Date: Thu, 04 May 2006 23:00:47 -0400 From: Understudy <understudy@understudy.net> To: openoffice@FreeBSD.org Subject: port not building properly Message-ID: <445ABFDF.5060406@understudy.net>
next in thread | raw e-mail | index | archive | help
Hi, I am having an issue trying to use portupgrade to upgrade openoffice. Below is the information I think is relevant to help. If you could point me in the right direction I would appreciate it. I have cleaned out the work directories mulitple times and started over. I have downloaded the tarball twice and it still hates me. I see in freshports.org that it breaks on 6.1, so I don't know if this related. If it is just let me know. Here is the dmesg: FreeBSD 6.0-STABLE #0: Sun Dec 25 15:37:20 EST 2005 root@Harlan.bjh.homenet:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2394.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4400<CNTX-ID,<b14>> Hyperthreading: 2 logical CPUs real memory = 1601634304 (1527 MB) avail memory = 1560387584 (1488 MB) ACPI APIC Table: <DELL GX270 > ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL GX270 > on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 00-0xefffffff,0xfeb80000-0xfebfffff irq 16 at device 2.0 on pci0 agp0: detected 892k stolen memory agp0: aperture size is 128M device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered evice 29.7 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <EHCI (generic) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered umass0: IOMEGA Desktop Hard Drive , rev 2.00/0.01, addr 2 pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib1 mem 0xfeae0000-0xfeafffff irq 18 at device 12.0 on pci1 em0: Ethernet address: 00:0d:56:ca:6e:3f isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 6,0xffa0-0xffaf mem 0xfeb7fc00-0xfeb7ffff irq 18 at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 -0xfe27,0xfe30-0xfe33,0xfea0-0xfeaf irq 18 at device 31.2 on pci0 atapci1: failed to enable memory mapping! ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse Explorer, device ID 4 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xca800-0xcbfff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2394008500 Hz quality 800 Timecounters tick every 1.000 msec ad0: 39205MB <Maxtor 6E040L0 NAR61590> at ata0-master UDMA100 acd0: DVDROM <HL-DT-STDVD-ROM GDR8162B/0015> at ata1-master UDMA33 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <WDC WD80 0BB-22JHA0 05.0> Fixed Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 76319MB (156301489 512 byte sectors: 255H 63S/T 9729C) Trying to mount root from ufs:/dev/ad0s1a pid 25021 (conftest), uid 0: exited on signal 11 (core dumped) Upgrading 'openoffice.org-1.1.5_1' to 'openoffice.org-1.1.5_2' Here is the last section with the error: gcc33 -O -Wl,-rpath,'$ORIGIN' -o genrb errmsg.o genrb.o parse.o read.o reslist.o ustr.o util.o wrtjava.o rle.o -L../../i18n -licui18n -L../../tools/toolutil -licutoolutil -L../../common -licuuc -L../../data/out -L../../stubdata -licudata -lpthread -lm ../../i18n/libicui18n.so: undefined reference to `vtable for __cxxabiv1::__class_type_info@GLIBCPP_3.2' ../../i18n/libicui18n.so: undefined reference to `vtable for __cxxabiv1::__vmi_class_type_info@GLIBCPP_3.2' ../../i18n/libicui18n.so: undefined reference to `__gxx_personality_v0@CXXABI_1.2' ../../i18n/libicui18n.so: undefined reference to `vtable for __cxxabiv1::__si_class_type_info@GLIBCPP_3.2' ../../i18n/libicui18n.so: undefined reference to `__cxa_pure_virtual@CXXABI_1.2' collect2: ld returned 1 exit status gmake[2]: *** [genrb] Error 1 gmake[2]: Leaving directory `/storage/ports/editors/openoffice.org-1.1/work/OOo_1.1.5/icu/unxfbsd.pro/misc/build/icu/source/tools/genrb' gmake[1]: *** [all-recursive] Error 2 gmake[1]: Leaving directory `/storage/ports/editors/openoffice.org-1.1/work/OOo_1.1.5/icu/unxfbsd.pro/misc/build/icu/source/tools' gmake: *** [all-recursive] Error 2 dmake: Error code 2, while making './unxfbsd.pro/misc/build/so_built_so_icu' ---* TG_SLO.MK *--- ERROR: Error 65280 occurred while making /storage/ports/editors/openoffice.org-1.1/work/OOo_1.1.5/icu dmake: Error code 1, while making 'build_all' ---* TG_SLO.MK *--- *** Error code 255 Stop in /storage/ports/editors/openoffice.org-1.1. ** Command failed [exit code 1]: /usr/bin/script -qa /tmp/portupgrade6636.0 make ** Fix the problem and try again. ** Listing the failed packages (*:skipped / !:failed) ! editors/openoffice.org-1.1 (openoffice.org-1.1.5_1) (linker error) ---> Packages processed: 0 done, 0 ignored, 0 skipped and 1 failed If you need more information let me know. Sincerely, Brendhan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?445ABFDF.5060406>