Date: Fri, 14 Feb 2003 13:12:47 +0100 (MET) From: Peter B <pb@ludd.luth.se> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/48279: bugreport Message-ID: <200302141212.h1ECCld04100@brother.ludd.luth.se>
next in thread | raw e-mail | index | archive | help
>Number: 48279 >Category: kern >Synopsis: Brooktre878 (bktr) may cause freeze >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Fri Feb 14 04:20:03 PST 2003 >Closed-Date: >Last-Modified: >Originator: PB >Release: FreeBSD 4.7-RELEASE i386 >Organization: >Environment: System: FreeBSD 4.7-RELEASE #0: Sat Nov 16 09:33:28 CET 2002 pb@host:/usr/src/sys/compile/XP1800 i386 Kernel configuration file: /usr/src/sys/i386/conf/XP1800 machine i386 cpu I686_CPU ident GENERIC maxusers 0 options CPU_ATHLON_SSE_HACK # Mplayer benefits options CPU_ENABLE_SSE # Mplayer benefits options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options UFS_DIRHASH #Improve performance on big directories options MFS #Memory Filesystem options NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options USER_LDT #allow user-level control of i386 ldt options SCSI_DELAY=2000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev device isa device pci device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives options ATA_STATIC_ID #Static device numbering device ahc # AHA2940 and onboard AIC7xxx devices device ncr # NCR/Symbios Logic # Allow ncr to attach legacy NCR devices when # both sym and ncr are configured device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? pseudo-device splash device sc0 at isa? flags 0x100 device npx0 at nexus? port IO_NPX irq 13 device apm0 at nexus? disable flags 0x20 # Advanced Power Management device smbus # Bus support, required for smb below. device viapm device smb device iicbus # Bus support, required for ic/iic/iicsmb below. device iicbb device ic device iic device iicsmb # smb over i2c bridge device pcf0 at isa? port 0x320 irq 5 device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'') device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') device miibus # MII bus support device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device pcn # AMD Am79C97x PCI 10/100 NICs device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device ste # Sundance ST201 (D-Link DFE-550TX) device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') device bge # Broadcom BCM570x (``Tigon III'') device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000 device bktr pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" options IPFIREWALL #firewall options IPFIREWALL_VERBOSE #enable logging to syslogd(8) options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity pseudo-device bpf #Berkeley packet filter device uhci # UHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uscanner # Scanners device urio # Diamond Rio MP3 Player Dmesg: Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.7-RELEASE #0: Sat Nov 16 09:33:28 CET 2002 pb@host:/usr/src/sys/compile/XP1800 Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(TM) XP 1800+ (1532.91-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0480000<<b19>,AMIE,DSP,3DNow!> real memory = 268419072 (262128K bytes) config> di pcic0 config> di sn0 config> di lnc0 config> di ie0 config> di fe0 config> di ed0 config> di cs0 config> di bt0 config> di aic0 config> di aha0 config> di adv0 config> q avail memory = 257306624 (251276K bytes) Preloaded elf kernel "kernel" at 0xc03d1000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc03d109c. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 11 entries at 0xc00f2050 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <ATI model 5157 graphics accelerator> at 0.0 irq 11 pci0: <unknown card> (vendor=0x13f6, dev=0x0111) at 5.0 irq 10 pci0: <unknown card> (vendor=0x104c, dev=0x8026) at 7.0 irq 10 uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 9 at device 9.0 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 11 at device 9.1 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci0: <USB controller> at 9.2 irq 10 bktr0: <BrookTree 878> mem 0xcf000000-0xcf000fff irq 9 at device 12.0 on pci0 iicbb0: <I2C bit-banging driver> on bti2c0 iicbus0: <Philips I2C bus> on iicbb0 master-only iicsmb0: <I2C to SMB bridge> on iicbus0 smbus0: <System Management Bus> on iicsmb0 smb0: <SMBus general purpose I/O> on smbus0 iic0: <I2C general purpose I/O> on iicbus0 iicbus1: <Philips I2C bus> on iicbb0 master-only iicsmb1: <I2C to SMB bridge> on iicbus1 smbus1: <System Management Bus> on iicsmb1 smb1: <SMBus general purpose I/O> on smbus1 iic1: <I2C general purpose I/O> on iicbus1 smbus2: <System Management Bus> on bti2c0 smb2: <SMBus general purpose I/O> on smbus2 bktr0: Warning - card vendor 0xffff (model 0xffff) unknown. bktr0: Pinnacle/Miro TV, Temic NTSC tuner, remote control. pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 12.1 irq 9 ahc0: <Adaptec 19160B Ultra160 SCSI adapter> port 0xa800-0xa8ff mem 0xcb800000-0xcb800fff irq 11 at device 13.0 on pci0 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xa400-0xa41f irq 10 at device 14.0 on pci0 ed0: address 00:80:c8:df:8b:35, type NE2000 (16 bit) ed1: <NE2000 PCI Ethernet (RealTek 8029)> port 0xa000-0xa01f irq 9 at device 15.0 on pci0 ed1: address 00:80:c8:df:8e:48, type NE2000 (16 bit) isab0: <PCI to ISA bridge (vendor=1106 device=3147)> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8233 ATA133 controller> port 0x9800-0x980f irq 0 at device 17.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci2: <VIA 83C572 USB controller> port 0x9400-0x941f irq 9 at device 17.2 on pci0 usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ugen0: OmniVision OV511 Camera, rev 1.00/1.00, addr 2 uhci3: <VIA 83C572 USB controller> port 0x9000-0x901f irq 9 at device 17.3 on pci0 usb3: <VIA 83C572 USB controller> on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> pcf0: <PCF8584 I2C bus controller> at port 0x320-0x321 irq 5 on isa0 iicbus2: <Philips I2C bus> on pcf0 addr 0xaa iicsmb2: <I2C to SMB bridge> on iicbus2 smbus3: <System Management Bus> on iicsmb2 smb3: <SMBus general purpose I/O> on smbus3 iic2: <I2C general purpose I/O> on iicbus2 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default ad0: 76319MB <ST380021A> [155061/16/63] at ata0-master UDMA100 Waiting 2 seconds for SCSI devices to settle Mounting root from ufs:/dev/da0s1a da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST318438LW 0003> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 19001MB (38914049 512 byte sectors: 64H 32S/T 19001C) pcm0: <CMedia CMI8738> port 0xb800-0xb8ff irq 10 at device 5.0 on pci0 bktr0: Warning - Unknown Hauppauge Tuner 0xff cd0 at ahc0 bus 0 target 4 lun 0 cd0: <NEC CD-ROM DRIVE:463 1.05> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present >Description: Take a i386 computer, install a PCI-Brooktre878 card. Add 'bktr' device, reboot. Use the computer for a while with different applications. Then start fxtv-1.03.. FreeZe! >How-To-Repeat: >Fix: 1) Kernel source: Proberbly allocation of memory, or initialisation. 2) Behaviour: Run fxtv at once when x11 is started. >Release-Note: >Audit-Trail: >Unformatted: X-send-pr-version: 3.113 X-GNATS-Notify: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200302141212.h1ECCld04100>