Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 3 Jul 2005 01:10:53 GMT
From:      Arun Sharma <arun.sharma@intel.com>
To:        freebsd-ia64@FreeBSD.org
Subject:   Re: ia64/72128: 5.3-beta6 doesn't boot
Message-ID:  <200507030110.j631Ar20020536@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help
The following reply was made to PR ia64/72128; it has been noted by GNATS.

From: Arun Sharma <arun.sharma@intel.com>
To: Jens Axboe <axboe@kernel.dk>
Cc: freebsd-bugs@freebsd.org
Subject: Re: ia64/72128: 5.3-beta6 doesn't boot
Date: Mon, 18 Oct 2004 12:36:56 -0700

 This is a multi-part message in MIME format.
 --------------010800020801000604010405
 Content-Type: text/plain; charset=ISO-8859-1; format=flowed
 Content-Transfer-Encoding: 7bit
 
 On 10/18/2004 4:34 AM, Jens Axboe wrote:
 > On Sat, Oct 09 2004, Jens Axboe wrote:
 >> On Fri, Oct 08 2004, Arun Sharma wrote:
 >> > On 10/8/2004 2:24 PM, Arun Sharma wrote:
 >> > >On 10/7/2004 11:02 PM, Mark Linimon wrote:
 >> > >
 >> > >>This may be processor-specific.
 >> > >>
 >> > >>http://www.freebsd.org/cgi/query-pr.cgi?pr=72128
 >> > >
 >> > >
 >> > >I just tested that the 5.3-beta7 works fine on a 4 way Tiger with 1GB 
 >> > >RAM. I don't think there have been critical bug fixes between beta6 and 
 >> > >beta7 that affect the tiger. Also, on a 4GB machine, FreeBSD ignores RAM 
 >> > >above 1GB.
 >> > 
 >> > I meant to say FreeBSD ignores RAM above 4GB physical. So depending on your 
 >> > memory map, this may or may not be a problem.
 >> 
 >> I can verify my memory map in Linux, I'll send it in on the next boot.
 > 
 > Sorry about the delay, was away on business.
 > 
 > These are the only comments that Linux gives about the memory layout:
 > 
 
 I can't reproduce your problem on a tiger4 with 4GB RAM. Attached is the memory map obtained via memmap EFI command and the dmesg.
 
 	-Arun
 
 
 --------------010800020801000604010405
 Content-Type: text/plain;
  name="bsd53.txt"
 Content-Transfer-Encoding: 7bit
 Content-Disposition: inline;
  filename="bsd53.txt"
 
 fs1:\> memmap
 Type       Start            End               # Pages          Attributes
 BS_data    0000000000000000-0000000000000FFF  0000000000000001 0000000000000009
 available  0000000000001000-0000000000006FFF  0000000000000006 0000000000000009
 BS_data    0000000000007000-0000000000008FFF  0000000000000002 0000000000000009
 available  0000000000009000-0000000000081FFF  0000000000000079 0000000000000009
 RT_data    0000000000082000-0000000000083FFF  0000000000000002 8000000000000009
 available  0000000000084000-0000000000084FFF  0000000000000001 0000000000000009
 BS_data    0000000000085000-000000000009FFFF  000000000000001B 0000000000000009
 RT_code    00000000000C0000-00000000000FFFFF  0000000000000040 8000000000000009
 available  0000000000100000-000000000FF7FFFF  000000000000FE80 000000000000000B
 BS_data    000000000FF80000-000000000FFFFFFF  0000000000000080 000000000000000B
 available  0000000010000000-000000007D8FFFFF  000000000006D900 000000000000000B
 BS_code    000000007D900000-000000007F97FFFF  0000000000002080 000000000000000B
 available  000000007F980000-000000007F9FFFFF  0000000000000080 000000000000000B
 RT_code    000000007FA00000-000000007FDFFFFF  0000000000000400 8000000000000009
 PAL_code   000000007FE00000-000000007FE3FFFF  0000000000000040 8000000000000009
 RT_code    000000007FE40000-000000007FE95FFF  0000000000000056 8000000000000009
 available  000000007FE96000-000000007FF21FFF  000000000000008C 000000000000000B
 BS_data    000000007FF22000-000000007FF2FFFF  000000000000000E 000000000000000B
 RT_data    000000007FF30000-000000007FFFFFFF  00000000000000D0 8000000000000009
 MemMapIO   00000000FE000000-00000000FEFFFFFF  0000000000001000 0000000000000001
 RT_data    00000000FF000000-00000000FFFFFFFF  0000000000001000 8000000000000001
 available  0000000180000000-00000001FEFAFFFF  000000000007EFB0 000000000000000B
 LoaderData 00000001FEFB0000-00000001FEFB7FFF  0000000000000008 000000000000000B
 LoaderCode 00000001FEFB8000-00000001FEFFDFFF  0000000000000046 000000000000000B
 available  00000001FEFFE000-00000001FF453FFF  0000000000000456 000000000000000B
 BS_data    00000001FF454000-00000001FF800FFF  00000000000003AD 000000000000000B
 available  00000001FF801000-00000001FF883FFF  0000000000000083 000000000000000B
 BS_data    00000001FF884000-00000001FF885FFF  0000000000000002 000000000000000B
 available  00000001FF886000-00000001FF887FFF  0000000000000002 000000000000000B
 BS_data    00000001FF888000-00000001FF9F9FFF  0000000000000172 000000000000000B
 available  00000001FF9FA000-00000001FF9FAFFF  0000000000000001 000000000000000B
 BS_data    00000001FF9FB000-00000001FF9FDFFF  0000000000000003 000000000000000B
 available  00000001FF9FE000-00000001FFD83FFF  0000000000000386 000000000000000B
 BS_code    00000001FFD84000-00000001FFDFDFFF  000000000000007A 000000000000000B
 available  00000001FFDFE000-00000001FFE11FFF  0000000000000014 000000000000000B
 RT_code    00000001FFE12000-00000001FFE7DFFF  000000000000006C 8000000000000009
 available  00000001FFE7E000-00000001FFFB9FFF  000000000000013C 000000000000000B
 RT_data    00000001FFFBA000-00000001FFFFFFFF  0000000000000046 8000000000000009
 MemMapIO   00000FFFF8000000-00000FFFFBFFFFFF  0000000000004000 8000000000000001
 MemPortIO  00000FFFFC000000-00000FFFFFFFFFFF  0000000000004000 8000000000000001
   LoaderCode:      70 Pages (286,720)
   LoaderData:       8 Pages (32,768)
   BS_code   :   8,442 Pages (34,578,432)
   BS_data   :   1,488 Pages (6,094,848)
   RT_code   :   1,282 Pages (5,251,072)
   RT_data   :   4,376 Pages (17,924,096)
   available : 1,036,910 Pages (4,247,183,360)
   MemMapIO  :  20,480 Pages (83,886,080)
   MemPortIO :  16,384 Pages (67,108,864)
   PAL_code  :      64 Pages (262,144)
 Total Memory: 4,111 MB (4,311,613,440) Bytes
 fs1:\> 
 
 OK boot -h -v
 Entering /boot/kernel/kernel at 0xe000000004058000...
 Skipping memory chunk start 0x180000000
 Skipping memory chunk start 0x1feffe000
 Skipping memory chunk start 0x1ff801000
 Skipping memory chunk start 0x1ff886000
 Skipping memory chunk start 0x1ff9fe000
 Skipping memory chunk start 0x1ffdfe000
 Skipping memory chunk start 0x1ffe7e000
 ptc.e base=0x0, count1=1, count2=1, stride1=0x0, stride2=0x0
 Processor supports 24 Region ID bits
 Trying VHPT size 0x800000
 Putting VHPT at 0x800000
 Splitting [0x100000-0x4000000]
 GDB: no debug ports present
 KDB: debugger backends: ddb
 KDB: current backend: ddb
 Copyright (c) 1992-2004 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 	The Regents of the University of California. All rights reserved.
 FreeBSD 5.3-BETA7 #0: Sun Oct  3 07:16:23 UTC 2004
     root@pluto2.freebsd.org:/usr/obj/usr/src/sys/GENERIC
 UNWIND: table added: base=e000000004000000, start=e0000000048aafa8, end=e0000000048d4ab0
 Preloaded elf kernel "/boot/kernel/kernel" at 0xe000000005260000.
 Preloaded mfs_root "/boot/mfsroot" at 0xe0000000052600e0.
 CPU: Madison (1196.75-Mhz Itanium 2)
   Origin = "GenuineIntel"  Revision = 4
   Features = 0x1<LB>
 real memory  = 2106621952 (2009 MB)
 Physical memory chunk(s):
 0x00064000 - 0x00081fff, 122880 bytes (15 pages)
 0x00100000 - 0x007fffff, 7340032 bytes (896 pages)
 0x01000000 - 0x03ffffff, 50331648 bytes (6144 pages)
 0x05262000 - 0x0ff7ffff, 181526528 bytes (22159 pages)
 0x10000000 - 0x7bab3fff, 1806385152 bytes (220506 pages)
 0x7f980000 - 0x7f9fffff, 524288 bytes (64 pages)
 0x7fe96000 - 0x7ff21fff, 573440 bytes (70 pages)
 avail memory = 2033197056 (1939 MB)
 FPSWA Revision = 0x10012, Entry = 0xe0000001ffe60050
 Using ACPI2.0 table at 0x7ff83000
 Table 'FACP' at 0xe00000007ff83138
 Table 'APIC' at 0xe00000007ff83230
 	Local APIC address=0xfee00000
 	Local SAPIC entry
 		ProcessorId=0x0, Id=0xc0, Eid=0x18
 	Local SAPIC entry
 		ProcessorId=0x1, Id=0xc6, Eid=0x18
 	Local SAPIC entry
 		ProcessorId=0x2, Id=0xc2, Eid=0x18
 	Local SAPIC entry
 		ProcessorId=0x3, Id=0xc4, Eid=0x18
 	I/O SAPIC entry
 		Id=0x0, InterruptBase=0x0, Address=0xfec00000
 	I/O SAPIC entry
 		Id=0x1, InterruptBase=0x18, Address=0xfec10000
 	I/O SAPIC entry
 		Id=0x2, InterruptBase=0x30, Address=0xfec20000
 	I/O SAPIC entry
 		Id=0x3, InterruptBase=0x48, Address=0xfec30000
 	I/O SAPIC entry
 		Id=0x4, InterruptBase=0x60, Address=0xfec40000
 	I/O SAPIC entry
 		Id=0x5, InterruptBase=0x78, Address=0xfec50000
 	I/O SAPIC entry
 		Id=0x6, InterruptBase=0x90, Address=0xfec60000
 	Interrupt source override entry
 		Bus=0, Source=9, Irq=0x9
 	Platform interrupt entry
 		Polarity=3, TriggerMode=3, Id=0xc0, Eid=0x18, Vector=0x1e, Irq=22
 MCA: allocated 16384 bytes for state info.
 mem: <memory>
 null: <null device, zero device>
 random: <entropy source, Software, Yarrow>
 acpi0: <INTEL SR870BN4> on motherboard
 acpi0: [MPSAFE]
 AcpiOsDerivePciId: bus 255 dev 28 func 1
 AcpiOsDerivePciId: bus 255 dev 28 func 5
 AcpiOsDerivePciId: bus 3 dev 31 func 0
 AcpiOsDerivePciId: bus 255 dev 28 func 2
 AcpiOsDerivePciId: bus 255 dev 28 func 3
 AcpiOsDerivePciId: bus 12 dev 31 func 0
 AcpiOsDerivePciId: bus 255 dev 28 func 4
 acpi0: Power Button (fixed)
 ACPI timer looks GOOD min = 2, max = 3, width = 1
 ACPI timer looks GOOD min = 2, max = 3, width = 1
 ACPI timer looks GOOD min = 2, max = 3, width = 1
 ACPI timer looks GOOD min = 2, max = 3, width = 1
 ACPI timer looks GOOD min = 2, max = 3, width = 1
 ACPI timer looks GOOD min = 2, max = 3, width = 1
 ACPI timer looks GOOD min = 2, max = 3, width = 1
 ACPI timer looks GOOD min = 2, max = 3, width = 1
 ACPI timer looks GOOD min = 2, max = 3, width = 1
 ACPI timer looks GOOD min = 2, max = 3, width = 1
 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xc08-0xc0b on acpi0
 cpu0: <ACPI CPU> on acpi0
 pcib0: <ACPI Host-PCI bridge> on acpi0
 ACPI PCI link initial configuration:
 pci0: <ACPI PCI bus> on pcib0
 pci0: physical bus=0
 	map[20]: type 4, range 32, base 00004cc0, size  5, enabled
 pcib0: matched entry for 0.29.INTA
 pcib0: slot 29 INTA hardwired to IRQ 16
 found->	vendor=0x8086, dev=0x24c2, revid=0x02
 	bus=0, slot=29, func=0
 	class=0c-03-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=16
 	map[20]: type 4, range 32, base 00004ce0, size  5, enabled
 pcib0: matched entry for 0.29.INTB
 pcib0: slot 29 INTB hardwired to IRQ 19
 found->	vendor=0x8086, dev=0x24c4, revid=0x02
 	bus=0, slot=29, func=1
 	class=0c-03-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=b, irq=19
 	map[10]: type 1, range 32, base f9ff0000, size 10, enabled
 pcib0: matched entry for 0.29.INTD
 pcib0: slot 29 INTD hardwired to IRQ 23
 found->	vendor=0x8086, dev=0x24cd, revid=0x02
 	bus=0, slot=29, func=7
 	class=0c-03-20, hdrtype=0x00, mfdev=0
 	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=d, irq=23
 	powerspec 2  supports D0 D3  current D0
 found->	vendor=0x8086, dev=0x244e, revid=0x82
 	bus=0, slot=30, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0080, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x0f (3750 ns), maxlat=0x00 (0 ns)
 found->	vendor=0x8086, dev=0x24c0, revid=0x02
 	bus=0, slot=31, func=0
 	class=06-01-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x014f, statreg=0x0280, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	map[20]: type 4, range 32, base 00001000, size  4, enabled
 pcib0: no PRT entry for 0.31.INTA
 found->	vendor=0x8086, dev=0x24cb, revid=0x02
 	bus=0, slot=31, func=1
 	class=01-01-8a, hdrtype=0x00, mfdev=0
 	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=0
 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x4cc0-0x4cdf irq 16 at device 29.0 on pci0
 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4cc0
 uhci0: [GIANT-LOCKED]
 usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
 usb0: USB revision 1.0
 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x4ce0-0x4cff irq 19 at device 29.1 on pci0
 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4ce0
 uhci1: [GIANT-LOCKED]
 usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
 usb1: USB revision 1.0
 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 uhub2: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
 uhub2: 4 ports with 4 removable, self powered
 ukbd0: ATEN 4 Port USB KVM B V1.60, rev 1.10/1.00, addr 3, iclass 3/1
 kbd0: ukbd0, generic (0), config:0x0, flags:0x1d0000
 ums0: ATEN 4 Port USB KVM B V1.60, rev 1.10/1.00, addr 3, iclass 3/1
 ums0: 5 buttons and Z dir.
 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf9ff0000-0xf9ff03ff irq 23 at device 29.7 on pci0
 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf9ff0000
 ehci0: [GIANT-LOCKED]
 ehci_pci_attach: companion usb0
 ehci_pci_attach: companion usb1
 usb2: EHCI version 1.0
 usb2: companion controllers, 2 ports each: usb0 usb1
 usb2: <EHCI (generic) USB 2.0 controller> on ehci0
 usb2: USB revision 2.0
 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub3: 4 ports with 4 removable, self powered
 pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 pcib1:   secondary bus     1
 pcib1:   subordinate bus   1
 pcib1:   I/O decode        0x5000-0x5fff
 pcib1:   memory decode     0xfa000000-0xfbffffff
 pcib1:   prefetched decode 0xfff00000-0xfffff
 pcib1:   Subtractively decoded bridge.
 ACPI PCI link initial configuration:
 pci1: <ACPI PCI bus> on pcib1
 pci1: physical bus=1
 	map[10]: type 1, range 32, base fbfe0000, size 17, enabled
 pcib1: device (null) requested decoded memory range 0xfbfe0000-0xfbffffff
 	map[18]: type 4, range 32, base 00005cc0, size  6, enabled
 pcib1: device (null) requested decoded I/O range 0x5cc0-0x5cff
 pcib1: matched entry for 1.0.INTA
 pcib1: slot 0 INTA hardwired to IRQ 18
 found->	vendor=0x8086, dev=0x100e, revid=0x02
 	bus=1, slot=0, func=0
 	class=02-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0157, statreg=0x0230, cachelnsz=32 (dwords)
 	lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=18
 	powerspec 2  supports D0 D3  current D0
 	MSI supports 1 message, 64 bit
 	map[10]: type 1, range 32, base fa000000, size 24, enabled
 pcib1: device (null) requested decoded memory range 0xfa000000-0xfaffffff
 	map[14]: type 4, range 32, base 00005800, size  8, enabled
 pcib1: device (null) requested decoded I/O range 0x5800-0x58ff
 	map[18]: type 1, range 32, base fbfd0000, size 12, enabled
 pcib1: device (null) requested decoded memory range 0xfbfd0000-0xfbfd0fff
 found->	vendor=0x1002, dev=0x4752, revid=0x27
 	bus=1, slot=1, func=0
 	class=03-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0087, statreg=0x0290, cachelnsz=32 (dwords)
 	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
 	powerspec 2  supports D0 D1 D2 D3  current D0
 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0x5cc0-0x5cff mem 0xfbfe0000-0xfbffffff irq 18 at device 0.0 on pci1
 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfbfe0000
 em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0x5cc0
 em0: [MPSAFE]
 em0: bpf attached
 em0: Ethernet address: 00:07:e9:d8:14:91
 em0:  Speed:N/A  Duplex:N/A
 pci1: <display, VGA> at device 1.0 (no driver attached)
 pci0: <bridge, PCI-ISA> at device 31.0 (no driver attached)
 atapci0: <Intel ICH4 UDMA100 controller> port 0x1000-0x100f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 0 at device 31.1 on pci0
 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1000
 ata0: channel #0 on atapci0
 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
 ata0: reset tp1 mask=03 ostat0=50 ostat1=50
 ata0-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
 ata0-slave:  stat=0x00 err=0x01 lsb=0x14 msb=0xeb
 ata0: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
 ata0: [MPSAFE]
 ata1: channel #1 on atapci0
 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
 ata1: reset tp1 mask=03 ostat0=00 ostat1=00
 ata1-master: stat=0x01 err=0x01 lsb=0x01 msb=0x01
 ata1-slave:  stat=0x01 err=0x01 lsb=0x01 msb=0x01
 ata1: reset tp2 stat0=01 stat1=01 devices=0x0
 ata1: [MPSAFE]
 pcib2: <ACPI Host-PCI bridge> on acpi0
 pcib2: could not get PCI interrupt routing table for \_SB_.PCI1 - AE_NOT_FOUND
 pci2: <ACPI PCI bus> on pcib2
 pci2: physical bus=2
 	map[10]: type 1, range 32, base f1ff0000, size 12, enabled
 found->	vendor=0x8086, dev=0x1461, revid=0x04
 	bus=2, slot=28, func=0
 	class=08-00-20, hdrtype=0x00, mfdev=0
 	cmdreg=0x0146, statreg=0x0030, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 found->	vendor=0x8086, dev=0x1460, revid=0x04
 	bus=2, slot=29, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0030, cachelnsz=32 (dwords)
 	lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
 	map[10]: type 1, range 32, base f1fe0000, size 12, enabled
 found->	vendor=0x8086, dev=0x1461, revid=0x04
 	bus=2, slot=30, func=0
 	class=08-00-20, hdrtype=0x00, mfdev=0
 	cmdreg=0x0146, statreg=0x0030, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 found->	vendor=0x8086, dev=0x1460, revid=0x04
 	bus=2, slot=31, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0030, cachelnsz=32 (dwords)
 	lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
 pci2: <base peripheral, interrupt controller> at device 28.0 (no driver attached)
 pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci2
 pcib3:   secondary bus     3
 pcib3:   subordinate bus   5
 pcib3:   I/O decode        0x6000-0x7fff
 pcib3:   memory decode     0xf2000000-0xf5ffffff
 pcib3:   prefetched decode 0xe3f00000-0xebffffff
 ACPI PCI link initial configuration:
 pci3: <ACPI PCI bus> on pcib3
 pci3: physical bus=3
 	map[10]: type 3, range 64, base e3ff0000, size  8, enabled
 pcib3: device (null) requested decoded memory range 0xe3ff0000-0xe3ff00ff
 pcib3: matched entry for 3.31.INTA
 pcib3: slot 31 INTA hardwired to IRQ 71
 found->	vendor=0x8086, dev=0x1462, revid=0x04
 	bus=3, slot=31, func=0
 	class=08-04-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0146, statreg=0x0230, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=71
 pci3: <base peripheral> at device 31.0 (no driver attached)
 pci2: <base peripheral, interrupt controller> at device 30.0 (no driver attached)
 pcib4: <ACPI PCI-PCI bridge> at device 31.0 on pci2
 pcib4:   secondary bus     6
 pcib4:   subordinate bus   7
 pcib4:   I/O decode        0x8000-0x9fff
 pcib4:   memory decode     0xf6000000-0xf8ffffff
 pcib4:   prefetched decode 0xec000000-0xf0ffffff
 ACPI PCI link initial configuration:
 pci6: <ACPI PCI bus> on pcib4
 pci6: physical bus=6
 	map[10]: type 4, range 32, base 00008800, size  8, enabled
 pcib4: device (null) requested decoded I/O range 0x8800-0x88ff
 	map[14]: type 1, range 64, base f8fd0000, size 16, enabled
 pcib4: device (null) requested decoded memory range 0xf8fd0000-0xf8fdffff
 	map[1c]: type 1, range 64, base f8fc0000, size 16, enabled
 pcib4: device (null) requested decoded memory range 0xf8fc0000-0xf8fcffff
 pcib4: matched entry for 6.2.INTA
 pcib4: slot 2 INTA hardwired to IRQ 28
 found->	vendor=0x1000, dev=0x0030, revid=0x07
 	bus=6, slot=2, func=0
 	class=01-00-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0157, statreg=0x0230, cachelnsz=32 (dwords)
 	lattimer=0x40 (1920 ns), mingnt=0x11 (4250 ns), maxlat=0x12 (4500 ns)
 	intpin=a, irq=28
 	powerspec 2  supports D0 D1 D2 D3  current D0
 	MSI supports 1 message, 64 bit
 	map[10]: type 4, range 32, base 00008c00, size  8, enabled
 pcib4: device (null) requested decoded I/O range 0x8c00-0x8cff
 	map[14]: type 1, range 64, base f8ff0000, size 16, enabled
 pcib4: device (null) requested decoded memory range 0xf8ff0000-0xf8ffffff
 	map[1c]: type 1, range 64, base f8fe0000, size 16, enabled
 pcib4: device (null) requested decoded memory range 0xf8fe0000-0xf8feffff
 pcib4: matched entry for 6.2.INTB
 pcib4: slot 2 INTB hardwired to IRQ 29
 found->	vendor=0x1000, dev=0x0030, revid=0x07
 	bus=6, slot=2, func=1
 	class=01-00-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0157, statreg=0x0230, cachelnsz=32 (dwords)
 	lattimer=0x40 (1920 ns), mingnt=0x11 (4250 ns), maxlat=0x12 (4500 ns)
 	intpin=b, irq=29
 	powerspec 2  supports D0 D1 D2 D3  current D0
 	MSI supports 1 message, 64 bit
 	map[10]: type 3, range 64, base f0ff0000, size  8, enabled
 pcib4: device (null) requested decoded memory range 0xf0ff0000-0xf0ff00ff
 pcib4: matched entry for 6.31.INTA
 pcib4: slot 31 INTA hardwired to IRQ 47
 found->	vendor=0x8086, dev=0x1462, revid=0x04
 	bus=6, slot=31, func=0
 	class=08-04-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0146, statreg=0x0230, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=47
 mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x8800-0x88ff mem 0xf8fc0000-0xf8fcffff,0xf8fd0000-0xf8fdffff irq 28 at device 2.0 on pci6
 mpt0: Reserved 0x10000 bytes for rid 0x14 type 3 at 0xf8fd0000
 mpt0: [GIANT-LOCKED]
 mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x8c00-0x8cff mem 0xf8fe0000-0xf8feffff,0xf8ff0000-0xf8ffffff irq 29 at device 2.1 on pci6
 mpt1: linking with peer (mpt0)
 mpt1: Reserved 0x10000 bytes for rid 0x14 type 3 at 0xf8ff0000
 mpt1: [GIANT-LOCKED]
 pci6: <base peripheral> at device 31.0 (no driver attached)
 unknown: not probed (disabled)
 pcib5: <ACPI Host-PCI bridge> on acpi0
 pcib5: could not get PCI interrupt routing table for \_SB_.PCI3 - AE_NOT_FOUND
 pci9: <ACPI PCI bus> on pcib5
 pci9: physical bus=9
 	map[10]: type 1, range 32, base dbff0000, size 12, enabled
 found->	vendor=0x8086, dev=0x1461, revid=0x04
 	bus=9, slot=28, func=0
 	class=08-00-20, hdrtype=0x00, mfdev=0
 	cmdreg=0x0146, statreg=0x0030, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 found->	vendor=0x8086, dev=0x1460, revid=0x04
 	bus=9, slot=29, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0030, cachelnsz=32 (dwords)
 	lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
 	map[10]: type 1, range 32, base dbfe0000, size 12, enabled
 found->	vendor=0x8086, dev=0x1461, revid=0x04
 	bus=9, slot=30, func=0
 	class=08-00-20, hdrtype=0x00, mfdev=0
 	cmdreg=0x0146, statreg=0x0030, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 found->	vendor=0x8086, dev=0x1460, revid=0x04
 	bus=9, slot=31, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0030, cachelnsz=32 (dwords)
 	lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
 pci9: <base peripheral, interrupt controller> at device 28.0 (no driver attached)
 pcib6: <ACPI PCI-PCI bridge> at device 29.0 on pci9
 pcib6:   secondary bus     10
 pcib6:   subordinate bus   11
 pcib6:   I/O decode        0xa000-0xafff
 pcib6:   memory decode     0xdc000000-0xddffffff
 pcib6:   prefetched decode 0xcbf00000-0xcfffffff
 ACPI PCI link initial configuration:
 pci10: <ACPI PCI bus> on pcib6
 pci10: physical bus=10
 	map[10]: type 3, range 64, base cbff0000, size  8, enabled
 pcib6: device (null) requested decoded memory range 0xcbff0000-0xcbff00ff
 pcib6: matched entry for 10.31.INTA
 pcib6: slot 31 INTA hardwired to IRQ 119
 found->	vendor=0x8086, dev=0x1462, revid=0x04
 	bus=10, slot=31, func=0
 	class=08-04-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0146, statreg=0x0230, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=119
 pci10: <base peripheral> at device 31.0 (no driver attached)
 pci9: <base peripheral, interrupt controller> at device 30.0 (no driver attached)
 pcib7: <ACPI PCI-PCI bridge> at device 31.0 on pci9
 pcib7:   secondary bus     12
 pcib7:   subordinate bus   14
 pcib7:   I/O decode        0xb000-0xcfff
 pcib7:   memory decode     0xde000000-0xe2ffffff
 pcib7:   prefetched decode 0xd0000000-0xdaffffff
 ACPI PCI link initial configuration:
 pci12: <ACPI PCI bus> on pcib7
 pci12: physical bus=12
 	map[10]: type 3, range 64, base daff0000, size  8, enabled
 pcib7: device (null) requested decoded memory range 0xdaff0000-0xdaff00ff
 pcib7: matched entry for 12.31.INTA
 pcib7: slot 31 INTA hardwired to IRQ 95
 found->	vendor=0x8086, dev=0x1462, revid=0x04
 	bus=12, slot=31, func=0
 	class=08-04-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0146, statreg=0x0230, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=95
 pci12: <base peripheral> at device 31.0 (no driver attached)
 pcib8: <ACPI Host-PCI bridge> on acpi0
 pcib8: could not get PCI interrupt routing table for \_SB_.PCI4 - AE_NOT_FOUND
 pci15: <ACPI PCI bus> on pcib8
 pci15: physical bus=15
 	map[10]: type 1, range 32, base c5ff0000, size 12, enabled
 found->	vendor=0x8086, dev=0x1461, revid=0x04
 	bus=15, slot=28, func=0
 	class=08-00-20, hdrtype=0x00, mfdev=0
 	cmdreg=0x0146, statreg=0x0030, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 found->	vendor=0x8086, dev=0x1460, revid=0x04
 	bus=15, slot=29, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0030, cachelnsz=32 (dwords)
 	lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
 	map[10]: type 1, range 32, base c5fe0000, size 12, enabled
 found->	vendor=0x8086, dev=0x1461, revid=0x04
 	bus=15, slot=30, func=0
 	class=08-00-20, hdrtype=0x00, mfdev=0
 	cmdreg=0x0146, statreg=0x0030, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 found->	vendor=0x8086, dev=0x1460, revid=0x04
 	bus=15, slot=31, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0147, statreg=0x0030, cachelnsz=32 (dwords)
 	lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
 pci15: <base peripheral, interrupt controller> at device 28.0 (no driver attached)
 pcib9: <ACPI PCI-PCI bridge> at device 29.0 on pci15
 pcib9:   secondary bus     16
 pcib9:   subordinate bus   17
 pcib9:   I/O decode        0xd000-0xdfff
 pcib9:   memory decode     0xc6000000-0xc7ffffff
 pcib9:   prefetched decode 0xbbf00000-0xbfffffff
 ACPI PCI link initial configuration:
 pci16: <ACPI PCI bus> on pcib9
 pci16: physical bus=16
 	map[10]: type 3, range 64, base bbff0000, size  8, enabled
 pcib9: device (null) requested decoded memory range 0xbbff0000-0xbbff00ff
 pcib9: matched entry for 16.31.INTA
 pcib9: slot 31 INTA hardwired to IRQ 167
 found->	vendor=0x8086, dev=0x1462, revid=0x04
 	bus=16, slot=31, func=0
 	class=08-04-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0146, statreg=0x0230, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=167
 pci16: <base peripheral> at device 31.0 (no driver attached)
 pci15: <base peripheral, interrupt controller> at device 30.0 (no driver attached)
 pcib10: <ACPI PCI-PCI bridge> at device 31.0 on pci15
 pcib10:   secondary bus     18
 pcib10:   subordinate bus   19
 pcib10:   I/O decode        0xe000-0xefff
 pcib10:   memory decode     0xc8000000-0xcaffffff
 pcib10:   prefetched decode 0xc0000000-0xc4ffffff
 ACPI PCI link initial configuration:
 pci18: <ACPI PCI bus> on pcib10
 pci18: physical bus=18
 	map[10]: type 3, range 64, base c4ff0000, size  8, enabled
 pcib10: device (null) requested decoded memory range 0xc4ff0000-0xc4ff00ff
 pcib10: matched entry for 18.31.INTA
 pcib10: slot 31 INTA hardwired to IRQ 143
 found->	vendor=0x8086, dev=0x1462, revid=0x04
 	bus=18, slot=31, func=0
 	class=08-04-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0146, statreg=0x0230, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=143
 pci18: <base peripheral> at device 31.0 (no driver attached)
 unknown: not probed (disabled)
 unknown: not probed (disabled)
 unknown: not probed (disabled)
 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 on acpi0
 uart0: fast interrupt
 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
 uart1: fast interrupt
 uart1: console (57600,n,8,1)
 unknown: not probed (disabled)
 unknown: not probed (disabled)
 unknown: not probed (disabled)
 unknown: not probed (disabled)
 procfs registered
 Timecounter "ITC" frequency 1196754000 Hz quality 0
 Timecounters tick every 10.000 msec
 lo0: bpf attached
 md0: Preloaded image </boot/mfsroot> 8388608 bytes at 0xe000000004a5cf30
 ata0-slave: pio=0x0c wdma=0x22 udma=0xffffffff cable=80pin
 GEOM: Configure md0a, start 8192 length 8380416 end 8388607
 GEOM: Configure md0c, start 0 length 8388608 end 8388607
 ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
 ata0-master: setting PIO4 on Intel ICH4 chip
 ata0-master: setting UDMA33 on Intel ICH4 chip
 ata0-slave: setting PIO4 on Intel ICH4 chip
 acd0: <MATSHITADVD-ROM SR-8176/MZ31> DVDROM drive at ata0 as master
 acd0: read 4125KB/s (4125KB/s), 256KB buffer, UDMA33
 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
 acd0: Writes:
 acd0: Audio: play, 255 volume levels
 acd0: Mechanism: ejectable tray, unlocked
 acd0: Medium: CD-ROM 120mm data disc
 afd0: <LS-120/240 00 UHD Floppy/H045MA40> removable drive at ata0 as slave
 afd0: 229MB (469504 sectors), 262 cyls, 32 heads, 56 S/T, 512 B/S
 afd0: 2995KB/s, PIO4
 Waiting 5 seconds for SCSI devices to settle
 GEOM: new disk afd0
 uhub2: at uhub1 port 1 (addr 2) disconnected
 ukbd0: at uhub2 port 1 (addr 3) disconnected
 ukbd0: detached
 ums0: at uhub2 port 1 (addr 3) disconnected
 ums0: detached
 uhub2: detached
 uhub2: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
 uhub2: 4 ports with 4 removable, self powered
 ukbd0: ATEN 4 Port USB KVM B V1.60, rev 1.10/1.00, addr 3, iclass 3/1
 kbd0: ukbd0, generic (0), config:0x0, flags:0x1d0000
 ums0: ATEN 4 Port USB KVM B V1.60, rev 1.10/1.00, addr 3, iclass 3/1
 ums0: 5 buttons and Z dir.
 (probe15:mpt1:0:0:0): error 22
 (probe15:mpt1:0:0:0): Unretryable Error
 (probe1:mpt0:0:1:0): error 22
 (probe1:mpt0:0:1:0): Unretryable Error
 (probe16:mpt1:0:1:0): error 22
 (probe16:mpt1:0:1:0): Unretryable Error
 (probe2:mpt0:0:2:0): error 22
 (probe2:mpt0:0:2:0): Unretryable Error
 (probe17:mpt1:0:2:0): error 22
 (probe17:mpt1:0:2:0): Unretryable Error
 (probe3:mpt0:0:3:0): error 22
 (probe3:mpt0:0:3:0): Unretryable Error
 (probe18:mpt1:0:3:0): error 22
 (probe18:mpt1:0:3:0): Unretryable Error
 (probe4:mpt0:0:4:0): error 22
 (probe4:mpt0:0:4:0): Unretryable Error
 (probe19:mpt1:0:4:0): error 22
 (probe19:mpt1:0:4:0): Unretryable Error
 (probe5:mpt0:0:5:0): error 22
 (probe5:mpt0:0:5:0): Unretryable Error
 (probe20:mpt1:0:5:0): error 22
 (probe20:mpt1:0:5:0): Unretryable Error
 (probe7:mpt0:0:8:0): error 22
 (probe7:mpt0:0:8:0): Unretryable Error
 (probe21:mpt1:0:6:0): error 22
 (probe21:mpt1:0:6:0): Unretryable Error
 (probe8:mpt0:0:9:0): error 22
 (probe8:mpt0:0:9:0): Unretryable Error
 (probe22:mpt1:0:8:0): error 22
 (probe22:mpt1:0:8:0): Unretryable Error
 (probe9:mpt0:0:10:0): error 22
 (probe9:mpt0:0:10:0): Unretryable Error
 (probe23:mpt1:0:9:0): error 22
 (probe23:mpt1:0:9:0): Unretryable Error
 (probe10:mpt0:0:11:0): error 22
 (probe10:mpt0:0:11:0): Unretryable Error
 (probe24:mpt1:0:10:0): error 22
 (probe24:mpt1:0:10:0): Unretryable Error
 (probe11:mpt0:0:12:0): error 22
 (probe11:mpt0:0:12:0): Unretryable Error
 (probe25:mpt1:0:11:0): error 22
 (probe25:mpt1:0:11:0): Unretryable Error
 (probe12:mpt0:0:13:0): error 22
 (probe12:mpt0:0:13:0): Unretryable Error
 (probe26:mpt1:0:12:0): error 22
 (probe26:mpt1:0:12:0): Unretryable Error
 (probe13:mpt0:0:14:0): error 22
 (probe13:mpt0:0:14:0): Unretryable Error
 (probe27:mpt1:0:13:0): error 22
 (probe27:mpt1:0:13:0): Unretryable Error
 (probe14:mpt0:0:15:0): error 22
 (probe14:mpt0:0:15:0): Unretryable Error
 (probe0:mpt0:0:0:0): Retrying Command
 (probe28:mpt1:0:14:0): error 22
 (probe28:mpt1:0:14:0): Unretryable Error
 (probe29:mpt1:0:15:0): error 22
 (probe29:mpt1:0:15:0): Unretryable Error
 pass0 at mpt0 bus 0 target 0 lun 0
 pass0: <QUANTUM QM39100TD-SCA N1K0> Fixed Direct Access SCSI-2 device 
 pass0: Serial Number PCB=20-116002-05; HDA=329905851953
 pass0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
 pass1 at mpt0 bus 0 target 6 lun 0
 pass1: <ESG-SHV SCA HSBP M17 1.03> Fixed Processor SCSI-2 device 
 pass1: Serial Number 1
 pass1: 3.300MB/s transfers
 ses0 at mpt0 bus 0 target 6 lun 0
 ses0: <ESG-SHV SCA HSBP M17 1.03> Fixed Processor SCSI-2 device 
 ses0: Serial Number 1
 ses0: 3.300MB/s transfers
 ses0: SAF-TE Compliant Device
 GEOM: new disk da0
 da0 at mpt0 bus 0 target 0 lun 0
 da0: <QUANTUM QM39100TD-SCA N1K0> Fixed Direct Access SCSI-2 device 
 da0: Serial Number PCB=20-116002-05; HDA=329905851953
 da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
 da0: 8683MB (17783249 512 byte sectors: 255H 63S/T 1106C)
 [0] f:00 typ:11 s(CHS):0/1/1 e(CHS):12/254/63 s:63 l:208782
 [1] f:80 typ:3 s(CHS):13/0/1 e(CHS):38/254/63 s:208845 l:417690
 [2] f:00 typ:130 s(CHS):852/0/1 e(CHS):1023/254/63 s:13687380 l:4080510
 [3] f:00 typ:131 s(CHS):39/0/1 e(CHS):851/254/63 s:626535 l:13060845
 GEOM: Configure da0s1, start 32256 length 106896384 end 106928639
 GEOM: Configure da0s2, start 106928640 length 213857280 end 320785919
 GEOM: Configure da0s3, start 7007938560 length 2089221120 end 9097159679
 GEOM: Configure da0s4, start 320785920 length 6687152640 end 7007938559
 Mounting root from ufs:/dev/md0
 WARNING: clock gained 15 days -- CHECK AND RESET THE DATE!
 start_init: trying /sbin/init
 start_init: trying /sbin/oinit
 start_init: trying /sbin/init.bak
 start_init: trying /stand/sysinstall
 /stand/sysinstall running as init on serial console
 These are the predefined terminal types available to
 sysinstall when running stand-alone.  Please choose the
 closest match for your particular terminal.
 1 ...................... Standard ANSI terminal.
 2 ...................... VT100 or compatible terminal.
 3 ...................... FreeBSD system console (color).
 4 ...................... FreeBSD system console (monochrome).
 5 ...................... xterm terminal emulator.
 Your choice: (1-5) 
 
 --------------010800020801000604010405
 Content-Type: text/plain; charset="us-ascii"
 MIME-Version: 1.0
 Content-Transfer-Encoding: 7bit
 Content-Disposition: inline
 
 _______________________________________________
 freebsd-bugs@freebsd.org mailing list
 http://lists.freebsd.org/mailman/listinfo/freebsd-bugs
 To unsubscribe, send any mail to "freebsd-bugs-unsubscribe@freebsd.org"
 
 --------------010800020801000604010405--
 



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200507030110.j631Ar20020536>