From owner-freebsd-current  Fri Sep  3  8:28:12 1999
Delivered-To: freebsd-current@freebsd.org
Received: from mail.tucows.com (mail.tucows.com [208.229.216.23])
	by hub.freebsd.org (Postfix) with ESMTP id 11B3615075
	for <current@freebsd.org>; Fri,  3 Sep 1999 08:28:02 -0700 (PDT)
	(envelope-from arthur@tucows.com)
Received: from Arthur.Linuxberg (starwars.linuxberg.org [208.229.216.41])
	by mail.tucows.com (8.9.3/8.9.1) with ESMTP id LAA05343
	for <current@freebsd.org>; Fri, 3 Sep 1999 11:28:01 -0400
Received: from localhost (arthur@localhost)
	by Arthur.Linuxberg (8.9.3/8.9.3) with ESMTP id LAA01253
	for <current@freebsd.org>; Fri, 3 Sep 1999 11:27:55 -0400 (EDT)
X-Authentication-Warning: Arthur.Linuxberg: arthur owned process doing -bs
Date: Fri, 3 Sep 1999 11:27:55 -0400 (EDT)
From: "Arthur H. Johnson II" <arthur@tucows.com>
X-Sender: arthur@Arthur.Linuxberg
To: current@freebsd.org
Subject: Sound card problems with -current.
Message-ID: <Pine.BSF.4.10.9909031125170.668-100000@Arthur.Linuxberg>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-current@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.ORG

Well, I got rid of the old Voxware drivers and went with the pnp drivers
and still nothing.  Here is the dmesg:
--
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #11: Fri Sep  3 11:06:20 EDT 1999
    root@Arthur.Linuxberg:/usr/src/sys/compile/ARTHUR
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium/P55C (167.05-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x543  Stepping = 3
  Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory  = 67108864 (65536K bytes)
avail memory = 62185472 (60728K bytes)
Preloaded elf kernel "kernel" at 0xc02cd000.
Intel Pentium detected, installing workaround for F00F bug
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ide_pci0: <Intel PIIX3 Bus-master IDE controller> at device 7.1 on pci0
vga-pci0: <Matrox MGA 1024SG/1064SG/1164SG graphics accelerator> irq 10 at device 10.0 on pci0
xl0: <3Com 3c905B-TX Fast Etherlink XL> irq 11 at device 11.0 on pci0
xl0: Ethernet address: 00:10:4b:c5:24:df
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
wdc0 at port 0x1f0-0x1f7 irq 14 on isa0
wdc0: unit 0 (wd0): <WDC AC23200L>
wd0: 3098MB (6346368 sectors), 6296 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at port 0x170-0x177 irq 15 on isa0
wdc1: unit 0 (atapi): <E285XA/1.00>, removable, dma, iordis
wcd0: drive speed 1377KB/sec, 240KB cache
wcd0: supported read types: CD-DA
wcd0: Audio: play, 255 volume levels
wcd0: Mechanism: ejectable tray
wcd0: Medium: no/blank disc inside, unlocked
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppi0: <generic parallel i/o> on ppbus 0
pcm0: <SoundBlaster 16 4.13> at port 0x220-0x22f irq 5 drq 5 flags 0x15 on isa0
unknown0: <Game> on isa0
unknown1: <Audio> at port 0x240-0x24f,0x300-0x301,0x388-0x38b irq 9 drq 1,7 on isa0
changing root device to wd0s1a
WARNING: / was not properly dismounted
---

and here is the kernel config file:
---
#
# ARTHUR -- Customized kernel for arthur (starwars.linuxberg.org)
#
#	$Id: ARTHUR,v 1.182 1999/08/15 09:54:56 phk Exp $

machine		i386
cpu		I586_CPU
ident		ARTHUR
maxusers	32

#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

options 	MATH_EMULATE		#Support for x87 emulation
options 	INET			#InterNETworking
options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep this!]
options 	MFS			#Memory Filesystem
options 	MFS_ROOT		#MFS usable as root device, "MFS" req'ed
options 	NFS			#Network Filesystem
options 	NFS_ROOT		#NFS usable as root device, "NFS" req'ed
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
options 	CD9660_ROOT		#CD-ROM usable as root. "CD9660" req'ed
options 	PROCFS			#Process filesystem
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	SCSI_DELAY=15000	#Be pessimistic about Joe SCSI device
options 	UCONSOLE		#Allow users to grab the console
options 	USERCONFIG		#boot -c editor
options 	VISUAL_USERCONFIG	#visual boot -c editor
options 	KTRACE			#ktrace(1) syscall trace support
options         SYSVSHM			#SYSV-style shared memory
options         SYSVMSG			#SYSV-style message queues
options         SYSVSEM			#SYSV-style semaphores

# To make an SMP kernel, the next two are needed
#options 	SMP			# Symmetric MultiProcessor Kernel
#options 	APIC_IO			# Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options 	NCPU=2			# number of CPUs
#options 	NBUS=4			# number of busses
#options 	NAPIC=1			# number of IO APICs
#options 	NINTR=24		# number of INTs

controller	isa0
controller	pnp0			# PnP support for ISA
controller	eisa0
controller	pci0

# Floppy drives
controller	fdc0	at isa? port IO_FD1 irq 6 drq 2
disk		fd0	at fdc0 drive 0
disk		fd1	at fdc0 drive 1

# IDE controller and disks
controller	wdc0	at isa? port IO_WD1 irq 14
disk		wd0	at wdc0 drive 0
disk		wd1	at wdc0 drive 1

controller	wdc1	at isa? port IO_WD2 irq 15
disk		wd2	at wdc1 drive 0
disk		wd3	at wdc1 drive 1

# ATAPI devices on wdc?
device		wcd0		#IDE CD-ROM
device		wfd0		#IDE Floppy (e.g. LS-120)
device		wst0		#IDE Tape (e.g. Travan)

# SCSI Controllers
# A single entry for any of these controllers (ncr, ahb, ahc) is
# sufficient for any number of installed devices.
#controller	ncr0		# NCR/Symbios Logic
#controller	ahb0		# EISA AHA1742 family
#controller	ahc0		# AHA2940 and onboard AIC7xxx devices
#controller	isp0		# Qlogic family
#controller      dpt0		# DPT Smartcache - See LINT for options!

#controller	adv0	at isa? port ? irq ?
#controller	adw0
#controller	bt0	at isa? port ? irq ?
#controller	aha0	at isa? port ? irq ?

# SCSI peripherals
# Only one of each of these is needed, they are dynamically allocated.
#controller	scbus0		# SCSI bus (required)
#device		da0		# Direct Access (disks)
#device		sa0		# Sequential Access (tape etc)
#device		cd0		# CD
#device		pass0		# Passthrough device (direct SCSI access)

# Proprietary or custom CD-ROM Interfaces
#device		wt0	at isa? port 0x300 irq 5 drq 1
#device		mcd0	at isa? port 0x300 irq 10
#device		matcd0	at isa? port 0x230
#device		scd0	at isa? port 0x230

# atkbdc0 controls both the keyboard and the PS/2 mouse
controller	atkbdc0	at isa? port IO_KBD
device		atkbd0	at atkbdc? irq 1
device		psm0	at atkbdc? irq 12

device		vga0	at isa? port ? conflicts

# splash screen/screen saver
pseudo-device	splash

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa?

# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa?
#options 	XSERVER			# support for X server
#options 	FAT_CURSOR		# start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options 	PCVT_SCANSET=2		# IBM keyboards are non-std

# Floating point support - do not disable.
device		npx0	at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
device		apm0    at nexus? disable flags 0x31 # Advanced Power Management

# PCCARD (PCMCIA) support
#controller	card0
#device		pcic0	at card?
#device		pcic1	at card?

# Serial (COM) ports
device		sio0	at isa? port IO_COM1 flags 0x10 irq 4
device		sio1	at isa? port IO_COM2 irq 3
#device		sio2	at isa? disable port IO_COM3 irq 5
#device		sio3	at isa? disable port IO_COM4 irq 9

# Parallel port
device		ppc0	at isa? port? flags 0x40 irq 7
controller	ppbus0		# Parallel port bus (required)
#device		lpt0		# Printer
#device		plip0		# TCP/IP over parallel
device		ppi0		# Parallel port interface device
#controller	vpo0		# Requires scbus and da0

controller      miibus0

# PCI Ethernet NICs.
#device		al0		# ADMtek AL981 (``Comet'')
#device		ax0		# ASIX AX88140A
#device		de0		# DEC/Intel DC21x4x (``Tulip'')
#device		fxp0		# Intel EtherExpress PRO/100B (82557,82558)
#device		mx0		# Macronix 98713/98715/98725 (``PMAC'')
#device		pn0		# Lite-On 82c168/82c169 (``PNIC'')
#device		rl0		# RealTek 8129/8139
#device		sf0		# Adaptec AIC-6915 (``Starfire'')
#device		tl0		# Texas Instruments ThunderLAN
#device		tx0		# SMC 9432TX (83c170 ``EPIC'')
#device		vr0		# VIA Rhine, Rhine II
#device		vx0		# 3Com 3c590, 3c595 (``Vortex'')
#device		wb0		# Winbond W89C840F
device		xl0		# 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.
# The probe order of these is presently determined by i386/isa/isa_compat.c.
#device		ed0	at isa? port 0x280 irq 10 iomem 0xd8000
#device		ie0	at isa? port 0x300 irq 10 iomem 0xd0000
#device		ep0	at isa? port 0x300 irq 10
#device		ex0	at isa? port? irq?
#device		fe0	at isa? port 0x300 irq ?
#device		le0	at isa? port 0x300 irq 5 iomem 0xd0000
#device		lnc0	at isa? port 0x280 irq 10 drq 0
#device		cs0	at isa? port 0x300 irq ?
# requires PCCARD (PCMCIA) support to be activated
#device		xe0	at isa? port? irq ?

# PCCARD NIC drivers.
# ze and zp take over the pcic and cannot coexist with generic pccard
# support, nor the ed and ep drivers they replace.
#device		ze0	at isa? port 0x300 irq 10 iomem 0xd8000	
#device		zp0	at isa? port 0x300 irq 10 iomem 0xd8000

# Pseudo devices - the number indicates how many units to allocated.
pseudo-device	loop		# Network loopback
pseudo-device	ether		# Ethernet support
pseudo-device	sl	1	# Kernel SLIP
pseudo-device	ppp	1	# Kernel PPP
pseudo-device	tun		# Packet tunnel, for ppp(1)
pseudo-device	pty		# Pseudo-ttys (telnet etc)
pseudo-device	gzip		# Exec gzipped a.out's

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device	bpf		#Berkeley packet filter

# USB support
#controller	uhci0		# UHCI PCI->USB interface
#controller	ohci0		# OHCI PCI->USB interface
#controller	usb0		# USB Bus (required)
#device		ugen0		# Generic
#device		uhid0		# "Human Interface Devices"
#device		ukbd0		# Keyboard
#device		ulpt0		# Printer
#controller	umass0		# Disks/Mass storage - Requires scbus and da0
#device		ums0		# Mouse

# Sound driver
device 		pcm0
---

I am stumped.

Arthur H. Johnson II
http://www.linuxberg.com
Linuxberg Manager
arthur@tucows.com



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message