Date: Mon, 29 Dec 2003 16:31:20 -0800 (PST) From: Mark Terribile <materribile@yahoo.com> To: freebsd-questions@freebsd.org Subject: Target-mode drivers (/dev/targ) under 5.2 for ISP driver: no /dev/targ0 Message-ID: <20031230003120.39934.qmail@web21105.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
Hi,
I'm trying to bring up the target-mode interface on a QLogic 2300 FC
card. I have Matt Jacob's latest version of the driver, I have these
lines in my config file for the kernel:
options ISP_TARGET_MODE
device isp # Qlogic family
device ispfw # Qlogic firmware
The card does come up. The console messages include:
isp0: <Qlogic ISP 2300 PCI FC-AL Adaptor> port 0xde00-0xdeff mem
0xfe9fd0000-0xfe9dfff irq 9 at device 6.0 on pci 1
(My apologies, but the quickest way to get this into the email is to copy
it by hand, so I may have an error in there.)
The opt_isp.h file is generated; it contains
#define ISP_TARGET_MODE 1
At present, the FC card is unconnected.
I do have a second SCSI card -- an Adaptec 29160 Ultra 160 -- which is
ending up at 0xdd00-0xddff and 0xfe9fc000-0xfe9fcfff . It's running
fine, so far as I can tell.
With the SCSI devices, I have
device scbus # ... [excuse me, I'm not typing the comments here]
device ch # ...
device da # ...
device sa # ...
device cd # ...
device targ # ...
device targbh # ...
device pass # ...
device ses # ...
camcontrol devlist -v produces the following:
scbus0 on ahc0 bus0:
<BNCHMARK DLT1 5538> at scbus0 target 6 lun 0 (sa0, pass0)
< > at scbus0 target -1 lun -1 ()
scbus1 on isp0 bus0:
< > at scbus1 target -1 lun -1 (targbh0)
scbus-1 on xpt0 bus 0:
< > at scbus-1 target -1 lun -1 (xpt0)
What I do not have is /dev/targ0, /dev/targ1, etc. They are simply not
being created. This is 5.2, so they should just be there, no? I will be
grateful for any help you can give me in finding out why, and getting them
started.
Mark Terribile
materribile@yahoo.com
__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031230003120.39934.qmail>