Date: Mon, 29 Apr 2013 12:14:49 +0200 From: Paul Schenkeveld <freebsd@psconsult.nl> To: wireless@freebsd.org Subject: State os VAP support Message-ID: <20130429101449.GA27298@psconsult.nl>
next in thread | raw e-mail | index | archive | help
Hi,
I still cannot get VAP's to work, perhaps I'm doing something wrong,
perhaps VAP support isn't ready yet.
My hardware: Soekris net4826 with Atheros 5212 mini-pci card
My FreeBSD: FreeBSD 10.0-CURRENT #0 r249745
My config:
wlans_ath0="wlan63 wlan207"
create_args_wlan63="wlanmode hostap mode 11g channel 7 country NL"
create_args_wlan207="wlanmode hostap mode 11g channel 7 country NL"
hostapd_config="/etc/hostapd.conf.testB /etc/hostapd.conf.testO"
==== hostapd.conf.testB:
driver=bsd
interface=wlan63
ctrl_interface=/var/run/hostapd.wlan63
ctrl_interface_group=wheel
ssid=testB
wpa=1
wpa_passphrase=********
wpa_key_mgmt=WPA-PSK
wpa_pairwise=CCMP TKIP
==== hostapd.conf.testO:
driver=bsd
interface=wlan207
ctrl_interface=/var/run/hostapd.wlan207
ctrl_interface_group=wheel
ssid=testO
wpa=1
wpa_passphrase=********
wpa_key_mgmt=WPA-PSK
wpa_pairwise=CCMP TKIP
I have tried running a single hostapd with two config files and running
two separate hostapd daemons each with a config file. In both cases, I
get one wlan working, the other does not work. Running hostapd with -d
does not reveal the problem to me either (I see debug output when
connecting to the working wlan but not when trying to connect to the
other one). Hostapd debug output is below.
My questions:
Should VAP work at all?
Does anyone know of VAP problems with the Atheros 5212?
Should I run one hostapd with multiple config files or separate daemons?
Anything else I'm doing wrong?
Thanks for any help!
Paul Schenkeveld
------------------------------------------------------------------------
hostapd -d output:
ap1# hostapd -P /var/run/hostapd.pid -d /etc/hostapd.conf.testB /etc/hostapd.conf.testO
Configuration file: /etc/hostapd.conf.testB
ctrl_interface_group=0 (from group name 'wheel')
BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
Completing interface initialization
Flushing old station entries
Deauthenticate all stations
bsd_set_privacy: enabled=0
bsd_set_key: alg=0 addr=0x0 key_idx=0 set_tx=1 seq_len=0 key_len=0
bsd_del_key: key_idx=0
bsd_set_key: alg=0 addr=0x0 key_idx=1 set_tx=0 seq_len=0 key_len=0
bsd_del_key: key_idx=1
bsd_set_key: alg=0 addr=0x0 key_idx=2 set_tx=0 seq_len=0 key_len=0
bsd_del_key: key_idx=2
bsd_set_key: alg=0 addr=0x0 key_idx=3 set_tx=0 seq_len=0 key_len=0
bsd_del_key: key_idx=3
Using interface wlan63 with hwaddr 00:0b:6b:dd:50:7b and ssid 'testB'
Deriving WPA PSK based on passphrase
SSID - hexdump_ascii(len=5):
74 65 73 74 42 testB
PSK (ASCII passphrase) - hexdump_ascii(len=8): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
bsd_set_ieee8021x: enabled=1
bsd_configure_wpa: enable WPA= 0x1
WPA: group state machine entering state GTK_INIT (VLAN-ID 0)
GMK - hexdump(len=32): [REMOVED]
GTK - hexdump(len=32): [REMOVED]
WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0)
bsd_set_key: alg=2 addr=0x0 key_idx=1 set_tx=1 seq_len=0 key_len=32
bsd_set_privacy: enabled=1
bsd_set_opt_ie: set WPA+RSN ie (len 28)
wlan63: Setup of interface done.
Configuration file: /etc/hostapd.conf.testO
ctrl_interface_group=0 (from group name 'wheel')
BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
Completing interface initialization
Flushing old station entries
Deauthenticate all stations
bsd_set_privacy: enabled=0
bsd_set_key: alg=0 addr=0x0 key_idx=0 set_tx=1 seq_len=0 key_len=0
bsd_del_key: key_idx=0
bsd_set_key: alg=0 addr=0x0 key_idx=1 set_tx=0 seq_len=0 key_len=0
bsd_del_key: key_idx=1
bsd_set_key: alg=0 addr=0x0 key_idx=2 set_tx=0 seq_len=0 key_len=0
bsd_del_key: key_idx=2
bsd_set_key: alg=0 addr=0x0 key_idx=3 set_tx=0 seq_len=0 key_len=0
bsd_del_key: key_idx=3
Using interface wlan207 with hwaddr 00:0b:6b:dd:50:7b and ssid 'testO'
Deriving WPA PSK based on passphrase
SSID - hexdump_ascii(len=5):
74 65 73 74 4f testO
PSK (ASCII passphrase) - hexdump_ascii(len=8): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
bsd_set_ieee8021x: enabled=1
bsd_configure_wpa: enable WPA= 0x1
WPA: group state machine entering state GTK_INIT (VLAN-ID 0)
GMK - hexdump(len=32): [REMOVED]
GTK - hexdump(len=32): [REMOVED]
WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0)
bsd_set_key: alg=2 addr=0x0 key_idx=1 set_tx=1 seq_len=0 key_len=32
bsd_set_privacy: enabled=1
bsd_set_opt_ie: set WPA+RSN ie (len 28)
wlan207: Setup of interface done.
Discard routing message to if#0 (not for us 10)
Discard routing message to if#0 (not for us 11)
Discard routing message to if#0 (not for us 10)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20130429101449.GA27298>