Date: Fri, 14 Feb 2003 13:12:47 +0100 (MET) From: Peter B <pb@ludd.luth.se> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/48279: bugreport Message-ID: <200302141212.h1ECCld04100@brother.ludd.luth.se>
next in thread | raw e-mail | index | archive | help
>Number: 48279
>Category: kern
>Synopsis: Brooktre878 (bktr) may cause freeze
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Fri Feb 14 04:20:03 PST 2003
>Closed-Date:
>Last-Modified:
>Originator: PB
>Release: FreeBSD 4.7-RELEASE i386
>Organization:
>Environment:
System: FreeBSD 4.7-RELEASE #0: Sat Nov 16 09:33:28 CET 2002 pb@host:/usr/src/sys/compile/XP1800 i386
Kernel configuration file: /usr/src/sys/i386/conf/XP1800
machine i386
cpu I686_CPU
ident GENERIC
maxusers 0
options CPU_ATHLON_SSE_HACK # Mplayer benefits
options CPU_ENABLE_SSE # Mplayer benefits
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
options UFS_DIRHASH #Improve performance on big directories
options MFS #Memory Filesystem
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options USER_LDT #allow user-level control of i386 ldt
options SCSI_DELAY=2000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
device isa
device pci
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
options ATA_STATIC_ID #Static device numbering
device ahc # AHA2940 and onboard AIC7xxx devices
device ncr # NCR/Symbios Logic
# Allow ncr to attach legacy NCR devices when
# both sym and ncr are configured
device scbus # SCSI bus (required)
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
pseudo-device splash
device sc0 at isa? flags 0x100
device npx0 at nexus? port IO_NPX irq 13
device apm0 at nexus? disable flags 0x20 # Advanced Power Management
device smbus # Bus support, required for smb below.
device viapm
device smb
device iicbus # Bus support, required for ic/iic/iicsmb below.
device iicbb
device ic
device iic
device iicsmb # smb over i2c bridge
device pcf0 at isa? port 0x320 irq 5
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
device txp # 3Com 3cR990 (``Typhoon'')
device vx # 3Com 3c590, 3c595 (``Vortex'')
device miibus # MII bus support
device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device pcn # AMD Am79C97x PCI 10/100 NICs
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device ste # Sundance ST201 (D-Link DFE-550TX)
device tl # Texas Instruments ThunderLAN
device tx # SMC EtherPower II (83c170 ``EPIC'')
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
device bge # Broadcom BCM570x (``Tigon III'')
device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
device bktr
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
options IPFIREWALL #firewall
options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
pseudo-device bpf #Berkeley packet filter
device uhci # UHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device uscanner # Scanners
device urio # Diamond Rio MP3 Player
Dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #0: Sat Nov 16 09:33:28 CET 2002
pb@host:/usr/src/sys/compile/XP1800
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(TM) XP 1800+ (1532.91-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<<b19>,AMIE,DSP,3DNow!>
real memory = 268419072 (262128K bytes)
config> di pcic0
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 257306624 (251276K bytes)
Preloaded elf kernel "kernel" at 0xc03d1000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03d109c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00f2050
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 5157 graphics accelerator> at 0.0 irq 11
pci0: <unknown card> (vendor=0x13f6, dev=0x0111) at 5.0 irq 10
pci0: <unknown card> (vendor=0x104c, dev=0x8026) at 7.0 irq 10
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 9 at device 9.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 11 at device 9.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <USB controller> at 9.2 irq 10
bktr0: <BrookTree 878> mem 0xcf000000-0xcf000fff irq 9 at device 12.0 on pci0
iicbb0: <I2C bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicsmb0: <I2C to SMB bridge> on iicbus0
smbus0: <System Management Bus> on iicsmb0
smb0: <SMBus general purpose I/O> on smbus0
iic0: <I2C general purpose I/O> on iicbus0
iicbus1: <Philips I2C bus> on iicbb0 master-only
iicsmb1: <I2C to SMB bridge> on iicbus1
smbus1: <System Management Bus> on iicsmb1
smb1: <SMBus general purpose I/O> on smbus1
iic1: <I2C general purpose I/O> on iicbus1
smbus2: <System Management Bus> on bti2c0
smb2: <SMBus general purpose I/O> on smbus2
bktr0: Warning - card vendor 0xffff (model 0xffff) unknown.
bktr0: Pinnacle/Miro TV, Temic NTSC tuner, remote control.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 12.1 irq 9
ahc0: <Adaptec 19160B Ultra160 SCSI adapter> port 0xa800-0xa8ff mem 0xcb800000-0xcb800fff irq 11 at device 13.0 on pci0
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xa400-0xa41f irq 10 at device 14.0 on pci0
ed0: address 00:80:c8:df:8b:35, type NE2000 (16 bit)
ed1: <NE2000 PCI Ethernet (RealTek 8029)> port 0xa000-0xa01f irq 9 at device 15.0 on pci0
ed1: address 00:80:c8:df:8e:48, type NE2000 (16 bit)
isab0: <PCI to ISA bridge (vendor=1106 device=3147)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233 ATA133 controller> port 0x9800-0x980f irq 0 at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci2: <VIA 83C572 USB controller> port 0x9400-0x941f irq 9 at device 17.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ugen0: OmniVision OV511 Camera, rev 1.00/1.00, addr 2
uhci3: <VIA 83C572 USB controller> port 0x9000-0x901f irq 9 at device 17.3 on pci0
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcf0: <PCF8584 I2C bus controller> at port 0x320-0x321 irq 5 on isa0
iicbus2: <Philips I2C bus> on pcf0 addr 0xaa
iicsmb2: <I2C to SMB bridge> on iicbus2
smbus3: <System Management Bus> on iicsmb2
smb3: <SMBus general purpose I/O> on smbus3
iic2: <I2C general purpose I/O> on iicbus2
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
ad0: 76319MB <ST380021A> [155061/16/63] at ata0-master UDMA100
Waiting 2 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST318438LW 0003> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 19001MB (38914049 512 byte sectors: 64H 32S/T 19001C)
pcm0: <CMedia CMI8738> port 0xb800-0xb8ff irq 10 at device 5.0 on pci0
bktr0: Warning - Unknown Hauppauge Tuner 0xff
cd0 at ahc0 bus 0 target 4 lun 0
cd0: <NEC CD-ROM DRIVE:463 1.05> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
>Description:
Take a i386 computer, install a PCI-Brooktre878 card.
Add 'bktr' device, reboot. Use the computer for a while with
different applications.
Then start fxtv-1.03.. FreeZe!
>How-To-Repeat:
>Fix:
1) Kernel source: Proberbly allocation of memory, or initialisation.
2) Behaviour: Run fxtv at once when x11 is started.
>Release-Note:
>Audit-Trail:
>Unformatted:
X-send-pr-version: 3.113
X-GNATS-Notify:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200302141212.h1ECCld04100>