Date: Tue, 12 Jan 1999 08:28:01 -0600 (CST) From: Greg Rowe <greg@uswest.net> To: Bob Bishop <rb@gid.co.uk> Cc: freebsd-scsi@FreeBSD.ORG, freebsd-smp@FreeBSD.ORG Subject: Re: Fatal Trap Message-ID: <XFMail.990112082801.greg@uswest.net> In-Reply-To: <l03020900b2c0c6ef335f@[194.32.164.2]>
next in thread | previous in thread | raw e-mail | index | archive | help
They are 2940UW's Revision C. I had 2940UW revision E's in, but I replaced them thinking that was the issue. I can build the system with a Generic kernel, single CPU, and do the tar load with no problems, so it appears to be an SMP issue ??? A dmesg output follows: Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.0-CURRENT #1: Mon Jan 11 09:02:31 CST 1999 root@spare2.oss.uswest.net:/usr/src/sys/compile/TAHITI Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II (quarter-micron) (686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping=2 Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA ,CMOV,PAT,PSE36,MMX,<b24>> real memory = 536870912 (524288K bytes) config> quit avail memory = 518963200 (506800K bytes) Programming 24 pins in IOAPIC #0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xf0309000. Probing for devices on PCI bus 0: chip0: <Intel 82443BX host to PCI bridge> rev 0x02 on pci0.0.0 chip1: <Intel 82443BX host to AGP bridge> rev 0x02 on pci0.1.0 chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0 ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1 chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3 Freeing (NOT implemented) redirected ISA irq 11. ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 16 on pci0.16.0 ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs Freeing (NOT implemented) redirected ISA irq 9. ahc1: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 17 on pci0.17.0 ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs Freeing (NOT implemented) redirected ISA irq 10. vga0: <S3 ViRGE DX/GX graphics accelerator> rev 0x01 int a irq 18 on pci0.18. 0 Freeing (NOT implemented) redirected ISA irq 5. fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x05 int a irq 19 on pci0 .19.0 fxp0: Ethernet address 00:90:27:1d:8e:08 Probing for devices on PCI bus 1: Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface psm0 at 0x60-0x64 irq 12 on motherboard psm0: model Generic PS/2 mouse, device ID 0 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 not found at 0x1f0 wt0 not found at 0x300 mcd0 not found at 0x300 matcdc0 not found at 0x230 scd0 not found at 0x230 adv0 not found at 0x330 bt0 not found at 0x134 aha0 not found at 0x134 npx0 on motherboard npx0: INT 16 interface APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via pin 2 Waiting 15 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! changing root device to da0s1a da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST34573W 6244> Fixed Direct Access SCSI-2 device da0: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C) da1 at ahc1 bus 0 target 0 lun 0 da1: <SEAGATE ST39173W 6244> Fixed Direct Access SCSI-2 device da1: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled da1: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) da3 at ahc1 bus 0 target 2 lun 0 da3: <SEAGATE ST39173W 6244> Fixed Direct Access SCSI-2 device da3: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled da3: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) da2 at ahc1 bus 0 target 1 lun 0 da2: <SEAGATE ST39173W 6244> Fixed Direct Access SCSI-2 device da2: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled da2: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) WARNING: / was not properly dismounted (da3:ahc1:0:2:0): tagged openings now 64 (da0:ahc0:0:0:0): tagged openings now 61 (da0:ahc0:0:0:0): tagged openings now 60 (da0:ahc0:0:0:0): tagged openings now 59 (da0:ahc0:0:0:0): tagged openings now 58 (da0:ahc0:0:0:0): tagged openings now 57 (da0:ahc0:0:0:0): tagged openings now 56 (da0:ahc0:0:0:0): tagged openings now 55 (da0:ahc0:0:0:0): tagged openings now 54 (da0:ahc0:0:0:0): tagged openings now 53 (da0:ahc0:0:0:0): tagged openings now 52 (da0:ahc0:0:0:0): tagged openings now 51 (da0:ahc0:0:0:0): tagged openings now 50 (da0:ahc0:0:0:0): tagged openings now 49 (da1:ahc1:0:0:0): tagged openings now 64 (da1:ahc1:0:0:0): tagged openings now 63 (da1:ahc1:0:0:0): tagged openings now 62 (da1:ahc1:0:0:0): tagged openings now 61 (da1:ahc1:0:0:0): tagged openings now 60 (da1:ahc1:0:0:0): tagged openings now 59 (da1:ahc1:0:0:0): tagged openings now 58 (da1:ahc1:0:0:0): tagged openings now 57 (da1:ahc1:0:0:0): tagged openings now 56 (da1:ahc1:0:0:0): tagged openings now 55 (da1:ahc1:0:0:0): tagged openings now 54 (da1:ahc1:0:0:0): tagged openings now 53 (da1:ahc1:0:0:0): tagged openings now 52 (da1:ahc1:0:0:0): tagged openings now 51 (da1:ahc1:0:0:0): tagged openings now 50 (da1:ahc1:0:0:0): tagged openings now 49 On 12-Jan-99 Bob Bishop wrote: > Hi, > > At 5:08 pm -0600 11/1/99, Greg Rowe wrote: >> I have a Tyan mb dual 400mhz system I'm building that's getting repeatable >>crashes under disk load. This didn't occur until I compiled an SMP kernel. >>I'm >>running -current as of last Friday and the system has 512mb of memory and 4 >>drives on Adaptec controllers (1 - 4gig on one controller and 3 - 9gig on the >>other). [etc] > > What Adaptec controllers, precisely? > > > -- > Bob Bishop (0118) 977 4017 international code +44 118 > rb@gid.co.uk fax (0118) 989 4254 between 0800 and 1800 UK > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-smp" in the body of the message Greg Rowe <greg@uswest.net> US WEST - Internet Service Operations "The telephone, for those of you who have forgotten, was a commonly used communications technology in the days before electronic mail. They're still easy to find in most large cities." -- Nathaniel Borenstein To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?XFMail.990112082801.greg>