Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 27 Feb 2015 23:28:24 +0100
From:      Christian Baer <christian.baer@uni-dortmund.de>
To:        freebsd-questions@freebsd.org
Subject:   Am I too dumb to mount an SD-card?
Message-ID:  <9107632.xkY3nEPMJS@falbala.rz1.convenimus.net>

next in thread | raw e-mail | index | archive | help
Hey everyone!

I decided to give a few pieces of software a spin, so that I could possibly 
use FreeBSD for my photo stuff aswell.

My problem is that I can't mount the SD-card from my camera (Pentax K-3). 
It's formatted exFAT (I am guessing) by the camera.

I stuck the card into the card reader and there is a device there for it to:

/dev/da1 and /dev/da1s1

However, mounting does not work:

mount.exfat-fuse /dev/da1s1 /mnt/sdcard/
FUSE exfat 1.0.1
fuse: failed to open fuse device: No such file or directory

It seems to be there (last one):

camcontrol devlist
<WDC WD6401AALS-00L3B2 01.03B01>   at scbus0 target 0 lun 0 (ada0,pass0)
<Hitachi HDS721075KLA330 GK8OAB0A>  at scbus1 target 0 lun 0 (ada1,pass1)
<Samsung SSD 840 PRO Series DXM06B0Q>  at scbus2 target 0 lun 0 (ada2,pass2)
<PIONEER BD-RW   BDR-209D 1.10>    at scbus6 target 0 lun 0 (pass3,cd0)
<AHCI SGPIO Enclosure 1.00 0001>   at scbus8 target 0 lun 0 (pass4,ses0)
<Generic- Compact Flash 1.01>      at scbus9 target 0 lun 0 (da0,pass5)
<Multiple Flash Reader 1.05>       at scbus9 target 0 lun 1 (da1,pass6)

And it is definately the one with something plugged in... :-)

kernel: ugen2.3: <vendor 0x058f> at usbus2
kernel: umass0: <vendor 0x058f product 0x6361, class 0/0, rev 2.00/1.00, 
addr 2> on usbus2
kernel: umass0:  SCSI over Bulk-Only; quirks = 0x4001
kernel: umass0:9:0:-1: Attached to scbus9
kernel: da0 at umass-sim0 bus 0 scbus9 target 0 lun 0
kernel: da0: <Generic- Compact Flash 1.01> Removable Direct Access SCSI-0 
device 
kernel: da0: 40.000MB/s transfers
kernel: da0: Attempt to query device size failed: NOT READY, Medium not 
present
kernel: da0: quirks=0x2<NO_6_BYTE>
kernel: da1 at umass-sim0 bus 0 scbus9 target 0 lun 1
kernel: da1: <Multiple Flash Reader 1.05> Removable Direct Access SCSI-0 
device 
kernel: da1: 40.000MB/s transfers
kernel: da1: 60906MB (124735488 512 byte sectors: 255H 63S/T 7764C)
kernel: da1: quirks=0x2<NO_6_BYTE>

In some forum I read something about having to start fusefs as a service or 
loadable kernel module. However, I could not find a start script for fuse 
after installing it nor could I find a klm.

What piece of the puzzle am I missing (again)?

Y'all have a good night! :-)
Chris




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9107632.xkY3nEPMJS>