From owner-freebsd-scsi Thu Sep 26 12:14:46 2002 Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4FFF237B401; Thu, 26 Sep 2002 12:14:44 -0700 (PDT) Received: from relay.cigital.com (relay.cigital.com [64.80.176.5]) by mx1.FreeBSD.org (Postfix) with ESMTP id B22FB43E42; Thu, 26 Sep 2002 12:14:43 -0700 (PDT) (envelope-from yanek@cigital.com) Received: by relay.cigital.com (Postfix, from userid 103) id 00FD1BADE; Thu, 26 Sep 2002 15:14:42 -0400 (EDT) Received: from exchange.cigital.com (exchange.cigital.com [10.1.20.3]) by relay.cigital.com (Postfix) with ESMTP id 1FE5BBADB; Thu, 26 Sep 2002 15:14:41 -0400 (EDT) Received: by exchange.cigital.com with Internet Mail Service (5.5.2656.59) id ; Thu, 26 Sep 2002 15:02:03 -0400 Message-ID: <51CC94132526754995E79DCF28C0C34D09BE16@exchange.cigital.com> From: Yanek Korff To: "'freebsd-hardware@freebsd.org'" , "'freebsd-scsi@freebsd.org'" Subject: SCSI controller & NIC problem - irq11 Date: Thu, 26 Sep 2002 15:01:59 -0400 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2656.59) Content-Type: text/plain; charset="iso-8859-1" X-Spam-Status: No, hits=-1.7 required=5.0 tests=DOUBLE_CAPSWORD,AWL version=2.31 X-Spam-Level: Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org Didn't get much response on -STABLE. Anyone on these lists work with this hardware? BTW, the BIOS doesn't allow for changing IRQs of any of this stuff... :( -----Original Message----- From: Yanek Korff [mailto:yanek@cigital.com] Sent: Wednesday, September 25, 2002 16:44 To: 'freebsd-stable@freebsd.org' Subject: SCSI controller & NIC problem - irq11 I'm working on a system with an Intel motherboard (SE7500CW2SCSI) - the one that's being discussed in freebsd-smp right now due to SMP problems, panic on boot when SMP is enabled. That's somewhat beside the point for now... What I'd really like to do is get the integrated SCSI controller working with the sym drivers. LSI chipset listed as LSI Logic* 53C1000 on the Intel website. Here's a piece of the dmesg: sym0: <1010-66> port 0x7000-0x70ff mem 0xfc200000-0xfc201fff,0xfc202000-0xfc2023ff irq 11 at devic e 1.0 on pci3 sym0: Symbios NVRAM, ID 7, Fast-80, SE, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: handling phase mismatch from SCRIPTS. CACHE TEST FAILED: script execution failed. start=7c99f4fc, pc=7c99f4fc, end=7c99f51c sym0: CACHE INCORRECTLY CONFIGURED. device_probe_and_attach: sym0 attach returned 6 There are two onboard NICs on this box and a graphics card using irq11. dmesg | grep "irq 11": sym0: <1010-66> port 0x7000-0x70ff mem 0xfc200000-0xfc201fff,0xfc202000-0xfc2023ff irq 11 at device 1.0 on pci3 pci4: at 3.0 irq 11 fxp0: port 0x8400-0x843f mem 0xfc300000-0xfc31ffff,0xfc341000-0xfc341fff irq 11 at device 4.0 on pci4 fxp1: port 0x8440-0x847f mem 0xfc320000-0xfc33ffff,0xfc342000-0xfc342fff irq 11 at device 5.0 on pci4 pci0: (vendor=0x8086, dev=0x2483) at 31.3 irq 11 Also the PCI NIC isn't showing up -at all- It's likely also trying to use irq11 (it's an XL -- ah... 3com905). Any idea what's going on here? Advice? Can I manually change the IRQs of any of this stuff to get things going? -Yanek. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message