Date: Wed, 24 Jul 2013 15:53:15 +0000 (UTC) From: Gabor Kovesdan <gabor@FreeBSD.org> To: doc-committers@freebsd.org, svn-doc-all@freebsd.org, svn-doc-head@freebsd.org Subject: svn commit: r42418 - in head: pl_PL.ISO8859-2/books/handbook/boot pl_PL.ISO8859-2/books/handbook/cutting-edge pl_PL.ISO8859-2/books/handbook/l10n pl_PL.ISO8859-2/books/handbook/mail pl_PL.ISO8859-2... Message-ID: <201307241553.r6OFrFkn020411@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: gabor Date: Wed Jul 24 15:53:14 2013 New Revision: 42418 URL: http://svnweb.freebsd.org/changeset/doc/42418 Log: - Fix misplaced indexterms Modified: head/pl_PL.ISO8859-2/books/handbook/boot/chapter.xml head/pl_PL.ISO8859-2/books/handbook/cutting-edge/chapter.xml head/pl_PL.ISO8859-2/books/handbook/l10n/chapter.xml head/pl_PL.ISO8859-2/books/handbook/mail/chapter.xml head/pl_PL.ISO8859-2/books/handbook/network-servers/chapter.xml head/pl_PL.ISO8859-2/books/handbook/ppp-and-slip/chapter.xml head/ru_RU.KOI8-R/books/handbook/boot/chapter.xml head/ru_RU.KOI8-R/books/handbook/cutting-edge/chapter.xml head/ru_RU.KOI8-R/books/handbook/mail/chapter.xml head/ru_RU.KOI8-R/books/handbook/network-servers/chapter.xml Modified: head/pl_PL.ISO8859-2/books/handbook/boot/chapter.xml ============================================================================== --- head/pl_PL.ISO8859-2/books/handbook/boot/chapter.xml Wed Jul 24 14:41:29 2013 (r42417) +++ head/pl_PL.ISO8859-2/books/handbook/boot/chapter.xml Wed Jul 24 15:53:14 2013 (r42418) @@ -466,10 +466,9 @@ boot:</screen> <para>Here are some practical examples of loader usage:</para> <itemizedlist> - <indexterm><primary>single-user mode</primary></indexterm> <listitem> <para>To simply boot your usual kernel, but in single-user - mode:</para> + mode:<indexterm><primary>single-user mode</primary></indexterm></para> <screen><userinput>boot -s</userinput></screen> </listitem> @@ -477,16 +476,12 @@ boot:</screen> <listitem> <para>To unload your usual kernel and modules, and then load just your old (or another) kernel:</para> - <indexterm> - <primary><filename>kernel.old</filename></primary> - </indexterm> - <screen><userinput>unload</userinput> <userinput>load <replaceable>kernel.old</replaceable></userinput></screen> <para>You can use <filename>kernel.GENERIC</filename> to refer to the generic kernel that comes on the install - disk, or <filename>kernel.old</filename> to refer to + disk, or <filename>kernel.old</filename><indexterm><primary><filename>kernel.old</filename></primary></indexterm> to refer to your previously installed kernel (when you have upgraded or configured your own kernel, for example).</para> Modified: head/pl_PL.ISO8859-2/books/handbook/cutting-edge/chapter.xml ============================================================================== --- head/pl_PL.ISO8859-2/books/handbook/cutting-edge/chapter.xml Wed Jul 24 14:41:29 2013 (r42417) +++ head/pl_PL.ISO8859-2/books/handbook/cutting-edge/chapter.xml Wed Jul 24 15:53:14 2013 (r42418) @@ -186,13 +186,9 @@ <sect3> <title>Using &os.current;</title> - <indexterm> - <primary>-CURRENT</primary> - <secondary>using</secondary> - </indexterm> <orderedlist> <listitem> - <para>Join the &a.current.name; and the &a.cvsall.name; lists. This is not + <para>Join the &a.current.name;<indexterm><primary>-CURRENT</primary><secondary>using</secondary></indexterm> and the &a.cvsall.name; lists. This is not just a good idea, it is <emphasis>essential</emphasis>. If you are not on the <emphasis>&a.current.name;</emphasis> list, you will not see the comments that people are @@ -217,39 +213,23 @@ site</link>. You can do this in one of two ways:</para> <orderedlist> - <indexterm> - <primary><command>cvsup</command></primary> - </indexterm> - <indexterm> - <primary><command>cron</command></primary> - </indexterm> - <indexterm> - <primary>-CURRENT</primary> - <secondary>Syncing with <application>CVSup</application></secondary> - </indexterm> - <listitem> - <para>Use the <link linkend="cvsup">cvsup</link> program + <para>Use the <link linkend="cvsup">cvsup</link><indexterm><primary><command>cvsup</command></primary></indexterm> program with the <filename>supfile</filename> named <filename>standard-supfile</filename> available from <filename>/usr/share/examples/cvsup</filename>. This is the most recommended method, since it allows you to grab the entire collection once and then only what has changed from then on. Many people run <command>cvsup</command> from - <command>cron</command> and keep their + <command>cron</command><indexterm><primary><command>cron</command></primary></indexterm> and keep their sources up-to-date automatically. You have to customize the sample <filename>supfile</filename> above, and configure - <link linkend="cvsup">cvsup</link> for your environment.</para> + <link linkend="cvsup">cvsup</link><indexterm><primary>-CURRENT</primary><secondary>Syncing with <application>CVSup</application></secondary></indexterm> for your environment.</para> </listitem> <listitem> - <indexterm> - <primary>-CURRENT</primary> - <secondary>Syncing with CTM</secondary> - </indexterm> - <para>Use the <application><link - linkend="ctm">CTM</link></application> facility. If you + linkend="ctm">CTM</link></application><indexterm><primary>-CURRENT</primary><secondary>Syncing with CTM</secondary></indexterm> facility. If you have very bad connectivity (high price connections or only email access) <application>CTM</application> is an option. However, it is a lot of hassle and can give you broken files. @@ -271,11 +251,7 @@ to compile just a subset is almost guaranteed to get you into trouble.</para> - <indexterm> - <primary>-CURRENT</primary> - <secondary>compiling</secondary> - </indexterm> - <para>Before compiling &os.current;, read the + <para>Before compiling &os.current;<indexterm><primary>-CURRENT</primary><secondary>compiling</secondary></indexterm>, read the <filename>Makefile</filename> in <filename>/usr/src</filename> carefully. You should at least <link linkend="makeworld">install a new kernel and rebuild the world</link> the first time through @@ -360,12 +336,7 @@ <orderedlist> <listitem> - <indexterm> - <primary>-STABLE</primary> - <secondary>using</secondary> - </indexterm> - - <para>Join the &a.stable.name; list. This will keep you informed of + <para>Join the &a.stable.name;<indexterm><primary>-STABLE</primary><secondary>using</secondary></indexterm> list. This will keep you informed of build-dependencies that may appear in &os.stable; or any other issues requiring special attention. Developers will also make announcements @@ -402,18 +373,7 @@ <orderedlist> <listitem> - <indexterm> - <primary><command>cvsup</command></primary> - </indexterm> - <indexterm> - <primary><command>cron</command></primary> - </indexterm> - <indexterm> - <primary>-STABLE</primary> - <secondary>syncing with <application>CVSup</application></secondary> - </indexterm> - - <para>Use the <link linkend="cvsup">cvsup</link> program + <para>Use the <link linkend="cvsup">cvsup</link><indexterm><primary><command>cvsup</command></primary></indexterm> program with the <filename>supfile</filename> named <filename>stable-supfile</filename> from the directory <filename>/usr/share/examples/cvsup</filename>. @@ -421,21 +381,16 @@ method, since it allows you to grab the entire collection once and then only what has changed from then on. Many people run <command>cvsup</command> from - <command>cron</command> to keep their + <command>cron</command><indexterm><primary><command>cron</command></primary></indexterm> to keep their sources up-to-date automatically. You have to customize the sample <filename>supfile</filename> above, - and configure <link linkend="cvsup">cvsup</link> for your + and configure <link linkend="cvsup">cvsup</link><indexterm><primary>-STABLE</primary><secondary>syncing with <application>CVSup</application></secondary></indexterm> for your environment.</para> </listitem> <listitem> - <indexterm> - <primary>-STABLE</primary> - <secondary>syncing with CTM</secondary> - </indexterm> - <para>Use the <application><link - linkend="ctm">CTM</link></application> facility. If + linkend="ctm">CTM</link></application><indexterm><primary>-STABLE</primary><secondary>syncing with CTM</secondary></indexterm> facility. If you do not have a fast and inexpensive connection to the Internet, this is the method you should consider using. @@ -452,12 +407,7 @@ </listitem> <listitem> - <indexterm> - <primary>-STABLE</primary> - <secondary>compiling</secondary> - </indexterm> - - <para>Before compiling &os.stable;, read the + <para>Before compiling &os.stable;<indexterm><primary>-STABLE</primary><secondary>compiling</secondary></indexterm>, read the <filename>Makefile</filename> in <filename>/usr/src</filename> carefully. You should at least <link linkend="makeworld">install a new kernel and rebuild the world</link> the first time through Modified: head/pl_PL.ISO8859-2/books/handbook/l10n/chapter.xml ============================================================================== --- head/pl_PL.ISO8859-2/books/handbook/l10n/chapter.xml Wed Jul 24 14:41:29 2013 (r42417) +++ head/pl_PL.ISO8859-2/books/handbook/l10n/chapter.xml Wed Jul 24 15:53:14 2013 (r42418) @@ -228,16 +228,13 @@ files:</para> <itemizedlist> - <indexterm><primary>POSIX</primary></indexterm> <listitem> - <para><envar>LANG</envar> for &posix; &man.setlocale.3; family + <para><envar>LANG</envar> for &posix;<indexterm><primary>POSIX</primary></indexterm> &man.setlocale.3; family functions</para> </listitem> <listitem> - <indexterm><primary>MIME</primary></indexterm> - - <para><envar>MM_CHARSET</envar> for applications' MIME character + <para><envar>MM_CHARSET</envar> for applications' MIME<indexterm><primary>MIME</primary></indexterm> character set</para> </listitem> </itemizedlist> Modified: head/pl_PL.ISO8859-2/books/handbook/mail/chapter.xml ============================================================================== --- head/pl_PL.ISO8859-2/books/handbook/mail/chapter.xml Wed Jul 24 14:41:29 2013 (r42417) +++ head/pl_PL.ISO8859-2/books/handbook/mail/chapter.xml Wed Jul 24 15:53:14 2013 (r42418) @@ -1176,9 +1176,8 @@ www.example.org</programlisting> things:</para> <itemizedlist> - <indexterm><primary>MX record</primary></indexterm> <listitem> - <para>Make sure that the (lowest-numbered) MX record in your DNS points to your + <para>Make sure that the (lowest-numbered) MX record<indexterm><primary>MX record</primary></indexterm> in your DNS points to your host's IP address.</para> </listitem> Modified: head/pl_PL.ISO8859-2/books/handbook/network-servers/chapter.xml ============================================================================== --- head/pl_PL.ISO8859-2/books/handbook/network-servers/chapter.xml Wed Jul 24 14:41:29 2013 (r42417) +++ head/pl_PL.ISO8859-2/books/handbook/network-servers/chapter.xml Wed Jul 24 15:53:14 2013 (r42418) @@ -1248,12 +1248,8 @@ Exports list on foobar: <title>Machine Types</title> <itemizedlist> - <indexterm> - <primary>NIS</primary> - <secondary>master server</secondary> - </indexterm> <listitem> - <para>A <emphasis>NIS master server</emphasis>. This + <para>A <emphasis>NIS master server</emphasis><indexterm><primary>NIS</primary><secondary>master server</secondary></indexterm>. This server, analogous to a &windowsnt; primary domain controller, maintains the files used by all of the NIS clients. The <filename>passwd</filename>, @@ -1268,12 +1264,7 @@ Exports list on foobar: </listitem> <listitem> - <indexterm> - <primary>NIS</primary> - <secondary>slave server</secondary> - </indexterm> - - <para><emphasis>NIS slave servers</emphasis>. Similar to + <para><emphasis>NIS slave servers</emphasis><indexterm><primary>NIS</primary><secondary>slave server</secondary></indexterm>. Similar to the &windowsnt; backup domain controllers, NIS slave servers maintain copies of the NIS master's data files. NIS slave servers provide the redundancy, which is @@ -1284,12 +1275,7 @@ Exports list on foobar: </listitem> <listitem> - <indexterm> - <primary>NIS</primary> - <secondary>client</secondary> - </indexterm> - - <para><emphasis>NIS clients</emphasis>. NIS clients, like + <para><emphasis>NIS clients</emphasis><indexterm><primary>NIS</primary><secondary>client</secondary></indexterm>. NIS clients, like most &windowsnt; workstations, authenticate against the NIS server (or the &windowsnt; domain controller in the &windowsnt; workstations case) to log on.</para> @@ -4387,9 +4373,7 @@ DocumentRoot /www/someotherdomain.tld <term><literal>netbios name</literal></term> <listitem> - <indexterm><primary>NetBIOS</primary></indexterm> - - <para>This sets the NetBIOS name by which a <application>Samba</application> server + <para>This sets the NetBIOS<indexterm><primary>NetBIOS</primary></indexterm> name by which a <application>Samba</application> server is known. By default it is the same as the first component of the host's DNS name.</para> </listitem> @@ -4443,13 +4427,9 @@ DocumentRoot /www/someotherdomain.tld <term><literal>passdb backend</literal></term> <listitem> - <indexterm><primary>NIS+</primary></indexterm> - <indexterm><primary>LDAP</primary></indexterm> - <indexterm><primary>SQL database</primary></indexterm> - <para><application>Samba</application> has several different backend authentication models. You can - authenticate clients with LDAP, NIS+, a SQL database, + authenticate clients with LDAP<indexterm><primary>LDAP</primary></indexterm>, NIS+<indexterm><primary>NIS+</primary></indexterm>, a SQL database<indexterm><primary>SQL database</primary></indexterm>, or a modified password file. The default authentication method is <literal>smbpasswd</literal>, and that is all that will be covered here.</para> Modified: head/pl_PL.ISO8859-2/books/handbook/ppp-and-slip/chapter.xml ============================================================================== --- head/pl_PL.ISO8859-2/books/handbook/ppp-and-slip/chapter.xml Wed Jul 24 14:41:29 2013 (r42417) +++ head/pl_PL.ISO8859-2/books/handbook/ppp-and-slip/chapter.xml Wed Jul 24 15:53:14 2013 (r42418) @@ -144,15 +144,9 @@ <para>This document assumes you have the following:</para> <itemizedlist> - <indexterm id="ppp-isp"> - <primary>ISP</primary> - </indexterm> - <indexterm id="ppp-ppp2"> - <primary>PPP</primary> - </indexterm> <listitem> - <para>An account with an Internet Service Provider (ISP) which - you connect to using PPP.</para> + <para>An account with an Internet Service Provider (ISP)<indexterm id="ppp-isp"><primary>ISP</primary></indexterm> which + you connect to using PPP<indexterm id="ppp-ppp2"><primary>PPP</primary></indexterm>.</para> </listitem> <listitem> @@ -166,32 +160,14 @@ </listitem> <listitem> - <indexterm id="ppp-pap"> - <primary>PAP</primary> - </indexterm> - <indexterm id="ppp-chap"> - <primary>CHAP</primary> - </indexterm> - <indexterm id="ppp-unix"> - <primary>UNIX</primary> - </indexterm> - <indexterm id="ppp-login"> - <primary>login name</primary> - </indexterm> - <indexterm id="ppp-password"> - <primary>password</primary> - </indexterm> - <para>Your login name and password. (Either a - regular &unix; style login and password pair, or a PAP or CHAP + <para>Your login name<indexterm id="ppp-login"><primary>login name</primary></indexterm> and password<indexterm id="ppp-password"><primary>password</primary></indexterm>. (Either a + regular &unix;<indexterm id="ppp-unix"><primary>UNIX</primary></indexterm> style login and password pair, or a + PAP<indexterm id="ppp-pap"><primary>PAP</primary></indexterm> or CHAP<indexterm id="ppp-chap"><primary>CHAP</primary></indexterm> login and password pair.)</para> </listitem> <listitem> - <indexterm id="ppp-nameserver"> - <primary>nameserver</primary> - </indexterm> - - <para>The IP address of one or more name servers. + <para>The IP address of one or more name servers<indexterm id="ppp-nameserver"><primary>nameserver</primary></indexterm>. Normally, you will be given two IP addresses by your ISP to use for this. If they have not given you at least one, then you can use the <command>enable dns</command> command in @@ -225,11 +201,7 @@ </listitem> <listitem> - <indexterm id="ppp-static-ip"> - <primary>static IP address</primary> - </indexterm> - - <para>If your ISP provides you with a static IP address and + <para>If your ISP provides you with a static IP address<indexterm id="ppp-static-ip"><primary>static IP address</primary></indexterm> and hostname, you can enter it. Otherwise, we simply let the peer assign whatever IP address it sees fit.</para> </listitem> @@ -362,9 +334,7 @@ <term>Line 6 & 7:</term> <listitem> - <indexterm><primary>PPP</primary><secondary>user PPP</secondary></indexterm> - - <para>The dial string. User PPP uses an expect-send + <para>The dial string. User PPP<indexterm><primary>PPP</primary><secondary>user PPP</secondary></indexterm> uses an expect-send syntax similar to the &man.chat.8; program. Refer to the manual page for information on the features of this language.</para> @@ -455,11 +425,9 @@ <term>Line 15:</term> <listitem> - <indexterm><primary>PAP</primary></indexterm> - <indexterm><primary>CHAP</primary></indexterm> <para>If you are using PAP or CHAP, there will be no login at this point, and this line should be commented out or - removed. See <link linkend="userppp-PAPnCHAP">PAP and CHAP + removed. See <link linkend="userppp-PAPnCHAP">PAP<indexterm><primary>PAP</primary></indexterm> and CHAP<indexterm><primary>CHAP</primary></indexterm> authentication</link> for further details.</para> <para>The login string is of the same chat-like syntax as @@ -483,9 +451,7 @@ protocol: ppp</screen> <term>Line 16:</term> <listitem> - <indexterm><primary>timeout</primary></indexterm> - - <para>Sets the default idle timeout (in seconds) for the + <para>Sets the default idle timeout<indexterm><primary>timeout</primary></indexterm> (in seconds) for the connection. Here, the connection will be closed automatically after 300 seconds of inactivity. If you never want to timeout, set this value to zero or use @@ -496,14 +462,12 @@ protocol: ppp</screen> <varlistentry> <term>Line 17:</term> <listitem> - <indexterm><primary>ISP</primary></indexterm> - <para>Sets the interface addresses. The string <replaceable>x.x.x.x</replaceable> should be replaced by the IP address that your provider has allocated to you. The string <replaceable>y.y.y.y</replaceable> should be - replaced by the IP address that your ISP indicated + replaced by the IP address that your ISP<indexterm><primary>ISP</primary></indexterm> indicated for their gateway (the machine to which you connect). If your ISP has not given you a gateway address, use <hostid @@ -979,9 +943,7 @@ set nbns 203.14.100.5</programlisting> <varlistentry> <term>Line 14:</term> <listitem> - <indexterm><primary>password</primary></indexterm> - - <para>This line specifies your PAP/CHAP password. You + <para>This line specifies your PAP/CHAP password<indexterm><primary>password</primary></indexterm>. You will need to insert the correct value for <replaceable>MyPassword</replaceable>. You may want to add an additional line, such as:</para> @@ -1288,11 +1250,9 @@ ifconfig_tun0=</programlisting> </listitem> <listitem> - <indexterm><primary>PPP</primary><secondary>server</secondary></indexterm> - <para>As a <quote>server</quote> — your machine is located on the network, and is used to connect other computers using - PPP.</para> + PPP<indexterm><primary>PPP</primary><secondary>server</secondary></indexterm>.</para> </listitem> </orderedlist> @@ -2486,9 +2446,7 @@ tun0: flags=8051<UP,POINTOPOINT,RUNNI </listitem> <listitem> - <indexterm><primary>default route</primary></indexterm> - - <para>Designate the default router by changing the + <para>Designate the default router<indexterm><primary>default route</primary></indexterm> by changing the line:</para> <programlisting>defaultrouter="NO"</programlisting> @@ -2508,10 +2466,8 @@ tun0: flags=8051<UP,POINTOPOINT,RUNNI nameserver 128.32.136.9 nameserver 128.32.136.12</programlisting> - <indexterm><primary>nameserver</primary></indexterm> - <indexterm><primary>domain name</primary></indexterm> - <para>As you can see, these set up the nameserver hosts. Of - course, the actual domain names and addresses depend on your + <para>As you can see, these set up the nameserver<indexterm><primary>nameserver</primary></indexterm> hosts. Of + course, the actual domain names<indexterm><primary>domain name</primary></indexterm> and addresses depend on your environment.</para> </step> Modified: head/ru_RU.KOI8-R/books/handbook/boot/chapter.xml ============================================================================== --- head/ru_RU.KOI8-R/books/handbook/boot/chapter.xml Wed Jul 24 14:41:29 2013 (r42417) +++ head/ru_RU.KOI8-R/books/handbook/boot/chapter.xml Wed Jul 24 15:53:14 2013 (r42418) @@ -500,10 +500,9 @@ boot: загрузчика:</para> <itemizedlist> - <indexterm><primary>однопользовательский режим</primary></indexterm> <listitem> <para>Чтобы просто загрузить ваше ядро обычным образом, но в - однопользовательском режиме:</para> + однопользовательском режиме:<indexterm><primary>однопользовательский режим</primary></indexterm></para> <screen><userinput>boot -s</userinput></screen> </listitem> @@ -511,16 +510,13 @@ boot: <listitem> <para>Для выгрузки обычных ядра и модулей, а потом просто загрузить ваше старое (или другое) ядро:</para> - <indexterm> - <primary><filename>kernel.old</filename></primary> - </indexterm> <screen><userinput>unload</userinput> <userinput>load <replaceable>kernel.old</replaceable></userinput></screen> <para>Вы можете использовать <filename>kernel.GENERIC</filename> для обозначения стандартного ядра, поставляемого на установочном - диске, или <filename>kernel.old</filename> для обращения к ранее + диске, или <filename>kernel.old</filename><indexterm><primary><filename>kernel.old</filename></primary></indexterm> для обращения к ранее установленному ядру (после того, как, например, вы обновили или отконфигурировали новое ядро).</para> Modified: head/ru_RU.KOI8-R/books/handbook/cutting-edge/chapter.xml ============================================================================== --- head/ru_RU.KOI8-R/books/handbook/cutting-edge/chapter.xml Wed Jul 24 14:41:29 2013 (r42417) +++ head/ru_RU.KOI8-R/books/handbook/cutting-edge/chapter.xml Wed Jul 24 15:53:14 2013 (r42418) @@ -701,15 +701,9 @@ Fetching 133 new ports or files... done. <sect3> <title>Использование &os.current;</title> - <indexterm> - <primary>-CURRENT</primary> - - <secondary>использование</secondary> - </indexterm> - <orderedlist> <listitem> - <para>Подпишитесь на списки рассылки &a.current.name; и + <para>Подпишитесь на списки рассылки &a.current.name;<indexterm><primary>-CURRENT</primary><secondary>использование</secondary></indexterm> и &a.svn-src-head.name;. Это не просто хорошая идея, это <emphasis>необходимость</emphasis>. Если вы не являетесь участником списка рассылки <emphasis>&a.current.name;</emphasis>, @@ -738,23 +732,8 @@ Fetching 133 new ports or files... done. сделать это одним из следующих двух способов:</para> <orderedlist> - <indexterm> - <primary><command>cvsup</command></primary> - </indexterm> - - <indexterm> - <primary><command>cron</command></primary> - </indexterm> - - <indexterm> - <primary>-CURRENT</primary> - <secondary> - Синхронизация при помощи <application>CVSup</application> - </secondary> - </indexterm> - <listitem> - <para>При помощи программы <link linkend="cvsup">cvsup</link> + <para>При помощи программы <link linkend="cvsup">cvsup</link><indexterm><primary><command>cvsup</command></primary></indexterm> с <filename>sup</filename>-файлом <filename>standard-supfile</filename>, который можно найти в каталоге <filename>/usr/share/examples/cvsup</filename>. Это @@ -763,10 +742,10 @@ Fetching 133 new ports or files... done. исходных текстов один раз полностью, а затем загружать только произошедшие изменения. Многие запускают <command>cvsup</command> при помощи программы - <command>cron</command> и получают самые свежие исходные + <command>cron</command><indexterm><primary><command>cron</command></primary></indexterm> и получают самые свежие исходные тексты автоматически. Измените примерный файл <filename>supfile</filename> выше и отконфигурируйте <link - linkend="cvsup">cvsup</link> для вашего окружения.</para> + linkend="cvsup">cvsup</link><indexterm><primary>-CURRENT</primary><secondary>Синхронизация при помощи <application>CVSup</application></secondary></indexterm> для вашего окружения.</para> <note> <para>Примерный файл <filename>standard-supfile</filename> предназначен для отслеживания специальной ветки @@ -817,13 +796,7 @@ Fetching 133 new ports or files... done. компиляции лишь некоторой части программ в этом случае гарантированно вызовет проблемы.</para> - <indexterm> - <primary>-CURRENT</primary> - - <secondary>компиляция</secondary> - </indexterm> - - <para>Перед тем, как компилировать &os.current;, внимательно + <para>Перед тем, как компилировать &os.current;<indexterm><primary>-CURRENT</primary><secondary>компиляция</secondary></indexterm>, внимательно прочтите файл <filename>Makefile</filename> в каталоге <filename>/usr/src</filename>. В процессе обновления вы по крайней мере раз должны пройти через <link @@ -910,13 +883,9 @@ Fetching 133 new ports or files... done. <sect3> <title>Использование &os.stable;</title> - <indexterm> - <primary>-STABLE</primary> - <secondary>использование</secondary> - </indexterm> <orderedlist> <listitem> - <para>Подпишитесь на список рассылки &a.stable.name;. Это позволит + <para>Подпишитесь на список рассылки &a.stable.name;<indexterm><primary>-STABLE</primary><secondary>использование</secondary></indexterm>. Это позволит вам узнавать о зависимостях процесса компиляции, которые могут появиться в ветке &os.stable; или любых других проблемах, требующих особого внимания. В этом @@ -959,23 +928,7 @@ Fetching 133 new ports or files... done. <orderedlist> <listitem> - <indexterm> - <primary><command>cvsup</command></primary> - </indexterm> - - <indexterm> - <primary><command>cron</command></primary> - </indexterm> - - <indexterm> - <primary>-STABLE</primary> - - <secondary> - Синхронизация при помощи <application>CVSup</application> - </secondary> - </indexterm> - - <para>При помощи программы <link linkend="cvsup">cvsup</link> + <para>При помощи программы <link linkend="cvsup">cvsup</link><indexterm><primary><command>cvsup</command></primary></indexterm> с <filename>sup</filename>-файлом <filename>stable-supfile</filename> из каталога <filename>/usr/share/examples/cvsup</filename>. @@ -984,20 +937,15 @@ Fetching 133 new ports or files... done. текстов один раз полностью, а затем загружать только произошедшие изменения. Многие запускают <command>cvsup</command> при помощи программы - <command>cron</command> и получают самые свежие исходные + <command>cron</command><indexterm><primary><command>cron</command></primary></indexterm> и получают самые свежие исходные тексты автоматически. Измените примерный файл <filename>supfile</filename> выше и отконфигурируйте <link - linkend="cvsup">cvsup</link> для вашего окружения.</para> + linkend="cvsup">cvsup</link><indexterm><primary>-STABLE</primary><secondary>Синхронизация при помощи <application>CVSup</application></secondary></indexterm> для вашего окружения.</para> </listitem> <listitem> - <indexterm> - <primary>-STABLE</primary> - <secondary>синхронизация при помощи CTM</secondary> - </indexterm> - <para>При помощи <application><link - linkend="ctm">CTM</link></application>. Если у вас нет + linkend="ctm">CTM</link></application><indexterm><primary>-STABLE</primary><secondary>синхронизация при помощи CTM</secondary></indexterm>. Если у вас нет быстрого и недорогого подключения к Интернет, то это как раз тот метод, которым вы должны воспользоваться.</para> </listitem> @@ -1013,12 +961,7 @@ Fetching 133 new ports or files... done. </listitem> <listitem> - <indexterm> - <primary>-STABLE</primary> - <secondary>компиляция</secondary> - </indexterm> - - <para>Перед тем, как компилировать &os.stable;, внимательно + <para>Перед тем, как компилировать &os.stable;<indexterm><primary>-STABLE</primary><secondary>компиляция</secondary></indexterm>, внимательно прочтите файл <filename>Makefile</filename> в каталоге <filename>/usr/src</filename>. В процессе обновления вы по крайней мере раз должны пройти через <link Modified: head/ru_RU.KOI8-R/books/handbook/mail/chapter.xml ============================================================================== --- head/ru_RU.KOI8-R/books/handbook/mail/chapter.xml Wed Jul 24 14:41:29 2013 (r42417) +++ head/ru_RU.KOI8-R/books/handbook/mail/chapter.xml Wed Jul 24 15:53:14 2013 (r42418) @@ -1195,12 +1195,8 @@ www.example.org</programlisting> хост, необходимо убедиться в одном из двух:</para> <itemizedlist> - <indexterm> - <primary>MX record</primary> - </indexterm> - <listitem> - <para>Убедитесь, что запись (с наименьшим номером) MX в + <para>Убедитесь, что запись (с наименьшим номером) MX в<indexterm><primary>MX record</primary></indexterm> DNS соответствует IP адресу вашего хоста.</para> </listitem> Modified: head/ru_RU.KOI8-R/books/handbook/network-servers/chapter.xml ============================================================================== --- head/ru_RU.KOI8-R/books/handbook/network-servers/chapter.xml Wed Jul 24 14:41:29 2013 (r42417) +++ head/ru_RU.KOI8-R/books/handbook/network-servers/chapter.xml Wed Jul 24 15:53:14 2013 (r42418) @@ -1332,13 +1332,8 @@ Exports list on foobar: <title>Типы машин</title> <itemizedlist> - <indexterm> - <primary>NIS</primary> - <secondary>главный сервер</secondary> - </indexterm> - <listitem> - <para><emphasis>Основной сервер NIS</emphasis>. + <para><emphasis>Основной сервер NIS</emphasis><indexterm><primary>NIS</primary><secondary>главный сервер</secondary></indexterm>. Такой сервер, по аналогии с первичным контроллером домена &windowsnt;, хранит файлы, используемые всеми клиентами NIS. Файлы <filename>passwd</filename>, <filename>group</filename> и @@ -1354,12 +1349,7 @@ Exports list on foobar: </listitem> <listitem> - <indexterm> - <primary>NIS</primary> - <secondary>вторичный сервер</secondary> - </indexterm> - - <para><emphasis>Вторичные серверы NIS</emphasis>. Похожие на + <para><emphasis>Вторичные серверы NIS</emphasis><indexterm><primary>NIS</primary><secondary>вторичный сервер</secondary></indexterm>. Похожие на вторичные контроллеры доменов &windowsnt;, вторичные серверы NIS содержат копии оригинальных файлов данных NIS. Вторичные серверы NIS обеспечивают избыточность, что нужно в критичных @@ -1370,12 +1360,7 @@ Exports list on foobar: </listitem> <listitem> - <indexterm> - <primary>NIS</primary> - <secondary>клиент</secondary> - </indexterm> - - <para><emphasis>Клиенты NIS</emphasis>. + <para><emphasis>Клиенты NIS</emphasis><indexterm><primary>NIS</primary><secondary>клиент</secondary></indexterm>. Клиенты NIS, как и большинство рабочих станций &windowsnt;, аутентифицируются на сервере NIS (или на контроллере домена &windowsnt; для рабочих станций &windowsnt;) во время
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201307241553.r6OFrFkn020411>