Date: Wed, 14 May 2003 10:55:15 -0500 From: "Guy Helmer" <ghelmer@palisadesys.com> To: <smp@freebsd.org> Subject: SuperMicro X5DEI-GG Message-ID: <FPEBKMIFGFHCGLLKBLMMIEAMCCAA.ghelmer@palisadesys.com>
next in thread | raw e-mail | index | archive | help
Has anyone had positive or negative experience with the SuperMicro X5DEI-GG dual-Xeon motherboard? It seems to work OK on a uniprocessor kernel, but FreeBSD 4.8 SMP kernels lock up after the "mounting root" message or after ifconfiging lo0 in the startup scripts. Our first machine may just be flaky, so I'll try another one as soon as possible... It's supposed to have a ServerWorks GC-SL chipset, but dmesg doesn't recognize the specific model. Machine details (dmesg, pciconf, mptable) follow. Thanks, Guy Guy Helmer, Ph.D., Sr. Software Engineer, Palisade Systems, Inc. http://www.palisadesys.com/~ghelmer/ Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-RELEASE #23: Fri May 2 14:20:47 GMT 2003 support@palisadesys.com:PH Timecounter "i8254" frequency 1193182 Hz CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2800.12-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 536805376 (524224K bytes) avail memory = 518397952 (506248K bytes) Preloaded elf kernel "kernel.UP" at 0xc03d1000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 11 entries at 0xc00f4a50 apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard pci0: <PCI bus> on pcib0 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.4.10> port 0xe000-0xe03f mem 0xfeb80000-0xfeb9ffff irq 9 at device 8.0 on pci0 em0: Speed:100 Mbps Duplex:Half em1: <Intel(R) PRO/1000 Network Connection, Version - 1.4.10> port 0xe400-0xe43f mem 0xfeba0000-0xfebbffff irq 11 at device 9.0 on pci0 em1: Speed:N/A Duplex:N/A pci0: <ATI Mach64-GR graphics accelerator> at 11.0 irq 10 atapci0: <Generic PCI ATA controller> port 0xffa0-0xffaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 10 at device 15.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered isab0: <PCI to ISA bridge (vendor=1166 device=0227)> at device 15.3 on pci0 isa0: <ISA bus> on isab0 pcib255: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard pci255: <PCI bus> on pcib255 pcib1: <Host to PCI bridge> on motherboard pci1: <PCI bus> on pcib1 orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 152627MB <WDC WD1600BB-00DAA0> [310101/16/63] at ata0-master BIOSDMA Mounting root from ufs:/dev/ad0s1a WARNING: / was not properly dismounted IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled pciconf: chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x00171166 rev=0x32 hdr=0x00 chip1@pci0:0:1: class=0x060000 card=0x00000000 chip=0x00171166 rev=0x00 hdr=0x00 em0@pci0:8:0: class=0x020000 card=0x004e8086 chip=0x100e8086 rev=0x02 hdr=0x00 em1@pci0:9:0: class=0x020000 card=0x004e8086 chip=0x100e8086 rev=0x02 hdr=0x00 none0@pci0:11:0: class=0x030000 card=0x00081002 chip=0x47521002 rev=0x27 hdr=0x00 chip2@pci0:15:0: class=0x060000 card=0x415515d9 chip=0x02031166 rev=0xa0 hdr=0x00 atapci0@pci0:15:1: class=0x01018a card=0x021211d9 chip=0x02131166 rev=0xa0 hdr=0x00 ohci0@pci0:15:2: class=0x0c0310 card=0x415515d9 chip=0x02211166 rev=0x05 hdr=0x00 isab0@pci0:15:3: class=0x060100 card=0x415515d9 chip=0x02271166 rev=0x00 hdr=0x00 mptable: ============================================================================ === MPTable, version 2.0.15 ---------------------------------------------------------------------------- --- MP Floating Pointer Structure: location: BIOS physical address: 0x000ff780 signature: '_MP_' length: 16 bytes version: 1.4 checksum: 0xe4 mode: Virtual Wire ---------------------------------------------------------------------------- --- MP Config Table Header: physical address: 0x000f0da0 signature: 'PCMP' base table length: 324 version: 1.4 checksum: 0x7f OEM ID: 'AMI ' Product ID: 'GCHE ' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 29 local APIC address: 0xfee00000 extended table length: 124 extended table checksum: 17 ---------------------------------------------------------------------------- --- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 0 0x14 BSP, usable 15 2 7 0xbfebfbff 1 0x14 AP, usable 15 2 7 0xbfebfbff 2 0x14 AP, usable 15 2 7 0xbfebfbff 3 0x14 AP, usable 15 2 7 0xbfebfbff -- Bus: Bus ID Type 0 PCI 1 ISA -- I/O APICs: APIC ID Version State Address 8 0x11 usable 0xfec00000 9 0x11 usable 0xfec01000 10 0x11 usable 0xfec02000 11 0x11 usable 0xfec03000 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# INT active-lo level 0 11:A 9 13 INT active-lo level 0 15:A 9 1 INT active-lo level 0 9:A 9 10 INT active-lo level 0 8:A 9 12 ExtINT active-hi edge 1 0 8 0 INT active-hi edge 1 1 8 1 INT active-hi edge 1 0 8 2 INT active-hi edge 1 3 8 3 INT active-hi edge 1 4 8 4 INT active-hi edge 1 5 8 5 INT active-hi edge 1 6 8 6 INT active-hi edge 1 7 8 7 INT active-hi edge 1 8 8 8 INT active-hi edge 1 12 8 12 INT active-hi edge 1 13 8 13 INT active-hi edge 1 14 8 14 INT active-hi edge 1 15 8 15 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT active-hi edge 1 0 255 0 NMI active-hi edge 0 0:A 255 1 ---------------------------------------------------------------------------- --- MP Config Extended Table Entries: -- System Address Space bus ID: 0 address type: I/O address address base: 0xd000 address range: 0x2000 -- System Address Space bus ID: 0 address type: I/O address address base: 0x0 address range: 0x100 -- System Address Space bus ID: 0 address type: memory address address base: 0xa0000 address range: 0x20000 -- System Address Space bus ID: 0 address type: memory address address base: 0xfcb00000 address range: 0x2100000 -- System Address Space bus ID: 0 address type: prefetch address address base: 0xfca00000 address range: 0x100000 -- Bus Heirarchy bus ID: 1 bus info: 0x01 parent bus ID: 0 -- Compatibility Bus Address bus ID: 0 address modifier: add predefined range: 0x00000000 -- Compatibility Bus Address bus ID: 0 address modifier: add predefined range: 0x00000001 ============================================================================ ===
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?FPEBKMIFGFHCGLLKBLMMIEAMCCAA.ghelmer>