jul 4 12:06:23 /kernel: fxp0: device timeout
Jul 4 12:06:23 /kernel: fxp0: DMA timeout
Jul 4 12:06:23 last message repeated 2 times
Jul 4 12:06:35 /kernel: fxp0: command queue timeout
Jul 4 12:06:51 /kernel: fxp0: DMA timeout
Jul 4 12:06:53 last message repeated 5 times
Jul 4 12:07:08 /kernel: fxp0: command queue timeout
Jul 4 12:07:29 /kernel: fxp0: device timeout
Jul 4 12:07:29 /kernel: fxp0: DMA timeout
Jul 4 12:07:35 last message repeated 8 times
Jul 4 12:07:42 /kernel: fxp0: command queue timeout
Jul 4 12:08:03 /kernel: fxp0: device timeout
Jul 4 12:08:03 /kernel: fxp0: DMA timeout
Jul 4 12:08:03 last message repeated 2 times
Jul 4 12:08:15 /kernel: fxp0: command queue timeout
Jul 4 12:08:36 /kernel: fxp0: device timeout
Jul 4 12:08:36 /kernel: fxp0: DMA timeout
Jul 4 12:08:36 last message repeated 2 times
Jul 4 12:08:48 /kernel: fxp0: command queue timeout
Jul 4 12:09:08 /kernel: fxp0: device timeout
Jul 4 12:09:08 /kernel: fxp0: DMA timeout
Jul 4 12:09:08 last message repeated 2 times
Jul 4 12:09:20 /kernel: fxp0: command queue timeout
Jul 4 12:09:40 /kernel: fxp0: device timeout
>How-To-Repeat:
Happens every time, removing ethernet cards, memory and playing with the BIOS doesn't seem to change anything.
Installing FreeBSD 4.5 doesn't work, too.
>Fix:
Installing OpenBSD 3.1 works and the Ethernet cards are usable - the chipset is not explicitly supported and runs in compatibility mode.
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200207041645.g64Gj7jv010335>