Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 13 Dec 2006 17:11:34 +0900
From:      Pyun YongHyeon <pyunyh@gmail.com>
To:        Andre Guibert de Bruet <andy@siliconlandmark.com>
Cc:        freebsd-current@freebsd.org
Subject:   Re: Call for Marvell/SysKonnect Yukon II Gigabit Ethernet testers.
Message-ID:  <20061213081134.GB13506@cdnetworks.co.kr>
In-Reply-To: <20061213023325.P56950@lexi.siliconlandmark.com>
References:  <20060926002916.GA5975@cdnetworks.co.kr> <ekikdg$aqu$1@sea.gmane.org> <20061129013052.GC71523@cdnetworks.co.kr> <457DF011.9010701@FreeBSD.org> <20061212020023.GA9698@cdnetworks.co.kr> <6BC2A5CB-AC24-4EB3-8C6C-A4D0A5EA7183@siliconlandmark.com> <20061212124428.GB9698@cdnetworks.co.kr> <20061213023325.P56950@lexi.siliconlandmark.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Dec 13, 2006 at 02:35:43AM -0500, Andre Guibert de Bruet wrote:

[...]
 > 
 > Sorry for the late reply. This is the output, including your latest 
 > round of changes (As committed):
 > 
 > dmesg:
 > 
 > mskc0: <Marvell Yukon 88E8050 Gigabit Ethernet> port 0xd800-0xd8ff mem 
 > 0xfcffc000-0xfcffffff irq 16 at device 0.0 on pci6
 > mskc0: [FAST]
 > msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x01> on mskc0
 > msk0: Ethernet address: 00:04:23:b0:d2:cf
 > miibus0: <MII bus> on msk0
 > ukphy0: <Generic IEEE 802.3u media interface> on miibus0
   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 > ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
 > 1000baseT-FDX, auto
 > 

Hmm, it seems that e1000phy(4) failed to attach your PHY.
I'd like to know your PHY model/revision number.(You can set
bootverbose option and ukphy(4) will show OUI/model/revision
for your PHY.) With ukphy(4) you wouldn't get auto-crossover
feature or manual media selection work.

 > ifconfig:
 > 
 > msk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
 > 	options=19a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4>
 > 	inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
 > 	ether 00:04:23:b0:d2:cf
 > 	media: Ethernet autoselect (1000baseTX <full-duplex>)
 > 	status: active
 > 
 > pciconf -vl
 > 
 > mskc0@pci6:0:0: class=0x020000 card=0x50218086 chip=0x436111ab rev=0x17 
 > hdr=0x00
 > 
 >     vendor   = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
 >     device   = '88E8036 Marvell Yukon -EC 88E8036 PCI Express Fast Ethernet 
 >     Controller'
 >     class    = network
 >     subclass = ethernet
 > 
 > Thanks again! :)
 > 
 > Andy
 > 
 > /*  Andre Guibert de Bruet  * 6f43 6564 7020 656f 2e74 4220 7469 6a20 */
 > /*   Code poet / Sysadmin   * 636f 656b 2e79 5320 7379 6461 696d 2e6e */
 > /*   GSM: +1 734 846 8758   * 5520 494e 2058 6c73 7565 6874 002e 0000 */
 > /* WWW: siliconlandmark.com *      Tormenting bytes since 1980.       */
 > 

-- 
Regards,
Pyun YongHyeon



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061213081134.GB13506>