From owner-freebsd-alpha Mon Dec 9 17:39:43 2002 Delivered-To: freebsd-alpha@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DF2A337B401 for ; Mon, 9 Dec 2002 17:39:33 -0800 (PST) Received: from mail2.sea.registeredsite.com (mail2.sea.registeredsite.com [66.111.73.202]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1C15B43ED8 for ; Mon, 9 Dec 2002 17:39:31 -0800 (PST) (envelope-from opml@terraflux.com) Received: from terraflux.com ([216.122.242.190]) by mail2.sea.registeredsite.com (8.12.6/8.12.6) with ESMTP id gBA1dSea009130; Mon, 9 Dec 2002 20:39:28 -0500 Received: from [192.168.0.40] (dsl-65-184-11-93.telocity.com [65.184.11.93]) by terraflux.com (8.11.0/8.11.0) with ESMTP id gBA1dO519183; Mon, 9 Dec 2002 17:39:25 -0800 (PST) (envelope-from opml@terraflux.com) User-Agent: Microsoft-Entourage/10.1.1.2418 Date: Mon, 09 Dec 2002 17:39:20 -0800 Subject: Re: AlphaServer1200 (5305), FBSD4.7 and Symbios53C875 From: oliver To: Andrew Gallatin Cc: , "Schroeder, Aaron" Message-ID: In-Reply-To: <15861.16028.679747.646378@grasshopper.cs.duke.edu> Mime-version: 1.0 Content-type: text/plain; charset="US-ASCII" Content-transfer-encoding: 7bit Sender: owner-freebsd-alpha@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org Drew, Here is your boot -v; I also included a SRM show device. OK boot -v \|/-\|/Entering /boot/kernel/kernel at 0xfffffc000033a510... sio1: gdb debugging port Unrecognized boot flag '0'. Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-RC1 #0: Mon Dec 9 16:05:50 PST 2002 opi@carmen.terraflux.net:/usr/src/sys/alpha/compile/CARMEN Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc000073a000. AlphaServer 4100 DIGITAL Server 5000 Model 5305 6533A 5/533 4MB, 531MHz 8192 byte page size, 2 processors. CPU: EV56 (21164A) major=7 minor=2 extensions=0x1 OSF PAL rev: 0x4000200020117 real memory = 534757376 (509 MB) Physical memory chunk(s): 0x0075c000 - 0x0fffffff, 260718592 bytes (31826 pages) 0x20000000 - 0x2fff3fff, 268386304 bytes (32762 pages) avail memory = 508575744 (485 MB) smp_start_secondary: starting cpu 1 smp_start_secondary: cpu 1 started FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs Initializing GEOMetry subsystem random: null: mem: mcbus0: pcib0: at mcbus0 gid 7 mid 5 pcib0: Horse Revision 3, Left Handed Saddle Revision 0, CAP Revision 2 pci0: on pcib0 pci0: physical bus=0 map[10]: type 4, range 32, base 01ffee00, size 8, enabled map[14]: type 1, range 32, base 07cfef00, size 8, enabled found-> vendor=0x1000, dev=0x0001, revid=0x02 bus=0, slot=1, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0xff (7650 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=4 found-> vendor=0x1011, dev=0x0024, revid=0x02 bus=0, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=16 (dwords) lattimer=0xff (7650 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) illegal PCI extended capability offset 8266240 map[10]: type 1, range 32, base 07cff000, size 12, enabled map[14]: type 4, range 32, base 01ffef00, size 6, enabled map[18]: type 1, range 32, base 07e00000, size 20, enabled found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0xff (7650 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=16 sym0: <810> port 0x1ffee00-0x1ffeeff mem 0x7cfef00-0x7cfefff irq 4 at device 1.0 on pci0 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking sym0: open drain IRQ line driver sym0: using NCR-generic firmware. sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00 sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/c8/00/00/08/00 sym0: Delay (GEN=11): 266 msec, 33414 KHz sym0: Delay (GEN=11): 283 msec, 31407 KHz sym0: Delay (GEN=11): 282 msec, 31518 KHz sym0: interrupting at IRQ 0x10 intA (vec 0xb40) pcib2: at device 2.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x82f0f000-0x47fffff pcib2: memory decode 0x7d00000-0x7dfffff pcib2: prefetched decode 0x80000000-0x7fffffff pci2: on pcib2 pci2: physical bus=2 map[10]: type 4, range 32, base 01fffd00, size 8, enabled map[14]: type 1, range 32, base 07d9dd00, size 8, enabled map[18]: type 1, range 32, base 07d9e000, size 13, enabled found-> vendor=0x1000, dev=0x000f, revid=0x04 bus=2, slot=0, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0200, cachelnsz=16 (dwords) lattimer=0xff (7650 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns) intpin=a, irq=8 map[10]: type 4, range 32, base 01fffe00, size 8, enabled map[14]: type 1, range 32, base 07d9de00, size 8, enabled map[18]: type 1, range 32, base 07d9f000, size 12, enabled found-> vendor=0x1000, dev=0x000f, revid=0x04 bus=2, slot=1, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0200, cachelnsz=16 (dwords) lattimer=0xff (7650 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns) intpin=a, irq=9 map[10]: type 4, range 32, base 01ffff00, size 7, enabled map[14]: type 1, range 32, base 07d9df00, size 7, enabled found-> vendor=0x1011, dev=0x0009, revid=0x22 bus=2, slot=2, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0280, cachelnsz=16 (dwords) lattimer=0xff (7650 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns) intpin=a, irq=10 sym1: <875> port 0x1fffd00-0x1fffdff mem 0x7d9e000-0x7d9ffff,0x7d9dd00-0x7d9ddff irq 8 at device 0.0 on pci2 pcib2: device sym1 requested decoded memory range 0x7d9dd00-0x7d9ddff pcib2: device sym1 requested decoded memory range 0x7d9e000-0x7d9ffff sym1: Delay (GEN=11): 242 msec, 36728 KHz sym1: Delay (GEN=11): 227 msec, 39155 KHz sym1: Delay (GEN=11): 227 msec, 39155 KHz sym1: chip clock is 39155KHz sym1: clock multiplier assumed sym1: Symbios NVRAM, ID 7, Fast-20, SE, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00 sym1: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/46/80/01/08/24 sym1: Delay (GEN=11): 250 msec, 35553 KHz sym1: Delay (GEN=11): 282 msec, 31518 KHz sym1: Delay (GEN=11): 283 msec, 31407 KHz sym1: interrupting at IRQ 0x0 intA (vec 0xb80) sym1: enabling clock multiplier sym1: Downloading SCSI SCRIPTS. sym2: <875> port 0x1fffe00-0x1fffeff mem 0x7d9f000-0x7d9ffff,0x7d9de00-0x7d9deff irq 9 at device 1.0 on pci2 pcib2: device sym2 requested decoded memory range 0x7d9de00-0x7d9deff pcib2: device sym2 requested decoded memory range 0x7d9f000-0x7d9ffff sym2: failed to allocate RAM resources device_probe_and_attach: sym2 attach returned 6 de0: port 0x1ffff00-0x1ffff7f mem 0x7d9df00-0x7d9df7f irq 10 at device 2.0 on pci2 pcib2: device de0 requested decoded memory range 0x7d9df00-0x7d9df7f de0: interrupting at IRQ 0x0 intA (vec 0xb80) de0: 21140A [10-100Mb/s] pass 2.2 de0: address 00:06:2b:00:0c:c5 de0: enabling 10baseT port de0: bpf attached fxp0: port 0x1ffef00-0x1ffef3f mem 0x7e00000-0x7efffff,0x7cff000-0x7cfffff irq 16 at device 4.0 on pci0 fxp0: using memory space register mapping fxp0: interrupting at IRQ 0x8 intA (vec 0xc00) fxp0: Ethernet address 00:90:27:8e:5c:13 fxp0: PCI IDs: 8086 1229 8086 000c 0008 fxp0: Dynamic Standby mode is disabled inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached pcib1: at mcbus0 gid 7 mid 4 pcib1: Horse Revision 3, Left Handed Saddle Revision 0, CAP Revision 2 pci1: on pcib1 pci1: physical bus=0 found-> vendor=0x8086, dev=0x0482, revid=0x15 bus=0, slot=1, func=0 class=00-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base 04000000, size 26, enabled found-> vendor=0x5333, dev=0x8811, revid=0x44 bus=0, slot=2, func=0 class=88-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x8800, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x88 (34000 ns) eisab0: at device 1.0 on pci1 isa0: on eisab0 pci1: at device 2.0 (no driver attached) Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000 ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0 ata0: interrupting at ISA irq 14 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000 ata1 at port 0x376,0x170-0x177 irq 15 on isa0 ata1: interrupting at ISA irq 15 atkbdc0: at port 0x64,0x60 on isa0 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 atkbd0: irq 1 on atkbdc0 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 atkbd: the current kbd controller command byte 0023 atkbd: keyboard ID 0x83ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000 atkbd0: interrupting at ISA irq 1 fdc0: at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: interrupting at ISA irq 6 mcclock0: at port 0x70-0x71 on isa0 Calibrating clock(s) ... PCC clock: 532800524 Hz (firmware 531914893 Hz) i8254 clock: 1193194 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency ppc0: using extended I/O port range ppc0: SPP ppc0: at port 0x3bc-0x3c3 irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppi0: on ppbus0 lpt0: on ppbus0 lpt0: Polled port ppc0: interrupting at ISA irq 7 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x0> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A, console sio0: interrupting at ISA irq 4 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio1: interrupting at ISA irq 3 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xb8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 a0 9c 8e 8f 28 1f 96 b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39 3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 a0 9c 8e 8f 28 1f 96 b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39 3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff isa_probe_children: probing PnP devices procfs registered Timecounters tick every 0.833 msec Timecounter "i8254" frequency 1193182 Hz lo0: bpf attached Waiting 15 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. sym1: enabling clock multiplier sym1: Downloading SCSI SCRIPTS. (probe5:sym0:0:5:0): Retrying Command (probe0:sym0:0:0:0): Retrying Command (probe5:sym0:0:5:0): error 22 (probe5:sym0:0:5:0): Unretryable Error (probe7:sym1:0:0:0): Retrying Command (probe8:sym1:0:1:0): Retrying Command pass0 at sym0 bus 0 target 0 lun 0 pass0: Fixed Direct Access SCSI-2 device pass0: Serial Number PCB=2011303001 ; HDA=184630210680 pass0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled pass1 at sym0 bus 0 target 5 lun 0 pass1: Removable CD-ROM SCSI-2 device pass1: 10.000MB/s transfers (10.000MHz, offset 8) pass2 at sym1 bus 0 target 0 lun 0 pass2: Fixed Direct Access SCSI-2 device pass2: Serial Number JDV300100FBG8K pass2: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled pass3 at sym1 bus 0 target 1 lun 0 pass3: Fixed Direct Access SCSI-2 device pass3: Serial Number 184732250537 pass3: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da1 at sym1 bus 0 target 0 lun 0 da1: Fixed Direct Access SCSI-2 device da1: Serial Number JDV300100FBG8K da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da1: 4095MB (8388314 512 byte sectors: 255H 63S/T 522C) da2 at sym1 bus 0 target 1 lun 0 da2: Fixed Direct Access SCSI-2 device da2: Serial Number 184732250537 da2: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da2: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C) da0 at sym0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: Serial Number PCB=2011303001 ; HDA=184630210680 da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled da0: 4341MB (8890760 512 byte sectors: 255H 63S/T 553C) cd0 at sym0 bus 0 target 5 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 8) cd0: cd present [517192 x 512 byte records] GEOM: new disk da0 GEOM: new disk da1 GEOM: new disk da2 release_aps: releasing secondary CPUs SMP: AP CPU #1 Launched! GEOM: Add da0 hot[0] start 64 length 276 end 339 GEOM: Configure da0a, start 0 length 134217728 end 134217727 GEOM: Configure da0b, start 134217728 length 1069514752 end 1203732479 GEOM: Configure da0c, start 0 length 4552069120 end 4552069119 GEOM: Configure da0d, start 1203732480 length 268435456 end 1472167935 GEOM: Configure da0e, start 1472167936 length 268435456 end 1740603391 GEOM: Configure da0f, start 1740603392 length 2811465728 end 4552069119 GEOM: Add da1 hot[0] start 64 length 276 end 339 GEOM: Configure da1c, start 0 length 4294816768 end 4294816767 GEOM: Add da2 hot[0] start 64 length 276 end 339 GEOM: Configure da2c, start 0 length 4294817280 end 4294817279 Mounting root from ufs:/dev/da0a start_init: trying /sbin/init hw.bus.devctl_disable: 0 -> 1 Entropy harvesting: interrupts ethernet point_to_point. swapon: adding /dev/da0b as swap device Starting file system checks: /dev/da0a: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/da0a: clean, 17325 free (821 frags, 2063 blocks, 1.3% fragmentation) /dev/da0e: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/da0e: clean, 128918 free (14 frags, 16113 blocks, 0.0% fragmentation) /dev/da0f: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/da0f: clean, 966161 free (22833 frags, 117916 blocks, 1.7% fragmentation) /dev/da0d: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/da0d: clean, 128797 free (37 frags, 16095 blocks, 0.0% fragmentation) Doing initial network setup: hostname. fxp0: flags=8843 mtu 1500 inet 192.168.0.25 netmask 0xffffff00 broadcast 192.168.0.255 inet6 fe80::290:27ff:fe8e:5c13%fxp0 prefixlen 64 tentative scopeid 0x2 ether 00:90:27:8e:5c:13 media: Ethernet autoselect (100baseTX ) status: active lo0: flags=8049 mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff000000 add net default: gateway 192.168.0.20 Additional routing options:. Mounting NFS file systems:. Starting syslogd. Dec 9 17:27:09 carmen syslogd: kernel boot file is /boot/kernel/kernel ELF ldconfig path: /usr/lib /usr/lib/compat Starting local daemons:. Updating motd. Starting sshd. Initial alpha initialization:. Additional ABI support:. Local package initialization:. Additional TCP options:. Starting cron. Starting background file system checks. Mon Dec 9 17:27:34 PST 2002 FreeBSD/alpha (carmen.terraflux.net) (ttyd0) login: DIGITAL Server 5000 Model 5305 6533A Console V6.0-4, 10-MAY-2001 10:11:42 P00>>>show device polling ncr0 (NCR 53C810) slot 1, bus 0 PCI, hose 1 SCSI Bus ID 7 dka0.0.0.1.1 DKA0 QUANTUM XP34550S LXQ1 dka500.5.0.1.1 DKA500 RRD46 1337 polling ncr1 (NCR 53C875) slot 0, bus 2 PCI, hose 1 SCSI Bus ID 7 dkb0.0.0.2000.1 DKB0 SEAGATE ST34371W 0702 dkb100.1.0.2000.1 DKB100 Quantum XP34550J LYJ2 polling ncr2 (NCR 53C875) slot 1, bus 2 PCI, hose 1 SCSI Bus ID 7 polling floppy0 (FLOPPY) PCEB - XBUS hose 0 dva0.0.0.1000.0 DVA0 RX23 polling tulip0 (DECchip 21140-AA) slot 2, bus 2 PCI, hose 1 ewa0.0.0.2002.1 00-06-2B-00-0C-C5 Twisted-Pair polling ei0 (Intel 8255x Ethernet) slot 4, bus 0 PCI, hose 1 eia0.0.0.4.1 00-90-27-8E-5C-13 Twisted-Pair P00>>> Cheers, Oliver On 12/9/02 17:08, "Andrew Gallatin" wrote: > > oliver writes: >> Drew, >> >> Update: I installed the more recent fBSD 5.0 RC-1 (iso) on the temporary >> disk. This time, the two channles on the 875 card appeared recognized (at >> least sym1, but what's with the "faqiled to alloc ram" for sym2 (dmesg)?). >> > > > I"m not sure what's causing this. When you get the machine installed, > please send the output from a verbose boot (hit the space bar at the > boot loaders 9..8..7... countdown and type boot -v) > > The most likely scenario is that the firmware has lied about the > memory behind the 21x52 pci-pci bridge or set something up a little > bit not to our liking. From the dmesg you sent, things look OK, but > we cannot see what memory ranges the bridge is passing from that. > > Drew > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message