Date: Thu, 5 Nov 1998 16:23:58 +0100 From: "Jeroen C. van Gelderen" <gelderen@mediaport.org> To: <freebsd-scsi@FreeBSD.ORG> Subject: .... Illegal request asc:20,0 .... Message-ID: <000b01be08d0$4efa5140$1400000a@deskfix.local>
next in thread | raw e-mail | index | archive | help
When I reboot (or halt) my 3.0-RELEASE system, I get the following message:
Syncing... 4 4
(da0:ahc0:0:0:0): SYNCHRONIZE CACHE CDB: 35 0 0 0 0 0 0 0 0 0
(da0:ahc0:0:0:0): ILLEGAL REQUEST asc:20,0
(da0:ahc0:0:0:0): Invalid command operation code field replaceable unit: 14
System halted...
I searched the mailing list archives but I couldn't find anything about the
asc:20,0 error (there's plenty about asc:24,0 errors). Can anyone tell me
what's up?? Attached below is my dmesg output, please let me know if you
need more information...
Cheers,
Jeroen
---------------------------------------------
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-RELEASE #8: Thu Nov 5 10:48:54 CET 1998
gelderen@:/usr/src/sys/compile/SERVIX
Timecounter "i8254" frequency 1193182 Hz cost 2684 ns
Timecounter "TSC" frequency 99716539 Hz cost 153 ns
CPU: Pentium/P54C (99.72-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 67108864 (65536K bytes)
avail memory = 63041536 (61564K bytes)
Probing for devices on PCI bus 0:
chip0: <Intel 82437FX PCI cache memory controller> rev 0x01 on pci0.0.0
chip1: <Intel 82371FB PCI to ISA bridge> rev 0x02 on pci0.7.0
ahc0: <Adaptec 2940A Ultra SCSI adapter> rev 0x01 int a irq 5 on pci0.13.0
ahc0: aic7860 Single Channel A, SCSI Id=7, 3/255 SCBs
vga0: <S3 Trio graphics accelerator> rev 0x54 int a irq 11 on pci0.15.0
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x300-0x31f irq 10 on isa
ed0: address 00:20:18:72:93:4e, type NE2000 (16 bit)
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
Intel Pentium F00F detected, installing workaround
Waiting 10 seconds for SCSI devices to settle
da1 at ahc0 bus 0 target 1 lun 0
da1: <DEC DSP3160S 427F> Fixed Direct Access SCSI2 device
da1: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled
da1: 1526MB (3125408 512 byte sectors: 255H 63S/T 194C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <CONNER CFP4207S 4.28GB 1524> Fixed Direct Access SCSI2 device
da0: 5.0MB/s transfers (5.0MHz, offset 15), Tagged Queueing Enabled
da0: 4096MB (8388608 512 byte sectors: 255H 63S/T 522C)
---------------------------------------------
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000b01be08d0$4efa5140$1400000a>