Date: Mon, 13 Apr 1998 18:31:52 -0700 (PDT) From: "Jonathan M. Bresler" <jmb> To: child@healing.edunet.aus.net (Child) Cc: mobile@FreeBSD.ORG Subject: Re: PCMCIA:can this be done? Message-ID: <199804140131.SAA13257@hub.freebsd.org> In-Reply-To: <3.0.3.32.19980413120405.00d7e8e4@192.168.0.10> from Child at "Apr 13, 98 12:04:05 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
why not ask on freebsd-mobile, thats the list for PCMCIA stuff. i'll send yrou questions there. jmb Child wrote: > Dear All.. i have a PINE NE2000 compat PCMCIA card in my notebook runing > 2.2.5-REL and I cant seem to get it to work i'm unsure if it can work at all > anyone help me out here??? > > pccardc dumpcis is attached below > > Thnka... > > Jeremy Samual Sommer > > Configuration data for card in slot 1 > Tuple #1, code = 0x1 (Common memory descriptor), length = 3 > 000: dc 00 ff > Common memory device information: > Device number 1, type Function specific, WPS = ON > Speed = 100nS, Memory block size = 512b, 1 units > Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3 > 000: 49 00 ff > Attribute memory device information: > Device number 1, type EEPROM, WPS = ON > Speed = 250nS, Memory block size = 512b, 1 units > Tuple #3, code = 0x21 (Functional ID), length = 2 > 000: 06 03 > Network/LAN adapter - POST initialize - Card has ROM > Tuple #4, code = 0x15 (Version 1 info), length = 27 > 000: 04 01 50 43 4d 43 49 41 00 45 74 68 65 72 6e 65 > 010: 74 20 43 61 72 64 00 00 00 00 ff > Version = 4.1, Manuf = [PCMCIA],card vers = [Ethernet Card] > Addit. info = [],[] > Tuple #5, code = 0x13 (Link target), length = 3 > 000: 43 49 53 > Tuple #6, code = 0x1a (Configuration map), length = 5 > 000: 01 24 f8 03 03 > Reg len = 2, config register addr = 0x3f8, last config = 0x24 > Registers: XX------ > Tuple #7, code = 0x1b (Configuration entry), length = 17 > 000: e0 81 1d 3f 55 4d 5d 06 86 46 26 fc 24 65 30 ff > 010: ff > Config index = 0x20(default) > Interface byte = 0x81 (I/O) wait signal supported > Vcc pwr: > Nominal operating supply voltage: 5 x 1V > Minimum operating supply voltage: 4.5 x 1V > Maximum operating supply voltage: 5.5 x 1V > Continuous supply current: 1 x 100mA > Max current average over 1 second: 1 x 100mA, ext = 0x46 > Max current average over 10 ms: 2 x 100mA > Wait scale Speed = 1.5 x 10 us > Card decodes 4 address lines, 8 Bit I/O only > IRQ modes: Level > IRQ level = 4 > Tuple #8, code = 0x1b (Configuration entry), length = 7 > 000: 20 08 ca 60 00 03 1f > Config index = 0x20 > Card decodes 10 address lines, limited 8/16 Bit I/O > I/O address # 1: block start = 0x300 block length = 0x20 > Tuple #9, code = 0x1b (Configuration entry), length = 7 > 000: 21 08 ca 60 20 03 1f > Config index = 0x21 > Card decodes 10 address lines, limited 8/16 Bit I/O > I/O address # 1: block start = 0x320 block length = 0x20 > Tuple #10, code = 0x1b (Configuration entry), length = 7 > 000: 22 08 ca 60 40 03 1f > Config index = 0x22 > Card decodes 10 address lines, limited 8/16 Bit I/O > I/O address # 1: block start = 0x340 block length = 0x20 > Tuple #11, code = 0x1b (Configuration entry), length = 7 > 000: 23 08 ca 60 60 03 1f > Config index = 0x23 > Card decodes 10 address lines, limited 8/16 Bit I/O > I/O address # 1: block start = 0x360 block length = 0x20 > Tuple #12, code = 0x20 (Manufacturer ID), length = 4 > 000: 01 8a 00 01 > PCMCIA ID = 0x8a01, OEM ID = 0x100 > Tuple #13, code = 0x14 (No link), length = 0 > Tuple #14, code = 0xff (Terminator), length = 0 > 2 slots found > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199804140131.SAA13257>