Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 25 May 2001 16:52:53 -0400 (EDT)
From:      Joe Clarke <marcus@miami.edu>
To:        Cy Schubert - ITSD Open Systems Group <Cy.Schubert@uumail.gov.bc.ca>
Cc:        Matt Dillon <dillon@earth.backplane.com>, "Justin T. Gibbs" <gibbs@scsiguy.com>, stable@FreeBSD.ORG
Subject:   Re: Continuing ahc problems - also cause fxp failure
Message-ID:  <Pine.OSF.4.31.0105251652260.2058-100000@jaguar.ir.miami.edu>
In-Reply-To: <200105242304.f4ON4sB02245@cwsys.cwsent.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Yeah, checkout

http://www.adaptec.com/worldwide/support/drivers_by_product.html?cat=%2FProduct%2FAHA-2940U2W&prodkey=AHA-2940U2W

at the bottom of the page for BIOS updates to the 2940-U2W card.

Joe Clarke

On Thu, 24 May 2001, Cy Schubert - ITSD Open Systems Group wrote:

> In message <200105241705.f4OH5r826304@earth.backplane.com>, Matt Dillon
> writes:
> >
> > :
> > :In message <Pine.OSF.4.31.0105231947350.28125-100000@jaguar.ir.miami.edu
> > :>, Joe
> > :Clarke writes:
> > :> Matt, I know you've probably heard a lot of responses to this, but I have
> > :> a system very similar to yours that I use in production with vinum
> > :> striping across 12 18 GB drives hooked up to an Adaptec U2W.  I ran into
> > :> this problem, and I upgraded the BIOS on the card.  As soon as I did that,
> > :> everything runs beautifully.
> > :
> > :Just for the record, what SCSI BIOS level did you upgrade from and to?
> > :
> > :
> > :Regards,                         Phone:  (250)387-8437
> > :Cy Schubert                        Fax:  (250)387-5766
> >
> >     There's a SCSI bios in the adaptec itself that can be upgraded?
>
> I could be wrong but I understand yes it can be.
>
>
> Regards,                         Phone:  (250)387-8437
> Cy Schubert                        Fax:  (250)387-5766
> Team Leader, Sun/Alpha Team   Internet:  Cy.Schubert@osg.gov.bc.ca
> Open Systems Group, ITSD, ISTA
> Province of BC
>
>
>
>
>


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.OSF.4.31.0105251652260.2058-100000>