Date: Sun, 2 Dec 2001 13:05:08 -0800 (PST) From: Pete Carah <pete@ns.altadena.net> To: sos@freebsd.org, hackers@freebsd.org Subject: Via 686b data corruption. Message-ID: <200112022105.fB2L58F22980@ns.altadena.net>
next in thread | raw e-mail | index | archive | help
I'm seeing data corruption on the Promise channel of a A7V133,
WITH the "southbridge fix" applied and NO sound card of any kind in
the system (the built-in is disabled in the bios; current wouldn't boot
at all with it enabled, when I bought the mb). All the cards are
video (a TNT2 card of some kind) and network (Intel).
OS is -current of about a week ago:
FreeBSD 5.0-CURRENT #0: Sun Nov 25 18:11:17 PST 2001
with the cvsup done about 3 or so hours earlier...
I haven't updated the bios yet; the latest appears to be avu1007 from
the tw ftp site.
I have slowed the clock to 125mhz but from the "nature of the bug"
discussions it appears that shouldn't matter.
-- Pete
dmesg from boot verbose (booted last night):
--------------------------------------------
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Sun Nov 25 18:11:17 PST 2001
pete@seagull.altadena.net:/usr/src/sys/i386/compile/SEAGULL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc041a000.
Preloaded elf module "/boot/kernel/random.ko" at 0xc041a0a8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc041a154.
Calibrating clock(s) ... TSC clock: 1125127471 Hz, i8254 clock: 1193234 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 1125087368 Hz
CPU: AMD Athlon(tm) Processor (1125.09-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
Data TLB: 24 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 805224448 (786352K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009dfff, 643072 bytes (157 pages)
0x00441000 - 0x2ffe3fff, 800731136 bytes (195491 pages)
avail memory = 778739712 (760488K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f92a0
bios32: Entry = 0xf0f50 (c00f0f50) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x1150
pnpbios: Found PnP BIOS data at 0xc00fc2b0
pnpbios: Entry = f0000:c2e0 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
random: <entropy source>
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03051106)
Using $PIR table, 9 entries at 0xc00f1720
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS A7V-133 > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: physical bus=0
map[10]: type 3, range 32, base e6000000, size 25, enabled
found-> vendor=0x1106, dev=0x0305, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x8305, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x1106, dev=0x0686, revid=0x40
bus=0, slot=4, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000d800, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=4, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000d400, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x16
bus=0, slot=4, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=5
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000d000, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x16
bus=0, slot=4, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=5
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x3057, revid=0x40
bus=0, slot=4, func=4
class=06-00-00, hdrtype=0x00, mfdev=0
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base e1800000, size 12, enabled
map[14]: type 4, range 32, base 0000a400, size 6, enabled
map[18]: type 1, range 32, base e1000000, size 20, enabled
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000a000, size 3, enabled
map[14]: type 4, range 32, base 00009800, size 2, enabled
map[18]: type 4, range 32, base 00009400, size 3, enabled
map[1c]: type 4, range 32, base 00009000, size 2, enabled
map[20]: type 4, range 32, base 00008800, size 6, enabled
map[24]: type 1, range 32, base e0800000, size 17, enabled
found-> vendor=0x105a, dev=0x0d30, revid=0x02
bus=0, slot=17, func=0
class=01-80-00, hdrtype=0x00, mfdev=0
intpin=a, irq=10
powerspec 1 supports D0 D3 current D0
pci0: <PCI bus> on acpi_pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xdfff
pcib1: memory decode 0xe2000000-0xe3cfffff
pcib1: prefetched decode 0xe3f00000-0xe5ffffff
pci1: physical bus=1
map[10]: type 1, range 32, base e2000000, size 24, enabled
map[14]: type 3, range 32, base e4000000, size 25, enabled
found-> vendor=0x10de, dev=0x002d, revid=0x15
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd800-0xd80f at device 4.1 on pci0
atapci0: VIA '686b southbridge fix applied
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd800
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe 00 00
ata0-slave: ATAPI probe 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA probe 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd808
ata1: mask=01 ostat0=50 ostat2=ff
ata1-master: ATAPI probe 14 eb
ata1: mask=01 stat0=00 stat1=ff
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 5 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 5 at device 4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xa400-0xa43f mem 0xe1000000-0xe10fffff,0xe1800000-0xe1800fff irq 5 at device 9.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:02:b3:04:16:c4
fxp0: PCI IDs: 8086 1229 8086 000c 0008
fxp0: Dynamic Standby mode is disabled
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
atapci1: <Promise ATA100 controller> port 0x8800-0x883f,0x9000-0x9003,0x9400-0x9407,0x9800-0x9803,0xa000-0xa007 mem 0xe0800000-0xe081ffff irq 10 at device 17.0 on pci0
ata2: iobase=0xa000 altiobase=0x9802 bmaddr=0x8800
ata2: mask=03 ostat0=50 ostat2=50
ata2-master: ATAPI probe 00 00
ata2-slave: ATAPI probe 00 00
ata2: mask=03 stat0=50 stat1=50
ata2-master: ATA probe 01 a5
ata2-slave: ATA probe 01 a5
ata2: devices=03
ata2: at 0xa000 on atapci1
ata3: iobase=0x9400 altiobase=0x9002 bmaddr=0x8808
ata3: mask=03 ostat0=64 ostat2=64
ata3-master: ATAPI probe 64 64
ata3-slave: ATAPI probe 64 64
ata3: mask=03 stat0=64 stat1=64
ata3-master: ATA probe 25 25
ata3-slave: ATA probe 25 25
ata3: devices=00
ata3: at 0x9400 on atapci1
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
unknown: not probed (disabled)
unknown: not probed (disabled)
ata-: ata0 already exists, skipping it
ata-: ata1 already exists, skipping it
atkbdc-: atkbdc0 already exists, skipping it
ppc-: ppc0 already exists, skipping it
sio-: sio0 already exists, skipping it
sio-: sio1 already exists, skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc-: sc0 already exists, skipping it
vga-: vga0 already exists, skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xcc000-0xcdfff,0xd0000-0xd0fff on isa0
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
bt0 failed to probe on isa0
cs0 failed to probe at port 0x300 on isa0
ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0
fdc0: cannot reserve I/O port range (6 ports)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0 failed to probe at port 0x300 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
pmtimer0 failed to probe on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <12 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0 failed to probe at port 0x300 irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03ff0f3f 0..1023=1024 cylinders, 0..15=16 heads, 1..63=63 sectors
1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
2:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
IPv6 packet filtering initialized, unlimited logging
bpf: lo0 attached
IPFW: MOD_LOAD
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging
acpi_cpu0: set speed to 100.0%
acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
ad0: success setting UDMA4 on VIA chip
Creating DISK ad0
ad0: <Maxtor 92049U6/RA530JN0> ATA-5 disk at ata0-master
ad0: 19544MB (40026672 sectors), 39709 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ad4: success setting UDMA4 on Promise chip
Creating DISK ad4
Promise check1 failed
ad4: <Maxtor 94098U8/FA500860> ATA-5 disk at ata2-master
ad4: 39082MB (80041248 sectors), 79406 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA66
ad4: piomode=4 dmamode=2 udmamode=4 cblid=1
ad5: success setting UDMA4 on Promise chip
Creating DISK ad5
Promise check1 failed
ad5: <Maxtor 94098U8/FA500S60> ATA-5 disk at ata2-slave
ad5: 39082MB (80041248 sectors), 79406 C, 16 H, 63 S, 512 B
ad5: 16 secs/int, 1 depth queue, UDMA66
ad5: piomode=4 dmamode=2 udmamode=4 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <PLEXTOR CD-R PX-W8432T/1.00> CD-RW drive at ata1 as master
acd0: read 5512KB/s (3271KB/s) write 1377KB/s (1377KB/s), 2048KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes: CD-R, CD-RW, test write
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM unknown
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
start_init: trying /sbin/init
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
ad4s1: type 0xa5, start 63, end = 80035829, size 80035767 : OK
ad5s1: type 0xa5, start 63, end = 80035829, size 80035767 : OK
ad0s1: type 0xa5, start 63, end = 40026671, size 40026609 : OK
---------------------------------------------------------------
Output from X -probeonly (I'm not running X when the corruption
happens; only the snake saver in text mode). This is only to
identify the video card if needed.
----------------------------------
XFree86 Version 4.1.0 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: FreeBSD 5.0-20010531-CURRENT i386 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Dec 2 13:01:49 2001
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 12
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) NVidia Riva Ultra 64 rev 21, Mem @ 0xe2000000/24, 0xe4000000/25, BIOS @ 0xe3ff0000/16
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.13.0
(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
(II) Module nv: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) NV: driver for NVIDIA chipsets: RIVA128, RIVATNT, RIVATNT2,
RIVATNT2 (A), RIVATNT2 (B), RIVATNT2 (Ultra), RIVATNT2 (Vanta),
RIVATNT2 M64, RIVATNT2 (Integrated), GeForce 256, GeForce DDR,
Quadro, GeForce2 GTS, GeForce2 GTS (rev 1), GeForce2 ultra,
Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR, Quadro 2 MXR,
GeForce 2 Go, GeForce3, GeForce3 (rev 1), GeForce3 (rev 2),
GeForce3 (rev 3)
(--) Chipset RIVATNT2 M64 found
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) NV(0): Initializing int10
(==) NV(0): Write-combining range (0xa0000,0x20000) was already clear
(==) NV(0): Write-combining range (0xf0000,0x10000)
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "RIVATNT2 M64"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xE4000000
(--) NV(0): MMIO registers at 0xE2000000
(==) NV(0): Write-combining range (0xe2710000,0x10000) was already clear
(==) NV(0): Write-combining range (0xe2600000,0x1000) was already clear
(==) NV(0): Write-combining range (0xe2680000,0x1000) was already clear
(==) NV(0): Write-combining range (0xe2100000,0x1000) was already clear
(==) NV(0): Write-combining range (0xe2002000,0x2000) was already clear
(==) NV(0): Write-combining range (0xe2400000,0x2000) was already clear
(==) NV(0): Write-combining range (0xe2101000,0x1000) was already clear
(==) NV(0): Write-combining range (0xe2009000,0x1000) was already clear
(==) NV(0): Write-combining range (0xe2000000,0x9000) was already clear
(==) NV(0): Write-combining range (0xe2800000,0x10000) was already clear
(==) NV(0): Write-combining range (0xe2601000,0x1000) was already clear
(==) NV(0): Write-combining range (0xe2681000,0x1000) was already clear
(==) NV(0): Write-combining range (0xe20c0000,0x1000) was already clear
(--) NV(0): VideoRAM: 32768 kBytes
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(==) NV(0): Write-combining range (0xa0000,0x10000) was already clear
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.2.0
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): I2C device "DDC:ddc2" registered.
(II) NV(0): I2C device "DDC:ddc2" removed.
(==) NV(0): Write-combining range (0xa0000,0x10000) was already clear
(**) NV(0): Using gamma correction (1.8, 1.8, 1.8)
(II) NV(0): Monitor0: Using hsync range of 31.50-79.00 kHz
(II) NV(0): Monitor0: Using vrefresh range of 50.00-100.00 Hz
(II) NV(0): Clock range: 12.00 to 350.00 MHz
(II) NV(0): Not using default mode "1280x960" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "1400x1050" (hsync out of range)
(--) NV(0): Virtual size is 1280x1024 (pitch 1280)
(**) NV(0): Mode "1280x1024": 135.0 MHz, 78.9 kHz, 71.7 Hz
(**) NV(0): Mode "1152x864": 135.0 MHz, 76.0 kHz, 83.7 Hz
(**) NV(0): Mode "1024x768": 98.9 MHz, 70.2 kHz, 85.5 Hz
(**) NV(0): Mode "800x600": 50.1 MHz, 48.2 kHz, 72.4 Hz
(**) NV(0): Mode "640x480": 31.5 MHz, 36.5 kHz, 70.0 Hz
(==) NV(0): DPI set to (75, 75)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200112022105.fB2L58F22980>