Date: Fri, 22 Jun 2012 12:14:41 +0200 From: rank1seeker@gmail.com To: hackers@freebsd.org, sbruno@freebsd.org Subject: Re: run_interrupt_driven_hooks: ... xpt_config" delay Message-ID: <20120622.101441.643.1@DOMY-PC> In-Reply-To: <1340209936.2858.6.camel@powernoodle.corp.yahoo.com> References: <20120620.100005.305.1@DOMY-PC> <1340209936.2858.6.camel@powernoodle.corp.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
----- Original Message -----=0D=0AFrom: Sean Bruno =
<seanbru@yahoo-inc.com>=0D=0ATo: "rank1seeker@gmail.com" =
<rank1seeker@gmail.com>=0D=0ACc: "hackers@freebsd.org" =
<hackers@freebsd.org>=0D=0ADate: Wed, 20 Jun 2012 09:32:16 =
-0700=0D=0ASubject: Re: run_interrupt_driven_hooks: ... xpt_config" =
delay=0D=0A=0D=0A> On Wed, 2012-06-20 at 03:00 -0700, =
rank1seeker@gmail.com wrote:=0D=0A> > >From 3 machines with that type of =
cutom kernels, only 1 suffers from=0D=0A> > this (and problem is gone, as =
soon as I revert to GENERIC)=0D=0A> =0D=0A> Please post your "custom =
kernel config" somewhere so we can see what is=0D=0A> different.=0D=0A> =
=0D=0A> Sean=0D=0A> =0D=0A=0D=0A=0D=0AHere it is:=0D=0A--=0D=0Aident =
FACTORY=0D=0A=0D=0Amakeoptions DEBUG=3D-g=0D=0A=0D=0Acpu =
HAMMER=0D=0A=0D=0Adevice acpi=0D=0Adevice =
ahci=0D=0Adevice atacore=0D=0Adevice atapci=0D=0Adevice =
atkbd=0D=0Adevice atkbdc=0D=0Adevice =
atpic=0D=0Adevice bpf=0D=0Adevice cd=0D=0Adevice =
cpufreq=0D=0Adevice da=0D=0Adevice dcons=0D=0Adevice =
dcons_crom=0D=0Adevice ehci=0D=0Adevice =
em=0D=0Adevice ether=0D=0Adevice faith=0D=0Adevice =
fdc=0D=0Adevice firewire=0D=0Adevice =
firmware=0D=0Adevice fwe=0D=0Adevice fwip=0D=0Adevice =
gif=0D=0Adevice loop=0D=0Adevice lpt=0D=0Adevice =
md=0D=0Adevice pass=0D=0Adevice =
pci=0D=0Adevice pf=0D=0Adevice plip=0D=0Adevice =
ppbus=0D=0Adevice ppc=0D=0Adevice ppi=0D=0Adevice =
pty=0D=0Adevice random=0D=0Adevice sc=0D=0Adevice =
scbus=0D=0Adevice snd_hda=0D=0Adevice =
sound=0D=0Adevice tun=0D=0Adevice uhci=0D=0Adevice =
umass=0D=0Adevice ums=0D=0Adevice usb=0D=0Adevice =
vga=0D=0Adevice vlan=0D=0Adevice =
wlan=0D=0Adevice wlan_amrr=0D=0Adevice =
wlan_ccmp=0D=0Adevice wlan_tkip=0D=0Adevice =
wlan_wep=0D=0Adevice wlan_xauth=0D=0A=0D=0Aoption =
SC_PIXEL_MODE=0D=0Aoption VESA=0D=0A=0D=0Aoption =
ATA_CAM=0D=0Aoption IEEE80211_AMPDU_AGE=0D=0Aoption =
IEEE80211_DEBUG=0D=0Aoption IEEE80211_SUPPORT_MESH=0D=0Aoption =
SMP=0D=0A=0D=0Aoption CD9660=0D=0Aoption =
FFS=0D=0Aoption MSDOSFS=0D=0Aoption PROCFS=0D=0Aoption =
PSEUDOFS=0D=0Aoption SOFTUPDATES=0D=0Aoption =
UFS_DIRHASH=0D=0A=0D=0Aoption GEOM_LABEL=0D=0Aoption =
GEOM_PART_GPT=0D=0A=0D=0Aoption INET=0D=0Aoption =
INET6=0D=0Aoption SCTP=0D=0A=0D=0Aoption =
COMPAT_43TTY=0D=0Aoption COMPAT_FREEBSD32=0D=0Aoption =
COMPAT_FREEBSD4=0D=0Aoption COMPAT_FREEBSD5=0D=0Aoption =
COMPAT_FREEBSD6=0D=0Aoption COMPAT_FREEBSD7=0D=0Aoption =
FLOWTABLE=0D=0Aoption INCLUDE_CONFIG_FILE=0D=0Aoption =
KBD_INSTALL_CDEV=0D=0Aoption P1003_1B_SEMAPHORES=0D=0Aoption =
PREEMPTION=0D=0Aoption PRINTF_BUFR_SIZE=3D128=0D=0Aoption =
SCHED_ULE=0D=0Aoption SCSI_DELAY=3D1000=0D=0Aoption =
SYSVMSG=0D=0Aoption SYSVSEM=0D=0Aoption =
SYSVSHM=0D=0Aoption =
_KPOSIX_PRIORITY_SCHEDULING=0D=0A--=0D=0A=0D=0A=0D=0ARelevant hang part: =
(always at same place)=0D=0A-------=0D=0Augen1.1: <Intel> at =
usbus1=0D=0Auhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr =
1> on usbus1=0D=0Augen2.1: <Intel> at usbus2=0D=0Auhub2: <Intel EHCI root =
HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2=0D=0Augen3.1: <Intel> at =
usbus3=0D=0Auhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr =
1> on usbus3=0D=0Augen4.1: <Intel> at usbus4=0D=0Auhub4: <Intel UHCI root =
HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4=0D=0Augen5.1: <Intel> at =
usbus5=0D=0Auhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr =
1> on usbus5=0D=0Augen6.1: <Intel> at usbus6=0D=0Auhub6: <Intel EHCI root =
HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6=0D=0Auhub0: 2 ports with =
2 removable, self powered=0D=0Auhub1: 2 ports with 2 removable, self =
powered=0D=0Auhub3: 2 ports with 2 removable, self powered=0D=0Auhub4: 2 =
ports with 2 removable, self powered=0D=0Auhub5: 2 ports with 2 =
removable, self powered=0D=0Auhub2: 4 ports with 4 removable, self =
powered=0D=0Auhub6: 6 ports with 6 removable, self powered=0D=0Augen2.2: =
<vendor 0x0846> at usbus2=0D=0Aurtw0: <vendor 0x0846 product 0x6a00, =
class 0/0, rev 2.00/1.00, addr 2> on usbus2=0D=0Aurtw0: unknown RTL8187L =
type: 0x8000000=0D=0Aurtw0: rtl8187l rf rtl8225u hwrev none=0D=0Augen4.2: =
<Microsoft> at usbus4=0D=0Aums0: <Microsoft Microsoft Basic Optical =
Mouse, class 0/0, rev 1.10/3.90, addr 2> on usbus4=0D=0Aums0: 3 buttons =
and [XYZ] coordinates ID=3D0=0D=0Arun_interrupt_driven_hooks: still =
waiting after 60 seconds for xpt_config=0D=0Aada0 at ahcich0 bus 0 scbus3 =
target 0 lun 0=0D=0Aada0: <ST3320620AS 3.AAK> ATA-7 SATA 1.x =
device=0D=0Aada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO =
8192bytes)=0D=0Aada0: Command Queueing enabled=0D=0Aada0: 305245MB =
(625142448 512 byte sectors: 16H 63S/T 16383C)=0D=0ASMP: AP CPU #1 =
Launched!=0D=0A-------=0D=0A=0D=0A=0D=0ADomagoj Smol=E8i=E6
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120622.101441.643.1>